Re: AdWords API v2009 Hack Days
Hi All, A small correction to my original post: the two locations are New York and San Francisco, not Mountain View. Best, - Eric On Dec 17, 10:40 am, AdWords API Advisor wrote: > Hi Ursula, > > At this point there are no plans to have Hack Days at other locations > in the US, but thanks for the interest. Plus, this event could be a > great excuse to get away from the Chicago cold and spend some time in > sunny San Francisco! > > Best, > - Eric > > On Dec 15, 6:35 pm, Ursula wrote: > > > > > Sounds greathow about one for us Chicago users? > > > On Dec 14, 5:49 pm, AdWords API Advisor > > wrote: > > > > Have you been putting off migrating to v2009? Not sure where to start? > > > Been way too busy? Well it's time to jump start your v2009 development > > > with some in-person help from Google. Join us in Mountain View or New > > > York for a full day of non-stop v2009 hacking. > > > > To keep things interesting throughout the day, we'll do some coding > > > demos of the cool things you can do with v2009 that weren't possible > > > in v13, like asynchronous calls, dynamic ad parameters, and more. > > > Non-engineers beware! This is a developer-only event, and there will > > > be no content or activities for attendees who don't plan to write > > > code. > > > > Space is limited, and signups are on a first come, first serve basis. > > > We ask that you limit attendees to two people per company. If you are > > > based in Europe please don't register yet, as a similar EMEA event is > > > in the works and will be announced shortly. > > > > More information and the signup form are available > > > here:http://sites.google.com/site/v2009hackdays/ > > > > Best, > > > - Eric Koleda, AdWords API Team -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Multiple Ad Types In Same AdGroup
Eric, No other context to provide ... thanks for clearing it up. Pete On Dec 17, 4:09 pm, AdWords API Advisor wrote: > Hi Pete, > > I followed up with my colleagues and there is no such limitation in > the system. Can you provide me any further context for this > conversation? Is this behavior you are witnessing on your own > accounts? > > Best, > - Eric > > On Dec 17, 3:43 pm, "Pete Lavetsky (AdWords API Guru)" > > wrote: > > Eric, > > > Unfortunately no link ... would you be able to ping the core > > engineering team please? > > > Thanks > > Pete > > > On Dec 17, 3:36 pm, AdWords API Advisor > > wrote: > > > > Hi Pete, > > > > I am not aware of any such limitation. Do you have a link to this > > > information? > > > > Best, > > > - Eric Koleda, AdWords API Team > > > > On Dec 17, 3:04 pm, "Pete Lavetsky (AdWords API Guru)" > > > > wrote: > > > > I recently saw a conversation where it was stated that an AdGroup > > > > cannot support multiple Ad types within it ... ie. that the Google > > > > system cannot support both a text ad and an image ad in the same > > > > AdGroup, and that the system would completely stop showing ads for > > > > this AdGroup. > > > > > Is there any truth whatsoever to this statement? -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Multiple Ad Types In Same AdGroup
Hi Pete, I followed up with my colleagues and there is no such limitation in the system. Can you provide me any further context for this conversation? Is this behavior you are witnessing on your own accounts? Best, - Eric On Dec 17, 3:43 pm, "Pete Lavetsky (AdWords API Guru)" wrote: > Eric, > > Unfortunately no link ... would you be able to ping the core > engineering team please? > > Thanks > Pete > > On Dec 17, 3:36 pm, AdWords API Advisor > wrote: > > > > > Hi Pete, > > > I am not aware of any such limitation. Do you have a link to this > > information? > > > Best, > > - Eric Koleda, AdWords API Team > > > On Dec 17, 3:04 pm, "Pete Lavetsky (AdWords API Guru)" > > > wrote: > > > I recently saw a conversation where it was stated that an AdGroup > > > cannot support multiple Ad types within it ... ie. that the Google > > > system cannot support both a text ad and an image ad in the same > > > AdGroup, and that the system would completely stop showing ads for > > > this AdGroup. > > > > Is there any truth whatsoever to this statement? -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Multiple Ad Types In Same AdGroup
Eric, Unfortunately no link ... would you be able to ping the core engineering team please? Thanks Pete On Dec 17, 3:36 pm, AdWords API Advisor wrote: > Hi Pete, > > I am not aware of any such limitation. Do you have a link to this > information? > > Best, > - Eric Koleda, AdWords API Team > > On Dec 17, 3:04 pm, "Pete Lavetsky (AdWords API Guru)" > > wrote: > > I recently saw a conversation where it was stated that an AdGroup > > cannot support multiple Ad types within it ... ie. that the Google > > system cannot support both a text ad and an image ad in the same > > AdGroup, and that the system would completely stop showing ads for > > this AdGroup. > > > Is there any truth whatsoever to this statement? -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Signup link for adwords api v2009 is broken
Lol! Thank you very much indeed! Best, Antoinet On Dec 17, 6:22 pm, AdWords API Advisor wrote: > Hi Antoinet, > > The signup page is gone because the v2009 API is now open to everyone! > > http://adwordsapi.blogspot.com/2009/08/adwords-api-v2009-beta-now-ava... > > The newest version is v200909: > > http://adwordsapi.blogspot.com/2009/10/were-happy-to-announce-newest-... > > Best, > - Eric Koleda, AdWords API Team > > On Dec 16, 6:36 am, antoinet wrote: > > > Hello, > > > I'm trying to sign up for using Google adwords api v2009, and the sign > > up link appears to be broken. Here is the sign up link I > > found:http://code.google.com/apis/adwords/v2009/docs/signup.html > > And here is where I found > > it:http://adwordsapi.blogspot.com/2009/06/adwords-api-v2009-launch.htmlh.. > > > I'm looking forward to accessing the Google adwords api v2009 :) > > antoinet -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Multiple Ad Types In Same AdGroup
Hi Pete, I am not aware of any such limitation. Do you have a link to this information? Best, - Eric Koleda, AdWords API Team On Dec 17, 3:04 pm, "Pete Lavetsky (AdWords API Guru)" wrote: > I recently saw a conversation where it was stated that an AdGroup > cannot support multiple Ad types within it ... ie. that the Google > system cannot support both a text ad and an image ad in the same > AdGroup, and that the system would completely stop showing ads for > this AdGroup. > > Is there any truth whatsoever to this statement? -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
