[AFMUG] 450m Pictures Needed

[Matt Mangriotis]

Now that folks are getting their 450m APs and starting to deploy them, I would 
really love to get some high resolution images of cnMedusa in the field.  You 
can send them directly to me or post them in our forum.

Pictures that we can use will get a shirt and/or hat sent back...

Thanks!
Matt

m...@cambiumnetworks.com

Re: [AFMUG] Linktechs POE

[Josh Luthman]

One of the best tools for a WISP.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Dec 15, 2016 4:49 PM, "Jay Weekley"  wrote:

> So, you like them?
>
> Josh Luthman wrote:
>
>> Just ordered my second one yesterday
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Dec 15, 2016 1:28 PM, "SmarterBroadband" > > wrote:
>>
>> We just wanted to change the SSID to include the name of each
>> installer.
>>
>> *From:*Af [mailto:af-boun...@afmug.com
>> ] *On Behalf Of *Dennis Burgess
>> *Sent:* Thursday, December 15, 2016 12:19 PM
>> *To:* af@afmug.com 
>> *Subject:* Re: [AFMUG] Linktechs POE
>>
>> 99% of the time should be use it out of the box, no configuration
>> necessary, even though a good charge would be helpful.
>>
>> */_Dennis Burgess_/**–**Network Solution Engineer – Consultant *
>>
>> MikroTik Certified Trainer/Consultant
>> 
>> – MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE
>>
>> For Wireless Hardware/Routers visit www.linktechs.net
>> 
>>
>> Radio Frequiency Coverages: www.towercoverage.com
>> 
>>
>> Office: 314-735-0270 
>>
>> E-Mail: dmburg...@linktechs.net 
>>
>> *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of
>> *SmarterBroadband
>> *Sent:* Thursday, December 15, 2016 2:17 PM
>> *To:* af@afmug.com 
>> *Subject:* Re: [AFMUG] Linktechs POE
>>
>> Yep, we bought one and were not able to configure using their
>> instructions.  Went on to other thinks, it is still on my table
>> awaiting another look.
>>
>> *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Darin Steffl
>> *Sent:* Thursday, December 15, 2016 12:09 PM
>> *To:* af@afmug.com 
>> *Subject:* Re: [AFMUG] Linktechs POE
>>
>> We bought two.
>>
>>  One doesn't power on and the second turns on but I can't get it
>> to work. Not able to login to our cpe like we do with airgateway.
>> Also not able to configure it using their instructions.
>>
>> I need to call them and get help or send them back.
>>
>> On Thu, Dec 15, 2016 at 1:48 PM Josh Reynolds
>> mailto:j...@kyneticwifi.com>> wrote:
>>
>> Right, and you can - that's the point of it. You just have to
>> use a good battery pack.
>>
>> On Dec 15, 2016 1:45 PM, "Jay Weekley"
>> mailto:par...@cyberbroadband.net>>
>> wrote:
>>
>> The idea was to power both the gateway and the installation
>> radio from the same battery and use the wifi for a tetherless
>> connection.
>>
>>
>>
>>
>>
>> Josh Reynolds wrote:
>>
>>
>>
>> Need a decent battery that can supply 2.5+A.
>>
>>
>>
>>
>>
>> Anker makes some good ones.
>>
>>
>>
>>
>>
>> Wait, why were you trying to power multiple things off of one?
>> It's made for radio alignment / installation.
>>
>>
>>
>>
>>
>> On Dec 15, 2016 1:37 PM, "Jay Weekley"
>> mailto:par...@cyberbroadband.net>
>> > >> wrote:
>>
>>
>>
>>
>>
>> I've got two but we were never able to get one to power
>> both the
>>
>>
>> Gateway and radio off of the USB battery we were using and
>>
>>
>> eventually went back to the drill battery.
>>
>>
>>
>>
>>
>> Josh Reynolds wrote:
>>
>>
>>
>>
>>
>> "Found this in Google..."
>>
>>
>>
>>
>>
>> Airgateway Pro Installer
>>
>>
>>
>>
>>
>> https://dl.ubnt.com/datasheets/airgateway/airGateway_Pro_
>> Installer_DS.pdf
>> > Installer_DS.pdf>
>>
>>
>>> ts/airgateway/airGateway_Pro_Installer_DS.pdf
>> > Installer_DS.pdf>>
>>
>>
>>
>>
>>
>> On Dec 15, 2016 1:03 PM, "Jay Weekley"
>>
>>
>> > 
>> > >
>>
>>
>> > 
>>
>>
>> > >
>>
>>
>>
>>
>> Has anyone tried this?  Like it? Don't like it?
>>
>>
>>
>>
>>
>> http://www.linktechs.net/productcart/pc/viewPrd.asp?idproduc
>> t=2251&idcategory=
>> 

