RE: Another Amanda + Win32 backup problem
Sorry that was just a typo, they do have 2 slashes in amandapass -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]Sent: Tuesday, 30 September 2003 4:54 PMTo: Jason TedescoCc: [EMAIL PROTECTED]; [EMAIL PROTECTED]Subject: Re: Another Amanda + Win32 backup problemYour entries in amandapass should also have 2 slashes -> //mymachine/temp username%passwordHTHBert De RidderPeopleWare NV - Head OfficeCdt.Weynsstraat 85 B-2660 Hoboken Tel: +32 3 448.33.38 Fax: +32 3 448.32.66 PeopleWare NV - Branch Office GeelKleinhoefstraat 5B-2440 GeelTel: +32 14 57.00.90Fax: +32 14 58.13.25http://www.peopleware.be "Jason Tedesco" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 30/09/2003 08:45 To <[EMAIL PROTECTED]> cc Subject Another Amanda + Win32 backup problem I am trying to backup a win32 host with Amanda and keep running into problems. I compiled Amanda with smbclient full path.When I try executing an amcheck I receive the following error.Amanda Backup Client Hosts CheckWARNING: mymachine.host.org: selfcheck request timed out. Host down?Client check: 1 host checked in 30.019 seconds, 1 problem found(brought to you by Amanda 2.4.4p1)I also receive this error in my logfile.ERROR planner Request to mymachine.host.org timed out.I increased the etimeout in amanda.conf although that did not change a thing.I can use smbclient to mount my drive without a problem, and the directory shard on the win32 host has no permissions set.This is what I have below in my disklistmymachine.host.org //mymachine/temp comp-root-tarI also have a username and password set out in /etc/amandapass and /usr/local/etc/amandapass . The reason why I have amandapass in two directories is because I am unsure which one will be used by amanda on a solaris 8 box./mymachine/temp username%passwordAny advice would be appreciated.Regards, Jason
Re: Another Amanda + Win32 backup problem
Your entries in amandapass should also have 2 slashes -> //mymachine/temp username%password HTH Bert De Ridder PeopleWare NV - Head Office Cdt.Weynsstraat 85 B-2660 Hoboken Tel: +32 3 448.33.38 Fax: +32 3 448.32.66 PeopleWare NV - Branch Office Geel Kleinhoefstraat 5 B-2440 Geel Tel: +32 14 57.00.90 Fax: +32 14 58.13.25 http://www.peopleware.be "Jason Tedesco" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 30/09/2003 08:45 To <[EMAIL PROTECTED]> cc Subject Another Amanda + Win32 backup problem I am trying to backup a win32 host with Amanda and keep running into problems. I compiled Amanda with smbclient full path. When I try executing an amcheck I receive the following error. Amanda Backup Client Hosts Check WARNING: mymachine.host.org: selfcheck request timed out. Host down? Client check: 1 host checked in 30.019 seconds, 1 problem found (brought to you by Amanda 2.4.4p1) I also receive this error in my logfile. ERROR planner Request to mymachine.host.org timed out. I increased the etimeout in amanda.conf although that did not change a thing. I can use smbclient to mount my drive without a problem, and the directory shard on the win32 host has no permissions set. This is what I have below in my disklist mymachine.host.org //mymachine/temp comp-root-tar I also have a username and password set out in /etc/amandapass and /usr/local/etc/amandapass . The reason why I have amandapass in two directories is because I am unsure which one will be used by amanda on a solaris 8 box. /mymachine/temp username%password Any advice would be appreciated. Regards, Jason
Another Amanda + Win32 backup problem
I am trying to backup a win32 host with Amanda and keep running into problems. I compiled Amanda with smbclient full path. When I try executing an amcheck I receive the following error. Amanda Backup Client Hosts Check WARNING: mymachine.host.org: selfcheck request timed out. Host down? Client check: 1 host checked in 30.019 seconds, 1 problem found (brought to you by Amanda 2.4.4p1) I also receive this error in my logfile. ERROR planner Request to mymachine.host.org timed out. I increased the etimeout in amanda.conf although that did not change a thing. I can use smbclient to mount my drive without a problem, and the directory shard on the win32 host has no permissions set. This is what I have below in my disklist mymachine.host.org //mymachine/temp comp-root-tar I also have a username and password set out in /etc/amandapass and /usr/local/etc/amandapass . The reason why I have amandapass in two directories is because I am unsure which one will be used by amanda on a solaris 8 box. /mymachine/temp username%password Any advice would be appreciated. Regards, Jason
Bilgisayarcýnýza Taþýnmayýn!
Ben aramıyorum onlar beni arıyor... BİLGİSAYARCINIZA TAŞINMAYIN ! TechnoTime Erişim Programı ile Telefon hattınızın Bilgisayar TEKNİK SERVİS alabileceğini biliyormusunuz? Formu Doldurmak için tıklayınız TimeNET Intel Celeron 1.8 GHz işlemci, 128MB DDR 333Mhz RAM, 30GB 7200RPM HDD, 52X CD-Rom Sürücü, 1.44 Disket Sürücü, 32 MB TNT2 onc ekran kartı, Onboard Ses Entegresi, 500Watt Jaguar ses düzeni, 56 K V.92 fax - modem, Tower Kasa, Q Klavye+ Mouse, 17’ 1280X1024 Monitör, 1 yıl Sistem garantisi, 1 Aylık Sınırsız Internet Paket 439 + KDV TimeMAX Intel Pentium IV 2.4GHz işlemiçi, 256MB DDR 333Mhz RAM, 60GB 7200RPM HDD, 16*52X24X52 DVD OEM-LG COMBO Sürücü, 1.44 Disket Sürücü, 64MB GeForce4 MX440 ekran Kartı, Onboard Ses Entegresi, 500Watt Jaguar ses düzeni, 56 K V.92 fax - modem, Tower Kasa, Q Klavye+ Mouse, 17’ 1280X1024 Monitör, 1 yıl Sistem garantisi, 1 Aylık Sınırsız Internet Paket 719 + KDV TimeOKUL Intel Celeron 2.0 GHz işlemci, 128MB DDR 333Mhz RAM, 30GB 7200RPM HDD, 52X CD-Rom Sürücü, 1.44 Disket Sürücü, 64 MB GeForce2 MX400 ekran kartı, Onboard Ses Entegresi, 500Watt Jaguar ses düzeni, 56 K V.92 fax - modem, Tower Kasa, Q Klavye+ Mouse, 17’ 1280X1024 Monitör 1 yıl Sistem garantisi, 1 Aylık Sınırsız Internet Paket 499 + KDV TimeOYUN Intel Pentium IV 2.6GHz işlemci, 256MB DDR 333Mhz RAM, 60GB 7200RPM HDD, 16*52X24X52 DVD OEM-LG COMBO Sürücü, 1.44 Disket Sürücü, 128MB GeForce4 MX440 Ekr.Kartı, Onboard Ses Entegresi, 1000Watt Jaguar ses düzeni, 56 K V.92 fax - modem, Tower Kasa, Q Klavye+ Mouse, 17’ LG 700S 1280X1024 Monitör, 1 yıl Sistem garantisi, 1 Aylık Sınırsız Internet Paket 799 + KDV TimeİŞ Intel Celeron 2.4 GHz işlemci, 256MB DDR 333Mhz RAM, 40GB 7200RPM HDD, 52X CD-Rom Sürücü, 1.44 Disket Sürücü, 128 MB GeForce2 MX400 ekran kartı, Onboard Ses Entegresi, 500Watt Jaguar ses düzeni, 56 K V.92 fax - modem, Tower Kasa, Q Klavye+ Mouse, 17’ 1280X1024 Monitör, 1 yıl Sistem garantisi, 1 Aylık Sınırsız Internet Paket 529 + KDV TimeFULL Intel Pentium IV 2.8GHz işlemci, 512MB DDR 333Mhz RAM, 80GB 7200RPM HDD, 16*52X24X52 DVD OEM-LG COMBO Sürücü, 1.44 Disket Sürücü, 128MB GeForce4 MX440 Ekr.Kartı, Onboard Ses Entegresi, 1000Watt Jaguar ses düzeni, 56 K V.92 fax - modem, Tower Kasa, Q Klavye+ Mouse, 17’ Philips107T 1280X1024 Monitör, 1 yıl Sistem garantisi, 1 Aylık Sınırsız Internet Paket 949 + KDV Elektronik ve Otomasyon San.Tic.Ltd.Şti. Ali Nihat Tarlan Cad. Akasya Sok. Demir Apt. No:8/1 Bostancı İSTANBUL Telefon : 0 216 464 76 76 - 445 62 75 - 361 39 24 Fax : 0 216 361 39 24
split dump
Hello All, I want backup a big partitions, smth about 3 Gb from remote hosts, but amanda server had lost connection with amanda-clients. Is it possible split archive, sended from client into little parts, for example by 100 Mb, or increase connection reliability? -- Best regards, Artyom mailto:[EMAIL PROTECTED]
DONATION FOR THE LORD.
From: Mrs Serena Jones PLEASE ENDEAVOUR TO USED IT FOR THE CHILDREN OF GOD. I am the above named person from Kuwait. I am married to Dr. Harry Jones who worked with Kuwait embassy in Ivory Co ast for nine years before he died in the year 2000. We were married for eleven years without a child. He died a fter a brief illness that lasted for only four days. Before his death we were both born again Christia ns.Since his death I decided not to re- marry or get a child outside my matrimonial home which the Bi ble is against.When my late husband was alive he deposited the sum of$8.6Million (Eight Million six hundred thousand U.S. D ollars) with one finance/security company in Amsterderm Hollan d. Presently, this money is still with the Security Company. Recently, my Doctor told me that I would not last for the next three months due to cancer problem. Though what disturbs me most i s my stroke sickness. Having known my condition I decided to donate this fund to church or better still a christian individ ual that will utilize this money the way I am going to instruc t here in. I want a church that will use this fund to fund chu rches, orphanages and widows propagating the word of God and t o ensure that the house of God is maintained. The Bible made us to understand that Blessed is the hand that giveth. I took this decision because I don?t have any child that wil l inherit this money and my husband relatives are not Christi ans and I don?t want my husband?s hard earned money to be misu sed by unbelievers. I don?t want a situation where this money will be used in an ungodly manner. Hence the reason for taking this bold decision. I am not afraid of death hence I know whe re I am going. I know that I am going to be in the bosom of th e Lord. Exodus 14 VS 14 says that the lord will fight my case and I shall hold my peace. I don?t need any telephone communi cation in this regard because of my health because of the pres ence of my husband?s relatives around me always. I don?t want them to know about this development. With God all things are p ossible. As soon as I receive your reply I shall give you the contact of the Finance/Security Company in Amsterderm Holland . I will also issue you a letter of authority that will prove you as the original- beneficiary of this fund. I want you and the church to always pray for me because the lord is my shephard. My happiness is that I lived a life of a worthy Christian. Whoe ver that wants to serve the Lord must serve him in spirit and truth. Please always be prayerful all through your life. Any d elay in your reply will give me room in sourcing for a chuch or christian individual for this same purpose. Please assure me that you will act accordingly as I stated herein. Hoping to hearing from you. N.B- PLEASE I WILL ADVICE YOU TO GIVE THE LAWYER IN CHARGE A CALL I N HOLLAND IMMEDIATELY, HE DOES EVERYTHING ON MY BEHALF AND HE' S VERY UNDERSTANDING AND I BELIEVE HE WILL LEAD YOU TO YOUR SU CCESS IN JESUS NAME, THE LAWYER'S NUMBER IS 00-31-645-246-626. Remain blessed in the name of the Lord. Yours in Christ, Mrs Serena Jones
Snapshot vs. -p1 (was Re: Lot's of I/O errors)
On Mon, Jul 14, 2003 at 11:07:10AM +0200, Toralf Lund wrote: > I've been getting a lot of > > *** A TAPE ERROR OCCURRED: [[writing file: I/O error]]. On Mon, Jul 14, 2003 at 01:44:26PM +0200, Toralf Lund wrote: > Note that I've now gone back to amanda-2.4.4, and successfully flushed > some images that caused trouble in the past. I think an important question > here is whether something related to the holding disk handling or taping > of images has changed since 2.4.4. