Re: Linux Client on Debian?
On Friday 06 December 2002 00:44, Mark D. Rodriguez wrote: > Hi, > > Has anyone succesfully run a Linux client on a Debian distro? I was > going to try using alien to turn the .rpm into a .deb files and give it > a try. ANybody got any other suggestions? I tried it with alien and rpm and both worked. Same for the server. Stef -- [EMAIL PROTECTED] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net
Linux Client on Debian?
Hi, Has anyone succesfully run a Linux client on a Debian distro? I was going to try using alien to turn the .rpm into a .deb files and give it a try. ANybody got any other suggestions? -- Regards, Mark D. Rodriguez President MDR Consulting, Inc. === MDR Consulting The very best in Technical Training and Consulting. IBM Advanced Business Partner SAIR Linux and GNU Authorized Center for Education IBM Certified Advanced Technical Expert, CATE AIX Support and Performance Tuning, RS6000 SP, TSM/ADSM and Linux Red Hat Certified Engineer, RHCE ===
smnode.c Error obtaining copy group
Dear All, I could have sworn I had seen this posted somewhere but bizarrely cannot locate it now when I really need it. I've been backing up happily over the LAN with TDP for R/3 3.2.0.12 to a TSM 4.2.3 server on AIX. Now I've switched back to lanfree. The Storage Agent is at the same level as the server. I'm getting the following message on the server. ANRD (Session: 60041, Origin: GISR07_SA) smnode.c(7828): ThreadId<11> Error obtaining copy group name for ID 1 during Session 4849. I seem to remember there was some mention of difficulties in rebinding between management classes when moving between lanfree backups and lan backups, however I thought the problem only showed itself if you tried to change the management class whilst using lanfree and that the 'cure' was to send data over the lan where it would successfully rebind. I've been off lanfree for a few weeks - true, the management class whilst on the lan has been successfully changed. Just what is the story here? Thanks to anyone who can shine a light on this - and I steel myself for a scolding if this has indeed already been mentioned. Regards, Eric Winters Sydney Australia
4.2.3 Upgradedb slow
I have just installed the 4.2.3 server upgrade and have been running the UPGRADEDB process for almost 3 hours now. Has anyone else experienced this and, if so, how long will this take. In the past, it has only run a couple of minutes. This is an upgrade from 4.2.2 on OS/390 R10. DB is about 11GB 85% used. Thanks Sam Sheppard San Diego Data Processing Corp. (858)-581-9668
Re: 98 Workstation backup problem
Commtimeout is actual 60 by default. A number pretty much every customer out there should increase. Both 600 and 1500 seconds have worked well for me in the past. -- Joshua S. Bassi IBM Certified - AIX 4/5L, SAN, Shark Tivoli Certified Consultant -ADSM/TSM eServer Systems Expert -pSeries HACMP AIX, HACMP, Storage, TSM Consultant Cell (831) 595-3962 [EMAIL PROTECTED] -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of Nelson, Doug Sent: Thursday, December 05, 2002 11:38 AM To: [EMAIL PROTECTED] Subject: Re: 98 Workstation backup problem COMMTIMEOUT defaults to 600, try increasing it to 1500. You can also play with the transfer block size TXNBYTELIMIT. Douglas C. Nelson Distributed Computing Consultant Alltel Information Services Chittenden Data Center 2 Burlington Square Burlington, Vt. 05401 802-660-2336 -Original Message- From: Anderson, Michael - HMIS [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 12:50 PM To: [EMAIL PROTECTED] Subject: 98 Workstation backup problem I am having a problem with one of my workstation clients. The backup seems to be running fine until it hits the users pst file which is over 1 gb. When it gets to this file it starts to back it up but then after a while just hangs. The client side only shows the following message in the dsmerror.log " failure in communications open call rc: -50" My activity log just shows client terminated, did not respond in seconds. If I exclude her pst file the backup runs fine. Although her NIC is set at auto, the transfer rate shows very good. Anybody have any suggestions? Server is 4.2.3.0 on AIX 4.3.3 Client is 4.1.3 on Windows 98 workstation Mike Anderson [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