Re: AdWords API proximity targets - conflict between adwords API and adwords UI
Hi Guy, I have been able to replicate the problem, and I will report it to the core engineering team. If you are not actually trying to update any geo targets, a simple work around is to merely exclude the geoTargeting element from your update request. When performing an update you only need to specify the required fields (like id) and the fields you wish to update. http://schemas.xmlsoap.org/soap/ envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; xmlns:v13="https://adwords.google.com/api/adwords/v13";> ... https://adwords.google.com/api/adwords/ v13"> ID_HERE UPDATING_THE_NAME_ONLY Best, - Eric On Dec 17, 10:07 am, Guy Zucker wrote: > Hi, > > I would appreciate any ideas on the foolowing issue: > I’ve encountered a problem using the api for downloading/uploading > campaigns with proximity targets. > In adwords it is possible to define a proximity target with a 500 > miles radius (804,762 meters), but via the api you can only create a > target with a 800,000 meter radius (so you can't update a campaign you > downloaded). > > Any ideas how to work around this? > > Thanks, > > Guy > > -- > > You received this message because you are subscribed to the Google Groups > "AdWords API Forum" group. > To post to this group, send email to adwords-...@googlegroups.com. > To unsubscribe from this group, send email to > adwords-api+unsubscr...@googlegroups.com oups.com> > . > For more options, visit this group > athttp://groups.google.com/group/adwords-api?hl=en. -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: getUnitCountForMethod in v2009 InfoService
I see, using the MCC in the Client Id field made it work. It would definitely be useful to have this in the documentation, and for any other services that will require the MCC Id. Thank you! On Dec 17, 2:54 pm, AdWords API Advisor wrote: > Hi Joel, > > I am able to retrieve units correctly in my tests. Something to be > aware of is that for the InfoService to work correctly the MCC user > that owns the developer token must be the one to make the request. > Requests made by other MCCs or AdWords accounts will not return any > information. We are in the processes of update the documentation to > reflect this. > > Best, > - Eric Koleda, AdWords API Team > > On Dec 17, 2:17 pm, joel wrote: > > > I'm not sure if this is related, but I'm also seeing 0 returned as the > > cost for all calls I made to the InfoService. I'm still in the process > > of migrating from v13, so should v13 API units used still show up > > under UNIT_COUNT? Here's the sanitized SOAP I'm sending that's > > returning 0 cost: > > > > xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"; > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";> > soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next"; > > soapenv:mustUnderstand="0" xmlns:ns1="https://adwords.google.com/api/ > > adwords/info/v200909">TOKEN > ns2:applicationToken>** > ns3:authToken>ID > ns4:clientCustomerId>TOKEN > ns5:developerToken>AGENT > ns6:userAgent>https://adwords.google.com/ > > api/adwords/cm/v200909">false > soapenv:Header>https://adwords.google.com/ > > api/adwords/info/v200909"> > xmlns:ns8="https://adwords.google.com/api/adwords/cm/ > > v200909">2009120120091216 > dateRange>UNIT_COUNT > soapenv:Body> (handleRequest.159) > > > DEBUG [soap_xml] > xmlns:soap="http://schemas.xmlsoap.org/soap/ > > envelope/">37b605d5b1f0f2d70b2451589608ea58 > requestId>1489 > responseTime>1 > soap:Header>0 > ns2:cost> > > (handleResponse.219) > > > Thanks! > > > -Joel > > > On Dec 2, 12:25 pm, AdWords API Advisor > > wrote: > > > > Hi James, > > > > Your request looks correctly formatted, and I am seeing the same > > > behavior on my end. I've reported the issue to the core engineering > > > team and I'll update this thread when I have more information. > > > > Best, > > > - Eric Koleda, AdWords API Team > > > > On Dec 1, 8:35 pm, James wrote: > > > > > Hello, > > > > We are migrating our code to v2009. We have a job which gets the quota > > > > used per method for a specified date range, and am having trouble > > > > getting this working in v2009. I get the total quota for a date range > > > > without any trouble, but when I add a service/method to the selector > > > > it always returns 0. > > > > Now in the migration > > > > guidehttp://code.google.com/apis/adwords/v2009/docs/callguide.html#infoser... > > > > It does not mention the getUnitCountForMethod call. Does that mean it > > > > is not supported in v2009? > > > > I have tried using both v13 and v2009 service/method filters. SOAP is > > > > below. > > > > > As I said, it seems to be working fine without the service/method tags > > > > in the SOAP. > > > > Thanks in advance > > > > James > > > > > -- v13 - > > > > http://schemas.xmlsoap.org/soap/ > > > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > > > adwords.google.com/api/adwords/info/v200909" xmlns:ns2="https:// > > > > adwords.google.com/api/adwords/cm/v200909" > > > > > > > > > > > > > > > > > > > > > > > > > > > > ns2:applicationToken> > > > > > > > > > > > > > > > > https://adwords.google.com/api/adwords/info/v200909"; > > > > xmlns:cm="https://adwords.google.com/api/adwords/cm/v200909";> > > > > > > > > CriterionService > > > > getAllCriteria > > > > > > > > 20091101 > > > > 20091130 > > > > > > > > UNIT_COUNT > > > > > > > > > > > > > > > > > > > > > http://schemas.xmlsoap.org/soap/envelope/";> > > > > > > > > https://adwords.google.com/api/adwords/ > > > > info/v200909" xmlns="https://adwords.google.com/api/adwords/cm/ > > > > v200909"> > > > > 1075aba1906b64e2ca628dc5d8d5a3e0 > > > > 1 > > > > 3503 > > > > 1 > > > > > > > > > > > > > > > > https://adwords.google.com/api/adwords/cm/ > > > > v200909" xmlns:ns2="https://adwords.google.com/api/adwords/info/ > > > > v200909"> > > > > > > > > 0 > > > > > > > > > > > > > > > > > > > > > -- v2009 - > > > > http://schemas.xmlsoap.org/soap/ > > > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > > > a
AdWords API Multiple Ad Types In Same AdGroup
I recently saw a conversation where it was stated that an AdGroup cannot support multiple Ad types within it ... ie. that the Google system cannot support both a text ad and an image ad in the same AdGroup, and that the system would completely stop showing ads for this AdGroup. Is there any truth whatsoever to this statement? -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: getUnitCountForMethod in v2009 InfoService