Re: [AFMUG] 450m Pictures Needed

[Mark Radabaugh]

Send me one and I’ll send you all the pictures you want :-)

Better yet - 4, and I’ll get you the cool drone video circling the tower…

Mark

> On Dec 16, 2016, at 9:52 AM, Matt Mangriotis 
>  wrote:
> 
> Now that folks are getting their 450m APs and starting to deploy them, I 
> would really love to get some high resolution images of cnMedusa in the 
> field.  You can send them directly to me or post them in our forum.
> 
> Pictures that we can use will get a shirt and/or hat sent back...
> 
> Thanks!
> Matt
> 
> m...@cambiumnetworks.com
> 
> 
> 
> 

Re: [AFMUG] 450m Pictures Needed

[Gino Villarini]

I got some new hi res pics coming in today… I can sell you the rights to them 
:-)

From: Af mailto:af-boun...@afmug.com>> on behalf of Mark 
Radabaugh mailto:m...@amplex.net>>
Reply-To: "af@afmug.com" 
mailto:af@afmug.com>>
Date: Friday, December 16, 2016 at 11:22 AM
To: "af@afmug.com" mailto:af@afmug.com>>
Subject: Re: [AFMUG] 450m Pictures Needed

Send me one and I’ll send you all the pictures you want :-)

Better yet - 4, and I’ll get you the cool drone video circling the tower…

Mark




Gino Villarini


President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

[cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

On Dec 16, 2016, at 9:52 AM, Matt Mangriotis 
mailto:matt.mangrio...@cambiumnetworks.com>>
 wrote:

Now that folks are getting their 450m APs and starting to deploy them, I would 
really love to get some high resolution images of cnMedusa in the field.  You 
can send them directly to me or post them in our forum.

Pictures that we can use will get a shirt and/or hat sent back...

Thanks!
Matt

m...@cambiumnetworks.com

Re: [AFMUG] CMM5 vs Packetflux

[Brian Sullivan]

I found a "Brand X" POE adapter with an output of:
54V - 1.5A (80W)+ on (1,2) (4,5)  and - on (7,8) (3,6)

Is this a sufficient POE?  Found them for $29.00

On 12/14/2016 11:07 PM, Forrest Christian (List Account) wrote:
You can power the medusa in any of several different ways The 
stock power supply, a PacketFlux PowerInjector+Sync, some of Chuck's 
products, etc.

[AFMUG] Does 450M AP support 13.x & 14.x SMs?

[Gino Villarini]

Need to know



Gino Villarini


President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

[cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

Re: [AFMUG] 450m Pictures Needed

[Jaime Solorza]

Discount if Ginos pics are sideways. I know I know.  Mine are out of
focus...

On Dec 16, 2016 8:25 AM, "Gino Villarini"  wrote:

> I got some new hi res pics coming in today… I can sell you the rights to
> them :-)
>
> From: Af  on behalf of Mark Radabaugh <
> m...@amplex.net>
> Reply-To: "af@afmug.com" 
> Date: Friday, December 16, 2016 at 11:22 AM
> To: "af@afmug.com" 
> Subject: Re: [AFMUG] 450m Pictures Needed
>
> Send me one and I’ll send you all the pictures you want :-)
>
> Better yet - 4, and I’ll get you the cool drone video circling the tower…
>
> Mark
>
>
>
> *Gino Villarini*
> President
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
>
> On Dec 16, 2016, at 9:52 AM, Matt Mangriotis  cambiumnetworks.com> wrote:
>
> Now that folks are getting their 450m APs and starting to deploy them, I
> would really love to get some high resolution images of cnMedusa in the
> field.  You can send them directly to me or post them in our forum.
>
> Pictures that we can use will get a shirt and/or hat sent back...
>
> Thanks!
> Matt
>
> m...@cambiumnetworks.com
>
>
>
>
>
>

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[Sean Heskett]

Negative.

