Re: Can't Restore on CIFS/DFS backup server yet can backup
Hi Zoltan, sure. Andy Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com IBM Tivoli Storage Manager links: Product support: https://www.ibm.com/support/entry/portal/product/tivoli/tivoli_storage_manager Online documentation: http://www.ibm.com/support/knowledgecenter/SSGSG7/landing/welcome_ssgsg7.html Product Wiki: https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli%20Storage%20Manager "ADSM: Dist Stor Manager" wrote on 2016-11-17 15:19:16: > From: Zoltan Forray > To: ADSM-L@VM.MARIST.EDU > Date: 2016-11-17 15:20 > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > Sent by: "ADSM: Dist Stor Manager" > > Andy, > > My attempt to post a reply failed due to the attachment. Can I email you > directly to discuss this problem further? > > On Thu, Nov 17, 2016 at 12:26 PM, Andrew Raibeck wrote: > > > Zoltan, > > > > > Can we assume it applies to the Web interface as well, since that is what > > > is being used - not the GUI? > > > > Yes. > > > > Andy > > > > > > > > > > Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com > > > > IBM Tivoli Storage Manager links: > > Product support: > > https://www.ibm.com/support/entry/portal/product/tivoli/ > > tivoli_storage_manager > > > > Online documentation: > > http://www.ibm.com/support/knowledgecenter/SSGSG7/ > > landing/welcome_ssgsg7.html > > > > Product Wiki: > > https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli% > > 20Storage%20Manager > > > > "ADSM: Dist Stor Manager" wrote on 2016-11-17 > > 11:33:25: > > > > > From: Zoltan Forray > > > To: ADSM-L@VM.MARIST.EDU > > > Date: 2016-11-17 11:34 > > > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > > > Sent by: "ADSM: Dist Stor Manager" > > > > > > Andy, > > > > > > The APAR description says "IBM Tivoli Storage Manager *client GUI* cannot > > > display files which were backed up in a directory tree, when a mount > > point > > > was created as an underlying directory name." > > > > > > Can we assume it applies to the Web interface as well, since that is what > > > is being used - not the GUI? > > > > > > On Thu, Nov 17, 2016 at 11:04 AM, Andrew Raibeck > > wrote: > > > > > > > Hi Zoltan, > > > > > > > > Does this APAR possibly match your issue? > > > > > > > > http://www.ibm.com/support/docview.wss?uid=swg1IC72016 > > > > > > > > Regards, > > > > > > > > Andy > > > > > > > > > > > > > > > > > > > > Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com > > > > > > > > IBM Tivoli Storage Manager links: > > > > Product support: > > > > https://www.ibm.com/support/entry/portal/product/tivoli/ > > > > tivoli_storage_manager > > > > > > > > Online documentation: > > > > http://www.ibm.com/support/knowledgecenter/SSGSG7/ > > > > landing/welcome_ssgsg7.html > > > > > > > > Product Wiki: > > > > https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli% > > > > 20Storage%20Manager > > > > > > > > "ADSM: Dist Stor Manager" wrote on 2016-11-17 > > > > 10:46:11: > > > > > > > > > From: Zoltan Forray > > > > > To: ADSM-L@VM.MARIST.EDU > > > > > Date: 2016-11-17 10:47 > > > > > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > > > > > Sent by: "ADSM: Dist Stor Manager" > > > > > > > > > > You are mostly correct in your understanding of our configuration. > > Let > > > > see > > > > > if this helps. > > > > > > > > > > We have a server called TSMCIFS3. It has access/mount points to > > numerous > > > > > CIFS and now DFS storage/directories/mount points/shares, whatever > > you > > > > want > > > > > to call them. > > > > > The TSM software on this server is used to backup
Re: Can't Restore on CIFS/DFS backup server yet can backup
Andy, My attempt to post a reply failed due to the attachment. Can I email you directly to discuss this problem further? On Thu, Nov 17, 2016 at 12:26 PM, Andrew Raibeck wrote: > Zoltan, > > > Can we assume it applies to the Web interface as well, since that is what > > is being used - not the GUI? > > Yes. > > Andy > > > > > Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com > > IBM Tivoli Storage Manager links: > Product support: > https://www.ibm.com/support/entry/portal/product/tivoli/ > tivoli_storage_manager > > Online documentation: > http://www.ibm.com/support/knowledgecenter/SSGSG7/ > landing/welcome_ssgsg7.html > > Product Wiki: > https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli% > 20Storage%20Manager > > "ADSM: Dist Stor Manager" wrote on 2016-11-17 > 11:33:25: > > > From: Zoltan Forray > > To: ADSM-L@VM.MARIST.EDU > > Date: 2016-11-17 11:34 > > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > > Sent