Re: 'q libv' question
Greetings Chuck, Sometimes when we have problems with labels we get tapes marked private. Also we have the rare tape that should have been released back to the scratch pool that just doesn't get updated for some reason after reclamation. I 'q contents' just as a double check that the database really doesn't have anything on the tape, check the database backups to make sure it isn't a mislabeld member of that set, then 'update libvol $lib $tape status=scratch'. - Kai. Date:Thu, 2 May 2002 16:33:47 -0700 From:Chuck Lam [EMAIL PROTECTED] Subject: 'q libv' question Hi - List, TSM 4.1.4 runs on AIX4.3.3. I noticed the following when I do 'q libv' recently: Three of the tapes were marked 'Private' under STATUS, but were blank under LAST USE. Usually when a tape is scratched, the LAST USE then becomes blank. A Private tapes is associated with DATA under LAST USE. I did not know how that came about and how to fix it. Any suggestions? TIA
'q libv' question
Hi - List, TSM 4.1.4 runs on AIX4.3.3. I noticed the following when I do 'q libv' recently: Three of the tapes were marked 'Private' under STATUS, but were blank under LAST USE. Usually when a tape is scratched, the LAST USE then becomes blank. A Private tapes is associated with DATA under LAST USE. I did not know how that came about and how to fix it. Any suggestions? TIA __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com
Re: 'q libv' question
They might be checked in as status=private or stayed private for some reason. You can try UPDate LIBVolume library libvol STATus=SCRatch Zlatko Krastev IT Consultant Please respond to ADSM: Dist Stor Manager [EMAIL PROTECTED] Sent by:ADSM: Dist Stor Manager [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject:'q libv' question Hi - List, TSM 4.1.4 runs on AIX4.3.3. I noticed the following when I do 'q libv' recently: Three of the tapes were marked 'Private' under STATUS, but were blank under LAST USE. Usually when a tape is scratched, the LAST USE then becomes blank. A Private tapes is associated with DATA under LAST USE. I did not know how that came about and how to fix it. Any suggestions? TIA __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com
Re: 'q libv' question
Search the activity log for the past few days with the volume name in the search. You may see that the volume was put into a drive and then found to be mis-labeled, not labeled or in some other way messed up. If that happens, and the volume doesn't get far enough to be used, TSM will mark it private so as not to try to use it again. I've seen this particularly with tapes that are in the library, but not labeled. Kelly J. Lipp Storage Solutions Specialists, Inc. PO Box 51313 Colorado Springs, CO 80949 [EMAIL PROTECTED] or [EMAIL PROTECTED] www.storsol.com or www.storserver.com (719)531-5926 Fax: (240)539-7175 -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Zlatko Krastev Sent: Thursday, May 02, 2002 5:09 PM To: [EMAIL PROTECTED] Subject: Re: 'q libv' question They might be checked in as status=private or stayed private for some reason. You can try UPDate LIBVolume library libvol STATus=SCRatch Zlatko Krastev IT Consultant Please respond to ADSM: Dist Stor Manager [EMAIL PROTECTED] Sent by:ADSM: Dist Stor Manager [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject:'q libv' question Hi - List, TSM 4.1.4 runs on AIX4.3.3. I noticed the following when I do 'q libv' recently: Three of the tapes were marked 'Private' under STATUS, but were blank under LAST USE. Usually when a tape is scratched, the LAST USE then becomes blank. A Private tapes is associated with DATA under LAST USE. I did not know how that came about and how to fix it. Any suggestions? TIA __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com
Re: 'q libv' question
If the tape has been ejected from the library and reinserted this will happen. I also seem to remember this happening when a tape is empty and has a reuse period in the stg pool causing this. The tape is private because it is still in the pool and can be reused but the last use is cleared to reflect nothing on the tape. Paul D. Seay, Jr. Technical Specialist Naptheon, INC 757-688-8180 -Original Message- From: Chuck Lam [mailto:[EMAIL PROTECTED]] Sent: Thursday, May 02, 2002 7:34 PM To: [EMAIL PROTECTED] Subject: 'q libv' question Hi - List, TSM 4.1.4 runs on AIX4.3.3. I noticed the following when I do 'q libv' recently: Three of the tapes were marked 'Private' under STATUS, but were blank under LAST USE. Usually when a tape is scratched, the LAST USE then becomes blank. A Private tapes is associated with DATA under LAST USE. I did not know how that came about and how to fix it. Any suggestions? TIA __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com