Re: Antwort: [ADSM-L] Now that I have a TS3500 - I have questions
Thanks for that tip. On Tue, May 28, 2013 at 9:47 AM, Reese, Michael A (Mike) CIV USARMY 93 SIG BDE (US) wrote: > Hi Zoltan, > > > > Add waittime=0 to your checkin command and the operator prompt goes away. > > > > Mike > > > From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Zoltan > Forray [zfor...@vcu.edu] > Sent: Tuesday, May 28, 2013 9:41 AM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] Antwort: [ADSM-L] Now that I have a TS3500 - I have > questions > > Thanks for the suggestion. My only issue with the SEARCH=BULK is it they > puts up an operator prompt requiring a reply. Is this is the way it has to > be to work properly, I/the operators can live with it. > > > On Tue, May 28, 2013 at 9:27 AM, Dierk Harbort >wrote: > > > Hi Zoltan, > > > > > > for checkin I would recommend to fill the I/O slots and then do "checkin > > libvol search=bulk checklabel=barcode status= > scratch or private>" > > > > I can't say anything to virtual libs > > > > regards > > Dierk > > > > > > |> > > | Von: | > > |> > > > > > >--| > > |Zoltan Forray > > > > | > > > > > >--| > > |> > > | An:| > > |> > > > > > >--| > > |ADSM-L@VM.MARIST.EDU, > > > > | > > > > > >--| > > |> > > | Datum: | > > |> > > > > > >--| > > |28.05.2013 15:17 > > >| > > > > > >--| > > |> > > | Betreff: | > > |> > > > > > >--| > > |[ADSM-L] Now that I have a TS3500 - I have questions > > >| > > > > > >--| > > |> > > | Gesendet | > > | von: | > > |> > > > > > >--| > > |"ADSM: Dist Stor Manager" > > >| > > > > > >--| > > > > > > > > > > > > Our new TS3500 was installed this weekend (replacing our 17-year old > 3494) > > and I have lots of questions about how things should be done/configured > and > > why it is doing what it is doing. > > > > First off, the library is configured as 2-virtual librarys, each side > with > > fixed drive assignments and each side managed by a separate TSM server. > > > > 1. Per other discussions, I configured 255 "Virtual IO". We also > > configured/enabled "Insert Notification". However, some tapes keep being > > inserted "unassigned" while most are properly assigned to the right > > library?. Why? > > > > 2. What is the proper CHECKIN command options for doing mass checkins > from > > the IO/VIO slots?SEARCH=BULK or SEARCH=YES - CHECKLABEL=YES or > > CHECKLABEL=BARCODE? The book says for a SCSI library you can't specify > > SEARCH=YES and CHECKLABEL=NO > > > > -- > > *Zoltan Forray* > > TSM Software & Hardware Administrator > > Virginia Commonwealth University > > UCC/Office of Technology Services > >
Re: Antwort: [ADSM-L] Now that I have a TS3500 - I have questions
waitt=0 >>> Zoltan Forray 5/28/2013 9:41 AM >>> Thanks for the suggestion. My only issue with the SEARCH=BULK is it they puts up an operator prompt requiring a reply. Is this is the way it has to be to work properly, I/the operators can live with it. On Tue, May 28, 2013 at 9:27 AM, Dierk Harbort wrote: > Hi Zoltan, > > > for checkin I would recommend to fill the I/O slots and then do "checkin > libvol search=bulk checklabel=barcode status= scratch or private>" > > I can't say anything to virtual libs > > regards > Dierk > > > |> > | Von: | > |> > > >--| > |Zoltan Forray > > | > > >--| > |> > | An:| > |> > > >--| > |ADSM-L@VM.MARIST.EDU, > > | > > >--| > |> > | Datum: | > |> > > >--| > |28.05.2013 15:17 > | > > >--| > |> > | Betreff: | > |> > > >--| > |[ADSM-L] Now that I have a TS3500 - I have questions > | > > >--| > |> > | Gesendet | > | von: | > |> > > >--| > |"ADSM: Dist Stor Manager" > | > > >--| > > > > > > Our new TS3500 was installed this weekend (replacing our 17-year old 3494) > and I have lots of questions about how things should be done/configured and > why it is doing what it is doing. > > First off, the library is configured as 2-virtual librarys, each side with > fixed drive assignments and each side managed by a separate TSM server. > > 1. Per other discussions, I configured 255 "Virtual IO". We also > configured/enabled "Insert Notification". However, some tapes keep being > inserted "unassigned" while most are properly assigned to the right > library?. Why? > > 2. What is the proper CHECKIN command options for doing mass checkins from > the IO/VIO slots?SEARCH=BULK or SEARCH=YES - CHECKLABEL=YES or > CHECKLABEL=BARCODE? The book says for a SCSI library you can't specify > SEARCH=YES and CHECKLABEL=NO > > -- > *Zoltan Forray* > TSM Software & Hardware Administrator > Virginia Commonwealth University > UCC/Office of Technology Services > zfor...@vcu.edu - 804-828-4807 > Don't be a phishing victim - VCU and other reputable organizations will > never use email to request that you reply with your password, social > security number or confidential personal information. For more details > visit http://infosecurity.vcu.edu/phishing.html > > > > Bürgel Wirtschaftsinformationen GmbH & Co. KG > Gasstraße 18 > 22761 Hamburg > > Geschäftsführer: Klaus-Jürgen Baum, Dr. Norbert Sellin, Stefan Duncker > Registergericht: Hamburg HRA 85212 > USt-IdNr.: DE 117 981 371 > Steuer-Nr.: 27/541/00020 > Sitz der Gesellschaft: Hamburg > Geschäftsführende Gesellschafterin: > Bürgel Wirtschaftsinformationen Verwaltungs-GmbH > Registergericht: Hamburg HRB 45 704 > > Umfassende Informationen: Die neue Bürgel Vollauskunft. > Jetzt mit noch mehr Euler Hermes Expertise. > Informationen unter http://www.buergel.de und > http://www.buergel.de/vollauskunft > > Professionelles Forderungsmanagement für mehr Liquidität. > Debitorenmanagement, Inkasso, Forderungskauf. > Informationen unter > http://www.buergel.de/produkte-leistungen/forderungsmanagement.html > > DDMonitor - Deutscher Debitoren Monitor. > Transparenz hinsichtlich potenzieller Bonitätsrisiken innerhalb Ihres > Kundenportfolios. > Informationen unter: >
Re: Antwort: [ADSM-L] Now that I have a TS3500 - I have questions
Hi Zoltan, Add waittime=0 to your checkin command and the operator prompt goes away. Mike From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Zoltan Forray [zfor...@vcu.edu] Sent: Tuesday, May 28, 2013 9:41 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Antwort: [ADSM-L] Now that I have a TS3500 - I have questions Thanks for the suggestion. My only issue with the SEARCH=BULK is it they puts up an operator prompt requiring a reply. Is this is the way it has to be to work properly, I/the operators can live with it. On Tue, May 28, 2013 at 9:27 AM, Dierk Harbort wrote: > Hi Zoltan, > > > for checkin I would recommend to fill the I/O slots and then do "checkin > libvol search=bulk checklabel=barcode status= scratch or private>" > > I can't say anything to virtual libs > > regards > Dierk > > > |> > | Von: | > |> > > >--| > |Zoltan Forray > > | > > >--| > |> > | An:| > |> > > >--| > |ADSM-L@VM.MARIST.EDU, > > | > > >--| > |> > | Datum: | > |> > > >--| > |28.05.2013 15:17 >| > > >--| > |> > | Betreff: | > |> > > >--| > |[ADSM-L] Now that I have a TS3500 - I have questions >| > > >--| > |> > | Gesendet | > | von: | > |> > > >--| > |"ADSM: Dist Stor Manager" >| > > >--| > > > > > > Our new TS3500 was installed this weekend (replacing our 17-year old 3494) > and I have lots of questions about how things should be done/configured and > why it is doing what it is doing. > > First off, the library is configured as 2-virtual librarys, each side with > fixed drive assignments and each side managed by a separate TSM server. > > 1. Per other discussions, I configured 255 "Virtual IO". We also > configured/enabled "Insert Notification". However, some tapes keep being > inserted "unassigned" while most are properly assigned to the right > library?. Why? > > 2. What is the proper CHECKIN command options for doing mass checkins from > the IO/VIO slots?SEARCH=BULK or SEARCH=YES - CHECKLABEL=YES or > CHECKLABEL=BARCODE? The book says for a SCSI library you can't specify > SEARCH=YES and CHECKLABEL=NO > > -- > *Zoltan Forray* > TSM Software & Hardware Administrator > Virginia Commonwealth University > UCC/Office of Technology Services > zfor...@vcu.edu - 804-828-4807 > Don't be a phishing victim - VCU and other reputable organizations will > never use email to request that you reply with your password, social > security number or confidential personal information. For more details > visit http://infosecurity.vcu.edu/phishing.html > > > > Bürgel Wirtschaftsinformationen GmbH & Co. KG > Gasstraße 18 > 22761 Hamburg > > Geschäftsführer: Klaus-Jürgen Baum, Dr. Norbert Sellin, Stefan Duncker > Registergericht: Hamburg
Re: Antwort: [ADSM-L] Now that I have a TS3500 - I have questions
Hello Zoltan, Congrats! For checkin I use the following checkin libv 3584lib search=bulk checkl=barcode status=Scratch waitt=0 bulk means to check the Virtual I/O slots or entry doors. The YES option is only needed if you want to scan the entire library. With ALMS option that your library has the physical library is also keeping track of the tape locations, and sending this to the tsm server when you checkin. I would also add the waitt=0 option, so you don't have to wait the default 60 minutes, you can then check the logs for any details related to the checkin. For the split libraries that you have setup, you can assign and probably should assign a tape range associated with each virtual library. That should take care of the unassigned tapes that you are seeing. Ultimately, you should be able to insert a mix and match of volumes, and the library will assign each of those tapes to its respective virtual library. Then you run the tape checkin that assign a status of scratches to them. Take a look at the following online library settings under Cartridges -> Cartridge Assignment Policy -Nick -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Dierk Harbort Sent: Tuesday, May 28, 2013 9:28 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Antwort: [ADSM-L] Now that I have a TS3500 - I have questions Hi Zoltan, for checkin I would recommend to fill the I/O slots and then do "checkin libvol search=bulk checklabel=barcode status=" I can't say anything to virtual libs regards Dierk |> | Von: | |> >--| |Zoltan Forray | >--| |> | An:| |> >--| |ADSM-L@VM.MARIST.EDU, | >--| |> | Datum: | |> >--| |28.05.2013 15:17 | >--| |> | Betreff: | |> >--| |[ADSM-L] Now that I have a TS3500 - I have questions | >--| |> | Gesendet | | von: | |> >--| |"ADSM: Dist Stor Manager" | >--| Our new TS3500 was installed this weekend (replacing our 17-year old 3494) and I have lots of questions about how things should be done/configured and why it is doing what it is doing. First off, the library is configured as 2-virtual librarys, each side with fixed drive assignments and each side managed by a separate TSM server. 1. Per other discussions, I configured 255 "Virtual IO". We also configured/enabled "Insert Notification". However, some tapes keep being inserted "unassigned" while most are properly assigned to the right library?. Why? 2. What is the proper CHECKIN command options for doing mass checkins from the IO/VIO slots?SEARCH=BULK or SEARCH=YES - CHECKLABEL=YES or CHECKLABEL=BARCODE? The book says for a SCSI library you can't spec
Re: Antwort: [ADSM-L] Now that I have a TS3500 - I have questions
Thanks for the suggestion. My only issue with the SEARCH=BULK is it they puts up an operator prompt requiring a reply. Is this is the way it has to be to work properly, I/the operators can live with it. On Tue, May 28, 2013 at 9:27 AM, Dierk Harbort wrote: > Hi Zoltan, > > > for checkin I would recommend to fill the I/O slots and then do "checkin > libvol search=bulk checklabel=barcode status= scratch or private>" > > I can't say anything to virtual libs > > regards > Dierk > > > |> > | Von: | > |> > > >--| > |Zoltan Forray > > | > > >--| > |> > | An:| > |> > > >--| > |ADSM-L@VM.MARIST.EDU, > > | > > >--| > |> > | Datum: | > |> > > >--| > |28.05.2013 15:17 >| > > >--| > |> > | Betreff: | > |> > > >--| > |[ADSM-L] Now that I have a TS3500 - I have questions >| > > >--| > |> > | Gesendet | > | von: | > |> > > >--| > |"ADSM: Dist Stor Manager" >| > > >--| > > > > > > Our new TS3500 was installed this weekend (replacing our 17-year old 3494) > and I have lots of questions about how things should be done/configured and > why it is doing what it is doing. > > First off, the library is configured as 2-virtual librarys, each side with > fixed drive assignments and each side managed by a separate TSM server. > > 1. Per other discussions, I configured 255 "Virtual IO". We also > configured/enabled "Insert Notification". However, some tapes keep being > inserted "unassigned" while most are properly assigned to the right > library?. Why? > > 2. What is the proper CHECKIN command options for doing mass checkins from > the IO/VIO slots?SEARCH=BULK or SEARCH=YES - CHECKLABEL=YES or > CHECKLABEL=BARCODE? The book says for a SCSI library you can't specify > SEARCH=YES and CHECKLABEL=NO > > -- > *Zoltan Forray* > TSM Software & Hardware Administrator > Virginia Commonwealth University > UCC/Office of Technology Services > zfor...