Re: full library?

[Skylar Thompson]

Are those 890 slots inclusive of the import/export packs? Back when I
worked with T950s, I remember that their web interface wouldn't make it
clear whether you were looking at storage+import/export or just storage
slots.

On 11/26/2012 5:07 PM, Dan Olson wrote:
> Hi All...
>
> So I've run into a strange problem.  I've got a tsm server attached to a 
> spectra T950 library, with 890 slots in the partition.
> Tsm knows about 870 tapes, verified with select count(*) from libvolumes.
>
> When I go to checkin tapes from the CAP I get the message "ANR8382W Library 1 
> is now full."
>
> I've audited the library and compared the inventory, and tsm's state is 
> consistent with the library.
>
> Any ideas?  Anyone know if that full message originates from TSMs state or a 
> library return?
>
> 
> Daniel Murphy-Olson
> Systems Administrator
> Mathematics & Computer Science Division
> Argonne National Laboratory
>


--
-- Skylar Thompson (skyl...@u.washington.edu)
-- Genome Sciences Department, System Administrator
-- Foege Building S048, (206)-685-7354
-- University of Washington School of Medicine

Re: full library?

[Dan Olson]

Thanks for everything.  We finally figured it out.  TSM must get this
info from the return on the move command.  While there was room in
the library, and elements empty there was no "terapaks" installed
to hold those tapes, basically the carriers for the tapes were missing.


Daniel Murphy-Olson
Systems Administrator
Mathematics & Computer Science Division
Argonne National Laboratory
630-252-0055

- Original Message -
> From: "J. Pohlmann" 
> To: ADSM-L@VM.MARIST.EDU
> Sent: Monday, November 26, 2012 7:19:26 PM
> Subject: Re: [ADSM-L] full library?
> There may be tapes in the library of which TSM has no knowledge. Do a
>
> Checkin libv  search=yes checkl=b status=scr wait=0
>
> That will look for any possible scratch tapes. After this process is
> complete, do a
>
> Checkin libv  search=yes checkl=b status=priv wait=0
>
> which will check in any tapes that TSM knows about but thinks that
> they are not in the library.
>
> Regards,
>
> Joerg Pohlmann
>
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
> Of Dan Olson
> Sent: Monday, November 26, 2012 17:08
> To: ADSM-L@VM.MARIST.EDU
> Subject: [ADSM-L] full library?
>
> Hi All...
>
> So I've run into a strange problem. I've got a tsm server attached to
> a spectra T950 library, with 890 slots in the partition.
> Tsm knows about 870 tapes, verified with select count(*) from
> libvolumes.
>
> When I go to checkin tapes from the CAP I get the message "ANR8382W
> Library 1 is now full."
>
> I've audited the library and compared the inventory, and tsm's state
> is consistent with the library.
>
> Any ideas? Anyone know if that full message originates from TSMs state
> or a library return?
>
> 
> Daniel Murphy-Olson
> Systems Administrator
> Mathematics & Computer Science Division
> Argonne National Laboratory

Re: full library?

[J. Pohlmann]

There may be tapes in the library of which TSM has no knowledge. Do a 

Checkin libv  search=yes checkl=b status=scr wait=0

That will look for any possible scratch tapes. After this process is complete, 
do a 

Checkin libv  search=yes checkl=b status=priv wait=0

which will check in any tapes that TSM knows about but thinks that they are not 
in the library.

Regards,

Joerg Pohlmann

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Dan 
Olson
Sent: Monday, November 26, 2012 17:08
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] full library?

Hi All...

So I've run into a strange problem.  I've got a tsm server attached to a 
spectra T950 library, with 890 slots in the partition.
Tsm knows about 870 tapes, verified with select count(*) from libvolumes.

When I go to checkin tapes from the CAP I get the message "ANR8382W Library 1 
is now full."

I've audited the library and compared the inventory, and tsm's state is 
consistent with the library.

Any ideas?  Anyone know if that full message originates from TSMs state or a 
library return?


Daniel Murphy-Olson
Systems Administrator
Mathematics & Computer Science Division
Argonne National Laboratory

full library?

[Dan Olson]

Hi All...