Hi Joel, I am able to retrieve units correctly in my tests. Something to be aware of is that for the InfoService to work correctly the MCC user that owns the developer token must be the one to make the request. Requests made by other MCCs or AdWords accounts will not return any information. We are in the processes of update the documentation to reflect this. Best, - Eric Koleda, AdWords API Team On Dec 17, 2:17 pm, joel wrote: > I'm not sure if this is related, but I'm also seeing 0 returned as the > cost for all calls I made to the InfoService. I'm still in the process > of migrating from v13, so should v13 API units used still show up > under UNIT_COUNT? Here's the sanitized SOAP I'm sending that's > returning 0 cost: > > xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"; > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";> soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next"; > soapenv:mustUnderstand="0" xmlns:ns1="https://adwords.google.com/api/ > adwords/info/v200909">TOKEN ns2:applicationToken>** ns3:authToken>ID ns4:clientCustomerId>TOKEN ns5:developerToken>AGENT ns6:userAgent>https://adwords.google.com/ > api/adwords/cm/v200909">false soapenv:Header>https://adwords.google.com/ > api/adwords/info/v200909"> xmlns:ns8="https://adwords.google.com/api/adwords/cm/ > v200909">2009120120091216 dateRange>UNIT_COUNT soapenv:Body> (handleRequest.159) > > DEBUG [soap_xml] xmlns:soap="http://schemas.xmlsoap.org/soap/ > envelope/">37b605d5b1f0f2d70b2451589608ea58 requestId>1489 responseTime>1 soap:Header>0 ns2:cost> > (handleResponse.219) > > Thanks! > > -Joel > > On Dec 2, 12:25 pm, AdWords API Advisor > wrote: > > > > > Hi James, > > > Your request looks correctly formatted, and I am seeing the same > > behavior on my end. I've reported the issue to the core engineering > > team and I'll update this thread when I have more information. > > > Best, > > - Eric Koleda, AdWords API Team > > > On Dec 1, 8:35 pm, James wrote: > > > > Hello, > > > We are migrating our code to v2009. We have a job which gets the quota > > > used per method for a specified date range, and am having trouble > > > getting this working in v2009. I get the total quota for a date range > > > without any trouble, but when I add a service/method to the selector > > > it always returns 0. > > > Now in the migration > > > guidehttp://code.google.com/apis/adwords/v2009/docs/callguide.html#infoser... > > > It does not mention the getUnitCountForMethod call. Does that mean it > > > is not supported in v2009? > > > I have tried using both v13 and v2009 service/method filters. SOAP is > > > below. > > > > As I said, it seems to be working fine without the service/method tags > > > in the SOAP. > > > Thanks in advance > > > James > > > > -- v13 - > > > http://schemas.xmlsoap.org/soap/ > > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > > adwords.google.com/api/adwords/info/v200909" xmlns:ns2="https:// > > > adwords.google.com/api/adwords/cm/v200909" > > > > > > > > > > > > > > > > > > > > > ns2:applicationToken> > > > > > > > > > > > > https://adwords.google.com/api/adwords/info/v200909"; > > > xmlns:cm="https://adwords.google.com/api/adwords/cm/v200909";> > > > > > > CriterionService > > > getAllCriteria > > > > > > 20091101 > > > 20091130 > > > > > > UNIT_COUNT > > > > > > > > > > > > > > > > http://schemas.xmlsoap.org/soap/envelope/";> > > > > > > https://adwords.google.com/api/adwords/ > > > info/v200909" xmlns="https://adwords.google.com/api/adwords/cm/ > > > v200909"> > > > 1075aba1906b64e2ca628dc5d8d5a3e0 > > > 1 > > > 3503 > > > 1 > > > > > > > > > > > > https://adwords.google.com/api/adwords/cm/ > > > v200909" xmlns:ns2="https://adwords.google.com/api/adwords/info/ > > > v200909"> > > > > > > 0 > > > > > > > > > > > > > > > > -- v2009 - > > > http://schemas.xmlsoap.org/soap/ > > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > > adwords.google.com/api/adwords/info/v200909" xmlns:ns2="https:// > > > adwords.google.com/api/adwords/cm/v200909" > > > > > > > > > > > > > > > > > > > > > ns2:applicationToken> > > > > > > > > > > > > https://adwords.google.com/api/adwords/info/v200909"; > > > xmlns:cm="https://adwords.google.com/api/adwords/cm/v200909";> > > > > > > AdGroupCriterionService > > > get > > > > > > 20091101 > > > 20091130 > > > >
AdWords API Re: getUnitCountForMethod in v2009 InfoService
Hi James, The cause of this problem has been identified and a fix was developed and pushed to production. Let me know if you see any other issues. Best, - Eric On Dec 2, 12:25 pm, AdWords API Advisor wrote: > Hi James, > > Your request looks correctly formatted, and I am seeing the same > behavior on my end. I've reported the issue to the core engineering > team and I'll update this thread when I have more information. > > Best, > - Eric Koleda, AdWords API Team > > On Dec 1, 8:35 pm, James wrote: > > > > > Hello, > > We are migrating our code to v2009. We have a job which gets the quota > > used per method for a specified date range, and am having trouble > > getting this working in v2009. I get the total quota for a date range > > without any trouble, but when I add a service/method to the selector > > it always returns 0. > > Now in the migration > > guidehttp://code.google.com/apis/adwords/v2009/docs/callguide.html#infoser... > > It does not mention the getUnitCountForMethod call. Does that mean it > > is not supported in v2009? > > I have tried using both v13 and v2009 service/method filters. SOAP is > > below. > > > As I said, it seems to be working fine without the service/method tags > > in the SOAP. > > Thanks in advance > > James > > > -- v13 - > > http://schemas.xmlsoap.org/soap/ > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > adwords.google.com/api/adwords/info/v200909" xmlns:ns2="https:// > > adwords.google.com/api/adwords/cm/v200909" > > > > > > > > > > > > > > ns2:applicationToken> > > > > > > > > https://adwords.google.com/api/adwords/info/v200909"; > > xmlns:cm="https://adwords.google.com/api/adwords/cm/v200909";> > > > > CriterionService > > getAllCriteria > > > > 20091101 > > 20091130 > > > > UNIT_COUNT > > > > > > > > > > > http://schemas.xmlsoap.org/soap/envelope/";> > > > > https://adwords.google.com/api/adwords/ > > info/v200909" xmlns="https://adwords.google.com/api/adwords/cm/ > > v200909"> > > 1075aba1906b64e2ca628dc5d8d5a3e0 > > 1 > > 3503 > > 1 > > > > > > > > https://adwords.google.com/api/adwords/cm/ > > v200909" xmlns:ns2="https://adwords.google.com/api/adwords/info/ > > v200909"> > > > > 0 > > > > > > > > > > > -- v2009 - > > http://schemas.xmlsoap.org/soap/ > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > adwords.google.com/api/adwords/info/v200909" xmlns:ns2="https:// > > adwords.google.com/api/adwords/cm/v200909" > > > > > > > > > > > > > > ns2:applicationToken> > > > > > > > > https://adwords.google.com/api/adwords/info/v200909"; > > xmlns:cm="https://adwords.google.com/api/adwords/cm/v200909";> > > > > AdGroupCriterionService > > get > > > > 20091101 > > 20091130 > > > > UNIT_COUNT > > > > > > > > > > > http://schemas.xmlsoap.org/soap/envelope/";> > > > > https://adwords.google.com/api/adwords/cm/ > > v200909" xmlns="https://adwords.google.com/api/adwords/info/v200909";> > > 349eb305ee75b5a20f7cb45f5e809431 > > 1 > > 2601 > > 1 > > > > > > > > https://adwords.google.com/api/adwords/info/ > > v200909" xmlns:ns2="https://adwords.google.com/api/adwords/cm/ > > v200909"> > > > > 0 > > > > > > > > -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Sample code for v2009