@vcu.edu - 804-828-4807 > Don't be a phishing victim - VCU and other reputable organizations will > never use email to request that you reply with your password, social > security number or confidential personal information. For more details > visit http://infosecurity.vcu.edu/phishing.html > > > > Bürgel Wirtschaftsinformationen GmbH & Co. KG > Gasstraße 18 > 22761 Hamburg > > Geschäftsführer: Klaus-Jürgen Baum, Dr. Norbert Sellin, Stefan Duncker > Registergericht: Hamburg HRA 85212 > USt-IdNr.: DE 117 981 371 > Steuer-Nr.: 27/541/00020 > Sitz der Gesellschaft: Hamburg > Geschäftsführende Gesellschafterin: > Bürgel Wirtschaftsinformationen Verwaltungs-GmbH > Registergericht: Hamburg HRB 45 704 > > Umfassende Informationen: Die neue Bürgel Vollauskunft. > Jetzt mit noch mehr Euler Hermes Expertise. > Informationen unter http://www.buergel.de und > http://www.buergel.de/vollauskunft > > Professionelles Forderungsmanagement für mehr Liquidität. > Debitorenmanagement, Inkasso, Forderungskauf. > Informationen unter > http://www.buergel.de/produkte-leistungen/forderungsmanagement.html > > DDMonitor - Deutscher Debitoren Monitor. > Transparenz hinsichtlich potenzieller Bonitätsrisiken innerhalb Ihres > Kundenportfolios. > Informationen unter: > > http://www.buergel.de/produkte-leistungen/wirts
Antwort: [ADSM-L] Now that I have a TS3500 - I have questions
Hi Zoltan, for checkin I would recommend to fill the I/O slots and then do "checkin libvol search=bulk checklabel=barcode status=" I can't say anything to virtual libs regards Dierk |> | Von: | |> >--| |Zoltan Forray | >--| |> | An:| |> >--| |ADSM-L@VM.MARIST.EDU, | >--| |> | Datum: | |> >--| |28.05.2013 15:17 | >--| |> | Betreff: | |> >--| |[ADSM-L] Now that I have a TS3500 - I have questions | >--| |> | Gesendet | | von: | |> >--| |"ADSM: Dist Stor Manager" | >--| Our new TS3500 was installed this weekend (replacing our 17-year old 3494) and I have lots of questions about how things should be done/configured and why it is doing what it is doing. First off, the library is configured as 2-virtual librarys, each side with fixed drive assignments and each side managed by a separate TSM server. 1. Per other discussions, I configured 255 "Virtual IO". We also configured/enabled "Insert Notification". However, some tapes keep being inserted "unassigned" while most are properly assigned to the right library?. Why? 2. What is the proper CHECKIN command options for doing mass checkins from the IO/VIO slots?SEARCH=BULK or SEARCH=YES - CHECKLABEL=YES or CHECKLABEL=BARCODE? The book says for a SCSI library you can't specify SEARCH=YES and CHECKLABEL=NO -- *Zoltan Forray* TSM Software & Hardware Administrator Virginia Commonwealth University UCC/Office of Technology Services zfor...@vcu.edu - 804-828-4807 Don't be a phishing victim - VCU and other reputable organizations will never use email to request that you reply with your password, social security number or confidential personal information. For more details visit http://infosecurity.vcu.edu/phishing.html Bürgel Wirtschaftsinformationen GmbH & Co. KG Gasstraße 18 22761 Hamburg Geschäftsführer: Klaus-Jürgen Baum, Dr. Norbert Sellin, Stefan Duncker Registergericht: Hamburg HRA 85212 USt-IdNr.: DE 117 981 371 Steuer-Nr.: 27/541/00020 Sitz der Gesellschaft: Hamburg Geschäftsführende Gesellschafterin: Bürgel Wirtschaftsinformationen Verwaltungs-GmbH Registergericht: Hamburg HRB 45 704 Umfassende Informationen: Die neue Bürgel Vollauskunft. Jetzt mit noch mehr Euler Hermes Expertise. Informationen unter http://www.buergel.de und http://www.buergel.de/vollauskunft Professionelles Forderungsmanagement für mehr Liquidität. Debitorenmanagement, Inkasso, Forderungskauf. Informationen unter http://www.buergel.de/produkte-leistungen/forderungsmanagement.html DDMonitor - Deutscher Debitoren Monitor. Transparenz hinsichtlich potenzieller Bonitätsrisiken innerhalb Ihres Kundenportfolios. Informationen unter: http://www.buergel.de/produkte-leistungen/wirtschaftsinformationen/ddmonitor.html BÜRGEL Wirtschaftsinformationen seit 1885