So I've run into a strange problem.  I've got a tsm server attached to a 
spectra T950 library, with 890 slots in the partition.
Tsm knows about 870 tapes, verified with select count(*) from libvolumes.

When I go to checkin tapes from the CAP I get the message "ANR8382W Library 1 
is now full."

I've audited the library and compared the inventory, and tsm's state is 
consistent with the library.

Any ideas?  Anyone know if that full message originates from TSMs state or a 
library return?


Daniel Murphy-Olson
Systems Administrator
Mathematics & Computer Science Division
Argonne National Laboratory

Re: netezza nzbackup connector for TSM

[Remco Post]

Hi,

you only need to to buy licenses for the agents that IBM provides. Ask your IBM 
sales rep. TSM for DB backups Oracle and SQL server, I don't think it'll do 
much for Netezza...

On 26 nov. 2012, at 23:13, "Tailor, Mahesh C."  
wrote:

> Hello.
> 
> On a similar thread: we are in the process of acquiring Netezza and will need 
> to back it up to TSM.  We were told of the TSM Connector.  In trying to make 
> sure we are in TSM license compliance, we were told that we would need to 
> license both the TSM for BA client and the TSM for DB client.  If we were to 
> license both TSM products, we are looking at cost in the six-figures. Can 
> someone please advise as to how the TSM licensing works for this product?
> 
> Thanks in advance.
> Mahesh
> 
> 
> From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
> [tbr...@cenhud.com]
> Sent: Monday, October 29, 2012 11:34
> To: ADSM-L@VM.MARIST.EDU
> Subject: [ADSM-L] netezza nzbackup connector for TSM
> 
> I am attempting to get the netezza backup utility working with tsm. They have 
> a connector
> that allows backing up netezza backups directly into tsm.
> 
> Has anyone tried this and got it to work.
> 
> ./nzbackup -u user -pw psw -db TDS -connector tivioli  -connectorArgs 
> "TSM_PASSWORD=x"
> 
> 
> Error: unable to connect to host 'localhost', port '5483' - Connection 
> refused.
> 
> 
> Thanks,
> 
> Tim Brown
> Supervisor Computer Operations
> Central Hudson Gas & Electric
> 284 South Ave
> Poughkeepsie, NY 12601
> Email: tbr...@cenhud.com 
> <>
> Phone: 845-486-5643
> Fax: 845-486-5921
> Cell: 845-235-4255
> 
> 
> "This message contains confidential information and is only for the intended 
> recipient. If the reader of this message is not the intended recipient, or an 
> employee or agent responsible for delivering this message to the intended 
> recipient, please notify the sender immediately by replying to this note and 
> deleting all copies and attachments."
> 
> 
> 
> Notice: The information and attachment(s) contained in this communication are 
> intended for the addressee only, and may be confidential and/or legally 
> privileged. If you have received this communication in error, please contact 
> the sender immediately, and delete this communication from any computer or 
> network system. Any interception, review, printing, copying, re-transmission, 
> dissemination, or other use of, or taking of any action upon this information 
> by persons or entities other than the intended recipient is strictly 
> prohibited by law and may subject them to criminal or civil liability. 
> Carilion Clinic shall not be liable for the improper and/or incomplete 
> transmission of the information contained in this communication or for any 
> delay in its receipt.

-- 
Met vriendelijke groeten/Kind Regards,

Remco Post
r.p...@plcs.nl
+31 6 248 21 622

Re: netezza nzbackup connector for TSM

[Tailor, Mahesh C.]

Hello.

On a similar thread: we are in the process of acquiring Netezza and will need 
to back it up to TSM.  We were told of the TSM Connector.  In trying to make 
sure we are in TSM license compliance, we were told that we would need to 
license both the TSM for BA client and the TSM for DB client.  If we were to 
license both TSM products, we are looking at cost in the six-figures. Can 
someone please advise as to how the TSM licensing works for this product?

Thanks in advance.
Mahesh


From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
[tbr...@cenhud.com]
Sent: Monday, October 29, 2012 11:34
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] netezza nzbackup connector for TSM

I am attempting to get the netezza backup utility working with tsm. They have a 
connector
that allows backing up netezza backups directly into tsm.