SMs need to be on 15.x


On Fri, Dec 16, 2016 at 8:30 AM Gino Villarini  wrote:

>
>
>
>
>
>
>
>
>
>
> Need to know
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *Gino Villarini*
>
>
>
>
>
> President
>
>
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
>
>
>
>
>
>
>
>
>
>
>
>
>

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[George Skorup]

15.0.1 release notes:

450 SM's running 13.2.1 (or older) will not register to a 450m AP. As of 
7th November
2016, some SM's are still being factory shipped with 13.2.1 code. 
Although this is being
corrected to ship with newer software, any SM's received that are 
intended for

deployment on a 450m will have to be bench upgraded prior to deployment.

On 12/16/2016 10:30 AM, Gino Villarini wrote:

Need to know

*//*

*/Gino Villarini/*

President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[Bill Prince]

So this means there is no "bridge", so to speak, to 430 SMs?


bp


On 12/16/2016 9:14 AM, George Skorup wrote:

15.0.1 release notes:

450 SM's running 13.2.1 (or older) will not register to a 450m AP. As 
of 7th November
2016, some SM's are still being factory shipped with 13.2.1 code. 
Although this is being
corrected to ship with newer software, any SM's received that are 
intended for

deployment on a 450m will have to be bench upgraded prior to deployment.

On 12/16/2016 10:30 AM, Gino Villarini wrote:

Need to know�

*//*�

*/Gino Villarini/*

President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[Sean Heskett]

430 SMs will also need to be upgraded to 15.x

-sean


On Fri, Dec 16, 2016 at 10:21 AM, Bill Prince  wrote:

> So this means there is no "bridge", so to speak, to 430 SMs?
>
>
> bp
> 
>
>
> On 12/16/2016 9:14 AM, George Skorup wrote:
>
> 15.0.1 release notes:
>
> 450 SM's running 13.2.1 (or older) will not register to a 450m AP. As of
> 7th November
> 2016, some SM's are still being factory shipped with 13.2.1 code. Although
> this is being
> corrected to ship with newer software, any SM's received that are intended
> for
> deployment on a 450m will have to be bench upgraded prior to deployment.
>
> On 12/16/2016 10:30 AM, Gino Villarini wrote:
>
> Need to know�
>
> �
>
> *Gino Villarini*
> President
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
>
>
>
>

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[George Skorup]

Uhh, I thought I heard that 430 SMs are not supported at all on the 450m?

On 12/16/2016 11:24 AM, Sean Heskett wrote:

430 SMs will also need to be upgraded to 15.x

-sean


On Fri, Dec 16, 2016 at 10:21 AM, Bill Prince > wrote:


So this means there is no "bridge", so to speak, to 430 SMs?


bp


On 12/16/2016 9:14 AM, George Skorup wrote:

15.0.1 release notes:

450 SM's running 13.2.1 (or older) will not register to a 450m
AP. As of 7th November
2016, some SM's are still being factory shipped with 13.2.1 code.
Although this is being
corrected to ship with newer software, any SM's received that are
intended for
deployment on a 450m will have to be bench upgraded prior to
deployment.

On 12/16/2016 10:30 AM, Gino Villarini wrote:

Need to know�

*//*�

*/Gino Villarini/*

President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[Bill Prince]

That's what I heard too. I just haven't gotten it explicitly.


bp


On 12/16/2016 9:28 AM, George Skorup wrote:

Uhh, I thought I heard that 430 SMs are not supported at all on the 450m?

On 12/16/2016 11:24 AM, Sean Heskett wrote:

430 SMs will also need to be upgraded to 15.x

-sean


On Fri, Dec 16, 2016 at 10:21 AM, Bill Prince > wrote:


So this means there is no "bridge", so to speak, to 430 SMs?


bp


On 12/16/2016 9:14 AM, George Skorup wrote:

15.0.1 release notes:

450 SM's running 13.2.1 (or older) will not register to a 450m
AP. As of 7th November
2016, some SM's are still being factory shipped with 13.2.1
code. Although this is being
corrected to ship with newer software, any SM's received that
are intended for
deployment on a 450m will have to be bench upgraded prior to
deployment.