Hi Alexis, Thank you for the feedback. Although there currently isn't a single page that lists them all, the client libraries have been updated to have a consistent set of v2009 examples. You can read more about this one our blog: http://adwordsapi.blogspot.com/2009/12/discover-v2009-new-examples-in-client.html Best, - Eric Koleda, AdWords API Team On Dec 17, 8:41 am, Alexis wrote: > Hi, > > Is it possible to have the same > ashttp://code.google.com/intl/fr-FR/apis/adwords/docs/samples.html > for the v2009 of the api adwords? > > Cause here i'm totally lost > > Regards -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: getUnitCountForMethod in v2009 InfoService
I'm not sure if this is related, but I'm also seeing 0 returned as the cost for all calls I made to the InfoService. I'm still in the process of migrating from v13, so should v13 API units used still show up under UNIT_COUNT? Here's the sanitized SOAP I'm sending that's returning 0 cost: http://schemas.xmlsoap.org/soap/envelope/"; xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:xsi="http:// www.w3.org/2001/XMLSchema-instance">http://schemas.xmlsoap.org/soap/actor/next"; soapenv:mustUnderstand="0" xmlns:ns1="https://adwords.google.com/api/ adwords/info/v200909">TOKEN**IDTOKENAGENThttps://adwords.google.com/ api/adwords/cm/v200909">falsehttps://adwords.google.com/ api/adwords/info/v200909">https://adwords.google.com/api/adwords/cm/ v200909">2009120120091216UNIT_COUNT (handleRequest.159) DEBUG [soap_xml] http://schemas.xmlsoap.org/soap/ envelope/">37b605d5b1f0f2d70b2451589608ea58148910 (handleResponse.219) Thanks! -Joel On Dec 2, 12:25 pm, AdWords API Advisor wrote: > Hi James, > > Your request looks correctly formatted, and I am seeing the same > behavior on my end. I've reported the issue to the core engineering > team and I'll update this thread when I have more information. > > Best, > - Eric Koleda, AdWords API Team > > On Dec 1, 8:35 pm, James wrote: > > > Hello, > > We are migrating our code to v2009. We have a job which gets the quota > > used per method for a specified date range, and am having trouble > > getting this working in v2009. I get the total quota for a date range > > without any trouble, but when I add a service/method to the selector > > it always returns 0. > > Now in the migration > > guidehttp://code.google.com/apis/adwords/v2009/docs/callguide.html#infoser... > > It does not mention the getUnitCountForMethod call. Does that mean it > > is not supported in v2009? > > I have tried using both v13 and v2009 service/method filters. SOAP is > > below. > > > As I said, it seems to be working fine without the service/method tags > > in the SOAP. > > Thanks in advance > > James > > > -- v13 - > > http://schemas.xmlsoap.org/soap/ > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > adwords.google.com/api/adwords/info/v200909" xmlns:ns2="https:// > > adwords.google.com/api/adwords/cm/v200909" > > > > > > > > > > > > > > ns2:applicationToken> > > > > > > > > https://adwords.google.com/api/adwords/info/v200909"; > > xmlns:cm="https://adwords.google.com/api/adwords/cm/v200909";> > > > > CriterionService > > getAllCriteria > > > > 20091101 > > 20091130 > > > > UNIT_COUNT > > > > > > > > > > > http://schemas.xmlsoap.org/soap/envelope/";> > > > > https://adwords.google.com/api/adwords/ > > info/v200909" xmlns="https://adwords.google.com/api/adwords/cm/ > > v200909"> > > 1075aba1906b64e2ca628dc5d8d5a3e0 > > 1 > > 3503 > > 1 > > > > > > > > https://adwords.google.com/api/adwords/cm/ > > v200909" xmlns:ns2="https://adwords.google.com/api/adwords/info/ > > v200909"> > > > > 0 > > > > > > > > > > > -- v2009 - > > http://schemas.xmlsoap.org/soap/ > > envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"; > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > > xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:ns1="https:// > > adwords.google.com/api/adwords/info/v200909" xmlns:ns2="https:// > > adwords.google.com/api/adwords/cm/v200909" > > > > > > > > > > > > > > ns2:applicationToken> > > > > > > > > https://adwords.google.com/api/adwords/info/v200909"; > > xmlns:cm="https://adwords.google.com/api/adwords/cm/v200909";> > > > > AdGroupCriterionService > > get > > > > 20091101 > > 20091130 > > > > UNIT_COUNT > > > > > > > > > > > http://schemas.xmlsoap.org/soap/envelope/";> > > > > https://adwords.google.com/api/adwords/cm/ > > v200909" xmlns="https://adwords.google.com/api/adwords/info/v200909";> > > 349eb305ee75b5a20f7cb45f5e809431 > > 1 > > 2601 > > 1 > > > > > > > > https://adwords.google.com/api/adwords/info/ > > v200909" xmlns:ns2="https://adwords.google.com/api/adwords/cm/ > > v200909"> > > > > 0 > > > > > > > > -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Sandbox v200909 - Limit per Account
Hi Faisal, In addition to Zeljko's great advice, you can also rename your deleted campaign, perhaps appending the word "DELETED". Best, - Eric Koleda, AdWords API Team On Dec 17, 9:22 am, ZSvedic wrote: > Hi, > > Campaign names are unique and you cannot create new campaign with the > same name as deleted campaign (because deleted campaigns are still > there, just with deleted status). You have few options: > > a) Don’t create a new campaign, just un-delete the campaign with the > same name. For that you need to change deleted campaigns status and > set correct start and end dates. > > b) You have 5 clients on SandBox (client_1, client_2, etc.). If you > reached campaign limit, just use another (empty client). > > c) All sandbox accounts are cleaned once a month, that will purge > deleted campaigns in your original client. > > Regards, > > -- > Zeljko > GemBox.Ppc -http://www.GemBoxSoftware.com/Ppc/Overview.htm- Manage > AdWords data from C# / VB.NET applications. > > On Dec 17, 10:49 am, Faisal Dgs wrote: > > > > > Hi All, > > > I think there is a limit of 25 campaigns per account for Sandbox. > > Please correct me I am wrong here. > > > My problem is that I have created a campaign named "Test" and it's > > status is Active by default. Now if I set it's status to Deleted and I > > try to create to another campaign named "Test" I am getting duplicate > > campaign name error :( > > > If a campaign is deleted then there are no chances of pausing or > > activating that particular campaign(very true in my case). So I should > > be able to create campaign with a similar name of deleted campaign. > > Any workarounds for this problem because this is really driving me > > crazy :( > > > May be it sounds logical but it should be only for production why > > sandbox isn't allowing this??? > > > Thanks, > > Faisal -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Cannot catch ApiException
Hi Faisal, Are you using the AdWords API .NET client library? If so I would suggest you open a bug on the issue tracker to alert the maintainers of this problem: http://code.google.com/p/google-api-adwords-dotnet/issues/list Best, - Eric Koleda, AdWords API Team On Dec 16, 3:02 pm, Faisal Dgs wrote: > Hi There, > > I am using v200909. I am trying to catch ApiException in catch block > but I am getting "The type caught or thrown must be derived from > System.Exception" exception. I am using C# 3.5. > > Please help. Because I have a sample code where ApiException is caught > in catch block athttp://adwordsapi.blogspot.com/. > > Regards, > Faisal -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: About the 'Exact' keyword match type
Hi Donald, The matchType "EXACT" on the seed keyword is used to calibrate the recommendation engine, but it will not limit the results to only keywords that contain the seed keyword exactly. This feature doesn't exist in the TargetingIdeaService, but can be approximated using the NgramGroupsSearchParameter. See the following thread for more details: http://groups.google.com/group/adwords-api/browse_thread/thread/b246a23087f946f1/ Best, - Eric Koleda, AdWords API Team On Dec 16, 1:47 pm, Donald wrote: > Hi, > > I need exact type match results after using the TargetingIdeaService > of the v200909 API. > > However, from the results obtained, I have to extract those that have > the exact type. > > For example, if my input was "mars cruise", I get results like "cruise > to mars" and "world cruise". I have to extract the results like > "cruise to mars" since they contain both "mars" and "cruise". > > Is there a direct way of doing this? > > Is my understanding of the 'exact' KeywordMatchType incorrect? > > Any thoughts will be appreciated! > > -- > D -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: TargetingIdeaService GetBulkKeywordIdeas
Hi, You are correct, the RelatedToUrlSearchParameter isn't being set correctly. You can see an example of how to use this parameter in the following example: http://code.google.com/p/google-api-adwords-php/source/browse/trunk/examples/v200909/GetRelatedPlacements.php Best, - Eric Koleda, AdWords API Team On Dec 16, 11:06 am, westsider wrote: > I was using v13 to get keywords ideas from urls (frequently) and am > struggling with the new methods. > > I'm getting the error message INSUFFICIENT_SEARCH_PARAMETERS when I > used the following php code: > I suspect I haven't defined RelatedToUrlSearchParameter properly. Any > help would be greatly appreciated. > > $selector = new TargetingIdeaSelector(); > $selector->requestType = 'IDEAS'; > $selector->ideaType = 'KEYWORD'; > $selector->RelatedToUrlSearchParameter = array > ('','[target_site','false'); > $selector->requestedAttributeTypes = array('KEYWORD', > 'GLOBAL_MONTHLY_SEARCHES'); > > // Set selector paging (required for targeting idea service). > $paging = new Paging(); > $paging->startIndex = 0; > $paging->numberResults = 10; > $selector->paging = $paging; > > // Get related keywords. > $page = $targetingIdeaService->getBulkKeywordIdeas($selector); > > if (isset($page->entries)) { > foreach ($page->entries as $targetingIdea) { > $keyword = $targetingIdea->data[0]->value->value; > $search_vol = $targetingIdea->data[1]->value->value; > print 'Keyword with text "' . $keyword->text . '" and match > type "' > . $keyword->matchType . "\" was found. search vol: > $search_vol\n"; > } > } else { > print "No related keywords were found.\n"; > }} catch (Exception $e) { > > print_r($e); -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Signup link for adwords api v2009 is broken
Hi Antoinet, The signup page is gone because the v2009 API is now open to everyone! http://adwordsapi.blogspot.com/2009/08/adwords-api-v2009-beta-now-available-to.html The newest version is v200909: http://adwordsapi.blogspot.com/2009/10/were-happy-to-announce-newest-version.html Best, - Eric Koleda, AdWords API Team On Dec 16, 6:36 am, antoinet wrote: > Hello, > > I'm trying to sign up for using Google adwords api v2009, and the sign > up link appears to be broken. Here is the sign up link I > found:http://code.google.com/apis/adwords/v2009/docs/signup.html > And here is where I found > it:http://adwordsapi.blogspot.com/2009/06/adwords-api-v2009-launch.htmlhttp://www.google.com/support/adwordsapi/bin/answer.py?hl=en&answer=1... > > I'm looking forward to accessing the Google adwords api v2009 :) > antoinet -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: PHP v2009 Monthly Search Volume
Hi Keesjan, The message from the engineering team is that last month's data will be available within a week of the end of the month. This is the current behavior, and there are no plans to change it that I am aware of. Best, - Eric On Dec 16, 2:42 pm, hikmetcancelik wrote: > Hi Eric, > > Would you also please tell me why TargetingIdeaService is not > returning the supplied keyword information? > Do I have to make paging 100 in order to get the info for keyword I'm > asking for?(Which wastes 100 api unit ?) > > Thanks > > On Nov 18, 3:21 pm, AdWords API Advisor > wrote: > > > > > Hi, > > > I'm glad to hear you have it working now. The TargetingIdeaService is > > more closely related to the Search-Based Keyword Tool: > > > http://www.google.com/sktool/. > > > The results from this tool and the TargetingIdeaService may be > > different that those from the old Keyword Tool and > > KeywordToolService: > > > http://www.google.com/support/sktool/bin/answer.py?hl=en&answer=114875. > > > Best, > > - Eric > > > On Nov 18, 6:05 pm, a2b wrote: > > > > I ran it on production and was able to get data back. Are these > > > numbers suppose to line up with the KeywordToolExternal? > > > >https://adwords.google.com/select/KeywordToolExternal > > > > The numbers seem to be quite different. > > > > On Nov 18, 2:30 pm, a2b wrote: > > > > > The sandbox -- I am about to test with production. What I don't > > > > understand is there is no fake data -- it's simply NULL? > > > > > On Nov 18, 2:20 pm, AdWords API Advisor > > > > wrote: > > > > > > Hi, > > > > > > Are you making requests against the sandbox or production > > > > > environment? The sandbox environment will not return real data for > > > > > this service. > > > > > > Best, > > > > > - Eric > > > > > > On Nov 18, 4:04 pm, a2b wrote: > > > > > > > I tried that and got back an array of 299 or so elements which were > > > > > > all NULL. See below: > > > > > > > object(TargetingIdeaPage)#38 (2) { > > > > > > ["totalNumEntries"]=> > > > > > > int(300) > > > > > > ["entries"]=> > > > > > > array(300) { > > > > > > [0]=> > > > > > > object(TargetingIdea)#37 (1) { > > > > > > ["data"]=> > > > > > > NULL > > > > > > } > > > > > > [1]=> > > > > > > object(TargetingIdea)#36 (1) { > > > > > > ["data"]=> > > > > > > NULL > > > > > > } > > > > > > [2]=> > > > > > > object(TargetingIdea)#35 (1) { > > > > > > ["data"]=> > > > > > > NULL > > > > > > } > > > > > > .. > > > > > > > I was able to get slightly better results with > > > > > > TARGETED_MONTHLY_SEARCHES but all the counts are still NULL. Is > > > > > > this > > > > > > because it is in the sandbox? I would assume the sandbox would just > > > > > > return fake numbers, not null. > > > > > > > ["value"]=> > > > > > > array(12) { > > > > > > [0]=> > > > > > > object(MonthlySearchVolume)#4524 (3) { > > > > > > ["year"]=> > > > > > > int(2009) > > > > > > ["month"]=> > > > > > > int(10) > > > > > > ["count"]=> > > > > > > NULL > > > > > > } > > > > > > [1]=> > > > > > > object(MonthlySearchVolume)#4525 (3) { > > > > > > ["year"]=> > > > > > > int(2009) > > > > > > ["month"]=> > > > > > > int(9) > > > > > > ["count"]=> > > > > > > NULL > > > > > > } > > > > > > [2]=> > > > > > > > Thank you for your help! -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: data to a xml
Hi P.W., The new AdWords API PHP client library currently doesn't support returning data as raw XML, only as objects. Could you use the objects to update your database? Best, - Eric On Dec 16, 7:47 am, phpoo wrote: > Hi Eric > this problem.. > Take the data from the Campaigns, AdGroup, Ad and Keywords and move to > an xml file to record in my database. As contained in the > soap_xml.log. That's it. > > tanks > P.W > > On 15 dez, 13:24, AdWords API Advisor > wrote: > > > > > Hi P.W., > > > Can you give me more detail on what you are trying to accomplish with > > the API? Do you have any sample code that illustrates the problem? > > > Thanks, > > - Eric Koleda, AdWords API Team > > > On Dec 15, 6:34 am, phpoo wrote: > > > > Previously I used the apility and now I'm using v200909, to pass my > > > data to a xml own apility had a function, the version v200909 not have > > > one too? > > > > Thanks > > > P.W -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Please post an example of handling PolicyViolationError
Hi, Thank you for the feedback. We understand this is a gap in our current examples, and it is something we are working on. Best, - Eric Koleda, AdWords API Team On Dec 16, 3:37 am, Maxim wrote: > ...using OGNL, preferrably in Java. > > If I'm passing an array of AdGroupAd[] to mutate() operation in > AdGroupAdService, and some ads violate a policy, it's not clear how to > evaluate ApiError.fieldPath with OGNL library - what should be passed > as parameter to Ognl.getValue() - array of AdGroupAd[], array of Ad[], > individual Ad objects??? > > Thanks. -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Wasting API Units with TargetingIdeaService
Hi Can, I'll bring this up with the core engineering team to see if they have any further information. However, there is a better way to get the stats for only your input keyword, and that is using the requestType STATS instead of IDEAS: http://code.google.com/apis/adwords/v2009/docs/reference/TargetingIdeaService.RequestType.html If you use this request type, the results returned will only be the keywords you used as input. Best, - Eric Koleda, AdWords API Team On Dec 15, 9:00 pm, hikmetcancelik wrote: > TargetingIdeasService used to return keyword information such as > GLOBAL_MONTHLY_SEARCHES, COMPETITION etc.. when you request the same > keyword with paging 1 (0,1). > Now you need to check at least 20 results(paging 0,20) to match to > keyword you're looking which is wasting a lot of API Units.What was it > changed since last week? Or is there a problem with the service? > > Thanks, > Can -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: How Can I get Budget for my Account?
Hi SunHo Choi, Unfortunately this feature isn't available in the API. Best, - Eric Koleda, AdWords API Team On Dec 15, 8:41 pm, SunHo Choi wrote: > Greeting > > I have questions for getting Budget and Status. > There is a way to get daily budget for campains with using Google API. > > However, couln't find any way to getting total budget for account > how much I have. > > If you know, please tell me how. > > and, I'm suggesting that to next version of Google API. > > please, answer me as soon as possible. > > Thanks and have a nice one. > > SunHo Choi. > (R.O. Korea) -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: How do you calculate the API Usage?
Hi Can, The API unit cost is based on the number of items returned in the SOAP XML response. So if your paging is set such that you only get the first 10 items, you will only be charged for those 10 items (even if there are more results). Fetching the next ten items will then charge you for those. The TargetingIdeaService costs 1 unit for each returned idea, so getting a page of 10 ideas would cost 10 units. In addition, the exact number of units charged are returned in the SOAP header of every response, in a field called "units". Best, - Eric Koleda, AdWords API Team On Dec 16, 5:23 pm, hikmetcancelik wrote: > It looks like nobody cares. > I found the answer in case someone needs. The paging is important. > Whether you request all info or just one the calculation is based on > the paging. > > Now it's time to figure out how to check only one (1) keyword data > withouth wasting API units. > > On Dec 15, 4:46 pm, hikmetcancelik wrote: > > > > > I have a hard time calculating the API Usage. > > > Let's say I'm trying to get GLOBAL_MONTHLY_SEARCHES and COMPETITION > > for 10 keywords. The paging is (0,10) (I'm not sure if this affects > > the usage). > > Since TargetingIdeaService get call costs 1 unit per TargetingIdea, is > > checking 10 keywords will cost 100 units or 1000 units? > > > Thanks, > > Can -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Fault: 1 Code: soapenv:Server.userException String: The request xml was invalid.