Has anyone tried this and got it to work.

./nzbackup -u user -pw psw -db TDS -connector tivioli  -connectorArgs 
"TSM_PASSWORD=x"


Error: unable to connect to host 'localhost', port '5483' - Connection refused.


Thanks,

Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.com <>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


"This message contains confidential information and is only for the intended 
recipient. If the reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to the intended 
recipient, please notify the sender immediately by replying to this note and 
deleting all copies and attachments."



Notice: The information and attachment(s) contained in this communication are 
intended for the addressee only, and may be confidential and/or legally 
privileged. If you have received this communication in error, please contact 
the sender immediately, and delete this communication from any computer or 
network system. Any interception, review, printing, copying, re-transmission, 
dissemination, or other use of, or taking of any action upon this information 
by persons or entities other than the intended recipient is strictly prohibited 
by law and may subject them to criminal or civil liability. Carilion Clinic 
shall not be liable for the improper and/or incomplete transmission of the 
information contained in this communication or for any delay in its receipt.

Re: rename nodes fi for systemstate

[Tim Brown]

Worked !!

Thanks,
 
Tim 

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of David 
Rigaudiere
Sent: Monday, 26 November, 2012 2:37 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: rename nodes fi for systemstate

Hello.  
Try

RENAME FILENameType=FSID



Le 26 nov. 2012 à 19:14, Tim Brown  a écrit :

> I can rename a servers systemstate FI but cant rename it back. Is this 
> inherent or an error with the rename command. I know that it can be recreated 
> but just curious why the second rename fails.
> 
> Works:
> 
> rename FILESPACE servera "servera\SystemState\NULL\System 
> State\SystemState" "serveraDR\SystemState\NULL\Sytem 
> State\SystemState" namet=UNI NEWNAMET=UNI
> 
> Fails:
> 
> rename FILESPACE servera "serveraDR\SystemState\NULL\System 
> State\SystemState" "servera\SystemState\NULL\Sytem State\SystemState" 
> namet=UNI NEWNAMET=UNI
> 
> ANR0852E RENAME FILESPACE: No matching file spaces found for node 
> SERVERA
> 
> 
> Thanks,
> 
> Tim Brown
> Supervisor Computer Operations
> Central Hudson Gas & Electric
> 284 South Ave
> Poughkeepsie, NY 12601
> Email: tbr...@cenhud.com 
> <>
> Phone: 845-486-5643
> Fax: 845-486-5921
> Cell: 845-235-4255
> 
> 
> "This message contains confidential information and is only for the intended 
> recipient. If the reader of this message is not the intended recipient, or an 
> employee or agent responsible for delivering this message to the intended 
> recipient, please notify the sender immediately by replying to this note and 
> deleting all copies and attachments."

Re: rename nodes fi for systemstate

[David Rigaudiere]

Hello.  
Try

RENAME FILENameType=FSID



Le 26 nov. 2012 à 19:14, Tim Brown  a écrit :

> I can rename a servers systemstate FI but cant rename it back. Is this 
> inherent or an error with the rename command. I know that it can be
> recreated but just curious why the second rename fails.
> 
> Works:
> 
> rename FILESPACE servera "servera\SystemState\NULL\System State\SystemState" 
> "serveraDR\SystemState\NULL\Sytem State\SystemState" namet=UNI NEWNAMET=UNI
> 
> Fails:
> 
> rename FILESPACE servera "serveraDR\SystemState\NULL\System 
> State\SystemState" "servera\SystemState\NULL\Sytem State\SystemState" 
> namet=UNI NEWNAMET=UNI
> 
> ANR0852E RENAME FILESPACE: No matching file spaces found for node SERVERA
> 
> 
> Thanks,
> 
> Tim Brown
> Supervisor Computer Operations
> Central Hudson Gas & Electric
> 284 South Ave
> Poughkeepsie, NY 12601
> Email: tbr...@cenhud.com 
> <>
> Phone: 845-486-5643
> Fax: 845-486-5921
> Cell: 845-235-4255
> 
> 
> "This message contains confidential information and is only for the intended 
> recipient. If the reader of this message is not the intended recipient, or an 
> employee or agent responsible for delivering this message to the intended 
> recipient, please notify the sender immediately by replying to this note and 
> deleting all copies and attachments."

