AW: [ADSM-L] update node command fails

[Rainer Holzinger@legami IT]

Hi Uwe,

thank you for clarification.

Best regards,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager  Im Auftrag von Uwe
Schreiber
Gesendet: Mittwoch, 1. Dezember 2021 12:07
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] update node command fails

HI Rainer,

In ISP versions earlier than 8.1.2, the value for the parameter SSLREQUIRED
with the "update noded" command could only get changed with "System Level
Authority", although other changes could be made with "Unrestricted Policy
Priviledge". (This is still documented within the latest documentation)

Since the SSLREQUIRED parameter became the status "depricated" since version
8.1.2, because the SESSIONSECURITY parameter is now used.

To modify the value for the SESSIONSECURITY parameter (analogous to the
previous SSLREQUIRED), the "System Authority" is required.
(This is missing within the latest documentation)

Regards, Uwe


-Original Message-
From: ADSM: Dist Stor Manager  On Behalf Of Rainer
Holzinger@legami IT
Sent: Mittwoch, 1. Dezember 2021 10:22
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] update node command fails

Hi all,

 

does anybody know why an

 

‘UPDate NOde node_name SESSIONSECurity=TRANSitional’

 

is ending up with error message

 

ANR2035E UPDATE NODE: Administrator admin_name is not
authorized to issue this command.

 

even though the admin is having unrestricted policy privileges?

 

TIA,

Rainer

 

 

legami IT-Consulting GmbH

Dr.-Bock-Str. 24b

D-93142 Maxhütte-Haidhof

Email:rainer.holzin...@legami-it.de

Mobil:  +49 162 2807 888 

update node command fails

[Rainer Holzinger@legami IT]

Hi all,

 

does anybody know why an

 

‘UPDate NOde node_name SESSIONSECurity=TRANSitional’

 

is ending up with error message

 

ANR2035E UPDATE NODE: Administrator admin_name is not
authorized to issue this command.

 

even though the admin is having unrestricted policy privileges?

 

TIA,

Rainer

 

 

legami IT-Consulting GmbH

Dr.-Bock-Str. 24b

D-93142 Maxhütte-Haidhof

Email:rainer.holzin...@legami-it.de

Mobil:  +49 162 2807 888 

Antwort: Re: [ADSM-L] Antwort: Re: [ADSM-L] syslog

[Rainer Holzinger]

Hi Remco,

you're right, the severity inside TSM is not applied to the severity 
within SYSLOG.
If IBM would do so I would have one problem less to tackle with ;-)
Maybe time for an RFE ;-)

best regards,
Rainer



Von:"Remco Post" <r.p...@plcs.nl>
An: ADSM-L@VM.MARIST.EDU
Datum:  20.09.2017 20:40
Betreff:Re: [ADSM-L] Antwort: Re: [ADSM-L] syslog
Gesendet von:   "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU>



> On 20 Sep 2017, at 09:23, Rainer Holzinger 
<rainer.holzin...@empalis.com> wrote:
> 
> Hi Remco,
> 
> I can confirm IBM's information.
> SYSLOG records are coming in via syslog facility 'user' and severity 
> 'info’.

Hi Rainer,

I’m now guessing all are of sev. info, not reflecting the severity within 
TSM… well, I guess there must always be something left to improve upon ;-)

Thanks.

> 

> Best regards,
> Rainer
> 
> 
> 
> Von:"Remco Post" <remco.p...@gmail.com>
> An: ADSM-L@VM.MARIST.EDU
> Datum:  19.09.2017 22:47
> Betreff:Re: [ADSM-L] syslog
> Gesendet von:   "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU>
> 
> 
> 
> Hi all,
> 
> for those of us who are interested, I haven’t been able to confirm, but 
> IBM support told me the syslog facility is ’USER’, for better/easier 
> filtering.
> 
>> On 24 Aug 2017, at 17:35, Shawn Drew <shaw...@gmail.com> wrote:
>> 
>> Right, when trying to figure this out I tried all the local facilities 
> but couldn't find the TSM messages. I gave up on the facilities when I 
> found the rsync syntax.
>> 
>> On Aug 24, 2017, 3:48 AM -0400, Remco Post <r.p...@plcs.nl>, wrote:
>>> Hi Shawn,
>>> 
>>> great! thanks! This is really useful. I guess only IBM knows what 
> syslog facility is being used…
>>> 
>>> 
>>>> On 24 Aug 2017, at 02:29, Shawn Drew <shaw...@gmail.com> wrote:
>>>> 
>>>> I think this syntax is specific to rsyslog (which you probably have)
>>>> When you put it in the conf, make sure it is above the line for the
>>>> messages file
>>>> 
>>>> if $programname == 'dsmserv' and not ($msg contains 
'REPORTING_ADMIN')
>>>> and not ($msg contains 'ANR8592I') then /var/log/dsmserv.log
>>>> & @splunkserver.intranet
>>>> & ~
>>>> 
>>>> That is 3 lines, in case it wraps.
>>>> Line 1) I am filtering out messages that are created by a specific
>>>> data-collector service account (connects every 5 minutes) and a 
> specific
>>>> informational message. Make sure and setup logrotation for this log
>>>> Line 2) Duplicate the log msg previously described and also send it 
to
>>>> "splunkserver.intranet"
>>>> Line 3) Any log already filtered, do not include in any further 
> logging.
>>>> This prevents TSM logs from also showing up in the messages file but
>>>> needs to be before the messages line in the conf for this to work.
>>>> 
>>>> 
>>>> This sends the message using the standard syslog protocol to
>>>> "splunkserver.intranet". That server receives the message using the 
> its
>>>> own standard rsyslog installation (needs to be configured to receive
>>>> syslog) Then splunk will monitor the messages file and load it into 
> the
>>>> index. You can then use splunk filters if you want to move it to a
>>>> separate index or whatever. I have all the TSM/DataDomain stuff going
>>>> into an isolated index. I think splunk can be configured to receive
>>>> syslog messages directly but we don't do it that way (I don't run the
>>>> splunk server)
>>>> 
>>>> 
>>>> 
>>>> On 8/23/2017 3:56 PM, Remco Post wrote:
>>>>> Tell me more, please. I'm quite sure that there is Splunk in my 
> future as well, can you share your syslog config?
>>>>> 
>>> 
>>> --
>>> 
>>> Met vriendelijke groeten/Kind Regards,
>>> 
>>> Remco Post
>>> r.p...@plcs.nl
>>> +31 6 248 21 622
> 
> 
> 
> --
> 
> Met vriendelijke groeten/Kind Regards,
> 
> Remco Post
> r.p...@plcs.nl
> +31 6 248 21 622
> 
> 
> 
> 

-- 

 Met vriendelijke groeten/Kind Regards,

Remco Post
r.p...@plcs.nl
+31 6 248 21 622

Antwort: Re: [ADSM-L] syslog

[Rainer Holzinger]

Hi Remco,

I can confirm IBM's information.
SYSLOG records are coming in via syslog facility 'user' and severity 
'info'.

Best regards,
Rainer



Von:"Remco Post" 
An: ADSM-L@VM.MARIST.EDU
Datum:  19.09.2017 22:47
Betreff:Re: [ADSM-L] syslog
Gesendet von:   "ADSM: Dist Stor Manager" 



Hi all,

for those of us who are interested, I haven’t been able to confirm, but 
IBM support told me the syslog facility is ’USER’, for better/easier 
filtering.

> On 24 Aug 2017, at 17:35, Shawn Drew  wrote:
> 
> Right, when trying to figure this out I tried all the local facilities 
but couldn't find the TSM messages. I gave up on the facilities when I 
found the rsync syntax.
> 
> On Aug 24, 2017, 3:48 AM -0400, Remco Post , wrote:
>> Hi Shawn,
>> 
>> great! thanks! This is really useful. I guess only IBM knows what 
syslog facility is being used…
>> 
>> 
>>> On 24 Aug 2017, at 02:29, Shawn Drew  wrote:
>>> 
>>> I think this syntax is specific to rsyslog (which you probably have)
>>> When you put it in the conf, make sure it is above the line for the
>>> messages file
>>> 
>>> if $programname == 'dsmserv' and not ($msg contains 'REPORTING_ADMIN')
>>> and not ($msg contains 'ANR8592I') then /var/log/dsmserv.log
>>> & @splunkserver.intranet
>>> & ~
>>> 
>>> That is 3 lines, in case it wraps.
>>> Line 1) I am filtering out messages that are created by a specific
>>> data-collector service account (connects every 5 minutes) and a 
specific
>>> informational message. Make sure and setup logrotation for this log
>>> Line 2) Duplicate the log msg previously described and also send it to
>>> "splunkserver.intranet"
>>> Line 3) Any log already filtered, do not include in any further 
logging.
>>> This prevents TSM logs from also showing up in the messages file but
>>> needs to be before the messages line in the conf for this to work.
>>> 
>>> 
>>> This sends the message using the standard syslog protocol to
>>> "splunkserver.intranet". That server receives the message using the 
its
>>> own standard rsyslog installation (needs to be configured to receive
>>> syslog) Then splunk will monitor the messages file and load it into 
the
>>> index. You can then use splunk filters if you want to move it to a
>>> separate index or whatever. I have all the TSM/DataDomain stuff going
>>> into an isolated index. I think splunk can be configured to receive
>>> syslog messages directly but we don't do it that way (I don't run the
>>> splunk server)
>>> 
>>> 
>>> 
>>> On 8/23/2017 3:56 PM, Remco Post wrote:
 Tell me more, please. I'm quite sure that there is Splunk in my 
future as well, can you share your syslog config?
 
>> 
>> --
>> 
>> Met vriendelijke groeten/Kind Regards,
>> 
>> Remco Post
>> r.p...@plcs.nl
>> +31 6 248 21 622



--

Met vriendelijke groeten/Kind Regards,

Remco Post
r.p...@plcs.nl
+31 6 248 21 622

Antwort: [ADSM-L] problem after 7.1.5 upgrade: ANS1708E ... Only root can do this operation

[Rainer Holzinger]

Hi Richard,

option 'backupinitiation   off' in dsmserv.opt and recycle of the instance
die help at my site
some months ago.

HTH,
Rainer



Von:"Rhodes, Richard L." 
An: ADSM-L@VM.MARIST.EDU
Datum:  07.12.2016 15:47
Betreff:[ADSM-L] problem after 7.1.5 upgrade:  ANS1708E ... Only
root can do this operation
Gesendet von:   "ADSM: Dist Stor Manager" 



Just upgrade a TSM server from 6.3.5 to 7.1.5 on AIX.

This morning our Oracle DBA's are reporting this error:
ANS1708E Backup operation failed.  Only a root user can do this operation<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>

And on the TSM server we see:
ANR1890W Backup operation for session 8549 node  failed due to
root-only restriction<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>

The Oracle DBA's run Oracle backups to disk, then call dsmc to push the
backup to TSM.  They do this AS THE ORACLE USER, not root.

I found a IBM doc that said to set the node parm "Users allowed to back <
http://www-01.ibm.com/support/docview.wss?uid=swg21651108> up" from root
to ALL.  I checked, and all the nodes that had this problem _ARE_ set to
ALL.
  doc:  http://www-01.ibm.com/support/docview.wss?uid=swg21651108

Any thougts are welcome!



cat z.ksh
for i in  
do
./run_cmd.ksh -l tsm1 "q node $i f=d" | grep -i "Users allowed to back
up"
done

./z.ksh
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>
Users allowed to back up: All<
http://www-01.ibm.com/support/docview.wss?uid=swg21651108>




-

The information contained in this message is intended only for the
personal and confidential use of the recipient(s) named above. If the
reader of this message is not the intended recipient or an agent
responsible for delivering it to the intended recipient, you are hereby
notified that you have received this document in error and that any
review, dissemination, distribution, or copying of this message is
strictly prohibited. If you have received this communication in error,
please notify us immediately, and delete the original message.

Antwort: [ADSM-L] Windows exclude.archive help

[Rainer Holzinger]

Hi,

did you add the '-subdir=yes' option at the archive command?

regards,
Rainer



Von:Bob Booth 
An: ADSM-L@VM.MARIST.EDU
Datum:  14.01.2016 19:59
Betreff:[ADSM-L] Windows exclude.archive help
Gesendet von:   "ADSM: Dist Stor Manager" 



Hello all!

I'm trying to help a remote admin that is trying to exclude/include things
in windows filesystem for a scheduled monthly archive.

I will admit that I am not very familiar at all with how windows excludes
work, so I have not been much help, so I am asking the gurus!

He has a windows filesystem:  \\ed-files\v$\webs  and he only wants to
archive certain files.  Here is the relevant part of the opt file:

EXCLUDE.ARCHIVE "*.*"
EXCLUDE.ARCHIVE "\\ed-files\v$\webs\...\*"
INCLUDE.ARCHIVE "\\ed-files\v$\webs\cdl\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\ceep\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\clas\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\dell-d\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\ecap\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\ecrp\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\eic\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\facts\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\idec\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\iecam\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\iecamintranet\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\iel\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\illinoisparents\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\illinoispip\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\intranet\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\i-parents\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\npen\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\readyweb\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\resnet\html\...\*" 2YRLOCAL
INCLUDE.ARCHIVE "\\ed-files\v$\webs\sharingavision\html\...\*" 2YRLOCAL

query inclexcl where 'webs' shows up is below:

Include Archive   \\ed-files\webs\sharingavision\html\...\* dsm.opt
Include Archive   \\ed-files\webs\resnet\html\...\* dsm.opt
Include Archive   \\ed-files\webs\readyweb\html\...\* dsm.opt
Include Archive   \\ed-files\webs\npen\html\...\* dsm.opt
Include Archive   \\ed-files\webs\i-parents\html\...\* dsm.opt
Include Archive   \\ed-files\webs\intranet\html\...\* dsm.opt
Include Archive   \\ed-files\webs\illinoispip\html\...\* dsm.opt
Include Archive   \\ed-files\webs\illinoisparents\html\...\* dsm.opt
Include Archive   \\ed-files\webs\iel\html\...\* dsm.opt
Include Archive   \\ed-files\webs\iecamintranet\html\...\* dsm.opt
Include Archive   \\ed-files\webs\iecam\html\...\* dsm.opt
Include Archive   \\ed-files\webs\idec\html\...\* dsm.opt
Include Archive   \\ed-files\webs\facts\html\...\* dsm.opt
Include Archive   \\ed-files\webs\eic\html\...\* dsm.opt
Include Archive   \\ed-files\webs\ecrp\html\...\* dsm.opt
Include Archive   \\ed-files\webs\ecap\html\...\* dsm.opt
Include Archive   \\ed-files\webs\dell-d\html\...\* dsm.opt
Include Archive   \\ed-files\webs\clas\html\...\* dsm.opt
Include Archive   \\ed-files\webs\ceep\html\...\* dsm.opt
Include Archive   \\ed-files\webs\cdl\html\...\* dsm.opt

When the archive gets run by the scheduler, the only thing that gets
archived
is the directory \\ed-files\v$\webs and no files.

So, what is the best way to accomplish this.

Thanks as always!

Antwort: Re: [ADSM-L] Antwort: [ADSM-L] Windows exclude.archive help

[Rainer Holzinger]

Hi Bob,

give that a try:

Object:   \\ed-files\v$\webs\

regards,
Rainer



Von:Bob Booth <bo...@illinois.edu>
An: ADSM-L@VM.MARIST.EDU
Datum:  14.01.2016 20:28
Betreff:Re: [ADSM-L] Antwort: [ADSM-L] Windows exclude.archive
help
Gesendet von:   "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU>



On Thu, Jan 14, 2016 at 08:19:15PM +0100, Rainer Holzinger wrote:
> Hi,
>
> did you add the '-subdir=yes' option at the archive command?

Yes, sorry, I forgot to include the schedule options:

Action: Archive
Subaction:
Options: -subdir=yes
Objects: \\ed-files\v$\webs

>
> regards,
> Rainer
>
>
>
> Von:Bob Booth <bo...@illinois.edu>
> An: ADSM-L@VM.MARIST.EDU
> Datum:  14.01.2016 19:59
> Betreff:[ADSM-L] Windows exclude.archive help
> Gesendet von:   "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU>
>
>
>
> Hello all!
>
> I'm trying to help a remote admin that is trying to exclude/include
things
> in windows filesystem for a scheduled monthly archive.
>
> I will admit that I am not very familiar at all with how windows
excludes
> work, so I have not been much help, so I am asking the gurus!
>
> He has a windows filesystem:  \\ed-files\v$\webs  and he only wants to
> archive certain files.  Here is the relevant part of the opt file:
>
> EXCLUDE.ARCHIVE "*.*"
> EXCLUDE.ARCHIVE "\\ed-files\v$\webs\...\*"
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\cdl\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\ceep\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\clas\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\dell-d\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\ecap\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\ecrp\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\eic\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\facts\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\idec\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\iecam\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\iecamintranet\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\iel\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\illinoisparents\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\illinoispip\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\intranet\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\i-parents\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\npen\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\readyweb\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\resnet\html\...\*" 2YRLOCAL
> INCLUDE.ARCHIVE "\\ed-files\v$\webs\sharingavision\html\...\*" 2YRLOCAL
>
> query inclexcl where 'webs' shows up is below:
>
> Include Archive   \\ed-files\webs\sharingavision\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\resnet\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\readyweb\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\npen\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\i-parents\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\intranet\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\illinoispip\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\illinoisparents\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\iel\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\iecamintranet\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\iecam\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\idec\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\facts\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\eic\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\ecrp\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\ecap\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\dell-d\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\clas\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\ceep\html\...\* dsm.opt
> Include Archive   \\ed-files\webs\cdl\html\...\* dsm.opt
>
> When the archive gets run by the scheduler, the only thing that gets
> archived
> is the directory \\ed-files\v$\webs and no files.
>
> So, what is the best way to accomplish this.
>
> Thanks as always!

Antwort: [ADSM-L] ACSLS Timeout

[Rainer Holzinger]

Hi Jason,

you could check for TSM Server option ACSTIMEOUTX.
Maybe this will help you out.

best regards,
Rainer




Von:Barkes, Jason jason.bar...@sse.com
An: ADSM-L@VM.MARIST.EDU
Datum:  29.01.2015 11:09
Betreff:[ADSM-L] ACSLS Timeout
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Hi,
I have an ACSLS setup with a client and a library manager and get
mount failures, but the tape actually mounts. If you look at the activity
log for the volume below you can see this.  It seems like it is not
waiting long enough for an acknowledgement back to the Library manager. Is
there a specific ACSLS attribute where I can increase a timeout of
requests to the library, or am I missing something else?

tsm001 -- ./drivecheck.sh MR0140 1
IBM Tivoli Storage Manager
Command Line Administrative Interface - Version 6, Release 4, Level 0.0
(c) Copyright by IBM Corporation and other(s) 1990, 2012. All Rights
Reserved.

Session established with server  TSM001: AIX
  Server Version 6, Release 3, Level 5.0
  Server date/time: 28/01/15   16:21:20  Last access: 28/01/15   16:16:49

ANS8000I Server command: 'q act begint=now-1 se=MR0140'

Date/TimeMessage

--
28/01/15   15:59:21  ANR1182I Removable volume MR0140 is required for
a restore
  request from session 1544291. (SESSION: 1544291)
28/01/15   16:03:07  ANR1401W Mount request denied for volume MR0140 -
mount
  failed. (SESSION: 1544291)
28/01/15   16:04:07  ANR8337I LTO volume MR0140 mounted in drive
  TSM_SL8500_DRIVE19 (/dev/mt18). (SESSION:
1544291)
28/01/15   16:04:11  ANR0510I Session 1544291 opened input volume
MR0140.
  (SESSION: 1544291)
28/01/15   16:04:32  ANR0514I Session 1544291 closed volume MR0140.
(SESSION:
  1544291)
28/01/15   16:09:51  ANR8468I LTO volume MR0140 dismounted from drive
  TSM_SL8500_DRIVE19 (/dev/mt18) in library
TSM_SL8500_6.
  (SESSION: 1544291)
28/01/15   16:21:20  ANR2017I Administrator JB18406 issued command:
QUERY
  ACTLOG begint=now-1 se=MR0140  (SESSION:
1544574)

IBM Tivoli Storage Manager
Command Line Administrative Interface - Version 6, Release 4, Level 0.0
(c) Copyright by IBM Corporation and other(s) 1990, 2012. All Rights
Reserved.

Session established with server TSM001_LIBM: AIX
  Server Version 6, Release 3, Level 5.0
  Server date/time: 28/01/15   16:21:21  Last access: 28/01/15   15:55:42

ANS8000I Server command: 'q act begint=now-1 se=MR0140'

Date/TimeMessage

--
28/01/15   16:03:07  ANR9790W Request to mount volume MR0140 for
library client
  TSM001 failed. (SESSION: 88684) --
MOUNT FAILED
28/01/15   16:03:55  ANR8337I LTO volume MR0140 mounted in drive
  --MOUNT OK
  TSM_SL8500_DRIVE19 (/dev/mt18). (SESSION: 88685)
28/01/15   16:09:32  ANR8325I Dismounting volume MR0140 - 5 minute
mount
  retention expired.
28/01/15   16:10:49  ANR8468I LTO volume MR0140 dismounted from drive
  TSM_SL8500_DRIVE19 (/dev/mt18) in library
TSM_SL8500_6.
  (SESSION: 88685)


Many Thanks, Jason

**
The information in this E-Mail is confidential and may be legally
privileged. It may not represent the views of the SSE Group.
It is intended solely for the addressees. Access to this E-Mail by anyone
else is unauthorised.
If you are not the intended recipient, any disclosure, copying,
distribution or any action taken or omitted to be taken in reliance on it,
is prohibited and may be unlawful.
Any unauthorised recipient should advise the sender immediately of the
error in transmission. Unless specifically stated otherwise, this email
(or any attachments to it) is not an offer capable of acceptance or
acceptance of an offer and it does not form part of a binding contractual
agreement.

SSE plc
Registered Office: Inveralmond House 200 Dunkeld Road Perth PH1 3AQ
Registered in Scotland No. SC117119
Authorised and regulated by the Financial Conduct Authority for certain
consumer credit activities.
www.sse.com

**

Antwort: [ADSM-L] Tivoli Storage Manager Client Management Services feature

[Rainer Holzinger]

Hi Robert,

as far as I know, you will only see errors and only those occurred within 
the last 24 hours.

Best regards,
Rainer




Von:Robert Ouzen rou...@univ.haifa.ac.il
An: ADSM-L@VM.MARIST.EDU
Datum:  17.10.2014 17:42
Betreff:[ADSM-L] Tivoli Storage Manager Client Management Services 
 feature
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Hello

I today installed on one of my client the 
“7.1.1.000-TIV-TSMCMS-Windows64.exe” , when the installation finished I 
saw in the services the new service name:

« Tivoli Storage Manager Client Management Services »  in status Started 
an Automatic.

When from my Operations Center version 7.1.1.0 I load  Diagnosis  under 
the section Clients I got always:

“There are no recommendations available. For more information, see the 
Tivoli Storage Manager Documentation.”

On the below part of the window, client Logs show nothing.

Don’t quite understand the purpose , I think I missed something . I though 
with this utility I can review logs without logging to the system as with 
TSMmanager.

Anybody test it and advise …

Best Regards

Robert Ouzen

Antwort: [ADSM-L] New management class

[Rainer Holzinger]

Hi David,

you should see that after the next backup operation from he TSM client
statistics in dsmsched.log.

See line 'Total number of objects rebound: '

Best regards,
Rainer



Von:Ehresman,David E. deehr...@louisville.edu
An: ADSM-L@VM.MARIST.EDU
Datum:  03.07.2014 15:05
Betreff:[ADSM-L] New management class
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



If I move a node to a new management class (e.g. include * 15day), is
there a message in either the server actlog or the client dsmched.log that
indicates that backup entries have been rebound to the new class?  I
looking for some indication that the change to the new management class
was effective.

David

Antwort: Re: [ADSM-L] TDP for R3 V6.3.0.5

[Rainer Holzinger]

Hi Frank,

thanks for providing the link. It's very useful

Best regards,
Rainer




Von:Frank Fegert fra.nospam...@gmx.de
An: ADSM-L@VM.MARIST.EDU
Datum:  20.04.2014 15:46
Betreff:Re: [ADSM-L] TDP for R3 V6.3.0.5
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Hello,

On Sat, Apr 19, 2014 at 06:56:16PM +0200, Rainer Holzinger wrote:
 is somebody aware what has been fixed in TDP for R3 version 6.3.0.5?
 There's no fixlist avalable on nthe FTP download site.

http://www-01.ibm.com/support/docview.wss?uid=swg21511916

HTH  best regards,

Frank

Antwort: Re: [ADSM-L] TDP for R3 V6.3.0.5

[Rainer Holzinger]

Hello fmolero,

thanks for providing the link. It's very useful

Best regards,
Rainer



Von:fmol...@yahoo.com fmol...@yahoo.com
An: ADSM-L@VM.MARIST.EDU
Datum:  20.04.2014 19:07
Betreff:Re: [ADSM-L] TDP for R3 V6.3.0.5
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Hi you can find the details here:
http://www-01.ibm.com/support/docview.wss?uid=swg21511916

Enviado desde Yahoo Mail con Android

TDP for R3 V6.3.0.5

[Rainer Holzinger]

Hi all,

is somebody aware what has been fixed in TDP for R3 version 6.3.0.5?
There's no fixlist avalable on nthe FTP download site.

Tanks and best regards,
Rainer

Antwort: [ADSM-L] What is the name of the V7 Linux installation package?

[Rainer Holzinger]

Hi Zoltan,

to your second point:

On Windows:
C:\ProgramData\IBM\Installation Manager\installed.xml

On Unix:
/var/ibm/InstallationManager/installed.xml

Hope this helps.
Best regards,
Rainer




Von:Zoltan Forray zfor...@vcu.edu
An: ADSM-L@VM.MARIST.EDU
Datum:  13.03.2014 20:34
Betreff:[ADSM-L] What is the name of the V7 Linux installation
package?
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



[rant on]
First off, I want to say how much I hate the new V7 installation package
process.  It seems IBM is expecting everyone to use a GUI interface and
the
console version has become even more cumbersome.  We don't all have
console/GUI access and getting into GUI mode and root via sudo requires a
multi-step process and is a pain.
[rant off]

Second, I used to be able to ps -ef | grep TIV to find the TSM server
package names and versions.  This no longer work.  So, now what is it
called?

--
*Zoltan Forray*
TSM Software  Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you reply with your password, social
security number or confidential personal information. For more details
visit http://infosecurity.vcu.edu/phishing.html

Antwort: Re: [ADSM-L] Re: Oracle rman - specify management class

[Rainer Holzinger]

Hi there,

this is what I did implement at customer sites:
Include-Exclude Options File inclexcl.ora_sid.opt used by TDP for Oracle 
Unix
Example of a TSM include/exclude file
*==*
* TDPO Client Include/Exclude File - testdb - *
*==*

Exclude *

include.file/TDPO-testdb/.../*.rdb  mc-oracle-db
include.file/TDPO-testdb/.../*.rctl mc-oracle-log
include.file/TDPO-testdb/.../*.rarc mc-oracle-log

The suffix of the different type of RMAN objects coming along have been 
given to me by the
Oracle admins. They are having a possibility inside of RMAN to use some 
kind of 'format'
parameter to 'construct' teh object (piece) names.

Hope this helps.
Regards,
Rainer



Von:David Bronder david-bron...@uiowa.edu
An: ADSM-L@VM.MARIST.EDU
Datum:  04.02.2014 17:14
Betreff:Re: [ADSM-L] Re: Oracle rman - specify management class
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



I believe you can also configure RMAN to format the object names 
differently
for different backup types.  If so, you could tailor include statements to
direct the different types to different management classes and still just 
use
one tdpo.opt and dsm.opt.

=Dave

On 02/04/2014 09:15 AM, Michael Prix wrote:
 Hello Steven,
 
 it is possible, but a bit tricky:
 Via Open Channel... you reference a tdpo.opt. In this tdpo.opt you
 name a dsm.opt, and in this dsm.opt you can specify via include
 /tdpo_fs/.../* MC_NAME your
 managment-class.
 
 The differenciation between db-backups and log-backups are done in the
 rman-script. In one you do a backup database, in the other a backup
 archivelogs.
 You have to have two different scripts, or close and open the channels
 in between.Each open channel sources a different tdpo.opt which calls
 a different dsm.opt. During the backup database, some archivelogs will
 also be backed up, but this might not be the problem in this construct.
 
 -- 
 Mit freundlichen Grüßen / kind regards
 
 Michael Prix
 
 On 02/04/2014 02:54 PM, Steven Langdale wrote:
 All

 We have quite a few large oracle nodes that backup via RMAN  TDPO. 
They
 currently run LAN Free.

 Does anyone know if it's possible to do the main DB LAN Free and 
specify a
 different management class for the archive redo logs?  they are ~1GB 
each,
 so a disk pool is a better destination.

 The Oracle nodes are AIX if that makes a difference.

 Thanks

 Steven

-- 
Hello World.David Bronder - Systems 
Architect
Segmentation Fault  ITS-EI, Univ. of 
Iowa
Core dumped, disk trashed, quota filled, soda warm. 
david-bron...@uiowa.edu

Antwort: [ADSM-L] TDPOracle version for oracle R12 on AIX

[Rainer Holzinger]

Hi Bill,

as far as I can see, even TDPO 7.1 is not supporting Oracle 12 on AIX.
However, Oracle 12 support is given within TDPO 7.1 for Linux, Solaris and
Windows,
which of course doesn't solve your requirement.

Check out this link:

http://www-01.ibm.com/support/docview.wss?uid=swg21654366

Best regards,
Rainer




Rainer Holzinger
Senior IT-Berater
IBM Certified Associate - Tivoli Storage Manager V6.2

Empalis Consulting GmbH
Wankelstr. 14
70563 Stuttgart
Tel.  +49 711 46928 260
Fax  +49 711 46928 239
Mobil: +49 162 2807888
mailto:rainer.holzin...@empalis.com

http://www.empalis.com




Von:Bill Boyer bjdbo...@comcast.net
An: ADSM-L@VM.MARIST.EDU
Datum:  02.01.2014 21:10
Betreff:[ADSM-L] TDPOracle version for oracle R12 on AIX
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



What version of the TDPO agent do I need to support Oracle 12 on AIX?



Bill Boyer
DSS, Inc.
(610) 927-4407
Enjoy life. It has an expiration date. - ??

image/gif

Antwort: [ADSM-L] ANR8235W

[Rainer Holzinger]

Hi Eric,

which TSM Server level did you install?
I noticed this from TSM Server levels before 6.3 as well, as there has
been the
possibiliy to use IOCP or TCP/IP for communications between thze TSM
Server and
DB2. Default was to use IOCP there, TCP/IP had to be done manually.
Since TSM V6.3 TCP/IP is used by default to prevent the communication
limit
of max. 1024 sessions for ICOP.
The message you are getting is nothing serious, even if it's a warning.

Hope this helps.
Best regards,
Rainer



Von:Loon, EJ van - SPLXM eric-van.l...@klm.com
An: ADSM-L@VM.MARIST.EDU
Datum:  25.07.2013 10:44
Betreff:[ADSM-L] ANR8235W
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Hi TSM-ers!

I installed two new servers on AIX and both are working fine. The only
thing I notice is the following message at server startup:



ANR8235W This server is not configured to use TCP/IP to connect to  the
database manager.



I can't find anything useful on the IBM web site, only cases where this
message was presented and the server couldn't be started. My servers are
running fine!

To make is even more confusing, this is what's in the Messages guide:



ANR8235W (Windows): Requested number of NETBIOS sessions are not
available on adapter network adapter number, proceeding with available
sessions.



So one message id seems to be used for two different reasons???

Thanks for any help in advance!

Kind regards,

Eric van Loon

Air France/KLM Storage Engineering


For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain
confidential and privileged material intended for the addressee only. If
you are not the addressee, you are notified that no part of the e-mail or
any attachment may be disclosed, copied or distributed, and that any other
action related to this e-mail or attachment is strictly prohibited, and
may be unlawful. If you have received this e-mail by error, please notify
the sender immediately by return e-mail, and delete this message.

Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
employees shall not be liable for the incorrect or incomplete transmission
of this e-mail or any attachments, nor responsible for any delay in
receipt.
Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch
Airlines) is registered in Amstelveen, The Netherlands, with registered
number 33014286

Antwort: Re: [ADSM-L] TSM licence problem on Linux --tsm v 6.3.3.

[Rainer Holzinger]

Hi,

I used 6.3.3.0 installation files from partner world for AIX and Linux 
without any problems.

@Vikas:
At installation time, there is a question about nthe components to 
install. Did you select the TSM
license for installation like shown in the example below?


Select the components to install.


1- Tivoli Storage Manager server
2- Tivoli Storage Manager server languages
3- Tivoli Storage Manager license
4- Tivoli Storage Manager devices
5- Tivoli Storage Manager storage agent

ENTER A COMMA-SEPARATED LIST OF NUMBERS REPRESENTING THE DESIRED WANTED: 
1,3,4

Best regards,
Rainer


Rainer Holzinger
Senior IT-Berater
IBM Certified Associate - Tivoli Storage Manager V6.2

Empalis Consulting GmbH
Wankelstr. 14
70563 Stuttgart
Tel.  +49 711 46928 260
Fax  +49 711 46928 239
Mobil: +49 162 2807888
mailto:rainer.holzin...@empalis.com

http://www.empalis.com



Von:Loon, EJ van - SPLXM eric-van.l...@klm.com
An: ADSM-L@VM.MARIST.EDU
Datum:  24.07.2013 16:05
Betreff:Re: [ADSM-L] TSM licence problem on Linux --tsm v 6.3.3.
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Hi Vikas!
I'm using 6.2 servers and I used both the AIX as the Linux version from 
Passport Advantage to install the license files. So I don't know why it's 
not included in the 6.3 code... IBM?
Kind regards,
Eric van Loon
AF/KLM Storage Engineering


-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Vikas Arora
Sent: woensdag 24 juli 2013 12:32
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TSM licence problem on Linux --tsm v 6.3.3.

Yes, but it is the same through installation wizard too.

Do you have the same version on linux? does it work for you?

Thanks


Grüße
Vikas Arora*
*
*e Mail* : vikar...@gmail.com


On 24 July 2013 11:46, Loon, EJ van - SPLXM eric-van.l...@klm.com wrote:

 Hi Vikas!
 This should be the base level for 6.3. The TSM server code on Passport 
 Advantage should always be the base code, along with the licenses, 
 upgrades can be downloaded from the public FTP server, without an IBM 
id.
 Have you tried an installation through the installation wizard?
 Kind regards,
 Eric van Loon
 AF/KLM Storage Engineering

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf 
 Of Vikas Arora
 Sent: woensdag 24 juli 2013 11:36
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: TSM licence problem on Linux --tsm v 6.3.3.

 Hi Eric,

 I have installed from the same package and there are no licence file in 
it.

 Normally, It should have this license rpm file ( from 6.2) , but not 
 there in the code package mentioned above. I also looked in V6.3.1 ( 
 Linux
 x86_64) also but no luck.

 degtlun:~ # rpm -qa |grep -i TIVsm-license
 *TIVsm-license-6.2.1-0*

 Do you know if or where I can locate base level for v6.3.0, which 
 normally contains licences files?


 Grüße
 Vikas Arora*
 *
 *e Mail* : vikar...@gmail.com


 On 24 July 2013 11:30, Loon, EJ van - SPLXM eric-van.l...@klm.com 
wrote:

  Hi Vikas!
  I pasted the wrong one in here, you need the following package:
  IBM Tivoli Storage Manager V6.3.3 Linux x86_64 Server and Storage 
  Agent,
  Multilingual(CICI7ML)
  Sorry!
  Kind regards,
  Eric van Loon
  AF/KLM Storage Engineering
 
 
  -Original Message-
  From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On 
  Behalf Of Vikas Arora
  Sent: woensdag 24 juli 2013 11:17
  To: ADSM-L@VM.MARIST.EDU
  Subject: Re: TSM licence problem on Linux --tsm v 6.3.3.
 
  Hello,
 
  Thanks for your prompt response, Will it be also compatible on* 
  Linux
  x86_64
  * in my case?
 
   IBM Tivoli Storage Manager V6.3.3 *Linux s390x* Server and Storage 
  Agent,
  Multilingual(CICI9ML)
 
  thanks
 
 
 
  Grüße
  Vikas Arora*
  *
  *e Mail* : vikar...@gmail.com
 
 
  On 24 July 2013 11:03, Loon, EJ van - SPLXM eric-van.l...@klm.com
 wrote:
 
   Hi Vikas!
   Within Passport Advantage you will find the package IBM Tivoli 
   Storage Manager V6.3.3 Linux s390x Server and Storage Agent,
  Multilingual(CICI9ML).
   This one contains the license files.
   Kind regards,
   Eric van Loon
   AF/KLM Storage Engineering
  
  
   -Original Message-
   From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On 
   Behalf Of Vikas Arora
   Sent: woensdag 24 juli 2013 9:44
   To: ADSM-L@VM.MARIST.EDU
   Subject: TSM licence problem on Linux --tsm v 6.3.3.
  
   Helllo All,
  
   I have done a fresh install of a new tsm server with v 6.3.3. on 
linux.
   But unable to register licenses.
  
   ​I have tried giving full file name and paths but same result.​
  
  
   ​tsm: TSMDEESW101reg lice file=*.lic ANR2852I Current license
   information:
   ANR9638W License registration is not supported on this server.
   ANS8001I Return code 3.​
  
   As understood, TSM license file should be installed from base 
   version of
   6.3 i.e  V6.3.0 but I

Antwort: Re: [ADSM-L] Antwort: Re: [ADSM-L] TSM licence problem on Linux --tsm v 6.3.3.

[Rainer Holzinger]

Hi Vikas,

the option to install TSM licenses is offered in the installation dialog 
ONLY with TSM Server 
base packages like 6.3.0.0, 6.3.2.0, 6.3.3.0 or 6.3.4.0 from passport 
advantage or partner world.
I don't know if there ever has been 6.3.1.0 on partner world for download.

Anyway, I have installed and upgaded about 14 -18 TSM instances on AIX and 
Linux (SLES11)
to levels 6.3.3.200 and 6.3.40 wihtin the last 3 month and never had 
problems to install the TSM
licenses as well.

Are you able to provide your installation dialogue?

Best regards, 
Rainer 
 


Rainer Holzinger
Senior IT-Berater
IBM Certified Associate - Tivoli Storage Manager V6.2

Empalis Consulting GmbH
Wankelstr. 14
70563 Stuttgart
Tel.  +49 711 46928 260
Fax  +49 711 46928 239
Mobil: +49 162 2807888
mailto:rainer.holzin...@empalis.com

http://www.empalis.com

Geschäftsführer: Rainer Schilling, Peter Röder
Amtsgericht Stuttgart, HRB 738239

Diese e-Mail einschließlich ihrer Anhänge ist evtl. vertraulich. Wir 
bitten, 
eine fehlgeleitete e-Mail unverzüglich vollständig zu löschen und uns eine 

Nachricht zukommen zu lassen. Wir haben die e-Mail beim Ausgang auf Viren 
geprüft, wir raten jedoch wegen der Gefahr auf den Übertragungswegen zu 
einer Eingangskontrolle. Eine Haftung für Virenbefall schließen wir aus.



