Dan,
This sure does. Thanks a bunch. Once I finish this I'm gonna grab me some
adult beverage.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Dec 8, 2014 at 4:30 PM, Dan Sullivan via Af af@afmug.com wrote:
Hi Josh,
Please find attached the ePMP CLI User Manual. This will be posted on
support.cambiumnetworks.com in the near future.
On Page 7, section 3.1.1 are specific instructions for changing the device
IP address in bridge mode. The example here shows how to change all
parameters. First, you do a “config set parameter value” for each
parameter you want to update. Second, you do a “config save” to save the
changes permanently. Third, you do a “config apply” so that you start
using the parameters. 3.1.1 changes only the IP address first, but
probably you want to do a “config set” on all the networking parameters
before you issue your “config save” and “config apply”.
Page 11 lists the parameter for the Bridge IP address (i.e.
networkBridgeIPAddr). Page 9 lists the parameter for the LAN IP address
while in NAT mode on the SM (i.e. networkLanIPAddr). Page 10 lists the
parameter for the WAN IP address while in NAT mode on the SM (i.e.
networkWanIPAddr). Associated Netmask, GatewayIP, etc parameters are
listed right by these.
Hopefully this will improve your Monday.
Dan Sullivan
Cambium Networks
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman via
Af
*Sent:* Monday, December 08, 2014 2:46 PM
*To:* af@afmug.com
*Subject:* [AFMUG] Cambium support, ePMP
I just called and asked for some help/documentation on changing the IP of
an AP from SSH since I can't get to the web interface at this point
(Powercode problems, augh)
They sent me the User Guide and directed me to page 85. Details on how to
use the Quick Start. From the web interface.
Is Monday over yet?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373