Re: 98 Workstation backup problem
COMMTIMEOUT defaults to 600, try increasing it to 1500. You can also play with the transfer block size TXNBYTELIMIT. Douglas C. Nelson Distributed Computing Consultant Alltel Information Services Chittenden Data Center 2 Burlington Square Burlington, Vt. 05401 802-660-2336 -Original Message- From: Anderson, Michael - HMIS [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 12:50 PM To: [EMAIL PROTECTED] Subject: 98 Workstation backup problem I am having a problem with one of my workstation clients. The backup seems to be running fine until it hits the users pst file which is over 1 gb. When it gets to this file it starts to back it up but then after a while just hangs. The client side only shows the following message in the dsmerror.log " failure in communications open call rc: -50" My activity log just shows client terminated, did not respond in seconds. If I exclude her pst file the backup runs fine. Although her NIC is set at auto, the transfer rate shows very good. Anybody have any suggestions? Server is 4.2.3.0 on AIX 4.3.3 Client is 4.1.3 on Windows 98 workstation Mike Anderson [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
98 Workstation backup problem
I am having a problem with one of my workstation clients. The backup seems to be running fine until it hits the users pst file which is over 1 gb. When it gets to this file it starts to back it up but then after a while just hangs. The client side only shows the following message in the dsmerror.log " failure in communications open call rc: -50" My activity log just shows client terminated, did not respond in seconds. If I exclude her pst file the backup runs fine. Although her NIC is set at auto, the transfer rate shows very good. Anybody have any suggestions? Server is 4.2.3.0 on AIX 4.3.3 Client is 4.1.3 on Windows 98 workstation Mike Anderson [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
Re: Help on schedule object field
I imagine that you want to back up the files within these directories, not just the directory entries themselves; in which case, you need the terminating slash at the end of the directory name. Also, use a blank space to separate directory names, not a comma. Try this: OBJECTS='/usr/sybase/backups/ /usr/unify/temp/' If you wish to back up subdirectories within these directories, then you will also need (if you don't already have it): OPTIONS=-SUBDIR=YES Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS Internet e-mail: [EMAIL PROTECTED] (change eye to i to reply) The only dumb question is the one that goes unasked. The command line is your friend. "Good enough" is the enemy of excellence. Cinda Mullen <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 12/05/2002 12:14 Please respond to "ADSM: Dist Stor Manager" To: [EMAIL PROTECTED] cc: Subject:Help on schedule object field Greetings...I need help, again... We are trying to perform an incr backup for two directories coded in the objects field in our schedule. We have tried several variations but, just can't seem to get it to work:) OBJECTS='"/usr/sybase/backups,/usr/unify/temp"' we have tried single quotes, double quotes, no comma, comma, and apparently can't find the right mix. Any experience on this would be much appreciated!!! Thanks in advance!! Cinda Mullen Ascension Health ISD NOTE: This e-mail message may contain information that may be privileged, confidential, and exempt from disclosure. It is intended for use only by the person to whom it is addressed. If you have received this message in error, please do not forward or use this information in any way, delete it immediately, and contact the sender as soon as possible by the reply option or by telephone at the telephone number listed (if available). Thank you.