Von:Vikas Arora vikar...@gmail.com
An: ADSM-L@VM.MARIST.EDU
Datum:  24.07.2013 16:23
Betreff:Re: [ADSM-L] Antwort: Re: [ADSM-L] TSM licence problem on 
Linux --tsm v 6.3.3.
Gesendet von:   ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Thanks for your replies guys.

@Rainer : thats strange, for me there were no options to install license,
even I tried for v6.3.1 both file sets were downloaded from passport site.

Once again option 3 was missing. I have re-checked it and it doesn't show.

thanks.


Grüße
Vikas Arora*
*
*e Mail* : vikar...@gmail.com


On 24 July 2013 16:11, Rainer Holzinger 
rainer.holzin...@empalis.comwrote:

 Hi,

 I used 6.3.3.0 installation files from partner world for AIX and Linux
 without any problems.

 @Vikas:
 At installation time, there is a question about nthe components to
 install. Did you select the TSM
 license for installation like shown in the example below?


 *Select the components to install.*


 *1- Tivoli Storage Manager server*
 *2- Tivoli Storage Manager server languages*
 *3- Tivoli Storage Manager license*
 *4- Tivoli Storage Manager devices*
 *5- Tivoli Storage Manager storage agent*

 *ENTER A COMMA-SEPARATED LIST OF NUMBERS REPRESENTING THE DESIRED 
WANTED:
 1,3,4*

 Best regards,
 Rainer


 

 Rainer Holzinger
 Senior IT-Berater
 IBM Certified Associate - Tivoli Storage Manager V6.2

 Empalis Consulting GmbH
 Wankelstr. 14
 70563 Stuttgart
 Tel.  +49 711 46928 260
 Fax  +49 711 46928 239
 Mobil: +49 162 2807888
 mailto:rainer.holzin...@empalis.com rainer.schill...@empalis.com

 http://www.empalis.com



 Von:Loon, EJ van - SPLXM eric-van.l...@klm.com
 An:ADSM-L@VM.MARIST.EDU
 Datum:24.07.2013 16:05
 Betreff:Re: [ADSM-L] TSM licence problem on Linux --tsm v 6.3.3.
 Gesendet von:ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
 --



 Hi Vikas!
 I'm using 6.2 servers and I used both the AIX as the Linux version from
 Passport Advantage to install the license files. So I don't know why 
it's
 not included in the 6.3 code... IBM?
 Kind regards,
 Eric van Loon
 AF/KLM Storage Engineering


 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU
ADSM-L@VM.MARIST.EDU]
 On Behalf Of Vikas Arora
 Sent: woensdag 24 juli 2013 12:32
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: TSM licence problem on Linux --tsm v 6.3.3.

 Yes, but it is the same through installation wizard too.

 Do you have the same version on linux? does it work for you?

 Thanks


 Grüße
 Vikas Arora*
 *
 *e Mail* : vikar...@gmail.com


 On 24 July 2013 11:46, Loon, EJ van - SPLXM eric-van.l...@klm.com 
wrote:

  Hi Vikas!
  This should be the base level for 6.3. The TSM server code on Passport
  Advantage should always be the base code, along with the licenses,
  upgrades can be downloaded from the public FTP server, without an IBM 
id.
  Have you tried an installation through the installation wizard?
  Kind regards,
  Eric van Loon
  AF/KLM Storage Engineering
 
  -Original Message-
  From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU
ADSM-L@VM.MARIST.EDU]
 On Behalf
  Of Vikas Arora
  Sent: woensdag 24 juli 2013 11:36
  To: ADSM-L@VM.MARIST.EDU
  Subject: Re: TSM licence problem on Linux --tsm v 6.3.3.
 
  Hi Eric,
 
  I have installed from the same package and there are no licence file 
in
 it.
 
  Normally, It should have this license rpm file ( from 6.2) , but not
  there in the code package mentioned above. I also looked

AW: [ADSM-L] upgrade 5.5.4 to 6.2.4 problem.

[Rainer Holzinger]

Hi,
this is what I said yesterday.
dsmserv load is o.k. from installation point of view. From migration point of 
view you need to do dsmserv loadformat which creates an empty DB.

Cheers,
Rainer
Gesendet mit BlackBerry von Vodafone

-Original Message-
From: Lee, Gary g...@bsu.edu
Sender: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Date: Fri, 1 Mar 2013 14:59:05 
To: ADSM-L@VM.MARIST.EDU
Reply-To: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] upgrade 5.5.4 to 6.2.4 problem.

Thanks to all for your assistance.
Got the insert to run finally.  I cut and pasted examples from the upgrade 
guide.  The examples were incorrect.  They ran dsmserv format not dsmserv 
loadformat.

I somehow overlooked the load.

Changed that and all is wel.  Now to check the new tsm instance against our 
existing production server to see how well the upgrade went.

Again, thanks all.



Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310

 

AW: [ADSM-L] 5.5.4 to 6.2.4 upgrade problem

[Rainer Holzinger]

Hi Gary,

most likely this is caused by the way you formatted your new TSM V6 db.
If you plan to do an 'insertdb' you have to format your new TSMV6 db by
using

DSMSERV  LOADFORMAT ...

which creates an empty database that is required by 'insertdb'.

Best regards,
Rainer  

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Lee, Gary
Gesendet: Donnerstag, 28. Februar 2013 16:48
An: ADSM-L@VM.MARIST.EDU
Betreff: [ADSM-L] 5.5.4 to 6.2.4 upgrade problem

Got the extract finished yesterday, all went well.
Thanks all for the assistance.

Now attempting to move the extracted data into the 6.2.4 server's database.

Per the upgrade guide, removed the tsm db as follows:

Dsmserv removed TSMDB1

2. Formatted a new db specifying all necessary directories.  Message
returned that format was completed and offline backup completed.

3.  insured that devconfig file existed and contained devclass info for the
extracted data.

4.  verified dsmserv.opt contained correct directories for logs etc.

5. tried the dsmserv insertdb specifying userid, instance_directory, and
device class.
Received the following.

ANR7800I DSMSERV generated at 14:29:06 on Mar  8 2012.

Tivoli Storage Manager for Linux/x86_64
Version 6, Release 2, Level 4.000

Licensed Materials - Property of IBM

(C) Copyright IBM Corporation 1990, 2010.
All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.

ANR7801I Subsystem process ID is 8638.
ANR0900I Processing options file /home/tsminst1/tsminst1/dsmserv.opt.
ANR7814I Using instance directory /home/tsminst1/tsminst1.
ANR4726I The ICC support module has been loaded.
ANR0990I Server restart-recovery in progress.
ANR0152I Database manager successfully started.
ANR1380I The buffer pool monitor switch is enabled.
ANR1636W The server machine GUID changed: old value (), new value
(8c.ee.4f.49-
.48.fc.e1.11.b0.22.00.1a.4b.be.56.78).
ANR8200I TCP/IP Version 4 driver ready for connection with clients on port
1500.
ANR1335E INSERTDB: Database TSMDB1 cannot be the target of an upgrade
because
it is not empty.
ANR0369I Stopping the database manager because of a server shutdown.


I am confused.  How can I get the dabase any emptier?

If necessary, I can supply all shell scripts used.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310

 

AW: [ADSM-L] Storage Agent version

[Rainer Holzinger]

Hi,

we tried STA 5.5 on AIX with TSM Server 6.3.3.0 on AIX which is not working.
Minumum STA Level for TSM 6.3.3.0 Server is 6.1.

Regards,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Huebner, Andy
Gesendet: Dienstag, 26. Februar 2013 21:02
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] Storage Agent version

I have STA 5.4 running on a 6.2 server.  Same spread on versions.

Andy Huebner

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
David Rigaudiere
Sent: Tuesday, February 26, 2013 12:38 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Storage Agent version

STA should be at same level as server. 

Le 26 févr. 2013 à 19:31, Robert Ouzen rou...@univ.haifa.ac.il a écrit :

 Hi to all
 
 Anybody now if  Storage agent version 5.5.2 is working against a TSM
server of 6.3.3.100 or needed a Storage agent of version 6+
 
 Regards Robert

AW: [ADSM-L] prerequisite checker

[Rainer Holzinger]

Hi Eric,

as far as I know, there is no prerequisite checker devlivered with TSM V
6.2, it came with 6.3 (or even 6.3.3).

In TSM 6.3 the prerequisite checker don't need to be installed, it comes
from extracting the TSM V6 Server Package. The file name is
'prereqcheck.bin.

Hope this helps.

Best regards,
Rainer Holzinger
Empalis Consulting GmbH
Wankelstr. 14
D-70563 Stuttgart

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Loon, EJ van - SPLXM
Gesendet: Donnerstag, 7. Februar 2013 11:45
An: ADSM-L@VM.MARIST.EDU
Betreff: [ADSM-L] prerequisite checker

Hi TSM-ers!

I would like to install the 6.2 AIX server on an existing 5.5 server.
The 6.3 server comes with a tool called the prerequisite checker, which
I was hoping to use before installing 6.2. I'm a bit confused by the
manual, it states:

 

Ensure that the appropriate installation package is downloaded and that
its files are extracted. A prerequisite checker is part of the
installation package.

 

It says extracted, so not installed. However, if I download the 6.3
server from Passport Advantage it's a .bin file, which can only be
installed as far as I know, right? So how do I just extract the
prerequisite checker from this package?

Thanks for your help in advance!

Kind regards,

Eric van Loon

KLM Royal Dutch Airlines


For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment may
be disclosed, copied or distributed, and that any other action related to
this e-mail or attachment is strictly prohibited, and may be unlawful. If
you have received this e-mail by error, please notify the sender immediately
by return e-mail, and delete this message.

Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
employees shall not be liable for the incorrect or incomplete transmission
of this e-mail or any attachments, nor responsible for any delay in receipt.
Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch
Airlines) is registered in Amstelveen, The Netherlands, with registered
number 33014286

AW: [ADSM-L] prerequisite checker

[Rainer Holzinger]

Hi Eric,

right, but you have to extract the package for example by:

./TSM_V6.3.3_AIX_Server.bin

Ensure that you have enough disk space available for the extract,
And it will take a while. After the extract completed you will find
'prereqcheck.bin'.

Best regards,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Loon, EJ van - SPLXM
Gesendet: Donnerstag, 7. Februar 2013 12:31
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] prerequisite checker

Hi Rainer!
I know it's not part of 6.2, so I looked at the 6.3 package on Passport
Advantage, but the server code comes in one just one package, a .bin file,
so no separate prereqcheck.bin...
Kind regards,
Eric van Loon
AF/KLM Storage Engineering

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Rainer Holzinger
Sent: donderdag 7 februari 2013 12:22
To: ADSM-L@VM.MARIST.EDU
Subject: AW: [ADSM-L] prerequisite checker

Hi Eric,

as far as I know, there is no prerequisite checker devlivered with TSM V
6.2, it came with 6.3 (or even 6.3.3).

In TSM 6.3 the prerequisite checker don't need to be installed, it comes
from extracting the TSM V6 Server Package. The file name is
'prereqcheck.bin.

Hope this helps.

Best regards,
Rainer Holzinger
Empalis Consulting GmbH
Wankelstr. 14
D-70563 Stuttgart

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Loon, EJ van - SPLXM
Gesendet: Donnerstag, 7. Februar 2013 11:45
An: ADSM-L@VM.MARIST.EDU
Betreff: [ADSM-L] prerequisite checker

Hi TSM-ers!

I would like to install the 6.2 AIX server on an existing 5.5 server.
The 6.3 server comes with a tool called the prerequisite checker, which I
was hoping to use before installing 6.2. I'm a bit confused by the manual,
it states:

 

Ensure that the appropriate installation package is downloaded and that its
files are extracted. A prerequisite checker is part of the installation
package.

 

It says extracted, so not installed. However, if I download the 6.3 server
from Passport Advantage it's a .bin file, which can only be installed as far
as I know, right? So how do I just extract the prerequisite checker from
this package?

Thanks for your help in advance!

Kind regards,

Eric van Loon

KLM Royal Dutch Airlines


For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment may
be disclosed, copied or distributed, and that any other action related to
this e-mail or attachment is strictly prohibited, and may be unlawful. If
you have received this e-mail by error, please notify the sender immediately
by return e-mail, and delete this message.

Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
employees shall not be liable for the incorrect or incomplete transmission
of this e-mail or any attachments, nor responsible for any delay in receipt.
Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch
Airlines) is registered in Amstelveen, The Netherlands, with registered
number 33014286


For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment may
be disclosed, copied or distributed, and that any other action related to
this e-mail or attachment is strictly prohibited, and may be unlawful. If
you have received this e-mail by error, please notify the sender immediately
by return e-mail, and delete this message. 

Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
employees shall not be liable for the incorrect or incomplete transmission
of this e-mail or any attachments, nor responsible for any delay in receipt.

Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch
Airlines) is registered in Amstelveen, The Netherlands, with registered
number 33014286

AW: [ADSM-L] prerequisite checker

[Rainer Holzinger]

Hi Eric,

yes, it is.

You're welcome.

Best regards,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Loon, EJ van - SPLXM
Gesendet: Donnerstag, 7. Februar 2013 16:34
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] prerequisite checker

Hi Rainer!
I found it, it's inside the bin file itself. Thanks for your help!
Kind regards,
Eric van Loon
AF/KLM Storage Engineering


-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Rainer Holzinger
Sent: donderdag 7 februari 2013 12:40
To: ADSM-L@VM.MARIST.EDU
Subject: AW: [ADSM-L] prerequisite checker

Hi Eric,

right, but you have to extract the package for example by:

./TSM_V6.3.3_AIX_Server.bin

Ensure that you have enough disk space available for the extract, And it
will take a while. After the extract completed you will find
'prereqcheck.bin'.

Best regards,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Loon, EJ van - SPLXM
Gesendet: Donnerstag, 7. Februar 2013 12:31
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] prerequisite checker

Hi Rainer!
I know it's not part of 6.2, so I looked at the 6.3 package on Passport
Advantage, but the server code comes in one just one package, a .bin file,
so no separate prereqcheck.bin...
Kind regards,
Eric van Loon
AF/KLM Storage Engineering

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Rainer Holzinger
Sent: donderdag 7 februari 2013 12:22
To: ADSM-L@VM.MARIST.EDU
Subject: AW: [ADSM-L] prerequisite checker

Hi Eric,

as far as I know, there is no prerequisite checker devlivered with TSM V
6.2, it came with 6.3 (or even 6.3.3).

In TSM 6.3 the prerequisite checker don't need to be installed, it comes
from extracting the TSM V6 Server Package. The file name is
'prereqcheck.bin.

Hope this helps.

Best regards,
Rainer Holzinger
Empalis Consulting GmbH
Wankelstr. 14
D-70563 Stuttgart

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Loon, EJ van - SPLXM
Gesendet: Donnerstag, 7. Februar 2013 11:45
An: ADSM-L@VM.MARIST.EDU
Betreff: [ADSM-L] prerequisite checker

Hi TSM-ers!

I would like to install the 6.2 AIX server on an existing 5.5 server.
The 6.3 server comes with a tool called the prerequisite checker, which I
was hoping to use before installing 6.2. I'm a bit confused by the manual,
it states:

 

Ensure that the appropriate installation package is downloaded and that its
files are extracted. A prerequisite checker is part of the installation
package.

 

It says extracted, so not installed. However, if I download the 6.3 server
from Passport Advantage it's a .bin file, which can only be installed as far
as I know, right? So how do I just extract the prerequisite checker from
this package?

Thanks for your help in advance!

Kind regards,

Eric van Loon

KLM Royal Dutch Airlines


For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment may
be disclosed, copied or distributed, and that any other action related to
this e-mail or attachment is strictly prohibited, and may be unlawful. If
you have received this e-mail by error, please notify the sender immediately
by return e-mail, and delete this message.

Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
employees shall not be liable for the incorrect or incomplete transmission
of this e-mail or any attachments, nor responsible for any delay in receipt.
Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch
Airlines) is registered in Amstelveen, The Netherlands, with registered
number 33014286


For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment may
be disclosed, copied or distributed, and that any other action related to
this e-mail or attachment is strictly prohibited, and may be unlawful. If
you have received this e-mail by error, please notify the sender immediately
by return e-mail, and delete this message. 

Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
employees shall not be liable for the incorrect or incomplete transmission
of this e-mail or any attachments, nor responsible for any delay in receipt.

Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal

AW: [ADSM-L] 6.4 docs

[Rainer Holzinger]

Hi Andy,

for me the 6.4 Info Center is still not working.
Following the link still results in service temporarily unavailable.

Best regards,
Rainer 

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Andrew Raibeck
Gesendet: Montag, 19. November 2012 20:37
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] 6.4 docs

6.4 Info Center is back up.

Best regards,

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Product Development
Level 3 Team Lead
Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS
Internet e-mail: stor...@us.ibm.com

IBM Tivoli Storage Manager support web page:
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Stor
age_Manager

ADSM: Dist Stor Manager ADSM-L@vm.marist.edu wrote on 2012-11-19
11:30:47:

 From: Stefan Folkerts stefan.folke...@gmail.com
 To: ADSM-L@vm.marist.edu,
 Date: 2012-11-19 11:34
 Subject: Re: 6.4 docs
 Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu

 Simon is the man of the day for me! :-D


 On Mon, Nov 19, 2012 at 9:37 AM, Erwann Simon erwann.si...@free.fr
wrote:

  Hi all,
 
  It's not working for me either.
 
  Here's a dropbox link to the new publications (.pdf):
  http://db.tt/LWQajxwi
 
  You'll also find a quick review of the new functions.
 
  Regards,
  Erwann
 
 
  Remco Post r.p...@plcs.nl a écrit :
 
  Hi all,
  
  anyone getting something useful from
  http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4 ?
 
  --
  Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté.
 
=

AW: [ADSM-L] AW: [ADSM-L] 6.4 docs

[Rainer Holzinger]

Excellent, thanks a lot.

Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Angela Robertson
Gesendet: Dienstag, 20. November 2012 14:40
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs

The 6.4 Info Center is available:
http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4/index.jsp

The ibm.com team has been contacted and the problem should not happen
again. That said, if the problem persists, thanks for your patience. No one
wants the site down... Angela


Angela Robertson
IBM Software Group, Tivoli Software
Durham, NC 27703
aprob...@us.ibm.com

“We are what we repeatedly do. Excellence, then, is not an act, but a
habit.” - Aristotle

ADSM: Dist Stor Manager ADSM-L@vm.marist.edu wrote on 11/20/2012
03:33:15 AM:

 Rainer Holzinger rainerholzin...@gmx.de
 Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu

 11/20/2012 03:33 AM

 Please respond to
 ADSM: Dist Stor Manager ADSM-L@vm.marist.edu

 To

 ADSM-L@vm.marist.edu,

 cc

 Subject

 [ADSM-L] AW: [ADSM-L] 6.4 docs

 Hi Andy,

 for me the 6.4 Info Center is still not working.
 Following the link still results in service temporarily unavailable.

