Re: Need help defining SL500 Tape library to TSM Server running
That's exactly what the problem was. Since we only ever had a 3494 library before, we never needed the TSM Device driver so it was never installed before. After installing it, the library was recognized and I was able to define it to TSM. John -John, -If I'm not mistaken, the TSM device driver must be used to address the -robot controller in the STK library: -Smitty -Devices -Tivoli Storage Manager Devices -Best regards, -Kurt -Oorspronkelijk bericht- Van: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Namens John C Dury Verzonden: donderdag 24 januari 2008 20:36 Aan: ADSM-L AT VM.MARIST DOT EDU Onderwerp: [ADSM-L] Need help defining SL500 Tape library to TSM Server running under AIX We have a new SL500 that we are going to use to replace our existing 3494 library. I have the 4 LTO4 drives and the tape controller in the SL500 zoned in the brocade swtich so that the AIX box where the TSM server is running can see all the drives and the controller. After running 'cfgmgr' I can see the 4 tape drives in TSM but I can not see the SL500 controller. I have the ATAPE and ATLDD drivers installed (v10.7.3.0 and v6.5.5.0 respectively). What is it I need to do to get AIX to see the SL500 controller and then what type of library do I define the SL500 to TSM as? (SCSI,manual etc). I have yet to find any documentation on this anywhere and also I called STK/Sun support and they were pretty much no help at all. ''cfgmgr' gives an error after running saying that 'devices.fcp.changer' is not installed although I think from reading problems other people have had, this is a generic error. Any help anyone can provide would be great! AIX 5.3 TSM 5.5 *** Disclaimer *** Vlaamse Radio- en Televisieomroep Auguste Reyerslaan 52, 1043 Brussel nv van publiek recht BTW BE 0244.142.664 RPR Brussel http://www.vrt.be/disclaimer
Re: Need help defining SL500 Tape library to TSM Server running under AIX
. I assume you have seen this already for the SL500 library: StorageTek SL500 and Sun StorEdge L500 Libraries Configuration Information for IBM Tivoli Storage Manager Server http://www-1.ibm.com/support/docview.wss?rs=663uid=swg21193518 Roger Deschner University of Illinois at Chicago [EMAIL PROTECTED] On Thu, 24 Jan 2008, John C Dury wrote: library. I have the 4 LTO4 drives and the tape controller in the SL500 zoned in the brocade swtich so that the AIX box where the TSM server is running can see all the drives and the controller. After running 'cfgmgr' I can see the 4 tape drives in TSM but I can not see the SL500 controller. I have the ATAPE and ATLDD drivers installed (v10.7.3.0 and v6.5.5.0 respectively). What is it I need to do to get AIX to see the SL500 controller and then what type of library do I define the SL500 to TSM as? (SCSI,manual etc). I have yet to find any documentation on this anywhere and also I called STK/Sun support and they were pretty much no help at all. ''cfgmgr' gives an error after running saying that 'devices.fcp.changer' is not installed although I think from reading problems other people have had, this is a generic error. Any help anyone can provide would be great! AIX 5.3 TSM 5.5
Need help defining SL500 Tape library to TSM Server running under AIX
We have a new SL500 that we are going to use to replace our existing 3494 library. I have the 4 LTO4 drives and the tape controller in the SL500 zoned in the brocade swtich so that the AIX box where the TSM server is running can see all the drives and the controller. After running 'cfgmgr' I can see the 4 tape drives in TSM but I can not see the SL500 controller. I have the ATAPE and ATLDD drivers installed (v10.7.3.0 and v6.5.5.0 respectively). What is it I need to do to get AIX to see the SL500 controller and then what type of library do I define the SL500 to TSM as? (SCSI,manual etc). I have yet to find any documentation on this anywhere and also I called STK/Sun support and they were pretty much no help at all. ''cfgmgr' gives an error after running saying that 'devices.fcp.changer' is not installed although I think from reading problems other people have had, this is a generic error. Any help anyone can provide would be great! AIX 5.3 TSM 5.5
Re: Need help defining SL500 Tape library to TSM Server running under AIX
John, If I'm not mistaken, the TSM device driver must be used to address the robot controller in the STK library: Smitty Devices Tivoli Storage Manager Devices Best regards, Kurt -Oorspronkelijk bericht- Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens John C Dury Verzonden: donderdag 24 januari 2008 20:36 Aan: ADSM-L@VM.MARIST.EDU Onderwerp: [ADSM-L] Need help defining SL500 Tape library to TSM Server running under AIX We have a new SL500 that we are going to use to replace our existing 3494 library. I have the 4 LTO4 drives and the tape controller in the SL500 zoned in the brocade swtich so that the AIX box where the TSM server is running can see all the drives and the controller. After running 'cfgmgr' I can see the 4 tape drives in TSM but I can not see the SL500 controller. I have the ATAPE and ATLDD drivers installed (v10.7.3.0 and v6.5.5.0 respectively). What is it I need to do to get AIX to see the SL500 controller and then what type of library do I define the SL500 to TSM as? (SCSI,manual etc). I have yet to find any documentation on this anywhere and also I called STK/Sun support and they were pretty much no help at all. ''cfgmgr' gives an error after running saying that 'devices.fcp.changer' is not installed although I think from reading problems other people have had, this is a generic error. Any help anyone can provide would be great! AIX 5.3 TSM 5.5 *** Disclaimer *** Vlaamse Radio- en Televisieomroep Auguste Reyerslaan 52, 1043 Brussel nv van publiek recht BTW BE 0244.142.664 RPR Brussel http://www.vrt.be/disclaimer