by: "ADSM: Dist Stor Manager" > > > > Andy, > > > > The APAR description says "IBM Tivoli Storage Manager *client GUI* cannot > > display files which were backed up in a directory tree, when a mount > point > > was created as an underlying directory name." > > > > Can we assume it applies to the Web interface as well, since that is what > > is being used - not the GUI? > > > > On Thu, Nov 17, 2016 at 11:04 AM, Andrew Raibeck > wrote: > > > > > Hi Zoltan, > > > > > > Does this APAR possibly match your issue? > > > > > > http://www.ibm.com/support/docview.wss?uid=swg1IC72016 > > > > > > Regards, > > > > > > Andy > > > > > > > > > > > > > > > Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com > > > > > > IBM Tivoli Storage Manager links: > > > Product support: > > > https://www.ibm.com/support/entry/portal/product/tivoli/ > > > tivoli_storage_manager > > > > > > Online documentation: > > > http://www.ibm.com/support/knowledgecenter/SSGSG7/ > > > landing/welcome_ssgsg7.html > > > > > > Product Wiki: > > > https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli% > > > 20Storage%20Manager > > > > > > "ADSM: Dist Stor Manager" wrote on 2016-11-17 > > > 10:46:11: > > > > > > > From: Zoltan Forray > > > > To: ADSM-L@VM.MARIST.EDU > > > > Date: 2016-11-17 10:47 > > > > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > > > > Sent by: "ADSM: Dist Stor Manager" > > > > > > > > You are mostly correct in your understanding of our configuration. > Let > > > see > > > > if this helps. > > > > > > > > We have a server called TSMCIFS3. It has access/mount points to > numerous > > > > CIFS and now DFS storage/directories/mount points/shares, whatever > you > > > want > > > > to call them. > > > > The TSM software on this server is used to backup everything but the > > > local > > > > box since it/the local boxes has nothing on it worth backing up. It > is > > > > purely a service machine. > > > > Each TSM node configured on this box (>30) has its own configuration > > > files > > > > (dsmsched, dsm.opt, etc) which includes unique http ports for each > node. > > > > User/admins access their backups for their nodes via dsmcad/http. > > > > Each node has a unique set of services and yes those services are > > > > configured to use specific domain accounts to perform the backups for > > > each > > > > node. > > > > The backup schedules for each of these nodes has the OBJECT value set > to > > > > determine which mount point/share/filesystem/directory is backed up. > > > > > > > > Yes I agree I think it is an authority issue. However, our confusion > is > > > if > > > > the ID associated with the node can see and backup what it needs to > > > > see/access, why can't the restore function see the same? > > > > > > > > > > > > On Thu, Nov 17, 2016 at 10:24 AM, Robert Talda > wrote:
Re: Can't Restore on CIFS/DFS backup server yet can backup
Zoltan, > Can we assume it applies to the Web interface as well, since that is what > is being used - not the GUI? Yes. Andy Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com IBM Tivoli Storage Manager links: Product support: https://www.ibm.com/support/entry/portal/product/tivoli/tivoli_storage_manager Online documentation: http://www.ibm.com/support/knowledgecenter/SSGSG7/landing/welcome_ssgsg7.html Product Wiki: https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli%20Storage%20Manager "ADSM: Dist Stor Manager" wrote on 2016-11-17 11:33:25: > From: Zoltan Forray > To: ADSM-L@VM.MARIST.EDU > Date: 2016-11-17 11:34 > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > Sent by: "ADSM: Dist Stor Manager" > > Andy, > > The APAR description says "IBM Tivoli Storage Manager *client GUI* cannot > display files which were backed up in a directory tree, when a mount point > was created as an underlying directory name." > > Can we assume it applies to the Web interface as well, since that is what > is being used - not the GUI? > > On Thu, Nov 17, 2016 at 11:04 AM, Andrew Raibeck wrote: > > > Hi Zoltan, > > > > Does this APAR possibly match your issue? > > > > http://www.ibm.com/support/docview.wss?uid=swg1IC72016 > > > > Regards, > > > > Andy > > > > > > > > > > Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com > > > > IBM Tivoli Storage Manager links: > > Product support: > > https://www.ibm.com/support/entry/portal/product/tivoli/ > > tivoli_storage_manager > > > > Online documentation: > > http://www.ibm.com/support/knowledgecenter/SSGSG7/ > > landing/welcome_ssgsg7.html > > > > Product Wiki: > > https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli% > > 20Storage%20Manager > > > > "ADSM: Dist Stor Manager" wrote on 2016-11-17 > > 10:46:11: > > > > > From: Zoltan Forray > > > To: ADSM-L@VM.MARIST.EDU > > > Date: 2016-11-17 10:47 > > > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > > > Sent by: "ADSM: Dist Stor Manager" > > > > > > You are mostly correct in your understanding of our configuration. Let > > see > > > if this helps. > > > > > > We have a server called TSMCIFS3. It has access/mount points to numerous > > > CIFS and now DFS storage/directories/mount points/shares, whatever you > > want > > > to call them. > > > The TSM software on this server is used to backup everything but the > > local > > > box since it/the local boxes has nothing on it worth backing up. It is > > > purely a service machine. > > > Each TSM node configured on this box (>30) has its own configuration > > files > > > (dsmsched, dsm.opt, etc) which includes unique http ports for each node. > > > User/admins access their backups for their nodes via dsmcad/http. > > > Each node has a unique set of services and yes those services are > > > configured to use specific domain accounts to perform the backups for > > each > > > node. > > > The backup schedules for each of these nodes has the OBJECT value set to > > > determine which mount point/share/filesystem/directory is backed up. > > > > > > Yes I agree I think it is an authority issue. However, our confusion is > > if > > > the ID associated with the node can see and backup what it needs to > > > see/access, why can't the restore function see the same? > > > > > > > > > On Thu, Nov 17, 2016 at 10:24 AM, Robert Talda wrote: > > > > > > > Zoltan: > > > > Okay, I’m getting mixed messages from your post. So my answer may be > > of > > > > limited value. > > > > > > > > “Signing in via browser” implies to me you are using the Web client - > > am > > > > I correct? > > > > > > > > Assuming so, > > > > - BACKUP is looking at the local filesystems - not the information from > > > > the TSM Server > > > > - RESTORE would be looking at the information from the TSM Server. > > > > > > > > Based on that, I suspect it may be the id you are using to sign on > > via > > > > the Web client. > > > > &
Re: Can't Restore on CIFS/DFS backup server yet can backup
Andy, The APAR description says "IBM Tivoli Storage Manager *client GUI* cannot display files which were backed up in a directory tree, when a mount point was created as an underlying directory name." Can we assume it applies to the Web interface as well, since that is what is being used - not the GUI? On Thu, Nov 17, 2016 at 11:04 AM, Andrew Raibeck wrote: > Hi Zoltan, > > Does this APAR possibly match your issue? > > http://www.ibm.com/support/docview.wss?uid=swg1IC72016 > > Regards, > > Andy > > > > > Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com > > IBM Tivoli Storage Manager links: > Product support: > https://www.ibm.com/support/entry/portal/product/tivoli/ > tivoli_storage_manager > > Online documentation: > http://www.ibm.com/support/knowledgecenter/SSGSG7/ > landing/welcome_ssgsg7.html > > Product Wiki: > https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli% > 20Storage%20Manager > > "ADSM: Dist Stor Manager" wrote on 2016-11-17 > 10:46:11: > > > From: Zoltan Forray > > To: ADSM-L@VM.MARIST.EDU > > Date: 2016-11-17 10:47 > > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > > Sent by: "ADSM: Dist Stor Manager" > > > > You are mostly correct in your understanding of our configuration. Let > see > > if this helps. > > > > We have a server called TSMCIFS3. It has access/mount points to numerous > > CIFS and now DFS storage/directories/mount points/shares, whatever you > want > > to call them. > > The TSM software on this server is used to backup everything but the > local > > box since it/the local boxes has nothing on it worth backing up. It is > > purely a service machine. > > Each TSM node configured on this box (>30) has its own configuration > files > > (dsmsched, dsm.opt, etc) which includes unique http ports for each node. > > User/admins access their backups for their nodes via dsmcad/http. > > Each node has a unique set of services and yes those services are > > configured to use specific domain accounts to perform the backups for > each > > node. > > The backup schedules for each of these nodes has the OBJECT value set to > > determine which mount point/share/filesystem/directory is backed up. > > > > Yes I agree I think it is an authority issue. However, our confusion is > if > > the ID associated with the node can see and backup what it needs to > > see/access, why can't the restore function see the