 Best regards,
 Rainer

 -Ursprüngliche Nachricht-
 Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
 Andrew Raibeck
 Gesendet: Montag, 19. November 2012 20:37
 An: ADSM-L@VM.MARIST.EDU
 Betreff: Re: [ADSM-L] 6.4 docs

 6.4 Info Center is back up.

 Best regards,

 Andy Raibeck
 IBM Software Group
 Tivoli Storage Manager Client Product Development
 Level 3 Team Lead
 Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS
 Internet e-mail: stor...@us.ibm.com

 IBM Tivoli Storage Manager support web page:

http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Stor

 age_Manager

 ADSM: Dist Stor Manager ADSM-L@vm.marist.edu wrote on 2012-11-19
 11:30:47:

  From: Stefan Folkerts stefan.folke...@gmail.com
  To: ADSM-L@vm.marist.edu,
  Date: 2012-11-19 11:34
  Subject: Re: 6.4 docs
  Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu
 
  Simon is the man of the day for me! :-D
 
 
  On Mon, Nov 19, 2012 at 9:37 AM, Erwann Simon erwann.si...@free.fr
 wrote:
 
   Hi all,
  
   It's not working for me either.
  
   Here's a dropbox link to the new publications (.pdf):
   http://db.tt/LWQajxwi
  
   You'll also find a quick review of the new functions.
  
   Regards,
   Erwann
  
  
   Remco Post r.p...@plcs.nl a écrit :
  
   Hi all,
   
   anyone getting something useful from
   http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4 ?
  
   --
   Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté.
  
 =

AW: [ADSM-L] extract errors on installation file '6.3.1.000-TIV-TSMALL-AIX.bin'

[Rainer Holzinger]

Richard,

you were right. After downloading the bin file with the FireFTP client in
binary mode, no problem extracting the file anymore.
Upgrades went fine as well.

Thanks,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Richard Sims
Gesendet: Montag, 23. Juli 2012 19:23
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] extract errors on installation file
'6.3.1.000-TIV-TSMALL-AIX.bin'

Rainer -

Your posting doesn't say exactly how you downloaded the bin file.  Problems
using software downloaded with FTP are commonly due to the download not
having been performed in Binary mode.  Given that the bin file has a Feb 28
date, I would expect it to be in good condition (but nothing in life is
guaranteed).

Richard Sims

extract errors on installation file '6.3.1.000-TIV-TSMALL-AIX.bin'

[Rainer Holzinger]

Hi all,



I have downloaded  the TSM Server 6.3.1.000 installation file for AIX from
site 'ftp://service.boulder.ibm.com/storage/tivoli-storage-management/' to
upgrade a level 6.3.0.0 test server.

After having scp'ed the file to AIX and invoked by
'./6.3.1.000-TIV-TSMALL-AIX.bin', the extract begins but shows many messages
like



  error:  invalid compressed data to inflate



  error:  invalid compressed data to inflate

file #1186:  bad zipfile offset (local header sig):  757113400

file #1187:  bad zipfile offset (local header sig):  757660510

file #1188:  bad zipfile offset (local header sig):  758324212

file #1189:  bad zipfile offset (local header sig):  758913923

file #1190:  bad zipfile offset (local header sig):  759408992

file #1191:  bad zipfile offset (local header sig):  759902824

file #1192:  bad zipfile offset (local header sig):  760315810

file #1193:  bad zipfile offset (local header sig):  760736980

file #1194:  bad zipfile offset (local header sig):  761358120

file #1195:  bad zipfile offset (local header sig):  761997469

file #1196:  bad zipfile offset (local header sig):  762670566

file #1197:  bad zipfile offset (local header sig):  763250113

file #1198:  bad zipfile offset (local header sig):  763882438

file #1199:  bad zipfile offset (local header sig):  764524274

file #1200:  bad zipfile offset (local header sig):  765141777

file #1201:  bad zipfile offset (local header sig):  765771367

file #1202:  bad zipfile offset (local header sig):  766368944



After the extract finished there is at least no 'install.bin' file existing,
but I guess a lot of other files are missed as well. I tried the download
and scp a couple of times but the extract was without success all the time.
I even tried on different AIX servers. The byte count is the same at the ftp
site, downloaded file to Win XP and the scp'ed file.



Any idea what could cause the extract error?



Thanks in advance,

Rainer

AW: [ADSM-L] extract errors on installation file '6.3.1.000-TIV-TSMALL-AIX.bin'

[Rainer Holzinger]

Richard,

you might be right, I didn't take this simple fact into account.
I just installed 'FireFTP' from Mozilla Firefox and started the download
again. It might take a while until having a result for the extract of the
new downloaded bin file.

Thanks so far,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Richard Sims
Gesendet: Montag, 23. Juli 2012 19:23
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] extract errors on installation file
'6.3.1.000-TIV-TSMALL-AIX.bin'

Rainer -

Your posting doesn't say exactly how you downloaded the bin file.  Problems
using software downloaded with FTP are commonly due to the download not
having been performed in Binary mode.  Given that the bin file has a Feb 28
date, I would expect it to be in good condition (but nothing in life is
guaranteed).

Richard Sims

delete volumehistory

[Rainer Holzinger]

Hi all,



is it possible that a TSM LM server can delete DBB volumes from a TSM LC
server that doesn't exist anymore?



Thanks and best regards,

Rainer

AW: [ADSM-L] delete volumehistory

[Rainer Holzinger]

Hi Zoltan,

great, this was what I was looking for.

Thanks a lot,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Zoltan Forray/AC/VCU
Gesendet: Dienstag, 2. August 2011 17:36
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] delete volumehistory

Sure - Let the force be with you (sorry - couldn't resist  ;---)

DELETE  VOLHISTORY todate=today volume=your-volume-number type=remote
force=yes

You still might need to change the volume status to scratch on the LM
after your deleted it.


Zoltan Forray
TSM Software  Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you reply with your password, social
security number or confidential personal information. For more details
visit http://infosecurity.vcu.edu/phishing.html




From:
Rainer Holzinger rainerholzin...@gmx.de
To:
ADSM-L@VM.MARIST.EDU
Date:
08/02/2011 10:39 AM
Subject:
[ADSM-L] delete volumehistory
Sent by:
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU



Hi all,



is it possible that a TSM LM server can delete DBB volumes from a TSM LC
server that doesn't exist anymore?



Thanks and best regards,

Rainer

AW: [ADSM-L] Technical Exchange Series Webinars

[Rainer Holzinger]

Hi,

nothing to complain from my side.

Greetings,
Rainer

-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag von
Dave Canan
Gesendet: Montag, 25. Juli 2011 20:14
An: ADSM-L@VM.MARIST.EDU
Betreff: Re: [ADSM-L] Technical Exchange Series Webinars

Let me pose this to the listserv here. Are others also having this problem
when listening the to Technical Exchange sessions? If this is isolated to
just Thomas then it might be an issue on his side. If there are multiple
people here, please let me know and I can bring it to the attention of the
group that hosts these. Please let me know.

On Mon, Jul 25, 2011 at 9:12 AM, Thomas Denier 
thomas.den...@jeffersonhospital.org wrote:

 -Dave Canan wrote: -

 Thomas, I can follow up with this. Do you have some specific examples
 of some webinars that were bad recording quality? Let me knoiw via the
 list, or you can also send me an email to my work ID at
 ddca...@us.ibm.com.

 I had trouble with the webinar on using HADR to replicate the TSM
 Version 6 database. I don't see how recording quality could be an
 issue, since I was listening to the presentation in real time
 rather than listening to a recording later on. As I recall, the
 webinar started with a moderator introducing the main speaker.
 The introduction started off with poor but not intolerable audio
 quality and gradually deteriorated until I recognize about one
 word in five. I hung around to see if things would get better when
 the main speaker started. The audio quality did not improve when the
 main speaker started. I gave up on listening to the presentation
 and settled for reviewing the slides.

ANS1575E Journal Daemon Communications Error.

[Rainer Holzinger]

Hi all,



I'm having a TSM Windows client which has errors using the JBB method.



Windows: 2003 SP2 (32-bit)

TSM client:   6.2.3.0



The backups have been working for about 3 weeks without any problems.
Now the following messages appear in TSM client error log when the TSM
Journal service is being started:

04/26/2011 14:15:41 ANS0361I DIAG: jnlPing(): Invalid ping response:
verb=0x0a, length=5.

04/26/2011 14:15:41 ANS0361I DIAG: jnlRead(): Ping failed, Journal
Daemon not responding.

04/26/2011 14:15:41 ANS0361I DIAG: JnlQueryResponseThread(tid 4600):
Error Reading query response, jnlRead(): rc=-1.

04/26/2011 14:15:41 ANS0361I DIAG: BaJournaled(): jnlNextQueryResp():
returned journal read error.

04/26/2011 14:15:41 ANS1575E Journal Daemon Communications Error.



These messages are in 'jbberror' log:

04/26/2011 14:25:15 NpWrite(): Connection has been closed.

04/26/2011 14:25:15 sendClientResponse(): error sending response -
client severed pipe connection.

04/26/2011 14:25:15 processJournalQuery(): Error sending Query Results
Query response.



'tsmjbbd.ini' looks like:

; Journal Service configuration for FORCLUSTER-MAPS on disk L:

:

[JournalSettings]

Nlsrepos=dscameng.txt

Errorlog=jbberror.forcluster-maps.log

JournalDir=L:\TSM

JournalPipe=\\.\pipe\forcluster-maps

;

[JournalExcludeList]

%SystemRoot%\System32\Config\*

%SystemDrive%\Adsm.Sys\*

%TEMP%\*

%TMP%\*

%USERPROFILE\*\index.dat

*.jdb.dir

*.jdb.pag

*.jdbinc.dir

*.jdbinc.pag

*:\pagefile.sys

*:\*.crmlog

*:\hiberfil.sys

*:\RECYCLED\*

*:\RECYCLER\*

%SystemRoot%\csc\*

%SystemRoot%\System32\DTCLog\MSDTC.LOG

%SystemRoot%\netlogon.chg

%SystemRoot%\schedlgu.txt

%SystemRoot%\registration\*.clb

%WINDIR%\debug\*

%SystemDrive%\Documents and Settings\NetShowServices\ntuser.dat

%SystemDrive%\Documents and Settings\NetShowServices\Local
Settings\Application Data\Microsoft\Windows\UsrClass.dat

%USERPROFILE%\ntuser.dat

%USERPROFILE%\Local Settings\Application
Data\Microsoft\Windows\UsrClass.dat

;

[JournaledFileSystemSettings]

JournaledFileSystems=L:

JournalDBSize=0x

DeferFsMonStart=1

DeferRetryInterval=120

DirNotifyBufferSize=0x1000

logFsErrors=0

NotifyBufferSize=0x1

NotifyFilter=0x0117

PreserveDBOnExit=1

;

;

[JournaledFileSystemSettings.L:\]

JournalDir=L:\TSM



Has anyone seen these errors before?



Thanks in advance,

Rainer





RHo-Consulting

Rainer Holzinger

Bachstr. 10

D-93105 Tegernheim

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: ANS1575E Journal Daemon Communications Error.

[Rainer Holzinger]

Hello Howard,

thanks for your recommendation. I had no issues so far with other TSM
clients not using the JBB method.
However, I will follow your suggestion with this particular server and
'downgrade' to version 6.2.2.0.

Thanks again and best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of Howard Coles
 Sent: Tuesday, April 26, 2011 3:29 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] ANS1575E Journal Daemon Communications Error.

 Rainer, I don't think the 6.2.3 client for windows if fit for
 production
 use.  I would go back to 6.2.2.  It has shown all kinds of weirdness
 for
 me.  If you run a scheduled command using c:\progra~1\tivoli\tsm
 it'll
 change it to C:\progra\~1\tivoli\tsm, and it didn't help on the vmdk
 backup situation either.  So, I'd say try the 6.2.2, and see if it
 performs like you expect, and stick with that until they come out with
 6.2.4 or 6.3.  :D


 See Ya'
 Howard Coles Jr., RHCE, CNE, CDE
 John 3:16!

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of
 Rainer Holzinger
 Sent: Tuesday, April 26, 2011 6:32 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] ANS1575E Journal Daemon Communications Error.

 Hi all,



 I'm having a TSM Windows client which has errors using the JBB method.



 Windows: 2003 SP2 (32-bit)

 TSM client:   6.2.3.0



 The backups have been working for about 3 weeks without any problems.
 Now the following messages appear in TSM client error log when the TSM
 Journal service is being started:

 04/26/2011 14:15:41 ANS0361I DIAG: jnlPing(): Invalid ping response:
 verb=0x0a, length=5.

 04/26/2011 14:15:41 ANS0361I DIAG: jnlRead(): Ping failed, Journal
 Daemon not responding.

 04/26/2011 14:15:41 ANS0361I DIAG: JnlQueryResponseThread(tid 4600):
 Error Reading query response, jnlRead(): rc=-1.

 04/26/2011 14:15:41 ANS0361I DIAG: BaJournaled(): jnlNextQueryResp():
 returned journal read error.

 04/26/2011 14:15:41 ANS1575E Journal Daemon Communications Error.



 These messages are in 'jbberror' log:

 04/26/2011 14:25:15 NpWrite(): Connection has been closed.

 04/26/2011 14:25:15 sendClientResponse(): error sending response -
 client severed pipe connection.

 04/26/2011 14:25:15 processJournalQuery(): Error sending Query Results
 Query response.



 'tsmjbbd.ini' looks like:

 ; Journal Service configuration for FORCLUSTER-MAPS on disk L:

 :

 [JournalSettings]

 Nlsrepos=dscameng.txt

 Errorlog=jbberror.forcluster-maps.log

 JournalDir=L:\TSM

 JournalPipe=\\.\pipe\forcluster-maps

 ;

 [JournalExcludeList]

 %SystemRoot%\System32\Config\*

 %SystemDrive%\Adsm.Sys\*

 %TEMP%\*

 %TMP%\*

 %USERPROFILE\*\index.dat

 *.jdb.dir

 *.jdb.pag

 *.jdbinc.dir

 *.jdbinc.pag

 *:\pagefile.sys

 *:\*.crmlog

 *:\hiberfil.sys

 *:\RECYCLED\*

 *:\RECYCLER\*

 %SystemRoot%\csc\*

 %SystemRoot%\System32\DTCLog\MSDTC.LOG

 %SystemRoot%\netlogon.chg

 %SystemRoot%\schedlgu.txt

 %SystemRoot%\registration\*.clb

 %WINDIR%\debug\*

 %SystemDrive%\Documents and Settings\NetShowServices\ntuser.dat

 %SystemDrive%\Documents and Settings\NetShowServices\Local
 Settings\Application Data\Microsoft\Windows\UsrClass.dat

 %USERPROFILE%\ntuser.dat

 %USERPROFILE%\Local Settings\Application
 Data\Microsoft\Windows\UsrClass.dat

 ;

 [JournaledFileSystemSettings]

 JournaledFileSystems=L:

 JournalDBSize=0x

 DeferFsMonStart=1

 DeferRetryInterval=120

 DirNotifyBufferSize=0x1000

 logFsErrors=0

 NotifyBufferSize=0x1

 NotifyFilter=0x0117

 PreserveDBOnExit=1

 ;

 ;

 [JournaledFileSystemSettings.L:\]

 JournalDir=L:\TSM



 Has anyone seen these errors before?



 Thanks in advance,

 Rainer



 

 RHo-Consulting

 Rainer Holzinger

 Bachstr. 10

 D-93105 Tegernheim

 phone:   +49 9403 969174

 mobile:  +49 162 2807 888

 email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



 CONFIDENTIALITY NOTICE:

 This e-mail is confidential and may also be privileged. If you are not
 the intended recipient, please notify the sender IMMEDIATELY; you
 should
 not copy the e-mail or use it for any purpose or disclose its contents
 to any other person.



 VIRUSES:

 Although there have been taken steps to ensure that this e-mail and
 attachments are free from any viruses, the recipient should at its
 sole
 discretion take the necessary measures to ensure that the received
 messages are actually virus free.

Re: Ang: TSM for DB password expiration

[Rainer Holzinger]

Hi,

since TDP for Oracle version 5.5.1 on Unix systems
'passsordaccess=generate' may be used. The TSM API is then taking care
about password issues.

best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of Howard Coles
 Sent: Friday, March 25, 2011 5:11 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] Ang: TSM for DB password expiration
 
 No, it's not different, Oracle TDP works the same on Linux and AIX.
 The only TDP I'm not sure of is the Windows version, but if I remember
 correctly it doesn't reset the password either.
 
 
 See Ya'
 Howard Coles Jr., RHCE, CNE, CDE
 John 3:16!
 
 
 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of David E Ehresman
 Sent: Friday, March 25, 2011 10:34 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] Ang: TSM for DB password expiration
 
 And is Oracle TDP on Linux different than on AIX?  Does password
 generate on linux?
 
 David
 
  Howard Coles howard.co...@ardenthealth.com 3/25/2011 11:21 AM
 
 For the Oracle TDP on AIX you have to set the passwordaccess option to
 prompt, as the TDP will NOT update the password.  The best option here
 is to set the password expiration to 0 on both the node, and the admin
 owner (if you have it) of the node.
 
 However, what Daniel said is correct unless you run update node
 server-oracle passexp=0 AND update admin server-oracle passexp=0,
 then it will just keep on using the same password.
 
 
 See Ya'
 Howard Coles Jr., RHCE, CNE, CDE
 John 3:16!
 
 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of Daniel Sparrman
 Sent: Friday, March 25, 2011 8:52 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] Ang: TSM for DB password expiration
 
 Hi David
 
 Correct me if I'm wrong, but when the nodes password has expired,
 passwordaccess generate will not set a new password for the client.
 You'll have to set a new password for the node, and then use tdpoconf
 to update the stored password on the client machine.
 
 Best Regards
 
 Daniel Sparrman
 -ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU skrev: -
 
 Till: ADSM-L@VM.MARIST.EDU
 Från: David E Ehresman deehr...@louisville.edu
 Sänt av: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
 Datum: 03/25/2011 15:41
 Ärende: TSM for DB password expiration
 
 Has anyone had problems with TSM for DB (Oracle), aka TDPO, and
 password
 expiration?
 
 We are running TSM for DB v5.5.1.0 with TSM api 6.2.2.0 on AIX 5.3 to
 a
 TSM server at 6.2.2.0 also on AIX 5.3. We are running with password
 generate.  Last night we got two ANR0425W password has expired
 messages
 for node DBFINTEST. I assume I got two messages because the rman
 command
 is using two channels, thus two concurrent TSM sessions.  At that
 point
 the password should have been set to something new and life should go
 on.  Instead, subsequent sessions for that node got the ANS0282E
 Password file is not available., ie password is incorrect, message.
 
 Any thoughts on what might be going wrong?
 
 David Ehresman

TDP for Oracle version 6.x

[Rainer Holzinger]

Hi all,



I'm looking for a TDP for Oracle (AIX, HPUX, Linux, Windows) version
higher than the 5.5.2.

I have checked IBM's ftp site as well as the Passport Advantage but
there seems to be nothing.

Are you aware of a TDPO version 6.x ?



Thank you and best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Bachstr. 10

D-93105 Tegernheim

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Windows server 2008 R2 - DR tests

[Rainer Holzinger]

Hi,



I'm about to perform a complete DR test with a Windows 2008 R2 cluster
running a MSSQL server 2008 R2.

On this MS cluster TSM B/A client version 6.2.2.0 and TDP for MSSQL
version 5.5.5,0 is installed, configured and working well.



First scenario is to destroy one cluster node and try to get it back to
the cluster. Therefore I have checked a couple of things and found
something which I'm not sure how it's working. In this Win2008 R2
cluster here is the cluster software and configuration stored under
C:\WNDOWS\CLUSTER.

There are subdirectories and files below C:\WINDOWS\CLUSTER. For those I
have now checked their availability for restore with the TSM B/A
client's restore function and was surprised. On file system level there
are directories 'C:\WINDOWS\CLUSTER\en' and 'C:\WINDOWS\CLUSTER\en-US'
and files in both subdirectories, but the TSM B/A client only displays
the directories, no files are being displayed for restore. IN
'C:\WINDOWS\CLUSTER\Reports' all is fine, I can see in the restore
window the same as on file system level. The same is on
'C:\WINDOWS\CLUSTER', where most of the files cannot be seen in the
restore window. Common to all 'missed' files under 'C:\WINDOWS\CLUSTER_
is that those are DLL's.

