Re: 1501?
'' Port numbers are not restricted to four digits, or to any specific number. The clients manual describes their specification. '' Just to pick bones, 'cause this just confused someone here, port numbers can go from 0-65535, although I'm not sure if 0 is actually valid. ___ Disclaimer Notice __ This message and any attachments are confidential and should only be read by those to whom they are addressed. If you are not the intended recipient, please contact us, delete the message from your computer and destroy any copies. Any distribution or copying without our prior permission is prohibited. Internet communications are not always secure and therefore Powergen Retail Limited does not accept legal responsibility for this message. The recipient is responsible for verifying its authenticity before acting on the contents. Any views or opinions presented are solely those of the author and do not necessarily represent those of Powergen Retail Limited. Registered addresses: Powergen Retail Limited, Westwood Way, Westwood Business Park, Coventry, CV4 8LG. Registered in England and Wales No: 3407430 Telephone +44 (0) 2476 42 4000 Fax +44 (0) 2476 42 5432
Re: 1501?
Just to pick bones, 'cause this just confused someone here, port numbers can go from 0-65535, although I'm not sure if 0 is actually valid. Indeed so. Port numbers also have certain assigned meanings over the Internet, though within the context of a customer computing environment numbers above 1023 may particularly be used as needed. See: http://www.iana.org/assignments/port-numbers for defined port numbers. (Note that ADSM/TSM does not formally define any for itself in the world scope of things. Indeed, TSM's customary port numbers, such as 1501, are internationally defined for other purposes. In unusual contexts, this may cause a non-TSM application to attempt interact with a TSM server on a given port, resulting in an interesting protocol mismatch. Hopefully, such an application would not keep trying.) Richard Sims
Re: 1501?
On Friday, Jul 9, 2004, at 00:09 Australia/Sydney, Warren, Matthew (Retail) wrote: '' Port numbers are not restricted to four digits, or to any specific number. The clients manual describes their specification. '' Just to pick bones, 'cause this just confused someone here, port numbers can go from 0-65535, although I'm not sure if 0 is actually valid. FYA (For Your Amusement): I don't think port 0 is supposed to be valid, but I have seen it used, UCX 3.x appeared to allow its use, and I tripped over a [badly written] application using TCP port 0 running on and old VAX. Needless to say, it broke after a UCX upgrade :) Cheers, -- Paul Ripke Unix/OpenVMS/TSM/DBA I love deadlines. I like the whooshing sound they make as they fly by. -- Douglas Adams
Re: 1501?
I asked the same question less than a month ago. They ARE the TCPIP PORT numbers. Yes, TSM will use high numbers (5-digits) as will many other products that want to stay out of the way of other products (for an example you can relate to, iManager on a Netware server uses port 51443 by default). Port 1501 is what the TSM server uses, by default, to contact the TSM clients, per this paragraph from the TSM Netware Client book, discussing the TCPCLIENTPORT parm: client_port_address - Specifies the TCP/IP port address you want the server to use to contact your client node. The range of values is 1000 through 32767; the default is 1501. FWIW, when doing port blocking/filtering, 1500 1501 should be open to allow TSM through, both directions. Timothy Hughes [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 07/01/2004 01:26 PM Please respond to ADSM: Dist Stor Manager [EMAIL PROTECTED] To [EMAIL PROTECTED] cc Subject 1501? Hello, What does the four-digits represent at the end of the Nodes IP? is that the port it's trying to reach? I have notice other four digit numbers that are not ports and mean nothing and five digits numbers so I assume they mean nothing. Thanks for any responses! ANR2716E Schedule prompter was not able to contact client BRUTIS using type 1 (xxx.xx.xx.xx 1501). 07/01/04 00:00:40 ANR2716E Schedule prompter was not able to contact client DAFFY using type 1 (xxx.xx.xx.xx 1501). 07/01/04 00:06:36 ANR2716E Schedule prompter was not able to contact client Pluto using type 1 (xxx.xx.xx.xx 1501). 07/01/04 00:06:40 ANR2716E Schedule prompter was not able to contact client DONALD using type 1 (xxx.xx.xx.xx 1501). 07/01/04 00:06:40 ANR2716E Schedule prompter was not able to contact client ARCHIE using type 1 (xxx.xx.xx.xx 1501). 07/01/04 00:06:40 ANR2716E Schedule prompter was not able to contact client YOGI using type 1 (xxx.xx.xx.xx 1501). 07/01/04 00:06:40 ANR2716E Schedule prompter was not able to contact client VENUS using type 1 (xxx.xx.xxx.xx 1501). 07/01/04 00:06:40 ANR2716E Schedule prompter was not able to contact client JERRY using type 1 (xxx.xx.xx.xxx 1501). 07/01/04 00:06:40 ANR2716E Schedule prompter was not able to contact client BARNEY using type 1 (xxx.xx.xx.xxx 1501).