On 12/16/2016 10:30 AM, Gino Villarini wrote:

Need to know�

*//*�

*/Gino Villarini/*

President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[Gino Villarini]

Noted, so 14.x will register

From: Af mailto:af-boun...@afmug.com>> on behalf of 
"geo...@cbcast.com" 
mailto:geo...@cbcast.com>>
Reply-To: "af@afmug.com" 
mailto:af@afmug.com>>
Date: Friday, December 16, 2016 at 1:14 PM
To: "af@afmug.com" mailto:af@afmug.com>>
Subject: Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

15.0.1 release notes:

450 SM's running 13.2.1 (or older) will not register to a 450m AP. As of 7th 
November
2016, some SM's are still being factory shipped with 13.2.1 code. Although this 
is being
corrected to ship with newer software, any SM's received that are intended for
deployment on a 450m will have to be bench upgraded prior to deployment.




Gino Villarini


President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

[cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

On 12/16/2016 10:30 AM, Gino Villarini wrote:
Need to know�

�

Gino Villarini


President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

[cid:part1.A56D5CA9.9A23DFF4@cbcast.com]

Re: [AFMUG] Does 450M AP support 13.x & 14.x SMs?

[Jeff Broadwick - Lists]

That's correct.  No 430 on the M

Jeff Broadwick
ConVergence Technologies, Inc.
312-205-2519 Office
574-220-7826 Cell
jbroadw...@converge-tech.com

> On Dec 16, 2016, at 12:28 PM, George Skorup  wrote:
> 
> Uhh, I thought I heard that 430 SMs are not supported at all on the 450m?
> 
>> On 12/16/2016 11:24 AM, Sean Heskett wrote:
>> 430 SMs will also need to be upgraded to 15.x
>> 
>> -sean
>> 
>> 
>>> On Fri, Dec 16, 2016 at 10:21 AM, Bill Prince  wrote:
>>> So this means there is no "bridge", so to speak, to 430 SMs?
>>> 
>>> 
>>> bp
>>> 
>>> 
 On 12/16/2016 9:14 AM, George Skorup wrote:
 15.0.1 release notes:
 
 450 SM's running 13.2.1 (or older) will not register to a 450m AP. As of 
 7th November
 2016, some SM's are still being factory shipped with 13.2.1 code. Although 
 this is being
 corrected to ship with newer software, any SM's received that are intended 
 for
 deployment on a 450m will have to be bench upgraded prior to deployment.
 
> On 12/16/2016 10:30 AM, Gino Villarini wrote:
> Need to know�
> �
> 
> Gino Villarini
> 
> President
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
> 
> 
 
>>> 
>> 
> 

[AFMUG] Powerline adapters

[Travis Johnson]

Hi,

I just received some Powerline adapters from TP-Link off Amazon. I think 
they were $38 for two single port units. Literally a 10 second setup and 
they are working perfectly.


This was for an 1,800sqft office space that had so much 2.4ghz noise 
(over 30 Wifi names show up on a scan) that even inside a wide open 
office, the coverage was terrible.


Just wanted to share... Powerline stuff has come a long way in the last 
3-4 years. :)


Travis

Re: [AFMUG] Powerline adapters

[Jason McKemie]

I picked up some units from Monoprice a few months back - they also work
pretty well.

On Fri, Dec 16, 2016 at 1:27 PM, Travis Johnson  wrote:

> Hi,
>
> I just received some Powerline adapters from TP-Link off Amazon. I think
> they were $38 for two single port units. Literally a 10 second setup and
> they are working perfectly.
>
> This was for an 1,800sqft office space that had so much 2.4ghz noise (over
> 30 Wifi names show up on a scan) that even inside a wide open office, the
> coverage was terrible.
>
> Just wanted to share... Powerline stuff has come a long way in the last
> 3-4 years. :)
>
> Travis
>
>

Re: [AFMUG] Powerline adapters

[That One Guy /sarcasm]

ive been thinking about getting into these for installers to use. Do they
use the mechanical ground or what or do they still have to be on the same
leg in the panel?

