Re: 3575 Audit library failure
No drives in use, it's been working in the past. The library has had firmware upgrades over time too however. > -Original Message- > From: David Longo [SMTP:[EMAIL PROTECTED]] > Sent: Wednesday, July 03, 2002 10:09 PM > To: [EMAIL PROTECTED] > Subject: Re: 3575 Audit library failure > > You didn't mention if this is new or had been working awhile > and quit. But, if any drives are in use on the library, the audit > will hang. Make sure all tapes are dismounted and then run > audit. Should use "checklabel=barocde" parameter and it should only > take about 20-30 seconds. > > David Longo > > >>> [EMAIL PROTECTED] 07/02/02 10:51PM >>> > Hi *SMers, > I have a problem with a 3575L18 library that is > refusing to respond to > an "audit library" (either barcode or not). It just sits there and so does > the process. > > Versions are as follows: > > Command Line Administrative Interface - Version 4, Release 2, Level 0.0 > > Session established with server _XXX: AIX-RS/6000 > Server Version 4, Release 2, Level 0.0 > > The 3584 library has no such problems and both are operating via the same > TSM instance on one > node. > > Does the library need a firmware upgrade? Is it the TSM version causing > this? > > Thanks. > > > > > > ** > Bunnings Legal Disclaimer: > > 1) This document is confidential and may contain legally privileged > information. If you are not the intended recipient, you must not > disclose or use the information contained in it. If you have > received this e-mail in error, please notify us immediately by > return email and delete the document. > > 2) All e-mails sent to and sent from Bunnings Building Supplies are > scanned for content. Any material deemed to contain inappropriate > subject matter will be reported to the e-mail administrator of > all parties concerned. > > ** > > > > "MMS " made the following > annotations on 07/03/2002 10:10:33 AM > -- > > This message is for the named person's use only. It may contain > confidential, proprietary, or legally privileged information. No > confidentiality or privilege is waived or lost by any mistransmission. If > you receive this message in error, please immediately delete it and all > copies of it from your system, destroy any hard copies of it, and notify > the sender. You must not, directly or indirectly, use, disclose, > distribute, print, or copy any part of this message if you are not the > intended recipient. Health First reserves the right to monitor all e-mail > communications through its networks. Any views or opinions expressed in > this message are solely those of the individual sender, except (1) where > the message states such views or opinions are on behalf of a particular > entity; and (2) the sender is authorized by the entity to give such views > or opinions. > > == > === ** Bunnings Legal Disclaimer: 1) This document is confidential and may contain legally privileged information. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this e-mail in error, please notify us immediately by return email and delete the document. 2) All e-mails sent to and sent from Bunnings Building Supplies are scanned for content. Any material deemed to contain inappropriate subject matter will be reported to the e-mail administrator of all parties concerned. **
Re: 3575 Audit library failure
You didn't mention if this is new or had been working awhile and quit. But, if any drives are in use on the library, the audit will hang. Make sure all tapes are dismounted and then run audit. Should use "checklabel=barocde" parameter and it should only take about 20-30 seconds. David Longo >>> [EMAIL PROTECTED] 07/02/02 10:51PM >>> Hi *SMers, I have a problem with a 3575L18 library that is refusing to respond to an "audit library" (either barcode or not). It just sits there and so does the process. Versions are as follows: Command Line Administrative Interface - Version 4, Release 2, Level 0.0 Session established with server _XXX: AIX-RS/6000 Server Version 4, Release 2, Level 0.0 The 3584 library has no such problems and both are operating via the same TSM instance on one node. Does the library need a firmware upgrade? Is it the TSM version causing this? Thanks. ** Bunnings Legal Disclaimer: 1) This document is confidential and may contain legally privileged information. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this e-mail in error, please notify us immediately by return email and delete the document. 2) All e-mails sent to and sent from Bunnings Building Supplies are scanned for content. Any material deemed to contain inappropriate subject matter will be reported to the e-mail administrator of all parties concerned. ** "MMS " made the following annotations on 07/03/2002 10:10:33 AM -- This message is for the named person's use only. It may contain confidential, proprietary, or legally privileged information. No confidentiality or privilege is waived or lost by any mistransmission. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it, and notify the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient. Health First reserves the right to monitor all e-mail communications through its networks. Any views or opinions expressed in this message are solely those of the individual sender, except (1) where the message states such views or opinions are on behalf of a particular entity; and (2) the sender is authorized by the entity to give such views or opinions. =
3575 Audit library failure
Hi *SMers, I have a problem with a 3575L18 library that is refusing to respond to an "audit library" (either barcode or not). It just sits there and so does the process. Versions are as follows: Command Line Administrative Interface - Version 4, Release 2, Level 0.0 Session established with server _XXX: AIX-RS/6000 Server Version 4, Release 2, Level 0.0 The 3584 library has no such problems and both are operating via the same TSM instance on one node. Does the library need a firmware upgrade? Is it the TSM version causing this? Thanks. ** Bunnings Legal Disclaimer: 1) This document is confidential and may contain legally privileged information. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this e-mail in error, please notify us immediately by return email and delete the document. 2) All e-mails sent to and sent from Bunnings Building Supplies are scanned for content. Any material deemed to contain inappropriate subject matter will be reported to the e-mail administrator of all parties concerned. **
