[AFMUG] Odd Nanobridge problem

[Jay Weekley]

We have a 5.7 Nanobridge acting as an AP that serves two tower sites 
that are close together.  After a storm yesterday we started getting a 
lot of packet loss when pinging the AP.   We can disconnect either of 
the SMs and the remaining tower works fine and there is no packet loss 
to the AP but when we turn both sites back on the packet loss returns.  
There is also a Netonix switch at the tower that has the 5.7 Nanobridge 
acting as the AP and it's cable diagnostics tool shows a problem on pins 
5, 6, 7 and 8 though the AP is powered up. Both these sites are slated 
for upgrades to Ubiquiti AC gear but the logistics will make it 
difficult this week.

Re: [AFMUG] Odd Nanobridge problem

[Timothy Steele]

Sounds like ether you got water in the cable during the storm or ESD hit
the Ethernet port and you only are seeing errors due to packet loss will
only show up if you try and pass more then 10Mbps

On Thu, Mar 2, 2017, 9:22 AM Jay Weekley  wrote:

> We have a 5.7 Nanobridge acting as an AP that serves two tower sites
> that are close together.  After a storm yesterday we started getting a
> lot of packet loss when pinging the AP.   We can disconnect either of
> the SMs and the remaining tower works fine and there is no packet loss
> to the AP but when we turn both sites back on the packet loss returns.
> There is also a Netonix switch at the tower that has the 5.7 Nanobridge
> acting as the AP and it's cable diagnostics tool shows a problem on pins
> 5, 6, 7 and 8 though the AP is powered up. Both these sites are slated
> for upgrades to Ubiquiti AC gear but the logistics will make it
> difficult this week.
>

Re: [AFMUG] Odd Nanobridge problem

[Jay Weekley]

That was one of my ideas but I imagine either side would pull more than 
10Mbps on it's own.


Timothy Steele wrote:


Sounds like ether you got water in the cable during the storm or ESD 
hit the Ethernet port and you only are seeing errors due to packet 
loss will only show up if you try and pass more then 10Mbps



On Thu, Mar 2, 2017, 9:22 AM Jay Weekley > wrote:


We have a 5.7 Nanobridge acting as an AP that serves two tower sites
that are close together.  After a storm yesterday we started getting a
lot of packet loss when pinging the AP.   We can disconnect either of
the SMs and the remaining tower works fine and there is no packet loss
to the AP but when we turn both sites back on the packet loss returns.
There is also a Netonix switch at the tower that has the 5.7
Nanobridge
acting as the AP and it's cable diagnostics tool shows a problem
on pins
5, 6, 7 and 8 though the AP is powered up. Both these sites are slated
for upgrades to Ubiquiti AC gear but the logistics will make it
difficult this week.

No virus found in this message.
Checked by AVG - www.avg.com 
Version: 2016.0.7998 / Virus Database: 4756/14047 - Release Date: 03/02/17