Hi, This error is being generated client side, because an ampersand cannot appear unencoded in an XML document (your SOAP request). If you want to send an ampersand you must encode it as: & Best, - Eric Koleda, AdWords API Team On Dec 15, 7:28 pm, hikmetcancelik wrote: > I'm having problems with TrafficEstimatorService. Whenever the > function tries to get info for a keyword that has "&" it gives this > error. I can strip the "&" but then the keyword is totally different. -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: ad group criteria selector issue: python 8.0.0, v200909
Hi David, The selector for AdGroupCriteria works a little differently than other selectors, and doesn't have an adGroupId field: http://code.google.com/apis/adwords/v2009/docs/reference/AdGroupCriterionService.AdGroupCriterionSelector.html Instead, a set of AdGroupCriterionIdFilters can be used: http://code.google.com/apis/adwords/v2009/docs/reference/AdGroupCriterionService.AdGroupCriterionIdFilter.html An example request would look like: 1371763225 Best, - Eric Koleda, AdWords API Team On Dec 15, 6:45 pm, david wrote: > Hi, > > The selector for ad group criteria does not appear to have any effect: > > selector = { > 'adGroupId': adgroup_id, > } > > crits = myservices.adgroup_criterion.Get(selector) > > This gets *all* criteria for all groups in all campaigns in the > account! > > If I put other meaningless things in the selector, they are ignored > (with no errors). > > In other words, no matter what I try, the selector is equivalent to > > {} > > Am I doing something wrong? > > Or is this a bug? > > Also, if you don't want stats, but only the criteria values, how to > you specify? > > Thanks! > > David -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
Re: AdWords API v2009 Hack Days
Hi Ursula, At this point there are no plans to have Hack Days at other locations in the US, but thanks for the interest. Plus, this event could be a great excuse to get away from the Chicago cold and spend some time in sunny San Francisco! Best, - Eric On Dec 15, 6:35 pm, Ursula wrote: > Sounds greathow about one for us Chicago users? > > On Dec 14, 5:49 pm, AdWords API Advisor > wrote: > > > > > Have you been putting off migrating to v2009? Not sure where to start? > > Been way too busy? Well it's time to jump start your v2009 development > > with some in-person help from Google. Join us in Mountain View or New > > York for a full day of non-stop v2009 hacking. > > > To keep things interesting throughout the day, we'll do some coding > > demos of the cool things you can do with v2009 that weren't possible > > in v13, like asynchronous calls, dynamic ad parameters, and more. > > Non-engineers beware! This is a developer-only event, and there will > > be no content or activities for attendees who don't plan to write > > code. > > > Space is limited, and signups are on a first come, first serve basis. > > We ask that you limit attendees to two people per company. If you are > > based in Europe please don't register yet, as a similar EMEA event is > > in the works and will be announced shortly. > > > More information and the signup form are available > > here:http://sites.google.com/site/v2009hackdays/ > > > Best, > > - Eric Koleda, AdWords API Team -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: estimateKeywordList returns 0 cpc for "vacations"
Hi, Thank you for bringing this to our attention. I was able to replicate the behavior and have raised the issue to our core engineering team. I'll update this thread when I have more information. Best, - Eric Koleda, AdWords API Team On Dec 15, 4:43 pm, noelbk wrote: > I'm using TrafficEstimatorService.estimateKeywordList to get the cost > per click for several keywords. However, a bunch of them that should > have a positive cost per click have 0. For example, "vacation" has a > lowerCpc of $0.716, but "vacations" has 0 lowerCpc and upperCpc. > Typing "vacations" into the TrafficEstimatorSandbox [1], I get a CPC > of $1.71 - $2.35. Why doesn't estimateKeywordList return the same > thing? > > [1]https://adwords.google.com/select/TrafficEstimatorSandbox > > Here is output from a sample Perl program [below] showing "vacation" > with cpc of 2.02-2.52, and "vacations" with cpc of 0-0. > > $ ./estimateKeywordList.t vacation vacations > > estimateKeywordList > keywordRequest=$VAR1 = bless( { > 'maxCpc' => 1, > 'text' => 'vacation', > 'type' => 'Broad' > }, 'Google::Adwords::KeywordRequest' ); > > keywordEstimates=$VAR1 = [ > bless( { > 'upperClicksPerDay' => '5234.62', > 'lowerCpc' => '2015624', > 'lowerClicksPerDay' => '5214.775', > 'id' => '-1', > 'upperAvgPosition' => '3.0', > 'upperCpc' => '2519531', > 'lowerAvgPosition' => '1.0' > }, 'Google::Adwords::KeywordEstimate' ) > ]; > > estimateKeywordList > keywordRequest=$VAR1 = bless( { > 'maxCpc' => 1, > 'text' => 'vacations', > 'type' => 'Broad' > }, 'Google::Adwords::KeywordRequest' ); > > keywordEstimates=$VAR1 = [ > bless( { > 'upperClicksPerDay' => '0.0', > 'lowerCpc' => '0', > 'lowerClicksPerDay' => '0.0', > 'id' => '-1', > 'upperAvgPosition' => '0.0', > 'upperCpc' => '0', > 'lowerAvgPosition' => '0.0' > }, 'Google::Adwords::KeywordEstimate' ) > ]; > > - > Here's the sample program that produces the output above: > > #! /usr/bin/perl -w > =head1 NAME > > estimateKeywordList.t - test Google's > TrafficEstimatorService.estimateKeywordList > > =head1 SYNOPSIS > > estimateKeywordList.t [options] keyword [options] keyword ... > > Options: > -t --type Broad, Exact, or Phrase > -c --cpc Cost per click, in dollars > > =head1 AUTHOR > > Noel Burton-Krahn > n...@burton-krahn.com > > =cut > > use strict; > > use Google::Adwords::TrafficEstimatorService; > use Google::Adwords::KeywordRequest; > use Data::Dumper; > use Getopt::Long; > > my $service = Google::Adwords::TrafficEstimatorService->new() > ->email('XX') > ->password('XX') > ->clientCustomerId('744-219-7833') > ->api_version('v13') > ->applicationToken('XX) > ->developerToken('XX') > ; > > my $match_type = 'Broad'; > my $cpc = 100; > my $country = 'US'; > > sub lookup { > my($keyword) = @_; > > my $keywordRequest = Google::Adwords::KeywordRequest->new > ->text($keyword) > ->type($match_type) > ->maxCpc($cpc*100); > > my @keywordEstimates = $service->estimateKeywordList > ($keywordRequest); > > print("estimateKeywordList" > . "\nkeywordRequest=" . Dumper($keywordRequest) > . "\nkeywordEstimates=" . Dumper(\...@keywordestimates) > . "\n"); > > } > > GetOptions('type|t=s' => \$match_type, > 'cpc|c=i' => \$cpc, > 'country=s' => \$country, > '<>' => \&lookup); -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Looking to have 1 api only user account for multiple MCCs
Hi Mike, A parent MCC can link to many sub MCCs using API-only links. However, a child MCC can only have one APO-only link up to a parent. Please double check that you are doing the linking correctly. Best, - Eric Koleda, AdWords API Team On Dec 15, 12:55 pm, "mik...@getastart.com" wrote: > I have 2 different types of businesses, so I have to different MCC > accounts. I am working on some software that will use the APIs, so I > want to create an api only account. Is it possible for 1 API Only > user account to have access to both of my MCCs? I got this error when > I tried to link it to the second account: 831-XXX-XXX Customer 831- > XXX-XXX is assigned to another manager for API Access. > > Thanks, > Mike -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Problem with PHP ext/SOAP
