Re: [AFMUG] Buffer tube breakout kit
I’ve never seen such an animal. Inside a cabinet I’d normally say the buffer tube itself is good enough protection. We’ve been using a FiberOne cassette system which has a door on the rear. OSP cable goes into the panel, and the buffer tubes all end up behind the door. I don’t know how they compare to Clearfield. I’d also wonder if there’s a cover or housing you can screw onto the back side of the rack behind your cassette system. Just cover the buffer tubes with steel. Maybe something like this: https://www.racksolutions.com/front-cover-for-open-frame-wall-mount-rack.html There’s a way I terminated loose tube drop cable. In the drop cable scenario it’s furcation tubing over the 250um and a heat shrink tube to join the furcation tube with the buffer tube, and then a bigger heat shrink tube to join the drop cable jacket to the smaller heat shrink. Then obviously an SOC or what have you goes at the end of the furcation tube. It works out well for the drop cable. For a similar thing with the buffer tubes you could source a roll of 2.5mm to 3mm ID tubing of whatever kind of plastic you like. If you get clear tubing you could still see the color of buffer tube. A 3mm ID tubing would have a 5mm OD. A bundle of twelve 5mm tubes would have a 20mm OD. Almost twice as big as a 144F OSP cable itself, but a 4:1 heatshrink tube should be able to squish down on all of it. The adhesive heat shrink is quite stiff after shrinking so it would prevent that joint from bending much…..which is desirable I think. Never done that, but I think it would work. I’m gonna circle back to why though? You got monkeys playing in the fiber cabinet? From: AF On Behalf Of Carl Peterson Sent: Thursday, May 11, 2023 6:20 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Buffer tube breakout kit I'm looking for a kit to break out / protect individual buffer tunes on their way to a clearfield patch and splice cassette. Just something to clamp on the end or the cable and protect the buffer tubes on the way to the cassettes inside the cabinet, not to breakout the individual fibers. Like a spider kit except just to feed the buffer tubes into. Anyone know of anything like this? -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Buffer tube breakout kit
https://crimpsupply.com/3-4-yellow-spiral-bundling-wrap-around-sleeving.html From: Chuck McCown via AF Sent: Thursday, May 11, 2023 5:07 PM To: AnimalFarm Microwave Users Group Cc: ch...@go-mtc.com Subject: Re: [AFMUG] Buffer tube breakout kit We use a plastic spiral wire guard. Not sure what the official name is. From: Carl Peterson Sent: Thursday, May 11, 2023 4:19 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Buffer tube breakout kit I'm looking for a kit to break out / protect individual buffer tunes on their way to a clearfield patch and splice cassette. Just something to clamp on the end or the cable and protect the buffer tubes on the way to the cassettes inside the cabinet, not to breakout the individual fibers. Like a spider kit except just to feed the buffer tubes into. Anyone know of anything like this? -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Buffer tube breakout kit
We use a plastic spiral wire guard. Not sure what the official name is. From: Carl Peterson Sent: Thursday, May 11, 2023 4:19 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Buffer tube breakout kit I'm looking for a kit to break out / protect individual buffer tunes on their way to a clearfield patch and splice cassette. Just something to clamp on the end or the cable and protect the buffer tubes on the way to the cassettes inside the cabinet, not to breakout the individual fibers. Like a spider kit except just to feed the buffer tubes into. Anyone know of anything like this? -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
[AFMUG] Buffer tube breakout kit
I'm looking for a kit to break out / protect individual buffer tunes on their way to a clearfield patch and splice cassette. Just something to clamp on the end or the cable and protect the buffer tubes on the way to the cassettes inside the cabinet, not to breakout the individual fibers. Like a spider kit except just to feed the buffer tubes into. Anyone know of anything like this? -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
