[sc-issues] [Issue 100355] Cut / Paste Special shift cells defective
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100355 User rivdsl changed the following: What|Old value |New value Version|OOo 3.1 |OOo 3.2 --- Additional comments from riv...@openoffice.org Sun Feb 28 09:50:15 + 2010 --- Confirmed in 3.2 Regarding your question. Where I previously stated that it is correct behavior I should have stated that it I believe it to be an unimplemented feature. I suspect that such a feature would require some special rules when it comes to updating of references in formulas. Somewhere it was apparently decided to disable the feature, but I simply see no reason why it should be disabled when special pasting cut cells on a different sheet. Obviously implementing the feature would be the preferred solution to this problem, since it can be quite frustrating when pasting a range that does not even contain formulas (and hence there should be no doubt about the expected behavior). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 29941] ability to resize single c olumn with mouse
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=29941 User rivdsl changed the following: What|Old value |New value CC|''|'rivdsl' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 29941] ability to resize single c olumn with mouse
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=29941 --- Additional comments from riv...@openoffice.org Mon Aug 24 21:57:38 + 2009 --- Tested with 3.1.0, behavior has not changed. Using the ctrl modifier columns to the right are shrinked proportionally. Using the shift modifier some columns to the right of the resized column shrink to minimum size (defect?). Personally I believe this would be a good enhancement. It can be very annoying that when you widthen a column because something does not fit, other columns shrink, causing their contents to not fit. Requiring the user to resize the other columns as well. There are two ways of resizing columns with the keyboard, the first one is with the alt key, which resizes the table to the right, the second one with shift+alt resizing the table to the left. I suggest implementing the same keyboard modifiers for resizing with the mouse. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 100355] Cut / Paste Special shift cells defective
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100355 User rivdsl changed the following: What|Old value |New value Version|OOo 3.0.1 |OOo 3.1 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 100355] Cut / Paste Special shift cells defective
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100355 Issue #|100355 Summary|Cut / Paste Special shift cells defective Component|Spreadsheet Version|OOo 3.0.1 Platform|PC URL| OS/Version|Windows XP Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|editing Assigned to|spreadsheet Reported by|rivdsl --- Additional comments from riv...@openoffice.org Thu Mar 19 10:27:47 + 2009 --- When the paste special dialog is opened after cutting cells, the special paste dialog disables the shift cells down option if the paste area overlaps columns with the cut area. The same holds for the shift cells right options if it overlaps rows. This is correct behavior, however it is not checked if the overlapping rows/columns are on the same sheet. Steps to reproduce: 1) Create a new spreadsheet 2) Cut cell B2 3) Paste special at cell B1, shift cells down is disabled as expected. 4) Close the dialog 5) Paste special at cell A2, shift cells right is disabled as expected. 6) Close the dialog 7) Paste special at cell A1, all shift options are enabled as expected. 8) Close the dialog 9) Go to the Sheet2 10) Paste special at cell B1, shift down is disabled, this is not expected because it is a different sheet. 11) Close the dialog 12) Paste special at cell A2, shift right is disabled, this is not expected because it is a different sheet. 13) Close the dialog - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 98483] After reopening connector jumps back to default location
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=98483 Issue #|98483 Summary|After reopening connector jumps back to default locati |on Component|Drawing Version|OOO300m9 Platform|PC URL| OS/Version|Windows XP Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|editing Assigned to|graphicsneedsconfirm Reported by|rivdsl --- Additional comments from riv...@openoffice.org Mon Jan 26 15:06:16 + 2009 --- Tested with the following configuration: Grid Res 1.27cm subdivision 1, both horizontal and vertical Snap to grid enabled Default formatting in textbox: Arial 18pt 1) Create a new drawing 2) Draw a new textbox with horizontal size 5 grids and vertical size 1 grid. The height gets automatically adjusted to Arial 18 pt, therefore the bottom of the textbox is not at the grid anymore. 3) Type in TestText. 4) Add a gluepoint at the top side, with a spacing of two grids from the left. 5) Do the same at the bottom of the textbox. 6) Create a new connector from the top gluepoint to the bottom gluepoint. The connector is routed along the right side of the textbox. 7) Use the middle gripper of the connector to route it along the left side of the textbox. 8) Save the drawing, close it, and reopen. The connector is loaded at the customized location, however after a short time it suddenly jumps back to the default location. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 98483] After reopening connector jumps back to default location
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=98483 --- Additional comments from riv...@openoffice.org Mon Jan 26 15:07:45 + 2009 --- Created an attachment (id=59667) Example file demonstrating the issue - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 98483] After reopening connector jumps back to default location
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=98483 --- Additional comments from riv...@openoffice.org Mon Jan 26 15:11:01 + 2009 --- Noticed after uploading the attachment that the defect does not occur when the file is opened as read-only. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