I guess that all the files I'm missing form 'C:\WINDOWS\CLUSTER' are
part of the system state backup, but how can I verify that? And what
decides that some dll's are part of the file system backup and others
are part of the system state backup?



Any information that helps 'to see daylight' is welcome.



Best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Bachstr. 10

D-93105 Tegernheim

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: TSM for Windows (2008 R2) client 6.2.2.0 and ForeFront 2010 upd.2

[Rainer Holzinger]

Hi David,

finally we have got managed to define a rule in MS ForeFront which
allows incoming and outgoing traffic from ports 1590 and 1591 which have
been defined within the TSM client configuration using the 'webports'
option as you recommended. After a TSM CAD process restart all is
working now perfect.

Thanks a log for the good hint how to solve this issue.
Best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of David E Ehresman
 Sent: Friday, February 11, 2011 4:01 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] TSM for Windows (2008 R2) client 6.2.2.0 and
 ForeFront 2010 upd.2

 This is a classic description of a firewall blocking tsm from reaching
 the client cad.  Unless you have a webports statement in you client
 options (dsm.opt for windows), dsmcad uses a random port.  So in a
 firewalled world, you have to use webports to specify the port and
 then
 allow that port in your firewall.  dsmwebcl.log on the client shows
 you
 at dsmcad startup time which port it is using.

 David Ehresman

  Rainer Holzinger rainerholzin...@gmx.de 2/11/2011 9:05 AM 
 Hello all,



 I'm having 3 new Windwos 2008 R2 (64-bit) servers with TSM for Windows
 cleitn version 6.2.2.0 installed.

 The TSM clients are within a DMZ as well as the TSM servers. TSM
 client
 acceptor daemon is implemented to manage the TSM cleitn scheduler as
 well as the WEB client. On all three machines there is MS ForeFront
 2010
 upgrade 2 installed which is a MS firewall, most likely replaceing the
 formerly ISA product from Microsoft.

 All three TSM clients are configured with 'schedule mode = prompted'.
 For some unkonwn reason the TSM server is not prompting the TSM
 clients
 to start the backlup operations. However, when I'm restarting the TSM
 CAD service the backup begins, but just this one. Later scheduled
 backups do not start again as before. So it looks like only the TSM
 client is able to start a session with the TSM server. We have applied
 some 'inbound rules' aleady to the MS ForeFront configuration to allow
 all traffic for the backup network, tcpip ports 1500-1599 and the
 whole
 backup network as well without any success. We have also de-installed
 the MS ForeFront software again to see is this is really causing the
 problem. Without MS ForeFront, no problem.

 Is there anybody out there, using this or a similar environemt who had
 experienced the same problems or better is abel to provide a solution
 or
 further debigging hints?



 Thanks in advance and have nice weekend,

 Rainer





 RHo-Consulting

 Rainer Holzinger

 Bachstr. 10

 D-93105 Tegernheim

 phone:   +49 9403 969174

 mobile:  +49 162 2807 888

 email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



 CONFIDENTIALITY NOTICE:

 This e-mail is confidential and may also be privileged. If you are not
 the intended recipient, please notify the sender IMMEDIATELY; you
 should
 not copy the e-mail or use it for any purpose or disclose its contents
 to any other person.



 VIRUSES:

 Although there have been taken steps to ensure that this e-mail and
 attachments are free from any viruses, the recipient should at its
 sole
 discretion take the necessary measures to ensure that the received
 messages are actually virus free.

TSM for Windows (2008 R2) client 6.2.2.0 and ForeFront 2010 upd.2

[Rainer Holzinger]

Hello all,



I'm having 3 new Windwos 2008 R2 (64-bit) servers with TSM for Windows
cleitn version 6.2.2.0 installed.

The TSM clients are within a DMZ as well as the TSM servers. TSM client
acceptor daemon is implemented to manage the TSM cleitn scheduler as
well as the WEB client. On all three machines there is MS ForeFront 2010
upgrade 2 installed which is a MS firewall, most likely replaceing the
formerly ISA product from Microsoft.

All three TSM clients are configured with 'schedule mode = prompted'.
For some unkonwn reason the TSM server is not prompting the TSM clients
to start the backlup operations. However, when I'm restarting the TSM
CAD service the backup begins, but just this one. Later scheduled
backups do not start again as before. So it looks like only the TSM
client is able to start a session with the TSM server. We have applied
some 'inbound rules' aleady to the MS ForeFront configuration to allow
all traffic for the backup network, tcpip ports 1500-1599 and the whole
backup network as well without any success. We have also de-installed
the MS ForeFront software again to see is this is really causing the
problem. Without MS ForeFront, no problem.

Is there anybody out there, using this or a similar environemt who had
experienced the same problems or better is abel to provide a solution or
further debigging hints?



Thanks in advance and have nice weekend,

Rainer





RHo-Consulting

Rainer Holzinger

Bachstr. 10

D-93105 Tegernheim

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: TSM for Windows (2008 R2) client 6.2.2.0 and ForeFront 2010 upd.2

[Rainer Holzinger]

Hi Andy,

thanks for this hint, I have tried this already.
It looks like the MS ForeFront doesn't care about definitions that have
been made in normal 'Windows 2008 Firewall with Advanced Security'.

Best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of Huebner,Andy,FORT WORTH,IT
 Sent: Friday, February 11, 2011 4:42 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] TSM for Windows (2008 R2) client 6.2.2.0 and
 ForeFront 2010 upd.2

 If you look at your firewall logs you will see that the see the
 connection from the TSM server is being dropped.  Be sure to add the
 CAD to the firewall.  We had this problem when we first started
 backing up 2008 servers.

 ** use at your own risk **
 This is useful for punching holes in the MS firewall on 2008:
 netsh advfirewall firewall add rule name=IBM Tivoli Storage Manager
 CAD dir=in program=C:\program files\tivoli\tsm\baclient\dsmcad.exe
 action=allow

 Andy Huebner

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of Rainer Holzinger
 Sent: Friday, February 11, 2011 8:06 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] TSM for Windows (2008 R2) client 6.2.2.0 and
 ForeFront 2010 upd.2

 Hello all,



 I'm having 3 new Windwos 2008 R2 (64-bit) servers with TSM for Windows
 cleitn version 6.2.2.0 installed.

 The TSM clients are within a DMZ as well as the TSM servers. TSM
 client
 acceptor daemon is implemented to manage the TSM cleitn scheduler as
 well as the WEB client. On all three machines there is MS ForeFront
 2010
 upgrade 2 installed which is a MS firewall, most likely replaceing the
 formerly ISA product from Microsoft.

 All three TSM clients are configured with 'schedule mode = prompted'.
 For some unkonwn reason the TSM server is not prompting the TSM
 clients
 to start the backlup operations. However, when I'm restarting the TSM
 CAD service the backup begins, but just this one. Later scheduled
 backups do not start again as before. So it looks like only the TSM
 client is able to start a session with the TSM server. We have applied
 some 'inbound rules' aleady to the MS ForeFront configuration to allow
 all traffic for the backup network, tcpip ports 1500-1599 and the
 whole
 backup network as well without any success. We have also de-installed
 the MS ForeFront software again to see is this is really causing the
 problem. Without MS ForeFront, no problem.

 Is there anybody out there, using this or a similar environemt who had
 experienced the same problems or better is abel to provide a solution
 or
 further debigging hints?



 Thanks in advance and have nice weekend,

 Rainer





 RHo-Consulting

 Rainer Holzinger

 Bachstr. 10

 D-93105 Tegernheim

 phone:   +49 9403 969174

 mobile:  +49 162 2807 888

 email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



 CONFIDENTIALITY NOTICE:

 This e-mail is confidential and may also be privileged. If you are not
 the intended recipient, please notify the sender IMMEDIATELY; you
 should
 not copy the e-mail or use it for any purpose or disclose its contents
 to any other person.



 VIRUSES:

 Although there have been taken steps to ensure that this e-mail and
 attachments are free from any viruses, the recipient should at its
 sole
 discretion take the necessary measures to ensure that the received
 messages are actually virus free.

 This e-mail (including any attachments) is confidential and may be
 legally privileged. If you are not an intended recipient or an
 authorized representative of an intended recipient, you are prohibited
 from using, copying or distributing the information in this e-mail or
 its attachments. If you have received this e-mail in error, please
 notify the sender immediately by return e-mail and delete all copies
 of this message and any attachments.

 Thank you.

Re: Volume unavailable.

[Rainer Holzinger]

Hi Alex,

did you check your TSM server's activity log for responses/error
messages related to the 'upd vol' and 'checkin' commands you gave? There
might be more useful information to find.

best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
 Of Alex Amtrup Sørensen
 Sent: Wednesday, January 26, 2011 8:24 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] Volume unavailable.
 
 Hi
 
 Great forum, some very good answers. I learn a lot.
 
 I have a volume, the volume is unavailable:
 
 08:11:05   TSMSRV01 : q vol * acc=unavail
 
 Volume Name Storage  Device
 EstimatedPct   Volume
   Pool Name
 Class Name   Capacity   Util   Status
   ---  --  -  -  -
 ---
 P00341L3   OFFSITE
 IBM3584_D-409.6 G   52.1  Filling
 
 
 I have tried:
 
 Update vol P00341L3 access=readw . But the volume is unavailable in
 again after after a while.
 
 Also checked the volume into library, library checked the volume
 correctly out straightaway.
 
  Volume Name: P00341L3
  Storage Pool Name: OFFSITE
  Device Class Name: IBM3584_DEV
 Estimated Capacity: 409.6 G
Scaled Capacity Applied:
   Pct Util: 52.1
  Volume Status: Filling
 Access: Unavailable
 Pct. Reclaimable Space: 0.0
Scratch Volume?: Yes
In Error State?: No
   Number of Writable Sides: 1
Number of Times Mounted: 6
  Write Pass Number: 1
  Approx. Date Last Written: 01/12/2011 12:12:11
 Approx. Date Last Read: 01/12/2011 05:49:09
Date Became Pending:
 Number of Write Errors: 0
  Number of Read Errors: 0
Volume Location:
 Volume is MVS Lanfree Capable : No
 Last Update by (administrator): BATCH
  Last Update Date/Time: 01/25/2011 21:03:44
   Begin Reclaim Period:
 End Reclaim Period:
   Drive Encryption Key Manager: None
 
 What can I do??
 
 Alex Sørensen
 Server administrator

Re: JBB tools for Windows client vers, 6.x

[Rainer Holzinger]

Hi Grigori,

thanks for your reply.
However, actually it was my intention to ask about the JBB tools, like
'filemon', 'qfilter'. 'volinfo' and 'dbviewb'. I'm having those tools
available (downloaded from IBM's ftp site) for TSM version 5.4.
Unfortunately I haven't found any JBB tools anymore on IBM's ftp
download site.
Any idea where I could find the JBB tools for TSM for Windows clients
version 5.5 and 6.2?

Thanks and bets regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of Grigori Solonovitch
 Sent: Sunday, January 09, 2011 5:55 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] JBB tools for Windows client vers, 6.x

 For AIX - tivoli.tsm.client.jbb.64bit 6.2.X.X, but we are not using
 it.
 For Windows - we are using it in TSM Client 6.2.2.0 without any
 problems.

 Grigori G. Solonovitch

 Senior Technical Architect

 Information Technology  Ahli United Bank Kuwait
 http://www.ahliunited.com.kw

 Phone: (+965) 2231-2274  Mobile: (+965) 99798073  E-Mail:
 grigori.solonovi...@ahliunited.com

 Please consider the environment before printing this Email


 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of Rainer Holzinger
 Sent: Saturday, January 08, 2011 10:50 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] JBB tools for Windows client vers, 6.x

 Hi all,



 are there still JBB tools available to download for TSM version 6.x
 Windows client?



 Thanks and best regards,

 Rainer



 

 RHo-Consulting

 Rainer Holzinger

 Bachstr. 10

 D-93105 Tegernheim

 phone:   +49 9403 969174

 mobile:  +49 162 2807 888

 email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



 CONFIDENTIALITY NOTICE:

 This e-mail is confidential and may also be privileged. If you are not
 the intended recipient, please notify the sender IMMEDIATELY; you
 should
 not copy the e-mail or use it for any purpose or disclose its contents
 to any other person.



 VIRUSES:

 Although there have been taken steps to ensure that this e-mail and
 attachments are free from any viruses, the recipient should at its
 sole
 discretion take the necessary measures to ensure that the received
 messages are actually virus free.

 Please consider the environment before printing this Email.

 CONFIDENTIALITY AND WAIVER: The information contained in this
 electronic mail message and any attachments hereto may be legally
 privileged and confidential. The information is intended only for the
 recipient(s) named in this message. If you are not the intended
 recipient you are notified that any use, disclosure, copying or
 distribution is prohibited. If you have received this in error please
 contact the sender and delete this message and any attachments from
 your computer system. We do not guarantee that this message or any
 attachment to it is secure or free from errors, computer viruses or
 other conditions that may damage or interfere with data, hardware or
 software.

JBB tools for Windows client vers, 6.x

[Rainer Holzinger]

Hi all,



are there still JBB tools available to download for TSM version 6.x
Windows client?



Thanks and best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Bachstr. 10

D-93105 Tegernheim

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Windows server 2008 cluster db backup

[Rainer Holzinger]

Hi all,



I'm running a MX cluster on two Windows 2008 R2 Enterprise servers.

TSM B/A client 5.5.2.12 is installed on both.

How do I backup the MS clusterdb?



Thanks and best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Bachstr. 10

D-93105 Tegernheim

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: ISC - most curretn version ?

[Rainer Holzinger]

Hi,

is it possible to run Administration Center 5.5. and 6.2 concurrently on
the same Windows server?

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of Shu Hui Nie
 Sent: Friday, May 21, 2010 2:43 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] ISC - most curretn version ?

 TIP is used for Admin Center 6.2. To upgrade Administration Center
 from
 5.5 to 6.2, you can download/install the 6.2 Admin Center directly and
 TIP
 will be installed together with Admin Center.

 Selina

Re: Windows server 2008 cluster db backup

[Rainer Holzinger]

Hello Rick,

very welcome and very useful information.
I found the 'Cluster Database' as a 256 KB object in 'SystemState' as
you said.
However, there's a quorum disk as well with some '*hive*' files.
According to our Windows admin, these don't need to be backed up.

Thanks again and best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of Rick Adamson
 Sent: Wednesday, October 27, 2010 3:28 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] Windows server 2008 cluster db backup

 In 2008 the cluster config and cluster db are backed up via VSS, as a
 part of the systemstate. We are just now moving to 2008 so I haven't
 done any testing with it yet to see how/if TSM has a recommended
 solution. However, seeing that it is part of the SS you should be able
 to test it by running a backup and then either querying the components
 of the system state (or use the GUI) to see if it is present.

 On another note:
 Many opinions are that in most cases there is little need to restore
 the
 clusterdb from backup since 2008 clusters use the Majority Node Set
 model. This means that instead of the cluster config  db being on a
 quorum drive each node of the cluster has its own copy locally, as
 well
 as backup copies stored with a tmp file extension. When a node is
 recovered or rebuilt and re-joined into the cluster the surviving
 nodes
 provide the new node a copy of the current database (following the
 process in links below).

 Simply stated a copy of the db (and tmp backups) are located locally
 on every node of the cluster.

 This may help:

 http://blogs.msdn.com/b/clustering/archive/2008/01/20/7176982.aspx


 http://support.microsoft.com/kb/224999

 Hope this helps you out...
 ~Rick

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of
 Rainer Holzinger
 Sent: Wednesday, October 27, 2010 3:19 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] Windows server 2008 cluster db backup

 Hi all,



 I'm running a MX cluster on two Windows 2008 R2 Enterprise servers.

 TSM B/A client 5.5.2.12 is installed on both.

 How do I backup the MS clusterdb?



 Thanks and best regards,

 Rainer



 

 RHo-Consulting

 Rainer Holzinger

 Bachstr. 10

 D-93105 Tegernheim

 phone:   +49 9403 969174

 mobile:  +49 162 2807 888

 email: mailto:rainerholzin...@gmx.de rainerholzin...@gmx.de



 CONFIDENTIALITY NOTICE:

 This e-mail is confidential and may also be privileged. If you are not
 the intended recipient, please notify the sender IMMEDIATELY; you
 should
 not copy the e-mail or use it for any purpose or disclose its contents
 to any other person.



 VIRUSES:

 Although there have been taken steps to ensure that this e-mail and
 attachments are free from any viruses, the recipient should at its
 sole
 discretion take the necessary measures to ensure that the received
 messages are actually virus free.

Re: Running TDP full db backup and TDP Log backup

[Rainer Holzinger]

Hi Jody,

is you define another, additional client scheduler (or CAD) you are able
to run db and TxL backups at the same time.

Best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of Jody WP
 Sent: Wednesday, June 09, 2010 3:13 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] Running TDP full db backup and TDP Log backup

 The reason why i want to run it at the same time is due to the t-log
 filling up and running out of disk space while the full backup is
 running

 +-
 -
 |This was sent by jody...@gmail.com via Backup Central.
 |Forward SPAM to ab...@backupcentral.com.
 +-
 -

test

[Rainer Holzinger]

test

ISC - most curretn version ?

[Rainer Holzinger]

Hi,



is there a higher version of ISXC than 6.0.1 and from where can I
download this version.

I'm about to upgrade the Administration Center from version 5.5.0.0
(under Win2003 SP3) to version 6.2 and would like to upgrade the ISC as
well.



Thank you and best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainer.holzin...@t-online.de
rainer.holzin...@t-online.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: ISC - most current version ?

[Rainer Holzinger]

Hi Selina,

great, thank you for your information.

Best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of Shu Hui Nie
 Sent: Friday, May 21, 2010 2:43 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] ISC - most curretn version ?

 TIP is used for Admin Center 6.2. To upgrade Administration Center
 from
 5.5 to 6.2, you can download/install the 6.2 Admin Center directly and
 TIP
 will be installed together with Admin Center.

 Selina

Re: Administration Center 6.1.3.0 and 6.2.0.0

[Rainer Holzinger]

Hi Carol,

thanks for your information which was helpful.
So upgrading the TSM server at level 5.3.6.0 is the first and mandatory
step.

Thanks and best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of Carol Trible
 Sent: Wednesday, April 28, 2010 11:14 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] Adminsitration Center 6.1.3.0 and 6.2.0.0

 The TSM Administration Center versions 6.1 and 6.2 can connect to
 version
 5.4, 5.5 and 6.1 TSM servers.  The TSM Administration Center version
 6.2
 can also connect to version 6.2 TSM servers.

 The TSM Administration Center version 5.5 and 5.4 can connect to a 5.3
 TSM
 Server, but the 5.3 server is no longer supported.

 Carol Trible
  IBM Tivoli Storage Manager Development
  tri...@us.ibm.com



 Hi all,



 from where can I check what TSM server versions the TSM Administration
 Center versions 6.1.3.0 and 6.2.0.0 are supporting?

 I'm having TSM servers 5.3.6.0 and 5.5.3.0 running on AIX 5.3 and RHEL
 5.



 Thank you ands best regards,

 Rainer



 

 RHo-Consulting

 Rainer Holzinger

 Alter Bahnhof 13

 D-93093 Donaustauf

 phone:   +49 9403 969174

 mobile:  +49 162 2807 888

 email: mailto:rainer.holzin...@t-online.de
 rainer.holzin...@t-online.de



 CONFIDENTIALITY NOTICE:

 This e-mail is confidential and may also be privileged. If you are not
 the intended recipient, please notify the sender IMMEDIATELY; you
 should
 not copy the e-mail or use it for any purpose or disclose its contents
 to any other person.



