Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
We usually put in DIN rail and mount it to the DIN rail. Regards, Chuck On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart wrote: > Whats the best to mount RB2011iL-IN into this enclosure? > > Tim > >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
I just did heavy duty velcro to the inside of the door, but I had a LOT of DIN stuff on the right and a smaller box. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg wrote: > We usually put in DIN rail and mount it to the DIN rail. > > Regards, > Chuck > > On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart wrote: > >> Whats the best to mount RB2011iL-IN into this enclosure? >> >> Tim >> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
I have in the past drilled and tapped holes in the backplane and then installed screws into the top of the panel with double nuts on the underside. The screws of course line up with the keyholes on the RB2011. It's more space efficient to mount it sideways though. For that I've taken the cover off and attached a DIN bracket to the rear surface of the cover, then it can snap onto a DIN rail. Whats the best to mount RB2011iL-IN into this enclosure? Tim
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
Do you guys have an picture of this setup by any chance? Tim -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett Sent: Friday, March 20, 2015 1:44 PM To: af@afmug.com Subject: Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure I have in the past drilled and tapped holes in the backplane and then installed screws into the top of the panel with double nuts on the underside. The screws of course line up with the keyholes on the RB2011. It's more space efficient to mount it sideways though. For that I've taken the cover off and attached a DIN bracket to the rear surface of the cover, then it can snap onto a DIN rail. > Whats the best to mount RB2011iL-IN into this enclosure? > > Tim >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
I do Velcro a lot too for the Routerboards. Been working great for 8+ years. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman wrote: > I just did heavy duty velcro to the inside of the door, but I had a LOT of > DIN stuff on the right and a smaller box. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg wrote: > >> We usually put in DIN rail and mount it to the DIN rail. >> >> Regards, >> Chuck >> >> On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart wrote: >> >>> Whats the best to mount RB2011iL-IN into this enclosure? >>> >>> Tim >>> >>> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
#justOhioThings Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser wrote: > I do Velcro a lot too for the Routerboards. Been working great for 8+ > years. > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman > wrote: > >> I just did heavy duty velcro to the inside of the door, but I had a LOT >> of DIN stuff on the right and a smaller box. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg wrote: >> >>> We usually put in DIN rail and mount it to the DIN rail. >>> >>> Regards, >>> Chuck >>> >>> On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart wrote: >>> Whats the best to mount RB2011iL-IN into this enclosure? Tim >>> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
lol Josh, I actually picked up that Velcro technique from JonnyO in Alabama 10 years ago! Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Mar 20, 2015 at 2:00 PM, Josh Luthman wrote: > #justOhioThings > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser > wrote: > >> I do Velcro a lot too for the Routerboards. Been working great for 8+ >> years. >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> I just did heavy duty velcro to the inside of the door, but I had a LOT >>> of DIN stuff on the right and a smaller box. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg wrote: >>> We usually put in DIN rail and mount it to the DIN rail. Regards, Chuck On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart wrote: > Whats the best to mount RB2011iL-IN into this enclosure? > > Tim > > >>> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
Are you using the 3M super duty stuff? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 2:12 PM, Kurt Fankhauser wrote: > lol Josh, I actually picked up that Velcro technique from JonnyO in > Alabama 10 years ago! > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Mar 20, 2015 at 2:00 PM, Josh Luthman > wrote: > >> #justOhioThings >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser >> wrote: >> >>> I do Velcro a lot too for the Routerboards. Been working great for 8+ >>> years. >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> I just did heavy duty velcro to the inside of the door, but I had a LOT of DIN stuff on the right and a smaller box. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg wrote: > We usually put in DIN rail and mount it to the DIN rail. > > Regards, > Chuck > > On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart > wrote: > >> Whats the best to mount RB2011iL-IN into this enclosure? >> >> Tim >> >> > >>> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
using the walmart "Velcro" brand, says its industrial adhesive Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Mar 20, 2015 at 2:20 PM, Josh Luthman wrote: > Are you using the 3M super duty stuff? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 2:12 PM, Kurt Fankhauser > wrote: > >> lol Josh, I actually picked up that Velcro technique from JonnyO in >> Alabama 10 years ago! >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> On Fri, Mar 20, 2015 at 2:00 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> #justOhioThings >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser >>> wrote: >>> I do Velcro a lot too for the Routerboards. Been working great for 8+ years. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman < j...@imaginenetworksllc.com> wrote: > I just did heavy duty velcro to the inside of the door, but I had a > LOT of DIN stuff on the right and a smaller box. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg > wrote: > >> We usually put in DIN rail and mount it to the DIN rail. >> >> Regards, >> Chuck >> >> On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart >> wrote: >> >>> Whats the best to mount RB2011iL-IN into this enclosure? >>> >>> Tim >>> >>> >> > >>> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
I've tried that stuff here and there. Sometimes it works, sometimes it falls apart (the adhesive, not the finger/loop). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 2:25 PM, Kurt Fankhauser wrote: > using the walmart "Velcro" brand, says its industrial adhesive > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Mar 20, 2015 at 2:20 PM, Josh Luthman > wrote: > >> Are you using the 3M super duty stuff? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Mar 20, 2015 at 2:12 PM, Kurt Fankhauser >> wrote: >> >>> lol Josh, I actually picked up that Velcro technique from JonnyO in >>> Alabama 10 years ago! >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Fri, Mar 20, 2015 at 2:00 PM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> #justOhioThings Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser wrote: > I do Velcro a lot too for the Routerboards. Been working great for 8+ > years. > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman < > j...@imaginenetworksllc.com> wrote: > >> I just did heavy duty velcro to the inside of the door, but I had a >> LOT of DIN stuff on the right and a smaller box. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg >> wrote: >> >>> We usually put in DIN rail and mount it to the DIN rail. >>> >>> Regards, >>> Chuck >>> >>> On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart >>> wrote: >>> Whats the best to mount RB2011iL-IN into this enclosure? Tim >>> >> > >>> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
Scotch extreme double sided tape from home depot is some incredible stuff. One square inch will hold like 200lbs On Mar 20, 2015 11:26 AM, "Josh Luthman" wrote: > I've tried that stuff here and there. Sometimes it works, sometimes it > falls apart (the adhesive, not the finger/loop). > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 2:25 PM, Kurt Fankhauser > wrote: > >> using the walmart "Velcro" brand, says its industrial adhesive >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> On Fri, Mar 20, 2015 at 2:20 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> Are you using the 3M super duty stuff? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Mar 20, 2015 at 2:12 PM, Kurt Fankhauser >>> wrote: >>> lol Josh, I actually picked up that Velcro technique from JonnyO in Alabama 10 years ago! Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Mar 20, 2015 at 2:00 PM, Josh Luthman < j...@imaginenetworksllc.com> wrote: > #justOhioThings > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser > wrote: > >> I do Velcro a lot too for the Routerboards. Been working great for 8+ >> years. >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> I just did heavy duty velcro to the inside of the door, but I had a >>> LOT of DIN stuff on the right and a smaller box. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg >>> wrote: >>> We usually put in DIN rail and mount it to the DIN rail. Regards, Chuck On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart wrote: > Whats the best to mount RB2011iL-IN into this enclosure? > > Tim > > >>> >> > >>> >> >
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
How do you replace things then?! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 20, 2015 2:29 PM, "TJ Trout" wrote: > Scotch extreme double sided tape from home depot is some incredible stuff. > One square inch will hold like 200lbs > On Mar 20, 2015 11:26 AM, "Josh Luthman" > wrote: > >> I've tried that stuff here and there. Sometimes it works, sometimes it >> falls apart (the adhesive, not the finger/loop). >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Mar 20, 2015 at 2:25 PM, Kurt Fankhauser >> wrote: >> >>> using the walmart "Velcro" brand, says its industrial adhesive >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Fri, Mar 20, 2015 at 2:20 PM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> Are you using the 3M super duty stuff? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 2:12 PM, Kurt Fankhauser wrote: > lol Josh, I actually picked up that Velcro technique from JonnyO in > Alabama 10 years ago! > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Mar 20, 2015 at 2:00 PM, Josh Luthman < > j...@imaginenetworksllc.com> wrote: > >> #justOhioThings >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser >> wrote: >> >>> I do Velcro a lot too for the Routerboards. Been working great for >>> 8+ years. >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> I just did heavy duty velcro to the inside of the door, but I had a LOT of DIN stuff on the right and a smaller box. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg wrote: > We usually put in DIN rail and mount it to the DIN rail. > > Regards, > Chuck > > On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart > wrote: > >> Whats the best to mount RB2011iL-IN into this enclosure? >> >> Tim >> >> > >>> >> > >>> >>
Re: [AFMUG] whats the best way to mount RB2011iL-IN into this enclosure
Use 300lbs? On Fri, Mar 20, 2015 at 2:49 PM, Josh Luthman wrote: > How do you replace things then?! > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Mar 20, 2015 2:29 PM, "TJ Trout" wrote: >> >> Scotch extreme double sided tape from home depot is some incredible stuff. >> One square inch will hold like 200lbs >> >> On Mar 20, 2015 11:26 AM, "Josh Luthman" >> wrote: >>> >>> I've tried that stuff here and there. Sometimes it works, sometimes it >>> falls apart (the adhesive, not the finger/loop). >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Mar 20, 2015 at 2:25 PM, Kurt Fankhauser >>> wrote: using the walmart "Velcro" brand, says its industrial adhesive Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Mar 20, 2015 at 2:20 PM, Josh Luthman wrote: > > Are you using the 3M super duty stuff? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 2:12 PM, Kurt Fankhauser > wrote: >> >> lol Josh, I actually picked up that Velcro technique from JonnyO in >> Alabama 10 years ago! >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> >> On Fri, Mar 20, 2015 at 2:00 PM, Josh Luthman >> wrote: >>> >>> #justOhioThings >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Mar 20, 2015 at 1:57 PM, Kurt Fankhauser >>> wrote: I do Velcro a lot too for the Routerboards. Been working great for 8+ years. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Mar 20, 2015 at 1:43 PM, Josh Luthman wrote: > > I just did heavy duty velcro to the inside of the door, but I had a > LOT of DIN stuff on the right and a smaller box. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Mar 20, 2015 at 1:41 PM, Chuck Hogg > wrote: >> >> We usually put in DIN rail and mount it to the DIN rail. >> >> Regards, >> Chuck >> >> On Fri, Mar 20, 2015 at 1:40 PM, Tim Reichhart >> wrote: >>> >>> Whats the best to mount RB2011iL-IN into this enclosure? >>> >>> Tim >>> >> > >>> >> > >>> >