Re: Help on schedule object field
Cinda, Did you try something like this: OBJECTS='"/usr/sybase/backups" "/usr/unify/temp"' Sias Get your own "800" number Voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag On, Cinda Mullen ([EMAIL PROTECTED]) wrote: > Greetings...I need help, again... > > We are trying to perform an incr backup for two directories coded in the > objects field in our schedule. We have tried several variations but, > just can't seem to get it to work:) > > OBJECTS='"/usr/sybase/backups,/usr/unify/temp"' > > we have tried single quotes, double quotes, no comma, comma, and > apparently can't find the right mix. Any experience on this would be > much appreciated!!! > > Thanks in advance!! > > Cinda Mullen > Ascension Health ISD > > > > NOTE: This e-mail message may contain information that may be privileged, > confidential, and exempt from disclosure. It is intended for use only by > the person to whom it is addressed. If you have received this message in > error, please do not forward or use this information in any way, delete it > immediately, and contact the sender as soon as possible by the reply option > or by telephone at the telephone number listed (if available). Thank you. > >
Help on schedule object field
Greetings...I need help, again... We are trying to perform an incr backup for two directories coded in the objects field in our schedule. We have tried several variations but, just can't seem to get it to work:) OBJECTS='"/usr/sybase/backups,/usr/unify/temp"' we have tried single quotes, double quotes, no comma, comma, and apparently can't find the right mix. Any experience on this would be much appreciated!!! Thanks in advance!! Cinda Mullen Ascension Health ISD NOTE: This e-mail message may contain information that may be privileged, confidential, and exempt from disclosure. It is intended for use only by the person to whom it is addressed. If you have received this message in error, please do not forward or use this information in any way, delete it immediately, and contact the sender as soon as possible by the reply option or by telephone at the telephone number listed (if available). Thank you.
Re: TSM Client Software Fixes URL/FTP site
Start here: ftp://service.boulder.ibm.com/storage/tivoli-storage-management/maintenance/ Luke Gerald Wichmann wrote: > Whats the URL or FTP site these days to download client fixes? I've been > jumping around the new ibm site and it made me register, but hasn't provided > me with a password (says within 3 days). So I'm curious if theres a direct > URL I can get to it with. > > Gerald Wichmann > Senior Systems Development Engineer > Zantaz, Inc. > 925.598.3099 (w) > > This e-mail has been captured and archived by the ZANTAZ Digital Safe(tm) > service. For more information, visit us at www.zantaz.com. > IMPORTANT: This electronic mail message is intended only for the use of the > individual or entity to which it is addressed and may contain information > that is privileged, confidential or exempt from disclosure under applicable > law. If the reader of this message is not the intended recipient, or the > employee or agent responsible for delivering this message to the intended > recipient, you are hereby notified that any dissemination, distribution or > copying of this communication is strictly prohibited. If you have received > this communication in error, please notify the sender immediately by > telephone or directly reply to the original message(s) sent. Thank you.
TSM Client Software Fixes URL/FTP site
Whats the URL or FTP site these days to download client fixes? I've been jumping around the new ibm site and it made me register, but hasn't provided me with a password (says within 3 days). So I'm curious if theres a direct URL I can get to it with. Gerald Wichmann Senior Systems Development Engineer Zantaz, Inc. 925.598.3099 (w) This e-mail has been captured and archived by the ZANTAZ Digital Safe(tm) service. For more information, visit us at www.zantaz.com. IMPORTANT: This electronic mail message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by telephone or directly reply to the original message(s) sent. Thank you.
