Re: [Alsa-user] SB Audigy 2 Value
Gene Heskett wrote: I've been staring at this till its all a blur. And for the time being, the old sblive is going back in in a few seconds. But any help will be gladly appreciated. Please decribe the problem you are having. You just dump loads of config, without describing your problem. Although looking at the config, I would delete the .asoundrc file. You should not need .asoundrc files any more, except it specific, rarely used configurations. James --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] Intel High Definition Audio. Front Audio Header Configuration?
Hello Everyone, I am using Intel D915GLVG motherboard with onboard Intel HD Audio. Here is the relevant lspci -vv output. # lspci -vv 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Intel Corporation Unknown device e213 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- Latency: 0, Cache Line Size 10 Interrupt: pin A routed to IRQ 17 Region 0: Memory at ffac (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: Data: Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s 64ns, L1 1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s 64ns, L1 1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) I have sound working without any problems but today, I connected front audio ports of my chassis to the motherboard. Now I am facing problems. Problem: The front microphone jack doesn't work and when I connect headphones to the line out jack the rear audio jack doesn't get muted. Expected: Front microphone should work and when the headphones are connected to front audio jack the rear audio jack should not produce sound. I have tried to pass model=* option with following models but none of them work. 3stack 3stack-digout 5stack 5stack-digout 6stack 6stack-digout w810 z71v asus uniwill F1734 What do I need to do to get the expected behaviour? Any help will be highly appreciated. TIA, Regards, Abhay pgptsE8Q7sXuf.pgp Description: PGP signature
[Alsa-user] break of installation
Hello alsa-utils-1.0.9a 'make install' make[1]: Leaving directory `/root/alsa-utils-1.0.9a/alsactl' Making install in alsaconf make[1]: Entering directory `/root/alsa-utils-1.0.9a/alsaconf' Making install in po make[2]: Entering directory `/root/alsa-utils-1.0.9a/alsaconf/po' mv: cannot stat `t-ja.gmo': No such file or directory make[2]: *** [ja.gmo] Error 1 make[2]: Leaving directory `/root/alsa-utils-1.0.9a/alsaconf/po' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/root/alsa-utils-1.0.9a/alsaconf' make: *** [install-recursive] Error 1 How can I go on? Michael Adam --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] break of installation
On Wed, 2006-01-11 at 19:04 +0100, [EMAIL PROTECTED] wrote: Hello alsa-utils-1.0.9a 'make install' make[1]: Leaving directory `/root/alsa-utils-1.0.9a/alsactl' Making install in alsaconf make[1]: Entering directory `/root/alsa-utils-1.0.9a/alsaconf' Making install in po make[2]: Entering directory `/root/alsa-utils-1.0.9a/alsaconf/po' mv: cannot stat `t-ja.gmo': No such file or directory make[2]: *** [ja.gmo] Error 1 make[2]: Leaving directory `/root/alsa-utils-1.0.9a/alsaconf/po' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/root/alsa-utils-1.0.9a/alsaconf' make: *** [install-recursive] Error 1 How can I go on? Why would you install such an old version? Try 1.0.10 at least. Lee --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] AC3 Passthru on YMF744 (fortissimo)
I have not been able to successfully get AC3 passthru to work on this card, Yamaha YMF744 driver, I cant find out directly if its simply not supported or if Im doing something wrong, I can get PCM sound out the optical port without issue. No matter what I try, AC3 Will not pass thru. Alsa 1.0.11-rc2 Kernel 2.6.15 Thanks! --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] AC3 Passthru on YMF744 (fortissimo)
On Wed, 2006-01-11 at 14:30 -0500, Dave wrote: I have not been able to successfully get AC3 passthru to work on this card, Yamaha YMF744 driver, I cant find out directly if its simply not supported or if Im doing something wrong, I can get PCM sound out the optical port without issue. No matter what I try, AC3 Will not pass thru. Alsa 1.0.11-rc2 Kernel 2.6.15 It certainly looks like it should work... this is the ymfpci driver right? If you run iecset audio off first does it work? Lee --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] AC3 Passthru on YMF744 (fortissimo)
I wasnt aware of the iecset utility, but I still wasnt able to have any luck # iecset -c 1 Mode: consumer Data: non-audio Rate: 44100 Hz Copyright: protected Emphasis: none Category: PCM coder Original: original Clock: 1000 ppm Both the audio and non-audio settings produced the same results, a loud static noise. the thing that worried me was the rate =44100, I run the command iecset -c 1 rate 48000 but it never sticks to that rate. my sp/dif receiver never goes into ac3 mode. stays in PCM mode which works fine with non -ac3 content Lee Revell wrote: On Wed, 2006-01-11 at 14:30 -0500, Dave wrote: I have not been able to successfully get AC3 passthru to work on this card, Yamaha YMF744 driver, I cant find out directly if its simply not supported or if Im doing something wrong, I can get PCM sound out the optical port without issue. No matter what I try, AC3 Will not pass thru. Alsa 1.0.11-rc2 Kernel 2.6.15 It certainly looks like it should work... this is the ymfpci driver right? If you run iecset audio off first does it work? Lee --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] Dolby Digital Live?
I have a Bluegears Mystique 7.1 DDL card which, as the name implies, does dobly digital live. How do I enable that in linux? I know how to do s/pdif passthrough, but I prefer the card to do the encoding. The card is cmedia based: [EMAIL PROTECTED] ~]# aplay --list-devices List of PLAYBACK Hardware Devices card 0: CMI8738MC8 [C-Media PCI CMI8738-MC8], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CMI8738MC8 [C-Media PCI CMI8738-MC8], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CMI8738MC8 [C-Media PCI CMI8738-MC8], device 2: CMI8738-MC8 [C-Media PCI IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_idv37alloc_id865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Dolby Digital Live?
On Wed, 2006-01-11 at 23:52 -0500, hondaman wrote: I have a Bluegears Mystique 7.1 DDL card which, as the name implies, does dobly digital live. How do I enable that in linux? I know how to do s/pdif passthrough, but I prefer the card to do the encoding. The card is cmedia based: These cards that claim to have a hardware AC3 or DTS or whatever encoder do not really have one. It is implemented in software by the Windows driver. Lee --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Dolby Digital Live?
On Wed, 2006-01-11 at 23:52 -0500, hondaman wrote: Bluegears Mystique 7.1 DDL It's impossible to tell from the site whether the encoding is done by the hardware or the Windows driver. Either way, the ALSA driver does not support it, and we don't have the hardware specs that would be needed. You could ask the vendor about Linux support. Lee --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user