same? > > > > > > On Thu, Nov 17, 2016 at 10:24 AM, Robert Talda wrote: > > > > > Zoltan: > > > Okay, I’m getting mixed messages from your post. So my answer may be > of > > > limited value. > > > > > > “Signing in via browser” implies to me you are using the Web client - > am > > > I correct? > > > > > > Assuming so, > > > - BACKUP is looking at the local filesystems - not the information from > > > the TSM Server > > > - RESTORE would be looking at the information from the TSM Server. > > > > > > Based on that, I suspect it may be the id you are using to sign on > via > > > the Web client. > > > > > > FWIW, > > > Bob T > > > > > > > > > Robert Talda > > > EZ-Backup Systems Engineer > > > Cornell University > > > +1 607-255-8280 > > > r...@cornell.edu > > > > > > > > > > On Nov 16, 2016, at 2:19 PM, Zoltan Forray wrote: > > > > > > > > I have an interesting situation when attempting to perform a restore > on a > > > > node that performs backups of CIFS/DFS mounts. > > > > > > > > The client is accessed via http / dsmcad since this server is setup > to > > > > backup multiple CIFS shares and now moving to DFS. > > > > > > > > After signing in via browser, I can bring up BACKUP and see lots and > lots > > > > of file shares/directories, etc. > > > > > > > > But when I bring up RESTORE, I don't see any of that. Just three > > > > higher-level directories. > > > > > > > > Occupancy shows 4.7-million files backed up and yes I tried toggling > > > > active/inactive. Checking the dsmsched log shows it scanning 4.7 > million > > > > files and backed up 1300 just last night. > > > > > > > > Both the client and server are 7.1.6.3 so
Re: Can't Restore on CIFS/DFS backup server yet can backup
Hi Zoltan, Does this APAR possibly match your issue? http://www.ibm.com/support/docview.wss?uid=swg1IC72016 Regards, Andy Andrew Raibeck | IBM Spectrum Protect Level 3 | stor...@us.ibm.com IBM Tivoli Storage Manager links: Product support: https://www.ibm.com/support/entry/portal/product/tivoli/tivoli_storage_manager Online documentation: http://www.ibm.com/support/knowledgecenter/SSGSG7/landing/welcome_ssgsg7.html Product Wiki: https://www.ibm.com/developerworks/community/wikis/home/wiki/Tivoli%20Storage%20Manager "ADSM: Dist Stor Manager" wrote on 2016-11-17 10:46:11: > From: Zoltan Forray > To: ADSM-L@VM.MARIST.EDU > Date: 2016-11-17 10:47 > Subject: Re: Can't Restore on CIFS/DFS backup server yet can backup > Sent by: "ADSM: Dist Stor Manager" > > You are mostly correct in your understanding of our configuration. Let see > if this helps. > > We have a server called TSMCIFS3. It has access/mount points to numerous > CIFS and now DFS storage/directories/mount points/shares, whatever you want > to call them. > The TSM software on this server is used to backup everything but the local > box since it/the local boxes has nothing on it worth backing up. It is > purely a service machine. > Each TSM node configured on this box (>30) has its own configuration files > (dsmsched, dsm.opt, etc) which includes unique http ports for each node. > User/admins access their backups for their nodes via dsmcad/http. > Each node has a unique set of services and yes those services are > configured to use specific domain accounts to perform the backups for each > node. > The backup schedules for each of these nodes has the OBJECT value set to > determine which mount point/share/filesystem/directory is backed up. > > Yes I agree I think it is an authority issue. However, our confusion is if > the ID associated with the node can see and backup what it needs to > see/access, why can't the restore function see the same? > > > On Thu, Nov 17, 2016 at 10:24 AM, Robert Talda wrote: > > > Zoltan: > > Okay, I’m getting mixed messages from your post. So my answer may be of > > limited value. > > > > “Signing in via browser” implies to me you are using the Web client - am > > I correct? > > > > Assuming so, > > - BACKUP is looking at the local filesystems - not the information from > > the TSM Server > > - RESTORE would be looking at the information from the TSM Server. > > > > Based on that, I suspect it may be the id you are using to sign on via > > the Web client. > > > > FWIW, > > Bob T > > > > > > Robert Talda > > EZ-Backup Systems Engineer > > Cornell University > > +1 607-255-8280 > > r...