Re: rename nodes fi for systemstate

[Tim Brown]

The email had the spelling wrong , my command had it as "System State"

Thanks,
 
Tim 
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Bob 
Levad
Sent: Monday, 26 November, 2012 1:35 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: rename nodes fi for systemstate

Check your spelling "Sytem State"

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tim 
Brown
Sent: Monday, November 26, 2012 12:14 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] rename nodes fi for systemstate

I can rename a servers systemstate FI but cant rename it back. Is this inherent 
or an error with the rename command. I know that it can be recreated but just 
curious why the second rename fails.

Works:

rename FILESPACE servera "servera\SystemState\NULL\System State\SystemState" 
"serveraDR\SystemState\NULL\Sytem State\SystemState" namet=UNI NEWNAMET=UNI

Fails:

rename FILESPACE servera "serveraDR\SystemState\NULL\System State\SystemState" 
"servera\SystemState\NULL\Sytem State\SystemState" namet=UNI NEWNAMET=UNI

ANR0852E RENAME FILESPACE: No matching file spaces found for node SERVERA


Thanks,

Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.com <>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


"This message contains confidential information and is only for the intended 
recipient. If the reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to the intended 
recipient, please notify the sender immediately by replying to this note and 
deleting all copies and attachments."
This electronic transmission and any documents accompanying this electronic 
transmission contain confidential information belonging to the sender. This 
information may be legally privileged. The information is intended only for the 
use of the individual or entity named above. If you are not the intended 
recipient, you are hereby notified that any disclosure, copying, distribution, 
or the taking of any action in reliance on or regarding the contents of this 
electronically transmitted information is strictly prohibited.

Re: rename nodes fi for systemstate

[Bob Levad]

Check your spelling "Sytem State"

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tim 
Brown
Sent: Monday, November 26, 2012 12:14 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] rename nodes fi for systemstate

I can rename a servers systemstate FI but cant rename it back. Is this inherent 
or an error with the rename command. I know that it can be
recreated but just curious why the second rename fails.

Works:

rename FILESPACE servera "servera\SystemState\NULL\System State\SystemState" 
"serveraDR\SystemState\NULL\Sytem State\SystemState" namet=UNI NEWNAMET=UNI

Fails:

rename FILESPACE servera "serveraDR\SystemState\NULL\System State\SystemState" 
"servera\SystemState\NULL\Sytem State\SystemState" namet=UNI NEWNAMET=UNI

ANR0852E RENAME FILESPACE: No matching file spaces found for node SERVERA


Thanks,

Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.com <>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


"This message contains confidential information and is only for the intended 
recipient. If the reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to the intended 
recipient, please notify the sender immediately by replying to this note and 
deleting all copies and attachments."
This electronic transmission and any documents accompanying this electronic 
transmission contain confidential information belonging to the sender. This 
information may be legally privileged. The information is intended only for the 
use of the individual or entity named above. If you are not the intended 
recipient, you are hereby notified that any disclosure, copying, distribution, 
or the taking of any action in reliance on or regarding the contents of this 
electronically transmitted information is strictly prohibited.

rename nodes fi for systemstate

[Tim Brown]

I can rename a servers systemstate FI but cant rename it back. Is this inherent 
or an error with the rename command. I know that it can be
recreated but just curious why the second rename fails.

Works:

rename FILESPACE servera "servera\SystemState\NULL\System State\SystemState" 
"serveraDR\SystemState\NULL\Sytem State\SystemState" namet=UNI NEWNAMET=UNI

Fails:

rename FILESPACE servera "serveraDR\SystemState\NULL\System State\SystemState" 
"servera\SystemState\NULL\Sytem State\SystemState" namet=UNI NEWNAMET=UNI

ANR0852E RENAME FILESPACE: No matching file spaces found for node SERVERA


Thanks,

Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.com <>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


"This message contains confidential information and is only for the intended 
recipient. If the reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to the intended 
recipient, please notify the sender immediately by replying to this note and 
deleting all copies and attachments."