Hi Rajesh, Those look like valid ad group IDs. What is the issue you run into when trying to add keywords? Best, - Eric Koleda, AdWords API Team On Dec 15, 12:38 pm, nsrajesh wrote: > hi all > i am gettings adgroupids like this 5000112823, 5000112824 etc (see > the xml below...) so i am having problem when i try to add a keyword. > right now i am using adwords soap environment. > > please help me on this.. > > thanks > rajesh > > https://adwords.google.com/api/adwords/cm/ > v200909"> > > 25 > AdGroupPage > > 5000112822 > 59393 > Campaign #1260818577 > Test Batch 59 US59 > PAUSED > http://www.w3.org/2001/XMLSchema-instance"; > xsi:type="ManualCPCAdGroupBids"> > ManualCPCAdGroupBids > > > Money > 1 > > > > > ALL > Stats > > > > 5000112823 > 59393 > Campaign #1260818577 > Test Batch 60 US60 > PAUSED > http://www.w3.org/2001/XMLSchema-instance"; > xsi:type="ManualCPCAdGroupBids"> > ManualCPCAdGroupBids > > > Money > 1 > > > > > ALL > Stats > > > > 5000112824 > 59393 > Campaign #1260818577 > Test Batch 61 US61 > PAUSED > http://www.w3.org/2001/XMLSchema-instance"; > xsi:type="ManualCPCAdGroupBids"> > ManualCPCAdGroupBids > > > ALL > Stats > > > > 5000112825 > 59393 > Campaign #1260818577 > Test Batch 62 US62 > PAUSED > http://www.w3.org/2001/XMLSchema-instance"; > xsi:type="ManualCPCAdGroupBids"> > ManualCPCAdGroupBids > > > ALL > Stats > > > > 5000112826 > 59393 > Campaign #1260818577 > Test Batch 63 US63 > PAUSED > http://www.w3.org/2001/XMLSchema-instance"; > xsi:type="ManualCPCAdGroupBids"> > ManualCPCAdGroupBids > > > ALL > Stats > > -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Deleting a text ad in order to change a field
Hi Ven, For AdGroupAds, setting the status to DISABLED or using the REMOVE operator has the same effect. AdGroupAds can never be fully deleted, and they will always exist in your account with the status DISABLED. There is no name uniqueness requirement for ads so there should never be a problem creating a new ad with similar settings. The new ad will not share any of the history with the old ad. Best, - Eric Koleda, AdWords API Team On Dec 16, 3:52 pm, "sem...@proventactics.com" wrote: > I am struggling with the same issue here. I think using the REMOVE > operator might work even I haven't tried it yet. It might let you > create a new ad but I think you'll probably loose all the stats and > related data. In AdWords Interface, if you click on editing an ad, a > popup notification says: > > You can edit this ad. > Changing the ad will delete the existing ad and create a new one. The > new ad will begin with statistics at zero, and statistics for the old > ad will be shown in the "Deleted ads" row. > > Cheers! > > On Dec 16, 2:04 pm, ComputerPsi wrote: > > > > > Bounce. Would anybody like to answer my post? :) > > > On Dec 15, 12:20 pm, ComputerPsi wrote: > > > > From what I understand, in order to change a text ad, you must delete > > > the original, and then create a new text ad. > > > > I have the whole v200909 code > > > fromhttp://code.google.com/p/google-api-adwords-php/downloads/list. > > > Looking through the sample, I was able to add an ad group with a text > > > ad and keywords. > > > However I want to now modify a text ad that was created. In > > > UpdateAd.php, I found that it pauses the ad. From what I understand > > > "SET"ing it to "DISABLED" won't remove it. > > > Should I use the "REMOVE" command instead of "SET"? Will this allow me > > > to create an alternative text ad with the same name as this removed > > > one? > > > When using "REMOVE" operator in AdGroupAdOperation, what should the > > > status be set to for AdGroupAd? It has options ENABLED, PAUSED, and > > > DISABLED. > > > > Thank you, > > > Ven -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API proximity targets - conflict between adwords API and adwords UI
Hi, I would appreciate any ideas on the foolowing issue: I’ve encountered a problem using the api for downloading/uploading campaigns with proximity targets. In adwords it is possible to define a proximity target with a 500 miles radius (804,762 meters), but via the api you can only create a target with a 800,000 meter radius (so you can't update a campaign you downloaded). Any ideas how to work around this? Thanks, Guy -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en. -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: Sandbox v200909 - Limit per Account
Hi, Campaign names are unique and you cannot create new campaign with the same name as deleted campaign (because deleted campaigns are still there, just with deleted status). You have few options: a) Don’t create a new campaign, just un-delete the campaign with the same name. For that you need to change deleted campaigns status and set correct start and end dates. b) You have 5 clients on SandBox (client_1, client_2, etc.). If you reached campaign limit, just use another (empty client). c) All sandbox accounts are cleaned once a month, that will purge deleted campaigns in your original client. Regards, -- Zeljko GemBox.Ppc - http://www.GemBoxSoftware.com/Ppc/Overview.htm - Manage AdWords data from C# / VB.NET applications. On Dec 17, 10:49 am, Faisal Dgs wrote: > Hi All, > > I think there is a limit of 25 campaigns per account for Sandbox. > Please correct me I am wrong here. > > My problem is that I have created a campaign named "Test" and it's > status is Active by default. Now if I set it's status to Deleted and I > try to create to another campaign named "Test" I am getting duplicate > campaign name error :( > > If a campaign is deleted then there are no chances of pausing or > activating that particular campaign(very true in my case). So I should > be able to create campaign with a similar name of deleted campaign. > Any workarounds for this problem because this is really driving me > crazy :( > > May be it sounds logical but it should be only for production why > sandbox isn't allowing this??? > > Thanks, > Faisal -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Sample code for v2009
Hi, Is it possible to have the same as http://code.google.com/intl/fr-FR/apis/adwords/docs/samples.html for the v2009 of the api adwords? Cause here i'm totally lost Regards -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Sandbox v200909 - Limit per Account
Hi All, I think there is a limit of 25 campaigns per account for Sandbox. Please correct me I am wrong here. My problem is that I have created a campaign named "Test" and it's status is Active by default. Now if I set it's status to Deleted and I try to create to another campaign named "Test" I am getting duplicate campaign name error :( If a campaign is deleted then there are no chances of pausing or activating that particular campaign(very true in my case). So I should be able to create campaign with a similar name of deleted campaign. Any workarounds for this problem because this is really driving me crazy :( May be it sounds logical but it should be only for production why sandbox isn't allowing this??? Thanks, Faisal -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.
AdWords API Re: v2009 equivalent of ApiError.getIndex()?
Hi, No, ApiError array is not indexed the same as input array. If in input array 3rd item has an error, then the first item in ApiError array will point to the 3rd item (it can't point to first because first item in input array didn't had any error). In v2009 ApiError has new property: fieldPath (http://code.google.com/ apis/adwords/v2009/docs/reference/ CampaignService.ApiError.html#fieldPath) - The OGNL field path to identify cause of error. You can extract Index from there. For example, if 3rd item in input array had some error ApiError.fieldPath would be something like "operations[3].operand.criterion.text". Here some code (C#) that we use for extracting index: string text = this.FieldPath ?? String.Empty; Regex extractIndex = new Regex(@"operations\[(? \d+)\].*", RegexOptions.Compiled | RegexOptions.CultureInvariant); Match m = extractIndex.Match(text); if (m == null || !m.Success) return -1; else { int result; return int.TryParse(m.Groups["index"].Value, out result) ? result : -1; } Regards, -- Josip GemBox.Ppc - http://www.GemBoxSoftware.com/Ppc/Overview.htm - Advanced AdWords API for C# / VB.NET -- You received this message because you are subscribed to the Google Groups "AdWords API Forum" group. To post to this group, send email to adwords-...@googlegroups.com. To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en.