Re: 1501?
What does the four-digits represent at the end of the Nodes IP? is that the port it's trying to reach? I have notice other four digit numbers that are not ports and mean nothing and five digits numbers so I assume they mean nothing. Thanks for any responses! ANR2716E Schedule prompter was not able to contact client BRUTIS using type 1 (xxx.xx.xx.xx 1501). 07/01/04 00:00:40 ANR2716E Schedule prompter was not able to contact client DAFFY using type 1 (xxx.xx.xx.xx 1501). The Messages manual describes the number as the low address. If you look in the Admin Ref manual, under Register Node, you will see that the low address in less generic terms is the network port number, where 1501 is the client port number for accepting scheduled events from the TSM server. Port numbers are not restricted to four digits, or to any specific number. The clients manual describes their specification. Richard Sims
Re: 1501?
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Zoltan Forray/AC/VCU FWIW, when doing port blocking/filtering, 1500 1501 should be open to allow TSM through, both directions. pedantic_mode From page 21 of the _Backup-Archive Clients Installation and User's Guide for Windows, Version 5 Release 2_: For the client scheduler [set] in prompted mode, it is unnecessary to open any ports on the firewall. If you set the sessioninitiation option to serveronly, the client will not attempt to contact the server. All sessions will be initiated by server prompted scheduling on the port defined on the client with the tcpclientport option. The sessioninitiation option only affects the behavior of the client scheduler running in the prompted mode. /pedantic_mode -- Mark Stapleton
Re: 1501?
On Jul 1, 2004, at 19:52, Stapleton, Mark wrote: From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Zoltan Forray/AC/VCU FWIW, when doing port blocking/filtering, 1500 1501 should be open to allow TSM through, both directions. pedantic_mode From page 21 of the _Backup-Archive Clients Installation and User's Guide for Windows, Version 5 Release 2_: For the client scheduler [set] in prompted mode, it is unnecessary to open any ports on the firewall. If you set the sessioninitiation option to serveronly, the client will not attempt to contact the server. All sessions will be initiated by server prompted scheduling on the port defined on the client with the tcpclientport option. The sessioninitiation option only affects the behavior of the client scheduler running in the prompted mode. /pedantic_mode which basically means that if you actually follow this advise, you will be able to do scheduled backups, but never be able to do unscheduled restores, thus rendering your TSM server quite worthless. OTOH, if you do the opposite, you can have your client behind a firewall not opening any ports to the TSM server and you only need TCPPORT (1500 per default) open at the server end for your clients. -- Mark Stapleton -- Met vriendelijke groeten, Remco Post SARA - Reken- en Netwerkdiensten http://www.sara.nl High Performance Computing Tel. +31 20 592 8008Fax. +31 20 668 3167 I really didn't foresee the Internet. But then, neither did the computer industry. Not that that tells us very much of course - the computer industry didn't even foresee that the century was going to end. -- Douglas Adams