 VIRUSES:

 Although there have been taken steps to ensure that this e-mail and
 attachments are free from any viruses, the recipient should at its
 sole
 discretion take the necessary measures to ensure that the received
 messages are actually virus free.

Adminsitration Center 6.1.3.0 and 6.2.0.0

[Rainer Holzinger]

Hi all,



from where can I check what TSM server versions the TSM Administration
Center versions 6.1.3.0 and 6.2.0.0 are supporting?

I'm having TSM servers 5.3.6.0 and 5.5.3.0 running on AIX 5.3 and RHEL
5.



Thank you ands best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainer.holzin...@t-online.de
rainer.holzin...@t-online.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

TSM Windows client 5.5.2.0 scheduling problem

[Rainer Holzinger]

Hi,



I have recently installed two new TSM servers, version 5.5.2.0 on RHEL 5
on a clustered base.

Now I have experienced a scheduling problem with two TSM Windows
(Win2003/SP2) clients version 5.5.2.0 (32bit).

In both TSM for Windows clients the CAD service is installed and
customized to manage 'webclient' and 'scheduler'.

There are backup schedules defined on the TSM server to backup the
clients every day on an incremental base.

The automatic scheduling has been working with the first backup and
every scheduled backup after that initial one has been a 'missed'
backup, even if the TSM CAD service is started on the TSM for Windows
client.

Some trouble shooting brought up, that a new schedule is processed only
if the TSM CAD service is being restarted. Then one backup is being
processed and the next scheduled one doesn't start again before the TSM
CAD service is being restarted again.



Any idea what could cause this strange behaviour? There are about 70
other TSM for Windows clients, all on version 5.5.2.0, which are doing
well. On the two failing TSM clients there is MS ISA installed. Could
this cause the problem and if so WHY?



Thank you and best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainer.holzin...@t-online.de
rainer.holzin...@t-online.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

TSM-OR 5.5.1.0 - 'Error -- Server Information'

[Rainer Holzinger]

Hi all,



TSM-OR 5.5.1.0 on Windows Server 2003 Standard Edition SP1

TSM server 5.5.2.0 on RedHat Enterprise Linux version 5.2



I have installed two new TSM servers, version 5.5.2.0 on RedHat
Enterprise Linux version 5.2 and implemented both into TSM-OR version
5.5.1.0 on a Windows Server 2003 Standard Edition SP1.



TSM-OR standard daily reports for one of the new servers is fine.

For the second one there is a TSM-OR daily report being returned with
error message 'Error - Server Information'.

I have checked the implementation more than once to find any differences
between both new TSM servers. Unfortunately I haven't found any
differences.



Did somebody of you run into the same problem and if so, how did you
solve it?



Thank you for any feedback.

Best regards,

Rainer



RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainer.holzin...@t-online.de
rainer.holzin...@t-online.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: DB2 - HADR and TSM

[Rainer Holzinger]

Hi Kurt,

good point.
I will try to get familiar with this and proceed as you recommended.

Best regards,
Rainer


 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of BEYERS Kurt
 Sent: Tuesday, April 28, 2009 8:51 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] DB2 - HADR and TSM

 Just use a small script that checks wether the database is in primary
 mode on the node and launch just then the online backup towards TSM.

 Then the script can be scheduled on both the primary and standby
 database server and you've got yourself always a backup independent
 whether a failover was initiated or not.

 Regards,
 Kurt

 -Oorspronkelijk bericht-
 Van: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] Namens
 Jacques Van Den Berg
 Verzonden: maandag 27 april 2009 20:56
 Aan: ADSM-L@VM.MARIST.EDU
 Onderwerp: Re: [ADSM-L] DB2 - HADR and TSM

 Hi Rainer,

 We use HADR in our SAP environment. I tread both nodes as separate TSM
 clients. Both nodes have its own node names. You can only backup the
 primary node of course. When we do failover we point all our SAP
 clients
 to the secondary system. I then run a scheduled backup on the
 secondary
 node.

 Hope this helps.

 Kind Regards,

 Jacques van den Berg
 TSM / Storage / SAP Basis Administrator
 Pick 'n Pay IT
 Email   : jvandenb...@pnp.co.za
 Tel  : +2721 - 658 1711
 Fax : +2721 - 658 1676
 Mobile  : +2782 - 653 8164

 Dis altyd lente in die hart van die mens wat God
 en sy medemens liefhet (John Vianney).


 -Original Message-
 From: rainer_holzin...@web.de [mailto:rainer_holzin...@web.de]
 Sent: 27 April 2009 08:27 PM
 To: Jacques Van Den Berg
 Cc: 'ADSM: Dist Stor Manager'
 Subject: RE: [ADSM-L] DB2 - HADR and TSM

 Hello Jacques,

 I was more asking about the ongoing backup procedures if your primary
 HADR nodes goes down for some reason and the DB2 database(s) is/are
 continued on your standby HADR node. How do you 'failover/failback'
 your
 DB2 backup clients in these situations?
 DB2 HADR looks like some Software cluster and backup procedures are
 therefore a bit more 'tricky' to implement as this is in HACMP or MSCS
 clusters.
 Did you manage this somehow?

 Best regards,
 Rainer

  -Original Message-
  From: jvandenb...@pnp.co.za [mailto:jvandenb...@pnp.co.za]
  Sent: Monday, April 27, 2009 4:45 PM
  To: rainer_holzin...@web.de; ADSM-L@VM.MARIST.EDU
  Subject: RE: [ADSM-L] DB2 - HADR and TSM
 
 
  Hi Rainer,
 
  We backup the primary database as per normal with the db2 command to
  TSM. We do a full online backup everyday and archive logs to TSM as
  well. Nothing special.
 
  Kind Regards,
 
  Jacques van den Berg
  TSM / Storage / SAP Basis Administrator
  Pick 'n Pay IT
  Email   : jvandenb...@pnp.co.za
  Tel  : +2721 - 658 1711
  Fax : +2721 - 658 1676
  Mobile  : +2782 - 653 8164
 
  Dis altyd lente in die hart van die mens wat God
  en sy medemens liefhet (John Vianney).
 
  -Original Message-
  From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On
 Behalf
  Of
  Rainer Holzinger
  Sent: 27 April 2009 03:33 PM
  To: ADSM-L@VM.MARIST.EDU
  Subject: [ADSM-L] DB2 - HADR and TSM
 
  Hi all,
 
 
 
  is somebody having experience to backup DB2 HADR environments with
  TSM?
 
  Or is there some publication available about this scenario?
 
 
 
  Thank you and best regards,
 
  Rainer
 
 
 
  
 
  RHo-Consulting
 
  Rainer Holzinger
 
  Alter Bahnhof 13
 
  D-93093 Donaustauf
 
  phone:   +49 9403 969174
 
  mobile:  +49 162 2807 888
 
  email: mailto:rainer.holzin...@t-online.de
  rainer.holzin...@t-online.de
 
 
 
  CONFIDENTIALITY NOTICE:
 
  This e-mail is confidential and may also be privileged. If you are
 not
  the intended recipient, please notify the sender IMMEDIATELY; you
  should
  not copy the e-mail or use it for any purpose or disclose its
 contents
  to any other person.
 
 
 
  VIRUSES:
 
  Although there have been taken steps to ensure that this e-mail and
  attachments are free from any viruses, the recipient should at its
  sole
  discretion take the necessary measures to ensure that the received
  messages are actually virus free.
 
  Read our disclaimer at:
  http://www.picknpay.co.za/pnp/view/pnp/en/page5093?
  If you don't have web access, the disclaimer can be mailed to you on
  request.
  Disclaimer requests to be sent to it-secur...@pnp.co.za
 



 Read our disclaimer at:
 http://www.picknpay.co.za/pnp/view/pnp/en/page5093?
 If you don't have web access, the disclaimer can be mailed to you on
 request.
 Disclaimer requests to be sent to it-secur...@pnp.co.za

 *** Disclaimer ***

 Vlaamse Radio- en Televisieomroep
 Auguste Reyerslaan 52, 1043 Brussel

 nv van publiek recht
 BTW BE 0244.142.664
 RPR Brussel
 http://www.vrt.be/disclaimer

DB2 - HADR and TSM

[Rainer Holzinger]

Hi all,



is somebody having experience to backup DB2 HADR environments with TSM?

Or is there some publication available about this scenario?



Thank you and best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:rainer.holzin...@t-online.de
rainer.holzin...@t-online.de



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: DB2 - HADR and TSM

[Rainer Holzinger]

Hello Jacques,

I was more asking about the ongoing backup procedures if your primary
HADR nodes goes down for some reason and the DB2 database(s) is/are
continued on your standby HADR node. How do you 'failover/failback' your
DB2 backup clients in these situations?
DB2 HADR looks like some Software cluster and backup procedures are
therefore a bit more 'tricky' to implement as this is in HACMP or MSCS
clusters.
Did you manage this somehow?

Best regards,
Rainer

 -Original Message-
 From: jvandenb...@pnp.co.za [mailto:jvandenb...@pnp.co.za]
 Sent: Monday, April 27, 2009 4:45 PM
 To: rainer_holzin...@web.de; ADSM-L@VM.MARIST.EDU
 Subject: RE: [ADSM-L] DB2 - HADR and TSM


 Hi Rainer,

 We backup the primary database as per normal with the db2 command to
 TSM. We do a full online backup everyday and archive logs to TSM as
 well. Nothing special.

 Kind Regards,

 Jacques van den Berg
 TSM / Storage / SAP Basis Administrator
 Pick 'n Pay IT
 Email   : jvandenb...@pnp.co.za
 Tel  : +2721 - 658 1711
 Fax : +2721 - 658 1676
 Mobile  : +2782 - 653 8164

 Dis altyd lente in die hart van die mens wat God
 en sy medemens liefhet (John Vianney).

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
 Of
 Rainer Holzinger
 Sent: 27 April 2009 03:33 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] DB2 - HADR and TSM

 Hi all,



 is somebody having experience to backup DB2 HADR environments with
 TSM?

 Or is there some publication available about this scenario?



 Thank you and best regards,

 Rainer



 

 RHo-Consulting

 Rainer Holzinger

 Alter Bahnhof 13

 D-93093 Donaustauf

 phone:   +49 9403 969174

 mobile:  +49 162 2807 888

 email: mailto:rainer.holzin...@t-online.de
 rainer.holzin...@t-online.de



 CONFIDENTIALITY NOTICE:

 This e-mail is confidential and may also be privileged. If you are not
 the intended recipient, please notify the sender IMMEDIATELY; you
 should
 not copy the e-mail or use it for any purpose or disclose its contents
 to any other person.



 VIRUSES:

 Although there have been taken steps to ensure that this e-mail and
 attachments are free from any viruses, the recipient should at its
 sole
 discretion take the necessary measures to ensure that the received
 messages are actually virus free.

 Read our disclaimer at:
 http://www.picknpay.co.za/pnp/view/pnp/en/page5093?
 If you don't have web access, the disclaimer can be mailed to you on
 request.
 Disclaimer requests to be sent to it-secur...@pnp.co.za

files bound to management classes

[Rainer Holzinger]

Hi all,



I would like to do some cleanup tasks on our 6 TSM servers.

One step would be to remove 'old/unused' management classes and
'old/unused' storage pools.

Who can I easily find out is there are still backup/archive files bound
to particular management classes.

Our TSM serve databases are between 35 GB and 85 GB and select
statements are running very, very long or are timing out.

Is somebody outside having a working select statement for me?



Thank you and best regards,
Rainer





RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:[EMAIL PROTECTED]
[EMAIL PROTECTED]



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

TSM backing up an Oracle RAC

[Rainer Holzinger]

Hello all,



is somebody of you aware of a publication how to backup an Oracle RAC (
with Data Guard machine) using TSM and TDPO?



Thank you and best regards,

Rainer

Atape driver software for RedHat Enterprise Linux 5 (64bit)

[Rainer Holzinger]

Hi all,



we are about to install a clustered TSM server (both library clients)
environment on RedHat Enterprise Linux 5 (64 bit).



From where can I download the Atape driver software for the above
systems?



Thank you and best regards,

Rainer





RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:[EMAIL PROTECTED]
[EMAIL PROTECTED]



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

backing up MS ISA servers

[Rainer Holzinger]

Hi all,



how do you backup MS ISA (Internet Security and Acceleration) servers
with TSM?

There are as well as with MS SQL servers files with extensions *.mdf and
*.ldf.

Does TDP for MS SQL support these MS ISA servers?



Thanks for you help,

Rainer





RHo-Consulting

Rainer Holzinger

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:[EMAIL PROTECTED]
[EMAIL PROTECTED]



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: Shrinking scratch pools - tips?

[Rainer Holzinger]

Hi Milton,

one reason, 'old' TDPO/RMAN backups will not be expired anymore could be
that your Oracle DBA's are using a different RMAN recovery catalog now.
So every TDPO/RMAN backup which would be part of the 'old' RMAN recovery
catalog wouldn't be expired anymore.
Another reason could be that your Oracle databases are having a
different DBID now for some reason. This is most likely if an Oracle
database has been 'cloned' from another one.
I have noticed both situations a couple of times in our installation.

best regards,
Rainer


RHo-Consulting
Alter Bahnhof 13
D-93093 Donaustauf
phone:   +49 9403 969174
mobile:  +49 162 2807 888
email:[EMAIL PROTECTED]

CONFIDENTIALITY NOTICE:
This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.

VIRUSES:
Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Johnson, Milton [CCC-OT_IT]
 Sent: Wednesday, March 28, 2007 11:23 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] Shrinking scratch pools - tips?

  I frequently find the culprit to be Oracle backups made via TDP/RMAN
 (but it could be any backup made via TDP).  Something happens and they
 stop deleting old backups.  I look at likely candidates using:

 set sqldisplaymode wide
 select NODE_NAME,cast(BACKUP_DATE as date) as
 BACKUP_DATE,STATE,cast(DEACTIVATE_DATE as date) \
 as DEACTIVATE_DATE,HL_NAME,LL_NAME from BACKUPS where
 NODE_NAME='Client's Node Name' order by BACKUP_DATE

 If it shows old backups then I have the DBAs correct the problem and
 use
 tdposync to remove the old backups.

 Milton Johnson

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of
 Bell, Charles (Chip)
 Sent: Friday, March 23, 2007 9:41 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] Shrinking scratch pools - tips?

 Since this a GREAT place for info, etc., I though I would ask for
 tips/how-to's on tracking down why my scratch pools are dwindling, for
 LTO/LTO2/VTL. My guess is I have a couple of clients that are sending
 out a vast amount of data to primary/copy. But without a good
 reporting
 tool, how can I tell? Expiration/reclamation runs fine, and I am going
 to run a check against my Iron Mountain inventory to see if there is
 anything there that should be here. What else would you guys/gals look
 at?  :-)  Thanks in advance!



 God bless you!!!

 Chip Bell
 Network Engineer I
 IBM Tivoli Certified Deployment Professional Baptist Health System
 Birmingham, AL







 -
 Confidentiality Notice:
 The information contained in this email message is privileged and
 confidential information and intended only for the use of the
 individual
 or entity named in the address. If you are not the intended recipient,
 you are hereby notified that any dissemination, distribution, or
 copying
 of this information is strictly prohibited. If you received this
 information in error, please notify the sender and delete this
 information from your computer and retain no copies of any of this
 information.

PrivIncrFileSpace: Received rc=152 from fioGetDirEntries:

[Rainer Holzinger]

Thanks for the replies I've got about this problem.



The application itself hasn't been able to open the file. The user tried
to delete the file and the directory where the file is in without
success.

The problem has now been passed on to the Windows support team.



Thanks again and best regards,

Rainer

PrivIncrFileSpace: Received rc=152 from fioGetDirEntries:

[Rainer Holzinger]

Hello all,



on one of our TSM Windows clients we are having an erorr within the
clients error log like:



PrivIncrFileSpace: Received rc=152 from fioGetDirEntries:




for a particular file.



From the clients schedule log I have seen message:



ANS4047E There is a read error on '\\l00srv10\e$'. The file
is skipped.



What could be the reason for this error? File system corruption?



TSM Windows client version is 5.2.4.8 (32bit)

Windows system is Server 2000 SP4



Thanks for your input

regards,

Rainer

TSM-OR 5.3.3.0

[Rainer Holzinger]

Hello,



has anyone tried to implement TSM-OR 5.3.3.0 on a Windows cluster and
run it as a clustered application?

I haven't found any comments from IBM about this issue.



Thanks and best regards,

Rainer

msg ANR4502W - TSM server 5.3.4.4 on AIX

[Rainer Holzinger]

Hello all,



within our first TSM 5.3 server is running on level 5.3.3.4 under AIX.

ISC is at level 6.0.1 and AC is 5.3.3.0 on Windows.



Whenever there's a need to modify the volume history (STGNEW, STGDEL,
TSM server database backup) I'm receiving the TSM server warning
message.

ANR4502W - No files have been defined for automatically
storing sequential volume history information.



There is a volume history defined within the dsmserv.opt file with
option VOLUMEHISTORY. I can query the volume history from the
Administration Center. Also backing up the volume history with and admin
schedule is working well. However it is impossible to define a volume
history or device configuration file from within the Administration
Center.

Is anyone has noticed the same problem?



Thanks for your replies and best regards,

Rainer





RHo-Consulting

Alter Bahnhof 13

D-93093 Donaustauf

phone:   +49 9403 969174

mobile:  +49 162 2807 888

email: mailto:[EMAIL PROTECTED]
[EMAIL PROTECTED]



CONFIDENTIALITY NOTICE:

This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify the sender IMMEDIATELY; you should
not copy the e-mail or use it for any purpose or disclose its contents
to any other person.



VIRUSES:

Although there have been taken steps to ensure that this e-mail and
attachments are free from any viruses, the recipient should at its sole
discretion take the necessary measures to ensure that the received
messages are actually virus free.

Re: COMMTIMEOUT option

[Rainer Holzinger]

Hi Nicholas,

you can use 'SETOPT COMMTIMEOUT ' to change this value dynamically
without restarting the TSM server.
Also after you have used 'SETOPT COMMTIMEOUT ' ther should be a new
entry with the new COMMTIMEOUT value at the end of your dsmserv.opt
file.

Regards,
Rainer


RHo-Consulting
Alter Bahnhof 13
D-93093 Donaustauf
phone:   +49 9403 969174
mobile:  +49 162 2807 888
email:[EMAIL PROTECTED]


 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of RODOLFICH, NICHOLAS
 Sent: Thursday, October 19, 2006 9:33 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] COMMTIMEOUT option

 Does anyone know if COMMTIMEOUT is a dynamic variable? I would like to
 change it but I am not sure if I need to restart TSN for it to take
 effect.

 Thanks for your help!!

 Regards,

 Nicholas Rodolfich
 Systems Analyst
 POOLCORP
 Desk: (985)801-3038
 Cell:   (228)223-6777
 mailto:[EMAIL PROTECTED]






 This email and any files transmitted with it are confidential and
 intended solely for the use of the individual or entity to whom they
 are addressed. If you have received this email in error please notify
 the system manager. This message contains confidential information and
 is intended only for the individual named. If you are not the named
 addressee you should not disseminate, distribute or copy this e-mail.

Re: download IBM System Storage Archive Manager v. 5.3 and TSM-OR v. 5.3

[Rainer Holzinger]

Hello Wanda,

thanks a lot for your information.
TSM-OR 5.3.3.0 I have downloaded.
I'm still looking for the IBM System Storage Archive Manager, which was
called TSM for Data Retention before.