Re: TSM 4.1.0 on OS/390 2.9 hang
We migrated our TSM server off of OS390 about 6 months ago. But when we were on OS390 we had that problem and had to go to maintenance level 4.2.1.9 to fix it. A work around seem to be to cycle the TSM server every day. David >>> [EMAIL PROTECTED] 12/04/02 09:41PM >>> Hello All Our TSM server is experiencing intermittant problems (on average every second day) with these characteristics 1. TSM is consuming a lot of CPU resources. 2. There is no TAPE I/O activity occuring when I know there are migrations/reclamations running. 3. I'm unable to logon to TSM using dsmadmc. The login attempt hangs and eventually times out. 4. There is no activity being recorded in the TSM activity log (ie syslog). 5. There is nothing unusual prior to the last entry in the activity log...no errors. Sometimes after and hour or so of TSM doing nothing productive, things come right and everything continues on as normal. Leaving an hour or two's gap in the activity log. On other occasions the TSM server grinds to a halt..Zero CPU activity and Zero tape I/O activity, resulting in us having tp recycle the TSM server. We are running TSM with a region size of 1280MB. I know we are back level in TSM server maintenance and are in the process of migrating to TSM 5.1, but in the meantime has anyone on the list seen something like this or can suggest what I can do to resolve this problem. Thanks Gavin Ring 36-46 George Street Burwood, NSW, 2134 Ph: +61 2 9378-0985 Fax: +61 2 9378-0731
Re: Schedule successfull despite severe error, nothing in act log
One of the very nice features of Servergraph/TSM is that it queries the filespaces daily and sends email notifications when a filespace is not successfully backed up. It does not rely on a schedule event successful message to determine whether the backup did in fact complete. David Ehresman A satisfied customer >>> [EMAIL PROTECTED] 12/05/02 10:39AM >>> Hi everybody, Our config: tsm server aix 4.2.1.15, client W2K 4.2.1.20 we got following message in dsmsched.log of one of our users files server: ANS4038E An error occured processing file system '\\hqvevxxx\f:' Corresponding schedule was SUCCESSFULL!, the message was not reported in the activity log, that mean nobody realized that for 6 days, the 500'000 user files were not any more backed-up. Any comment ? I would say this is a severe bug, what do you think ? Regards, Reni LAMBELET NESTEC SA GLOBE - Global Business Excellence Central Support Center Information Technology Av. Nestli 55 CH-1800 Vevey (Switzerland) til +41 (0)21 924 35 43 fax +41 (0)21 703 30 17 local UBS-Nestec, Bussigny mailto:[EMAIL PROTECTED] This message is intended only for the use of the addressee and may contain information that is privileged and confidential.
Refresh Database
Hi, TSM users: I deleted some files from client or issued deleting commands from server side. How soon will TSM database update itself? How can we configure it by command? Do we have to restart TSM server service to refresh it fastest? Thanks for all information, Tao Jiang www.cobantech.com
Copypool management
Multiple database backups to copypools? How do I complete multiple database backups each day but only copy the most current to offsite_pool for DR?? I did receive one good response to wanted to make sure that there were no alternate ways of accomplishing this task??? Thanks, Roger
Re: migrating from AIX to W2K with 349x lib
>Iam looking for some info about connecting our 349x >library with an W2k TSM SERVER >Currently it communicates with AIX through rs232. >As i see it should be possible either through >rs232/LAN >but how (driver,config,..) I want to make sure you know about the manuals which cover this... (info listed in my http://people.bu.edu/rbs/ADSM.QuickFacts) "IBM TotalStorage Tape Device Drivers: Installation and User's Guide", (GC35-0154) (a renaming of the earlier manual "IBM SCSI Tape Drive, Medium Changer, and Library Device Drivers: Installation and User's Guide", of the same publication number) "IBM TotalStorage Tape Device Drivers: Programming Reference" (GC35-0346) (a renaming of the earlier manual "IBM SCSI Tape Drive, Medium Changer, and Library Device Drivers: Programming Reference" (WB2107)) Available at ftp://ftp.storsys.ibm.com/devdrvr/Doc/ (refer to the .message file in that directory) or ftp://ftp.software.ibm.com/storage/devdrvr/Doc/ as files: IBM_TotalStorage_tape_IUG.ps or IBM_TotalStorage_tape_IUG.pdf IBM_TotalStorage_tape_PROGREF.ps or IBM_TotalStorage_tape_PROGREF.pdf 3494 redbook: "IBM Magstar Tape Products Family: A Practical Guide" (SG24-4632) http://www.redbooks.ibm.com/abstracts/SG244632.html http://www.redbooks.ibm.com/redbooks/SG244632.html http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg244632.pdf Richard Sims, BU