@cornell.edu > > > > > > > On Nov 16, 2016, at 2:19 PM, Zoltan Forray wrote: > > > > > > I have an interesting situation when attempting to perform a restore on a > > > node that performs backups of CIFS/DFS mounts. > > > > > > The client is accessed via http / dsmcad since this server is setup to > > > backup multiple CIFS shares and now moving to DFS. > > > > > > After signing in via browser, I can bring up BACKUP and see lots and lots > > > of file shares/directories, etc. > > > > > > But when I bring up RESTORE, I don't see any of that. Just three > > > higher-level directories. > > > > > > Occupancy shows 4.7-million files backed up and yes I tried toggling > > > active/inactive. Checking the dsmsched log shows it scanning 4.7 million > > > files and backed up 1300 just last night. > > > > > > Both the client and server are 7.1.6.3 so I can't go any higher. > > > > > > Recently rebooted everything. Nothing out of the ordinary in > > > dsmwebcl.log. Just shows sessions starting and there was a password > > issue > > > for the user who contacted me about this. Even shows idle-timeouts. > > > > > > So what gives? Why can't restore/see anything? Obviously, I am a full > > > system admin so that's not be an issue. > > > > > > > > > > > > > > > > > > -- > > > *Zoltan Forray* > > > Spectrum Protect (p.k.a. TSM) Software & Hardware Administrator > > > Xymon Monitor Administrator > > > VMware Administrator (in training) > > > Virginia Commonwealth University > > > UCC/Office of Technology Services > > > www.ucc.vcu.edu > > > zfor...@vcu.edu - 804-828-4807 > > > Don&
Re: Can't Restore on CIFS/DFS backup server yet can backup
You are mostly correct in your understanding of our configuration. Let see if this helps. We have a server called TSMCIFS3. It has access/mount points to numerous CIFS and now DFS storage/directories/mount points/shares, whatever you want to call them. The TSM software on this server is used to backup everything but the local box since it/the local boxes has nothing on it worth backing up. It is purely a service machine. Each TSM node configured on this box (>30) has its own configuration files (dsmsched, dsm.opt, etc) which includes unique http ports for each node. User/admins access their backups for their nodes via dsmcad/http. Each node has a unique set of services and yes those services are configured to use specific domain accounts to perform the backups for each node. The backup schedules for each of these nodes has the OBJECT value set to determine which mount point/share/filesystem/directory is backed up. Yes I agree I think it is an authority issue. However, our confusion is if the ID associated with the node can see and backup what it needs to see/access, why can't the restore function see the same? On Thu, Nov 17, 2016 at 10:24 AM, Robert Talda wrote: > Zoltan: > Okay, I’m getting mixed messages from your post. So my answer may be of > limited value. > > “Signing in via browser” implies to me you are using the Web client - am > I correct? > > Assuming so, > - BACKUP is looking at the local filesystems - not the information from > the TSM Server > - RESTORE would be looking at the information from the TSM Server. > > Based on that, I suspect it may be the id you are using to sign on via > the Web client. > > FWIW, > Bob T > > > Robert Talda > EZ-Backup Systems Engineer > Cornell University > +1 607-255-8280 > r...@cornell.edu > > > > On Nov 16, 2016, at 2:19 PM, Zoltan Forray wrote: > > > > I have an interesting situation when attempting to perform a restore on a > > node that performs backups of CIFS/DFS mounts. > > > > The client is accessed via http / dsmcad since this server is setup to > > backup multiple CIFS shares and now moving to DFS. > > > > After signing in via browser, I can bring up BACKUP and see lots and lots > > of file shares/directories, etc. > > > > But when I bring up RESTORE, I don't see any of that. Just three > > higher-level directories. > > > > Occupancy shows 4.7-million files backed up and yes I tried toggling > > active/inactive. Checking the dsmsched log shows it scanning 4.7 million > > files and backed up 1300 just last night. > > > > Both the client and server are 7.1.6.3 so I can't go any higher. > > > > Recently rebooted everything. Nothing out of the ordinary in > > dsmwebcl.log. Just shows sessions starting and there was a password > issue > > for the user who contacted me about this. Even shows idle-timeouts. > > > > So what gives? Why can't restore/see anything? Obviously, I am a full > > system admin so that's not be an issue. > > > > > > > > > > > > -- > > *Zoltan Forray* > > Spectrum Protect (p.k.a. TSM) Software & Hardware Administrator > > Xymon Monitor Administrator > > VMware Administrator (in training) > > Virginia Commonwealth University > > UCC/Office of Technology Services > > www.ucc.vcu.edu > > zfor...