On Fri, Dec 16, 2016 at 1:40 PM, Jason McKemie <
j.mcke...@veloxinetbroadband.com> wrote:

> I picked up some units from Monoprice a few months back - they also work
> pretty well.
>
> On Fri, Dec 16, 2016 at 1:27 PM, Travis Johnson  wrote:
>
>> Hi,
>>
>> I just received some Powerline adapters from TP-Link off Amazon. I think
>> they were $38 for two single port units. Literally a 10 second setup and
>> they are working perfectly.
>>
>> This was for an 1,800sqft office space that had so much 2.4ghz noise
>> (over 30 Wifi names show up on a scan) that even inside a wide open office,
>> the coverage was terrible.
>>
>> Just wanted to share... Powerline stuff has come a long way in the last
>> 3-4 years. :)
>>
>> Travis
>>
>>
>


-- 
If you only see yourself as part of the team but you don't see your team as
part of yourself you have already failed as part of the team.

Re: [AFMUG] Powerline adapters

[Jaime Solorza]

Metcalfe would be happy

On Dec 16, 2016 12:58 PM, "That One Guy /sarcasm" 
wrote:

> ive been thinking about getting into these for installers to use. Do they
> use the mechanical ground or what or do they still have to be on the same
> leg in the panel?
>
> On Fri, Dec 16, 2016 at 1:40 PM, Jason McKemie <
> j.mcke...@veloxinetbroadband.com> wrote:
>
>> I picked up some units from Monoprice a few months back - they also work
>> pretty well.
>>
>> On Fri, Dec 16, 2016 at 1:27 PM, Travis Johnson  wrote:
>>
>>> Hi,
>>>
>>> I just received some Powerline adapters from TP-Link off Amazon. I think
>>> they were $38 for two single port units. Literally a 10 second setup and
>>> they are working perfectly.
>>>
>>> This was for an 1,800sqft office space that had so much 2.4ghz noise
>>> (over 30 Wifi names show up on a scan) that even inside a wide open office,
>>> the coverage was terrible.
>>>
>>> Just wanted to share... Powerline stuff has come a long way in the last
>>> 3-4 years. :)
>>>
>>> Travis
>>>
>>>
>>
>
>
> --
> If you only see yourself as part of the team but you don't see your team
> as part of yourself you have already failed as part of the team.
>

[AFMUG] Ericsson, U.S. Cellular see 9 Gbps in 5G tests | FierceWireless

[Jaime Solorza]

http://www.fiercewireless.com/wireless/ericsson-u-s-cellular-see-9-gbps-5g-tests?mkt_tok=eyJpIjoiTmpjMFpHWTBNakF6WVRJNCIsInQiOiJ1Q2dnajlMZGsyblJRamdXbnlxRHczd0NBdGNtUFF3aVwvaXowVmJyYld1RFN3N2g3R3RHM3lEVVZsWkpSam5jaVNwYzl5akFFd1wvcHFpMElreHZVeVVcL1dUTnErZUdoS1E4NWg1cVhIK01ueG1KODd3d1JNYzVjUzJZTUNaelI4UiJ9&mrkid=27472010&utm_medium=nl&utm_source=internal

Re: [AFMUG] Powerline adapters

[chuck]

They use the neutrals for half the signal so it tends to work on both legs.  

From: That One Guy /sarcasm 
Sent: Friday, December 16, 2016 12:58 PM
To: af@afmug.com 
Subject: Re: [AFMUG] Powerline adapters

ive been thinking about getting into these for installers to use. Do they use 
the mechanical ground or what or do they still have to be on the same leg in 
the panel?

On Fri, Dec 16, 2016 at 1:40 PM, Jason McKemie 
 wrote:

  I picked up some units from Monoprice a few months back - they also work 
pretty well.

  On Fri, Dec 16, 2016 at 1:27 PM, Travis Johnson  wrote:

Hi,

I just received some Powerline adapters from TP-Link off Amazon. I think 
they were $38 for two single port units. Literally a 10 second setup and they 
are working perfectly.