Thanks again and enjoy summer,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Prather, Wanda
 Sent: Wednesday, July 19, 2006 7:32 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] download IBM System Storage Archive Manager v.
 5.3 and TSM-OR v. 5.3

 The TSM Operational Reporter is not a separate product.
 To download it, go to the usual FTP site, look for maintenance for the
 WINDOWS TSM server:

 ftp://service.boulder.ibm.com/storage/tivoli-storage-
 management/maintena
 nce/server/v5r3/WIN/LATEST/

 Download TSMCON5330_WIN.exe.
 Click to install on your Windows box.  That's all you need for TSM OR.

 (This pacakge is the standalone version of the Windows TSM server
 console, which doesn't exist in the AIX TSM world.  It contains TSM
 OR.)

 If you need instructions on configuration, look in the admin guide,
 search the .pdf for the keyword Operational.
 Or go here for 2 short .ppt presentations, start with the oldest one:

 http://www.jasi.com/TSMUG/index.php?page=present

 I have not used System Storage Archive Manager, but I did not think
 that
 was a separate product, either.  I think it is just a copy of TSM for
 AIX server with a different license enabled.  Can anybody clarify
 that?

 Wanda Prather
 I/O, I/O, It's all about I/O  -(me)







 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of
 Rainer Holzinger
 Sent: Wednesday, July 19, 2006 1:20 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: download IBM System Storage Archive Manager v. 5.3 and TSM-OR
 v. 5.3

 Hello all,



 we are planning to install quite soon the IBM System Storage Archive
 Manager version 5.3 under AIX.

 Also TSM-OR version 5.3 will be installed on a Windows cluster.

 I have checked the IBM Storage Management download sites (maintenance
 and patches) for both products but without success.

 Does somebody know from where I can download both products?



 Thank you and best regards,

 Rainer

download IBM System Storage Archive Manager v. 5.3 and TSM-OR v. 5.3

[Rainer Holzinger]

Hello all,



we are planning to install quite soon the IBM System Storage Archive
Manager version 5.3 under AIX.

Also TSM-OR version 5.3 will be installed on a Windows cluster.

I have checked the IBM Storage Management download sites (maintenance
and patches) for both products but without success.

Does somebody know from where I can download both products?



Thank you and best regards,

Rainer

Re: TDP for SQL configuration error...

[Rainer Holzinger]

Hello Eric,

have you checked that your MS SQL host is able to resolve the TCP
Hostname of the TSM server?

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Loon, E.J. van - SPLXM
 Sent: Wednesday, June 28, 2006 10:54 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] TDP for SQL configuration error...

 Hi *SM-ers!
 We have got one TDP for SQL (5.2.1) client which refuses to cooperate.
 It's configured like all other TDP clients with a standard dsm.opt
 file
 which contains the correct TCPServeraddress. However, as soon as we
 start the TDP GUI, it returns:

 ANS1033E (RC-53) An invalid TCP/IP address was specified.

 In the directory C:\Program Files\tivoli\TSM\TDPSql a dsierror.log is
 created with the following lines:

 06/26/2006 08:59:43 GetHostnameOrNumber(): gethostbyname(): errno =
 11004.
 06/26/2006 08:59:43 TcpOpen: Could not resolve host name.
 06/26/2006 08:59:43 ANS4039E Could not establish a session with a TSM
 server or client agent. The TSM return code is -53.
 06/26/2006 08:59:43 ANS1033E An invalid TCP/IP address was specified.

 The TSM server listed in the dsm.opt file is pingable from this
 client,
 so it's not a DNS related issue.
 I'm lost here, how can I see which host name TDP tries to resolve? Is
 there any tracing I can turn on to reveal this?
 Thank you very much for any reply in advance!!!
 Kindest regards,
 Eric van Loon


 **
 For information, services and offers, please visit our web site:
 http://www.klm.com. This e-mail and any attachment may contain
 confidential and privileged material intended for the addressee only.
 If you are not the addressee, you are notified that no part of the e-
 mail or any attachment may be disclosed, copied or distributed, and
 that any other action related to this e-mail or attachment is strictly
 prohibited, and may be unlawful. If you have received this e-mail by
 error, please notify the sender immediately by return e-mail, and
 delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its
 subsidiaries and/or its employees shall not be liable for the
 incorrect or incomplete transmission of this e-mail or any
 attachments, nor responsible for any delay in receipt.
 **

TSM-OR, ISC and AC on a Windows cluster

[Rainer Holzinger]

Hello all,



we are planning to install TSM-OR 5.3, ISC 6.01 and AC 5.3 on a Windows
cluster to add some kind of high availability.

This is the first time where this kind of software is being installed
and we don't know so far if it's possible to use a different 'location'
for the data of these applications on a separate file system (drive
letter) to be moved as a cluster resource in case of failover
situations.

Has someone of you implemented TSM-OR, ISC and AC on an environment like
this?



Thank you and best regards,

Rainer





RHo-Consulting

Rembrandtstr. 12

D-93093 Donaustauf

phone:   +49 9403 969188

mobile:  +49 162 2807 888

email:[EMAIL PROTECTED]

Oracle 10g on HPUX 11i

[Rainer Holzinger]

Hello all,



I'm looking for the most current version of TDP for Oracle which
supports Oracle 10g (R1 and R2) running on HPUX 11i.

Can someone point me to the right download page?



Thank you and best regards,

Rainer

Re: Oracle 10g on HPUX 11i

[Rainer Holzinger]

Hello Steve,

thank you for your reply.
It will help to go on here.

Best regards,
Rainer


 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Steve S Lafrance
 Sent: Thursday, April 27, 2006 3:16 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] Oracle 10g on HPUX 11i

 Hi Rainer !

 Data Protection for Oracle V5.2.0 on HP-UX PA-RISC
 Hardware requirements:
 HP 9000 series 700 or 800 workstation
 with 96 MB RAM and 6 MB Disk space.

 Software requirements:
 * Tivoli Storage Manager server V5.1.0 or later
 * Tivoli Storage Manager API V5.1.5 or later

 |
  OS Platform release|Oracle release
 |9i, 10g - single or Real
 Application
 |Cluster
  ---+-
 --
 |
  HP 11(32-bit or 64-bit)|8.1.7 (32-bit or 64-bit)
 |or 9.0.1 (64-bit)
 |or 9.2 (64-bit)
  ---+-
 --
 |
  HP 11i v1 (11.11) (64-bit) |9.2 (64-bit)
  HP 11i v2 (11.23) (64-bit) |or 10g (64-bit)
 |or 10g r2 (64-bit)









 You can check at the following web link :


 .

 http://www-
 1.ibm.com/support/docview.wss?rs=663context=SWJ10q1=oracleuid=swg21
 218302loc=en_UScs=utf-8lang=en

 Best Regards, Steve





  Rainer Holzinger
  rainer_holzinger
  @web.de
 To
  Sent by: ADSM:   ADSM-L@VM.MARIST.EDU
  Dist Stor
 cc
  Manager
  [EMAIL PROTECTED]
 Subject
  .EDU Oracle 10g on HPUX 11i


  04/27/2006 07:33
  AM


  Please respond to
  rainer_holzinger@
   web.de






 Hello all,



 I'm looking for the most current version of TDP for Oracle which
 supports Oracle 10g (R1 and R2) running on HPUX 11i.

 Can someone point me to the right download page?



 Thank you and best regards,

 Rainer

Re: Upgrade mystery

[Rainer Holzinger]

Hello Robert,

as far as I know 'DISKBIFSIZE' is an option for TSM 5.3 and above client
versions.

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Robert Ouzen
 Sent: Wednesday, January 18, 2006 2:01 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] Upgrade mystery

 Hi to all

 I try this on my dsm.opt in the TDP folder but got this:

 01/18/2006 14:50:10 ANS1036S Invalid option 'DISKBUFFSIZE' found in
 options file 'C:\Program Files\Tivoli\TSM\TDPExchange\dsm.opt'
at line number : 28
Invalid entry : 'DISKBUFFSIZE  32'

 My version of TDP for Exchange is 5.2.1.0 and client version is
 5.2.3.0

 Regards Robert Ouzen






 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of LeBlanc, Patricia
 Sent: Wednesday, January 18, 2006 2:44 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: Upgrade mystery

 I applied the change to 2 of my windows exchange servers.here are
 the results...

 Without the DISKBUFFSIZE  32
 Server 04 started at 20:00 and completed at 01:21 Server 05 started at
 20:00 and completed at 00:22

 WITH the DISKBUFFSIZE  32
 Server 04 started at 20:00 and completed at 23:07 Server 05 started at
 20:00 and completed at 22:35.

 I will make the change on the rest of the exchange servers today to
 see the result in the overall run time of the backups.
 Thanks!!

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Steven Harris
 Sent: Tuesday, January 17, 2006 8:12 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: Upgrade mystery

 FWIW Del

 I applied this change to my SAP nodes and lo-and-behold restore
 throughput just about quadrupled.

 But, I applied it to my exchange nodes and there was no discernable
 difference. YMMV

 Steve.



  -Original Message-
  From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
 Behalf
  Of Del Hoobler
  Sent: Tuesday, 17 January 2006 11:47 PM
  To: ADSM-L@VM.MARIST.EDU
  Subject: Re: [ADSM-L] Upgrade mystery
 
 
  Patricia,
 
  See if this append I made last month helps at all:
 
 http://msgs.adsm.org/cgi-bin/get/adsm0512/204.html
 
  Thanks,
 
  Del
 
  
 
  ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU wrote on
  01/17/2006 08:38:42 AM:
 
   I just upgraded my windows2k and w2k3 servers from tsm
  backup client
   5.2 to 5.3.0.8. These servers also run the tdp for exchange
  v5.2.1.0.
  
   Since then, my exchange backups take an hour longer to complete.
  
   Does anyone know of a conflict with the software?  Or a
  setting I need
   to set??
 
 
 

Re: Unable to complete backup of Window's 2000, client failing with - PrivFindDir: No memory to allocate new DirEntry

[Rainer Holzinger]

Hello David,

I've solved a similar case by implementing the TSM Journal Services,
Elapsed backup time before was about 12:30 hours (45 seconds data
transfer time)) and most of the time abends because of running out of
memory.
Now with the Journal Services, the elapsed processing time is only a
couple of minutes an no 'running out of memory' problems anymore. IT's
working excellent now.

Cheers, Rainer


 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of David Browne
 Sent: Tuesday, January 10, 2006 3:35 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] Unable to complete backup of Window's 2000, client
 failing with - PrivFindDir: No memory to allocate new DirEntry

 I have a Window's 2000 SP4 client (with 8 GB of system RAM) running
 TSM
 5.3.0.8 that has two TB of data and around 22 million files in
 approximately 11 million directories.

 The data is on one drive and must stay on one drive due to application
 requirements.

 Looking for suggestions on how to complete a backup without running
 out of
 memory?



 The information transmitted is intended only for the person or entity
 to which it is addressed and may contain CONFIDENTIAL material.  If
 you receive this material/information in error, please contact the
 sender and delete or destroy the material/information.

TDPO and Oracle Real Application Cluster

[Rainer Holzinger]

Hello all,



I'm looking for a solution to 'fully' automate Oracle backups with TDP
for Oracle in an Oracle Real Application Cluster.

The operating system (Suse Linux) is not clustered.

TDPO has been installed on both cluster nodes. Currently all Oracle
(incr0, 1,2 and archive logs) backups are being scheduled to one on the
two nodes. Now I'm looking for a solution how to handle Oracle failover
situations from the point of backup view. This means as well the loss of
a complete cluster node as one of the Oracle systems on the 'primary'
backup cluster node. At least backing up the Oracle archive logs has to
go on oh the other cluster node then.

Has somebody of YOU hints and tips or maybe a solution how to handle
failover situations here?.

Any suggestion is very welcome.



Thank you,

Rainer

Re: journal service in a MS clustered environment

[Rainer Holzinger]

Thank you Neil, that will help me to go on.

Regards, Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Neil Schofield
 Sent: Wednesday, December 14, 2005 8:50 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] journal service in a MS clustered environment

 Rainer

 We have done journal-based backups on MSCS. There is no need for
 multiple
 journal services - one per cluster node is sufficient. The idea is to
 have
 each one configured to journal any file system on which you desire
 JBB, but
 suppress the errors if the resource is not actually on line on that
 node.

 The sample tsmjbbd.ini describes how the parameters DeferFSMonStart,
 DeferRetryInterval and LogFsErrors can be configured to support this.

 This extract from our tsmjbbd.ini shows support for journaling on two
 shared files systems - G: and H:.

 [JournaledFileSystemSettings]
 JournaledFileSystems=G: H:
 ...

 [JournaledFileSystemSettings.G:\]
 DeferFsMonStart=1
 DeferRetryInterval=30
 logFsErrors=0

 [JournaledFileSystemSettings.H:\]
 DeferFsMonStart=1
 DeferRetryInterval=30
 logFsErrors=0

 My only concern about this is what happens if a failover occurs and a
 file
 is modified within the DeferRetryInterval. I guess if it is not
 subsequently modified, it never gets backed up?

 Regards
 Neil Schofield
 Yorkshire Water Services Ltd.



 Let us know when you're moving house on-line at www.yorkshirewater.com

 YORKSHIRE WATER - WINNER OF THE UTILITY OF THE YEAR AWARD

 The information in this e-mail is confidential and may also be legally
 privileged. The contents are intended for recipient only and are
 subject
 to the legal notice available at http://www.keldagroup.com/email.htm
 Yorkshire Water Services Limited
 Registered Office Western House Halifax Road Bradford BD6 2SZ
 Registered in England and Wales No 2366682

journal service in a MS clustered environment

[Rainer Holzinger]

Hello all,

has someone of you implemented multiple journal services on a Microsoft
cluster for the shared file systems?

Any tips for me?



Thank you,

Rainer

Re: TSM client 5.3.2.0 for Windows 2003 32-bit

[Rainer Holzinger]

Hi,

I've tried to install the TSM client services (client scheduler, client
acceptor and remote client agent) with the dsmcutil utility, like I'm
doing all the time. The client acceptor service could not start because
of problems to open particular registry keys. I've used the GUI setup
wizard then and there was no problem anymore.
Another problem was message 'ANS1327W The snapshot operation for C:
failed with error code: 114'. The backup continues without snapshot
support but with rc=12. Other messages like
'GatherWriterStatus(...pHrResultFailure)() failed with
hr=VSS_E_WRITEERROR_NONRETRYABLE' are also in the dsmerror.log. This is
because of a timing problem with OFS and 'domain all-local' and it is
fixed in TSM client version 5.3.2.2, available after December 23rd 2005.

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Henrik Wahlstedt
 Sent: Monday, December 12, 2005 9:08 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] TSM client 5.3.2.0 for Windows 2003 32-bit

 Hi,

 Which bugs, (curious)?

 //Henrik

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of
 Rainer Holzinger
 Sent: den 12 december 2005 08:50
 To: ADSM-L@VM.MARIST.EDU
 Subject: TSM client 5.3.2.0 for Windows 2003 32-bit

 Hello all,



 I'm about to implement a new MSCS into TSM. The TSM client version for
 the Windows client I'm going to implement is 5.3.2.0, which will be
 upgraded somewhere after December 23rd to 5.3.2.2, because of bugs
 I've
 discovered.

 Is there an example available about a typical exclude list for Windows
 2003 servers?



 Thanks,

 Rainer


 ---
 The information contained in this message may be CONFIDENTIAL and is
 intended for the addressee only. Any unauthorised use, dissemination
 of the
 information or copying of this message is prohibited. If you are not
 the
 addressee, please notify the sender immediately by return e-mail and
 delete
 this message.
 Thank you.

TSM client 5.3.2.0 for Windows

[Rainer Holzinger]

Hello all,



I'm implementing a new Microsoft Cluster Server (Windows 2003 server)
into our TSM environment.

We are using a separate network for backup purposes with a separate
backup NIC as well.

The local TSM clients on each cluster node as well as the 'shared' TSM
client's are having different tcp ip addresses like it's recommended in
the documentation (client manual and redbook).

After the password synchronization for all the TSM clients I've check
their tcp ip addresses within the TSM servers node entires. From there I
have seen that all the TSM clients are using the same ip address (the
one from the local TSM client) to connect to the TSM server.

Why don't the 'shared' TSM clients use the ip address that has been
defined by parameter 'tcpclientaddress' within their dsm.opt files? Am I
doing something wrong or misunderstand?



Thank you and best regards,

Rainer

TSM client 5.3.2.0 for Windows 2003 32-bit

[Rainer Holzinger]

Hello all,



I'm about to implement a new MSCS into TSM. The TSM client version for
the Windows client I'm going to implement is 5.3.2.0, which will be
upgraded somewhere after December 23rd to 5.3.2.2, because of bugs I've
discovered.

Is there an example available about a typical exclude list for Windows
2003 servers?



Thanks,

Rainer

TDP for Oracle on Linux

[Rainer Holzinger]

Hello all,



does someone know if there's a TDP for Oracle on Linux available,
supporting Oracle 10g in 64 bit addressing mode?

If so from where can I download it?



Thank you, Rainer

Re: TDP for Oracle on Linux

[Rainer Holzinger]

Thank you Richard,

I have been there a few minutes ago and saw that I need Data Protection
for Oracle V5.2.4 on Linux for AMD64 or EM64T (also known as x86_64).

But from where can I download the code and the product manual?

Thank you,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Richard Sims
 Sent: Thursday, December 01, 2005 1:02 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] TDP for Oracle on Linux

 On Dec 1, 2005, at 3:20 AM, Rainer Holzinger wrote:
 
  does someone know if there's a TDP for Oracle on Linux available,
  supporting Oracle 10g in 64 bit addressing mode?
 
  If so from where can I download it?

 See the TSM Products page:
 http://www.ibm.com/software/tivoli/products/storage-mgr/product-
 links.html
 for IBM Tivoli Storage Manager for Databases, System Requirements,
 which has all the latest on what's available.

 Richard Sims

FW: [ADSM-L] TDP for Oracle on Linux

[Rainer Holzinger]

 -Original Message-
 From: Rainer Holzinger [mailto:[EMAIL PROTECTED]
 Sent: Thursday, December 01, 2005 2:54 PM
 To: 'ADSM: Dist Stor Manager'
 Subject: RE: [ADSM-L] TDP for Oracle on Linux

 Thanks again Richard,

 to summarize:

   no manual avaiable for verios 5.2.4 or 5.3
   no code for TDP for Databases 5.3 or 5.2.4 available for
 download

 I hope someone from IBM is reading this and maybe has a good tip for
 me.

 Cheers,
 Rainer


  -Original Message-
  From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
 Behalf
  Of Richard Sims
  Sent: Thursday, December 01, 2005 2:20 PM
  To: ADSM-L@VM.MARIST.EDU
  Subject: Re: [ADSM-L] TDP for Oracle on Linux
 
  On Dec 1, 2005, at 7:36 AM, Rainer Holzinger wrote:
 
   Thank you Richard,
  
   I have been there a few minutes ago and saw that I need Data
   Protection
   for Oracle V5.2.4 on Linux for AMD64 or EM64T (also known as
  x86_64).
  
   But from where can I download the code and the product manual?
 
  Linux may be free, but the TDP is the usual cost item, usual IBM
  channels.
 
  All TSM manuals can be had from
http://publib.boulder.ibm.com/infocenter/tivihelp/v1r1/index.jsp
  (which can be had via the TSM TDP for Databases support page
http://www.ibm.com/software/sysmgmt/products/support/
  IBMTivoliStorageManagerforDatabases.html )
  Alas, the manuals don't seem to be up to date, being two years old
  now.
 
