I just heard from development put on the latest available server patch. They now know an unload and audit can get into a deadly embrace because of W2K system objects. 4.2.2.10 and 5.1.1.4 have the fixes for the problems.
Paul D. Seay, Jr. Technical Specialist Naptheon Inc. 757-688-8180 -----Original Message----- From: Farren Minns [mailto:[EMAIL PROTECTED]] Sent: Friday, September 06, 2002 3:09 AM To: [EMAIL PROTECTED] Subject: Running and auditdb tomorrow, any advice Hi TSMers I know I have asked simple questions before, but the only silly question is the one not asked. I am running TSM3738 on a Solaris 2.7 box (E250 400mhz 1GB mem). Can you tell me if the way to run an audit is simply as follows:- 1) Halt the server 2) Issue the command dsmserv auditdb fix=yes If the above syntax is correct, how can I see the progress of the job if TSM is not running? Does anyone have much experience with this? Would it be best to pipe the output to a file? If so, is the file likely to become huge!? My db is 7500 allocated and about 70% utilised. I have a 1000Mb log file with logging set to 'normal' mode. Any questions? Please ask. Many thanks in advance for your help. Farren Minns - Trainee TSM and Solaris System Admin - John Wiley & sons Ltd **************************************************************************** ** Our Chichester based offices are amalgamating and relocating to a new address from 1st September 2002 John Wiley & Sons Ltd The Atrium Southern Gate Chichester West Sussex PO19 8SQ Main phone and fax numbers remain the same: Phone +44 (0)1243 779777 Fax +44 (0)1243 775878 Direct dial numbers are unchanged Address, phone and fax nos. for all other Wiley UK locations are unchanged **************************************************************************** **