@vcu.edu - 804-828-4807 > > Don't be a phishing victim - VCU and other reputable organizations will > > never use email to request that you reply with your password, social > > security number or confidential personal information. For more details > > visit http://infosecurity.vcu.edu/phishing.html > > -- *Zoltan Forray* Spectrum Protect (p.k.a. TSM) Software & Hardware Administrator Xymon Monitor Administrator VMware Administrator (in training) Virginia Commonwealth University UCC/Office of Technology Services www.ucc.vcu.edu zfor...@vcu.edu - 804-828-4807 Don't be a phishing victim - VCU and other reputable organizations will never use email to request that you reply with your password, social security number or confidential personal information. For more details visit http://infosecurity.vcu.edu/phishing.html
Re: Can't Restore on CIFS/DFS backup server yet can backup
Zoltan: Okay, I’m getting mixed messages from your post. So my answer may be of limited value. “Signing in via browser” implies to me you are using the Web client - am I correct? Assuming so, - BACKUP is looking at the local filesystems - not the information from the TSM Server - RESTORE would be looking at the information from the TSM Server. Based on that, I suspect it may be the id you are using to sign on via the Web client. FWIW, Bob T Robert Talda EZ-Backup Systems Engineer Cornell University +1 607-255-8280 r...@cornell.edu > On Nov 16, 2016, at 2:19 PM, Zoltan Forray wrote: > > I have an interesting situation when attempting to perform a restore on a > node that performs backups of CIFS/DFS mounts. > > The client is accessed via http / dsmcad since this server is setup to > backup multiple CIFS shares and now moving to DFS. > > After signing in via browser, I can bring up BACKUP and see lots and lots > of file shares/directories, etc. > > But when I bring up RESTORE, I don't see any of that. Just three > higher-level directories. > > Occupancy shows 4.7-million files backed up and yes I tried toggling > active/inactive. Checking the dsmsched log shows it scanning 4.7 million > files and backed up 1300 just last night. > > Both the client and server are 7.1.6.3 so I can't go any higher. > > Recently rebooted everything. Nothing out of the ordinary in > dsmwebcl.log. Just shows sessions starting and there was a password issue > for the user who contacted me about this. Even shows idle-timeouts. > > So what gives? Why can't restore/see anything? Obviously, I am a full > system admin so that's not be an issue. > > > > > > -- > *Zoltan Forray* > Spectrum Protect (p.k.a. TSM) Software & Hardware Administrator > Xymon Monitor Administrator > VMware Administrator (in training) > Virginia Commonwealth University > UCC/Office of Technology Services > www.ucc.vcu.edu > zfor...@vcu.edu - 804-828-4807 > Don't be a phishing victim - VCU and other reputable organizations will > never use email to request that you reply with your password, social > security number or confidential personal information. For more details > visit http://infosecurity.vcu.edu/phishing.html
Can't Restore on CIFS/DFS backup server yet can backup
I have an interesting situation when attempting to perform a restore on a node that performs backups of CIFS/DFS mounts. The client is accessed via http / dsmcad since this server is setup to backup multiple CIFS shares and now moving to DFS. After signing in via browser, I can bring up BACKUP and see lots and lots of file shares/directories, etc. But when I bring up RESTORE, I don't see any of that. Just three higher-level directories. Occupancy shows 4.7-million files backed up and yes I tried toggling active/inactive. Checking the dsmsched log shows it scanning 4.7 million files and backed up 1300 just last night. Both the client and server are 7.1.6.3 so I can't go any higher. Recently rebooted everything. Nothing out of the ordinary in dsmwebcl.log. Just shows sessions starting and there was a password issue for the user who contacted me about this. Even shows idle-timeouts. So what gives? Why can't restore/see anything? Obviously, I am a full system admin so that's not be an issue. -- *Zoltan Forray* Spectrum Protect (p.k.a. TSM) Software & Hardware Administrator Xymon Monitor Administrator VMware Administrator (in training) Virginia Commonwealth University UCC/Office of Technology Services www.ucc.vcu.edu zfor...@vcu.edu - 804-828-4807 Don't be a phishing victim - VCU and other reputable organizations will never use email to request that you reply with your password, social security number or confidential personal information. For more details visit http://infosecurity.vcu.edu/phishing.html