This was for an 1,800sqft office space that had so much 2.4ghz noise (over 
30 Wifi names show up on a scan) that even inside a wide open office, the 
coverage was terrible.

Just wanted to share... Powerline stuff has come a long way in the last 3-4 
years. :)

Travis







-- 

If you only see yourself as part of the team but you don't see your team as 
part of yourself you have already failed as part of the team.

[AFMUG] Canopy For Sale

[SmarterBroadband]

We have used Canopy FSK for sale;

 

5700

 

P10 Qty 41   $25

P11 Qty 72   $30

 

2400

 

P9   Qty 21   $25

P10 Qty 163 $30

 

900

 

P9   Qty 43   $30

P10 Qty 96   $35

 

All tested in house and reset to factory defaults.

 

Guaranteed not DOA for 7 days.

 

You pay shipping.

 

May consider offers for large quantities.

 

Adam

[AFMUG] Just got my 1st set of Siklu 5500d. Now what?

[Sam Lambie]

Well I logged into the ftp section of siklu's site looking for a manual,
firmware updates if needed and any other pertinent info. Nada, Zip, Zilch
I guess this product is so new, that they haven't even posted anything on
their site about it.
Does anyone have a contact that I can talk to by chance on how best to
implement this bad boy?
I can get into it and play with it no problem, just looking for any tips on
them.
Thanks
Sam

-- 
-- 
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com 

Re: [AFMUG] Just got my 1st set of Siklu 5500d. Now what?

[Jesse DuPont]

  
  
They'll likely get a hold of you once you register/activate the
radio.


  
  
  
  
  
  
  
  
  
  
  
  
  
Jesse DuPont

  Network
  Architect
  email: jesse.dup...@celeritycorp.net
  Celerity Networks LLC
  Celerity
  Broadband LLC
Like us! facebook.com/celeritynetworksllc
  Like us! facebook.com/celeritybroadband
  

  

On 12/16/16 3:44 PM, Sam Lambie wrote:


  

  

  Well I logged into the ftp section of siklu's site
looking for a manual, firmware updates if needed and any
other pertinent info. Nada, Zip, Zilch
I guess this product is so new, that they haven't even
posted anything on their site about it.
  
  Does anyone have a contact that I can talk to by chance on
  how best to implement this bad boy?

I can get into it and play with it no problem, just looking
for any tips on them.
  
  Thanks

Sam

  

  

  -- 
  -- 
Sam Lambie
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com

  

  

  


  

Re: [AFMUG] Just got my 1st set of Siklu 5500d. Now what?

[Jaime Solorza]

Try Ben Simon

On Dec 16, 2016 4:25 PM, "Jesse DuPont" 
wrote:

> They'll likely get a hold of you once you register/activate the radio.
>
> *Jesse DuPont*
>
> Network Architect
> email: jesse.dup...@celeritycorp.net
> Celerity Networks LLC
>
> Celerity Broadband LLC
> Like us! facebook.com/celeritynetworksllc
>
> Like us! facebook.com/celeritybroadband
> On 12/16/16 3:44 PM, Sam Lambie wrote:
>
> Well I logged into the ftp section of siklu's site looking for a manual,
> firmware updates if needed and any other pertinent info. Nada, Zip, Zilch
> I guess this product is so new, that they haven't even posted anything on
> their site about it.
> Does anyone have a contact that I can talk to by chance on how best to
> implement this bad boy?
> I can get into it and play with it no problem, just looking for any tips
> on them.
> Thanks
> Sam
>
> --
> --
> *Sam Lambie*
> Taosnet Wireless Tech.
> 575-758-7598 <(575)%20758-7598> Office
> www.Taosnet.com 
>
>
>

Re: [AFMUG] Just got my 1st set of Siklu 5500d. Now what?

[Jaime Solorza]

Sorry. danny...@siklu.com

On Dec 16, 2016 7:00 PM, "Jaime Solorza"  wrote:

> Try Ben Simon
>
> On Dec 16, 2016 4:25 PM, "Jesse DuPont" 
> wrote:
>
>> They'll likely get a hold of you once you register/activate the radio.
>>
>> *Jesse DuPont*
>>
>> Network Architect
>> email: jesse.dup...@celeritycorp.net
>> Celerity Networks LLC
>>
>> Celerity Broadband LLC
>> Like us! facebook.com/celeritynetworksllc
>>
>> Like us! facebook.com/celeritybroadband
>> On 12/16/16 3:44 PM, Sam Lambie wrote:
>>
>> Well I logged into the ftp section of siklu's site looking for a manual,
>> firmware updates if needed and any other pertinent info. Nada, Zip, Zilch
>> I guess this product is so new, that they haven't even posted anything on
>> their site about it.
>> Does anyone have a contact that I can talk to by chance on how best to
>> implement this bad boy?
>> I can get into it and play with it no problem, just looking for any tips
>> on them.
>> Thanks
>> Sam
>>
>> --
>> --
>> *Sam Lambie*
>> Taosnet Wireless Tech.
>> 575-758-7598 <(575)%20758-7598> Office
>> www.Taosnet.com 
>>
>>
>>

Re: [AFMUG] Just got my 1st set of Siklu 5500d. Now what?

[Sam Lambie]

Thanks Jaime


On Fri, Dec 16, 2016 at 7:02 PM, Jaime Solorza 
wrote:

> Sorry. danny...@siklu.com
>
> On Dec 16, 2016 7:00 PM, "Jaime Solorza" 
> wrote:
>
>> Try Ben Simon
>>
>> On Dec 16, 2016 4:25 PM, "Jesse DuPont" 
>> wrote:
>>
>>> They'll likely get a hold of you once you register/activate the radio.
>>>
>>> *Jesse DuPont*
>>>
>>> Network Architect
>>> email: jesse.dup...@celeritycorp.net
>>> Celerity Networks LLC
>>>
>>> Celerity Broadband LLC
>>> Like us! facebook.com/celeritynetworksllc
>>>
>>> Like us! facebook.com/celeritybroadband
>>> On 12/16/16 3:44 PM, Sam Lambie wrote:
>>>
>>> Well I logged into the ftp section of siklu's site looking for a manual,
>>> firmware updates if needed and any other pertinent info. Nada, Zip, Zilch
>>> I guess this product is so new, that they haven't even posted anything
>>> on their site about it.
>>> Does anyone have a contact that I can talk to by chance on how best to
>>> implement this bad boy?
>>> I can get into it and play with it no problem, just looking for any tips
>>> on them.
>>> Thanks
>>> Sam
>>>
>>> --
>>> --
>>> *Sam Lambie*
>>> Taosnet Wireless Tech.
>>> 575-758-7598 <(575)%20758-7598> Office
>>> www.Taosnet.com 
>>>
>>>
>>>


-- 
-- 
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com 

Re: [AFMUG] Powerline adapters

[CBB - Jay Fuller]

have used on several occasions, always works well
especially for a house not wired with cat 5 where you want to use ethernet 
ports ;)

  - Original Message - 
  From: ch...@wbmfg.com 
  To: af@afmug.com 
  Sent: Friday, December 16, 2016 2:19 PM
  Subject: Re: [AFMUG] Powerline adapters


  They use the neutrals for half the signal so it tends to work on both legs.  

  From: That One Guy /sarcasm 
  Sent: Friday, December 16, 2016 12:58 PM
  To: af@afmug.com 
  Subject: Re: [AFMUG] Powerline adapters

  ive been thinking about getting into these for installers to use. Do they use 
the mechanical ground or what or do they still have to be on the same leg in 
the panel?

  On Fri, Dec 16, 2016 at 1:40 PM, Jason McKemie 
 wrote:

I picked up some units from Monoprice a few months back - they also work 
pretty well.

On Fri, Dec 16, 2016 at 1:27 PM, Travis Johnson  wrote:

  Hi,

  I just received some Powerline adapters from TP-Link off Amazon. I think 
they were $38 for two single port units. Literally a 10 second setup and they 
are working perfectly.

  This was for an 1,800sqft office space that had so much 2.4ghz noise 
(over 30 Wifi names show up on a scan) that even inside a wide open office, the 
coverage was terrible.

  Just wanted to share... Powerline stuff has come a long way in the last 
3-4 years. :)

  Travis







  -- 

  If you only see yourself as part of the team but you don't see your team as 
part of yourself you have already failed as part of the team.