 Richard Sims

TDP for Oracle 5.2.x

[Rainer Holzinger]

Hello all,



I'm about to install TDP for Oracle on three Suse Linux servers.

The Oracle version is 10g on a Oracle Real Application Cluster.



The TDPO base version (5.2.0) has been downloaded from the passport
advantage site. I have visited now the ftp download site to check for
patches. I haven't found a maintenance level or patch level there for
Linux. For AIX, HPUX and Solaris there are files available. Is there
nothing new on 5.2.0 or did I miss something?



Thanks, Rainer

Re: TSM and TDP for ... manuals

[Rainer Holzinger]

Hello Eric,

I'm only being forwarded if I'm 'clicking' the HTML documentation of the
5.3. version. The TDP for Oracle documentation is version 5.2, so it
seem there is no 5.3. version available. The HTML documentation is
really in German, whereas the PDF version is in English. Maybe this is
because the Windows XP on my laptop has been installed in German?

Best regards, Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Loon, E.J. van - SPLXM
 Sent: Monday, October 31, 2005 9:31 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] TSM and TDP for ... manuals

 Hi Rainer!
 German manuals?!?!? I didn't even know they exist!
 Strange, when I select the TSM for AIX link on that page
 (http://publib.boulder.ibm.com/tividd/td/IBMStorageManagerforAIX5.3.ht
 ml) I'm forwarded to the page
 http://publib.boulder.ibm.com/tividd/td/SMAIXN/redirect/en_US/HTML/red
 irect.htm which is a US English version...
 Kindest regards,
 Eric van Loon
 KLM Royal Dutch Airlines


 -Original Message-
 From: Rainer Holzinger [mailto:[EMAIL PROTECTED]
 Sent: Monday, October 31, 2005 07:58
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: TSM and TDP for ... manuals


 Hello Eric,

 I've followed your description and got access to the manuals.
 Unfortunately everything is in German language. What can I do to have
 English manuals available?

 Thank you and best regards,
 Rainer

  -Original Message-
  From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
 Behalf
  Of Loon, E.J. van - SPLXM
  Sent: Thursday, October 27, 2005 9:40 AM
  To: ADSM-L@VM.MARIST.EDU
  Subject: Re: [ADSM-L] TSM and TDP for ... manuals
 
  Hi Rainer!
  Go to the page
  http://publib.boulder.ibm.com/tividd/td/tdprodlist.html#s.
  On this page you can select the appropriate TDP product and you are
  forwarded to the Tivoli Information Center website.
  At the bottom of each chapter you can find the PDF document which
 you
  can download.
  If you prefer the HTML documents, the only solution is to download
 the
  complete Tivoli Information Center package (including the server)
 from
  Passport Advantage.
  Kindest regards,
  Eric van Loon
  KLM Royal Dutch Airlines
 
 
  -Original Message-
  From: Rainer Holzinger [mailto:[EMAIL PROTECTED]
  Sent: Thursday, October 27, 2005 06:40
  To: ADSM-L@VM.MARIST.EDU
  Subject: TSM and TDP for ... manuals
 
 
  Hello,
 
 
 
  from where can I download the latest (5.3.2) TSM client manuals and
  TDP
  for . 5.3 (e.g. Oracle, mySAP.com) manuals?
 
 
 
  Thank you,
 
  Rainer
 
 
 
  
 
  RHo-Consulting
 
  Rembrandtstr. 12
 
  D-93093 Donaustauf
 
  phone:   +49 9403 969188
 
  mobile:  +49 162 2807 888
 
  email:[EMAIL PROTECTED]
 
   [EMAIL PROTECTED]
 
 
 
 **
  For information, services and offers, please visit our web site:
  http://www.klm.com. This e-mail and any attachment may contain
  confidential and privileged material intended for the addressee
 only.
  If you are not the addressee, you are notified that no part of the
 e-
  mail or any attachment may be disclosed, copied or distributed, and
  that any other action related to this e-mail or attachment is
 strictly
  prohibited, and may be unlawful. If you have received this e-mail by
  error, please notify the sender immediately by return e-mail, and
  delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM),
 its
  subsidiaries and/or its employees shall not be liable for the
  incorrect or incomplete transmission of this e-mail or any
  attachments, nor responsible for any delay in receipt.
 
 **

Re: TSM and TDP for ... manuals

[Rainer Holzinger]

Hello Eric,

I've followed your description and got access to the manuals.
Unfortunately everything is in German language. What can I do to have
English manuals available?

Thank you and best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Loon, E.J. van - SPLXM
 Sent: Thursday, October 27, 2005 9:40 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] TSM and TDP for ... manuals

 Hi Rainer!
 Go to the page
 http://publib.boulder.ibm.com/tividd/td/tdprodlist.html#s.
 On this page you can select the appropriate TDP product and you are
 forwarded to the Tivoli Information Center website.
 At the bottom of each chapter you can find the PDF document which you
 can download.
 If you prefer the HTML documents, the only solution is to download the
 complete Tivoli Information Center package (including the server) from
 Passport Advantage.
 Kindest regards,
 Eric van Loon
 KLM Royal Dutch Airlines


 -Original Message-
 From: Rainer Holzinger [mailto:[EMAIL PROTECTED]
 Sent: Thursday, October 27, 2005 06:40
 To: ADSM-L@VM.MARIST.EDU
 Subject: TSM and TDP for ... manuals


 Hello,



 from where can I download the latest (5.3.2) TSM client manuals and
 TDP
 for . 5.3 (e.g. Oracle, mySAP.com) manuals?



 Thank you,

 Rainer



 

 RHo-Consulting

 Rembrandtstr. 12

 D-93093 Donaustauf

 phone:   +49 9403 969188

 mobile:  +49 162 2807 888

 email:[EMAIL PROTECTED]

  [EMAIL PROTECTED]


 **
 For information, services and offers, please visit our web site:
 http://www.klm.com. This e-mail and any attachment may contain
 confidential and privileged material intended for the addressee only.
 If you are not the addressee, you are notified that no part of the e-
 mail or any attachment may be disclosed, copied or distributed, and
 that any other action related to this e-mail or attachment is strictly
 prohibited, and may be unlawful. If you have received this e-mail by
 error, please notify the sender immediately by return e-mail, and
 delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its
 subsidiaries and/or its employees shall not be liable for the
 incorrect or incomplete transmission of this e-mail or any
 attachments, nor responsible for any delay in receipt.
 **

Re: TSM and TDP for ... manuals

[Rainer Holzinger]

Hello Eric,

thanks a lot for this information.
I'll go there to get them.

Best regards,
Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Loon, E.J. van - SPLXM
 Sent: Thursday, October 27, 2005 9:40 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] TSM and TDP for ... manuals

 Hi Rainer!
 Go to the page
 http://publib.boulder.ibm.com/tividd/td/tdprodlist.html#s.
 On this page you can select the appropriate TDP product and you are
 forwarded to the Tivoli Information Center website.
 At the bottom of each chapter you can find the PDF document which you
 can download.
 If you prefer the HTML documents, the only solution is to download the
 complete Tivoli Information Center package (including the server) from
 Passport Advantage.
 Kindest regards,
 Eric van Loon
 KLM Royal Dutch Airlines


 -Original Message-
 From: Rainer Holzinger [mailto:[EMAIL PROTECTED]
 Sent: Thursday, October 27, 2005 06:40
 To: ADSM-L@VM.MARIST.EDU
 Subject: TSM and TDP for ... manuals


 Hello,



 from where can I download the latest (5.3.2) TSM client manuals and
 TDP
 for . 5.3 (e.g. Oracle, mySAP.com) manuals?



 Thank you,

 Rainer



 

 RHo-Consulting

 Rembrandtstr. 12

 D-93093 Donaustauf

 phone:   +49 9403 969188

 mobile:  +49 162 2807 888

 email:[EMAIL PROTECTED]

  [EMAIL PROTECTED]


 **
 For information, services and offers, please visit our web site:
 http://www.klm.com. This e-mail and any attachment may contain
 confidential and privileged material intended for the addressee only.
 If you are not the addressee, you are notified that no part of the e-
 mail or any attachment may be disclosed, copied or distributed, and
 that any other action related to this e-mail or attachment is strictly
 prohibited, and may be unlawful. If you have received this e-mail by
 error, please notify the sender immediately by return e-mail, and
 delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its
 subsidiaries and/or its employees shall not be liable for the
 incorrect or incomplete transmission of this e-mail or any
 attachments, nor responsible for any delay in receipt.
 **

dsmerror.log in TSM client version 5.3

[Rainer Holzinger]

Hello all,



after upgrading some TSM clients (on AIX and Solaris) to version 5.3.2.0
I have noticed that there's always a 'new' dsmerror.log file existing,
even if there hasn't been an error.

If dsmerror.log wasn't existing then the file size is 0 (zero) bytes and
it seems dsmerror.log was created like the Unix 'touch' command is
doing. On the other hand, if dsmerror.log was existing and had entries
in, the timestamp has been updated with the one of the last scheduled
backup even if the wasn't an error in that backup operation.

Has this something to do with IBM's changes for the DSM_LOG environment
variable and the check that dsmerror.log is writable?



Thanks, Rainer





RHo-Consulting

Rembrandtstr. 12

D-93093 Donaustauf

phone:   +49 9403 969188

mobile:  +49 162 2807 888

email:[EMAIL PROTECTED]

 [EMAIL PROTECTED]

Re: dsmerror.log in TSM client version 5.3

[Rainer Holzinger]

Thank you Richard.

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Richard Sims
 Sent: Wednesday, October 26, 2005 1:25 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] dsmerror.log in TSM client version 5.3

 On Oct 26, 2005, at 5:40 AM, Rainer Holzinger wrote:

  after upgrading some TSM clients (on AIX and Solaris) to version
  5.3.2.0
  I have noticed that there's always a 'new' dsmerror.log file
 existing,
  even if there hasn't been an error.
 
  If dsmerror.log wasn't existing then the file size is 0 (zero)
  bytes and
  it seems dsmerror.log was created like the Unix 'touch' command is
  doing. On the other hand, if dsmerror.log was existing and had
 entries
  in, the timestamp has been updated with the one of the last
 scheduled
  backup even if the wasn't an error in that backup operation.
 
  Has this something to do with IBM's changes for the DSM_LOG
  environment
  variable and the check that dsmerror.log is writable?
 

 Hi, Rainer -

 Seems to be the case...
 The client download Readme file goes into more detail than the client
 manual:

 Initialization of the client and its various components has been
 significantly revised. In particular, if you are using scripts to
 accomplish certain tasks, you will notice:
 The client application (dsmc, dsmadmc) will not run without a
 writable error log. If a log is not present, one will be opened under
 the uid of the user that invokes the application and with that user's
 default permissions. This may mean that another user may not have
 write permission and the client will not run.
 There must always be an error log. If it is created new for each run
 and there are no errors, it will be empty at process termination.
 If the error log exists and is writable by the invoking user, it will
 be preserved along with all permissions and ACLs if they exist. It is
 strongly recommended that you create any required logs in a directory
 and with proper permissions to allow all users write access.

 Richard Sims

TSM and TDP for ... manuals

[Rainer Holzinger]

Hello,



from where can I download the latest (5.3.2) TSM client manuals and TDP
for . 5.3 (e.g. Oracle, mySAP.com) manuals?



Thank you,

Rainer





RHo-Consulting

Rembrandtstr. 12

D-93093 Donaustauf

phone:   +49 9403 969188

mobile:  +49 162 2807 888

email:[EMAIL PROTECTED]

 [EMAIL PROTECTED]

Re: TSM license files

[Rainer Holzinger]

James,

I don't know if there's something inside of the TSM server# database
about it. But there's an external file called 'nodelock' in the TSM
server's default installation directory (in AIX --
/usr/tivoli/tsm/server/bin) where all your 'register license' commands
are being written to.

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of James Choate
 Sent: Monday, October 24, 2005 9:44 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] TSM license files

 Does anyone know where TSM stores the license files that are currently
 registered on a TSM server?  Are the licenses stored in an internal
 table within the database, or are they stored in an external file.

 The reason I ask, is that I moved a TSM server from older hardware to
 newer hardware, and after the move, I had to go register the licenses.
 This wasn't a big deal, because I just re-registered the licenses. But
 I
 was just curios why after I loaded the TSM database from the old
 server
 onto the new server, the licenses didn't automatically transfer.

 Thanks in advance.

 ~James

Re: expiration Oracle backups

[Rainer Holzinger]

Hello,

I'm running 18 Oracle systems on HP-UX which are backed up by TDP for
Oracle.
The TDP for Oracle version is 5.2.1.0, the TSM servers 5.2.4.1 on AIX
5.2 ML05. Oracle serves are at level 9i and 10g.
Our Oracle administrators have written a RMAN script that deletes
obsolete backups. I was monitoring the first deletes from RMAN and seen
that the delete from RMAN inactivates the TDPO objects on the TSM
server. The next expire inventory process will delete the TDPO objects
from the TSM database and managed storage. I think this is the reason
for BACKDEL=yes, Versions Data Deleted = 0 and Retain Only Version = 0.

In general this works fine in our installation. But in the meantime
there is one Oracle system where we have found 'old' TDPO objects in TSM
storage but no entries in the RMAN recovery catalog. Even a 'TDPOSYNC
SYNCDB' did not remove or inactivate the TDPO objects which should be
there anymore. I will test some other things and come back to the list
if there's a solution.

best regards,
Rainer


 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Jurjen Oskam
 Sent: Friday, October 14, 2005 9:13 AM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] expiration Oracle backups

 On Thu, Oct 13, 2005 at 07:38:18AM -0700, Neil Rasmussen wrote:

  When deleting Rman objects on the TSM Server, TDP Oracle uses the
 delete
  function on objectsthe objects do not move to inactive they are
 just
  simply deleted from the TSM Server.

 While the manual says to create nodes for RMAN with Delete Backup
 permission set to yes, the manual also says to use a managementclass
 that
 has Versions Data Deleted = 0 and Retain Only Version = 0. If what you
 say
 is true (and I have no reason to doubt that :) ), then these settings
 are
 not relevant, since there are no inactive RMAN objects. Am I right?

 --
 Jurjen Oskam

Re: Online copypool with LANFREE backup

[Rainer Holzinger]

Hello Tom,

this is not supported with teh LANFree backup method.
At least not with V 5.2 Storage Agent.

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Tomáš Hrouda
 Sent: Thursday, September 08, 2005 3:33 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: [ADSM-L] Online copypool with LANFREE backup
 
 Hi all,
 
 we are now in progress of testing LANFREE backups on TDP R3 on Oracle
 (AIX)
 and I found an issue with using in the fly copypool. I would like to
 storage agent write simultaneous copy of data into copypool (like
 server
 does). But when I defined copypool within primary tapepool, where
 LANFREE
 client is pointed to, lanfree backup fall into normal LAN backup (of
 course
 with simultaneous write to that copypool). So question: is LANFREE
 agent
 able to use this feature or not?
 
 Thanks for any advice.
 
 Tom

product support of ITSM 5.2

[Rainer Holzinger]

Hello,



from where can I see how long IBM is supporting ITSM version 5.2?



Thank you,

Rainer

Re: product support of ITSM 5.2

[Rainer Holzinger]

Thank you Richard,

Rainer

 -Original Message-
 From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
 Of Richard Sims
 Sent: Wednesday, August 31, 2005 3:01 PM
 To: ADSM-L@VM.MARIST.EDU
 Subject: Re: [ADSM-L] product support of ITSM 5.2

 On Web pages
   http://www-306.ibm.com/software/sysmgmt/products/support/eos.html
   http://www-306.ibm.com/software/info/supportlifecycle/list/t.html
 you will find that a given level lasts maybe three years.
 End of Support will be posted on the eos page after it is decided
 and announced.

  Richard Sims

 On Aug 31, 2005, at 8:33 AM, Rainer Holzinger wrote:

  Hello,
 
  from where can I see how long IBM is supporting ITSM version 5.2?

AW: [ADSM-L] AW: [ADSM-L] monthly backup/archive report

[Rainer Holzinger]

Hello Richard,

I will have to enable the ITSM account within the test server first, from
where we a pretty good measurement about overhead. Well that's the way it
is.
From where can I download your program(s) to test it after a while?
Do you invoke them from within crontab? 

Thank you,
Rainer


 -Ursprüngliche Nachricht-
 Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von
 Richard Sims
 Gesendet: Mittwoch, 3. August 2005 16:32
 An: ADSM-L@VM.MARIST.EDU
 Betreff: Re: [ADSM-L] AW: [ADSM-L] monthly backup/archive report
 
 On Aug 3, 2005, at 10:15 AM, Rainer Holzinger wrote:
 
  Hello Richard,
 
  excellent reports. There's almost everything in which I need.
  Unfortunately we haven't turned on accounting which is the base of
  your
  reporting. I have to convince my customer to enable accounting but
  they are
  afraid about the overhead.
 
 
 Hi, Rainer -
 
 I envision Beaker, at Muppet Labs...  :-)
 About all it amounts to is writing an ASCII string to a file, from data
 which has been compiled for other purposes in the server anyway.
 Any overhead would be undetectably small; and in any case, the
 value of
 the data far outweighs the tiny cost to write the record.
 Running with accounting turned on is common.
 Fear can be ameliorated by trying out a previously untried feature.
 
 Richard Sims

technotes

[Rainer Holzinger]

Hello,



from which IBM web site can I access IBM's technotes?



Thank you,

Rainer





RHo-Consulting

Rembrandtstr. 12

D-93093 Donaustauf

phone:   +49 9403 969188

mobile:  +49 162 2807 888

email:[EMAIL PROTECTED]

AW: [ADSM-L] OFS for Win2003 clients

[Rainer Holzinger]

Thank you Eric.

Regards, Rainer

 -Ursprüngliche Nachricht-
 Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von
 Loon, E.J. van - SPLXM
 Gesendet: Mittwoch, 3. August 2005 09:45
 An: ADSM-L@VM.MARIST.EDU
 Betreff: Re: [ADSM-L] OFS for Win2003 clients
 
 Hi Rainer!
 Probably 4th. quarter this year. Checkout the informal statement from
 Andy:
 http://msgs.adsm.org/cgi-bin/get/adsm0506/31/2.html
 Kindest regards,
 Eric van Loon
 KLM Royal Dutch Airlines
 
 
 -Original Message-
 From: Rainer Holzinger [mailto:[EMAIL PROTECTED]
 Sent: Tuesday, August 02, 2005 18:18
 To: ADSM-L@VM.MARIST.EDU
 Subject: OFS for Win2003 clients
 
 
 Hello,
 
 
 
 does someone know when IBM will have OFS available to us for Windows 2003
 clients?
 
 
 
 In 5.2 it's supported for Win2K and WinXP only. I haven't found anything
 new
 in ITSM 5.3.
 
 
 
 Regards, Rainer
 
 
 
 
 
 RHo-Consulting
 
 Rembrandtstr. 12
 
 D-93093 Donaustauf
 
 phone:   +49 9403 969188
 
 mobile:  +49 162 2807 888
 
 email:[EMAIL PROTECTED]
 
 
 **
 For information, services and offers, please visit our web site:
 http://www.klm.com. This e-mail and any attachment may contain
 confidential and privileged material intended for the addressee only. If
 you are not the addressee, you are notified that no part of the e-mail or
 any attachment may be disclosed, copied or distributed, and that any other
 action related to this e-mail or attachment is strictly prohibited, and
 may be unlawful. If you have received this e-mail by error, please notify
 the sender immediately by return e-mail, and delete this message.
 Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
 employees shall not be liable for the incorrect or incomplete transmission
 of this e-mail or any attachments, nor responsible for any delay in
 receipt.
 **