Re: migrating from AIX to W2K with 349x lib
Yes, you should connect the 3494 to the LAN. You will need to install the Atape and atldd device drivers on your W2K machine (just as you did on the AIX box). -- Joshua S. Bassi IBM Certified - AIX 4/5L, SAN, Shark Tivoli Certified Consultant -ADSM/TSM eServer Systems Expert -pSeries HACMP AIX, HACMP, Storage, TSM Consultant Cell (831) 595-3962 [EMAIL PROTECTED] -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of Ms hein daddel Sent: Thursday, December 05, 2002 7:35 AM To: [EMAIL PROTECTED] Subject: migrating from AIX to W2K with 349x lib Hi All, Iam looking for some info about connecting our 349x library with an W2k TSM SERVER Currently it communicates with AIX through rs232. As i see it should be possible either through rs232/LAN but how (driver,config,..) someone an idea ? TIA __ Gesendet von Yahoo! Mail - http://mail.yahoo.de Weihnachts-Einkdufe ohne Stress! http://shopping.yahoo.de
migrating from AIX to W2K with 349x lib
Hi All, Iam looking for some info about connecting our 349x library with an W2k TSM SERVER Currently it communicates with AIX through rs232. As i see it should be possible either through rs232/LAN but how (driver,config,..) someone an idea ? TIA __ Gesendet von Yahoo! Mail - http://mail.yahoo.de Weihnachts-Einkdufe ohne Stress! http://shopping.yahoo.de
Re: TSM 4.1.0 on OS/390 2.9 hang
Wow. Deja-vue. I have been going through similar issues. Just went throught this twice in the last 2 days. Ended up having to cancel the ADSM STC and restart. Once difference is that I am fairly current on maintenance. Running 4.2.2.13 and about to kick in 4.2.3.0, eventhough they have come out with a 4.2.3.1 patch. Hopefully someone has a clue ! "Ring, Gavin M" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 12/04/2002 09:41 PM Please respond to "ADSM: Dist Stor Manager" To: [EMAIL PROTECTED] cc: Subject:TSM 4.1.0 on OS/390 2.9 hang Hello All Our TSM server is experiencing intermittant problems (on average every second day) with these characteristics 1. TSM is consuming a lot of CPU resources. 2. There is no TAPE I/O activity occuring when I know there are migrations/reclamations running. 3. I'm unable to logon to TSM using dsmadmc. The login attempt hangs and eventually times out. 4. There is no activity being recorded in the TSM activity log (ie syslog). 5. There is nothing unusual prior to the last entry in the activity log...no errors. Sometimes after and hour or so of TSM doing nothing productive, things come right and everything continues on as normal. Leaving an hour or two's gap in the activity log. On other occasions the TSM server grinds to a halt..Zero CPU activity and Zero tape I/O activity, resulting in us having tp recycle the TSM server. We are running TSM with a region size of 1280MB. I know we are back level in TSM server maintenance and are in the process of migrating to TSM 5.1, but in the meantime has anyone on the list seen something like this or can suggest what I can do to resolve this problem. Thanks Gavin Ring 36-46 George Street Burwood, NSW, 2134 Ph: +61 2 9378-0985 Fax: +61 2 9378-0731
Schedule successfull despite severe error, nothing in act log
Hi everybody, Our config: tsm server aix 4.2.1.15, client W2K 4.2.1.20 we got following message in dsmsched.log of one of our users files server: ANS4038E An error occured processing file system '\\hqvevxxx\f:' Corresponding schedule was SUCCESSFULL!, the message was not reported in the activity log, that mean nobody realized that for 6 days, the 500'000 user files were not any more backed-up. Any comment ? I would say this is a severe bug, what do you think ? Regards, René LAMBELET NESTEC SA GLOBE - Global Business Excellence Central Support Center Information Technology Av. Nestlé 55 CH-1800 Vevey (Switzerland) tél +41 (0)21 924 35 43 fax +41 (0)21 703 30 17 local UBS-Nestec, Bussigny mailto:[EMAIL PROTECTED] This message is intended only for the use of the addressee and may contain information that is privileged and confidential.
Re: Import node tape mount problem !
Do a "q req" to look for the "request #" then issue a reply to that request. Syntax >>-REPLY--request_number--++--->< '-LABEL--=--volume_label-' Dwight E. Cook Software Application Engineer III Science Applications International Corporation 509 S. Boston Ave. Suite 220 Tulsa, Oklahoma 74103-4606 Office (918) 732-7109 -Original Message- From: chris rees [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 3:19 AM To: [EMAIL PROTECTED] Subject: Import node tape mount problem ! All I'm having a problem with export/import of a node from 1 TSM server to another. Both servers are at 5.1.5.0 and have a scsi attached LTO drive attached. The client filespaces that I have exported are unicode. The export to tape seemed to work successfully going by what was in the actlog. Its on the import that I'm having a problem. I kick off the import process telling it the nodename, giving it a * for unicode filespace name and also entering the volume name the export was done to. The process kicks off and asks for the tape to be mounted. I mount the tape, in the actlog is shows that the label has been verifyed and that the tape is mounted. All fine so far. However the process itself just sits there still saying its waiting for the tape to be mounted. Anyone got any ideas.? Am I doing something wrong somewhere? Regards Chris _ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail
Re: include/exclude syntax question for TSM Unix Client
In the recent postings on Include/Exclude, there isn't mention of the use of the 'dsmc query inclexcl' command. That can be a great aid in illuminating how the Include/Exclude statements "compile" - particularly in conjunction with the out-of-sight client option set Include/Excludes that reside on the server. Take advantage of all the TSM aids available to you, to make life a little easier. Richard Sims, BU
Re: TSM 4.1.0 on OS/390 2.9 hang
Have you got RMF, and if so does that show TSM waiting on any resource? "Ring, Gavin M" <[EMAIL PROTECTED]> on 12/05/2002 02:41:00 AM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc:(bcc: John Naylor/HAV/SSE) Subject: TSM 4.1.0 on OS/390 2.9 hang Hello All Our TSM server is experiencing intermittant problems (on average every second day) with these characteristics 1. TSM is consuming a lot of CPU resources. 2. There is no TAPE I/O activity occuring when I know there are migrations/reclamations running. 3. I'm unable to logon to TSM using dsmadmc. The login attempt hangs and eventually times out. 4. There is no activity being recorded in the TSM activity log (ie syslog). 5. There is nothing unusual prior to the last entry in the activity log...no errors. Sometimes after and hour or so of TSM doing nothing productive, things come right and everything continues on as normal. Leaving an hour or two's gap in the activity log. On other occasions the TSM server grinds to a halt..Zero CPU activity and Zero tape I/O activity, resulting in us having tp recycle the TSM server. We are running TSM with a region size of 1280MB. I know we are back level in TSM server maintenance and are in the process of migrating to TSM 5.1, but in the meantime has anyone on the list seen something like this or can suggest what I can do to resolve this problem. Thanks Gavin Ring 36-46 George Street Burwood, NSW, 2134 Ph: +61 2 9378-0985 Fax: +61 2 9378-0731 ** The information in this E-Mail is confidential and may be legally privileged. It may not represent the views of Scottish and Southern Energy plc. It is intended solely for the addressees. Access to this E-Mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any unauthorised recipient should advise the sender immediately of the error in transmission. Scottish Hydro-Electric, Southern Electric, SWALEC and S+S are trading names of the Scottish and Southern Energy Group. **
Import node tape mount problem !
All I'm having a problem with export/import of a node from 1 TSM server to another. Both servers are at 5.1.5.0 and have a scsi attached LTO drive attached. The client filespaces that I have exported are unicode. The export to tape seemed to work successfully going by what was in the actlog. Its on the import that I'm having a problem. I kick off the import process telling it the nodename, giving it a * for unicode filespace name and also entering the volume name the export was done to. The process kicks off and asks for the tape to be mounted. I mount the tape, in the actlog is shows that the label has been verifyed and that the tape is mounted. All fine so far. However the process itself just sits there still saying its waiting for the tape to be mounted. Anyone got any ideas.? Am I doing something wrong somewhere? Regards Chris _ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail
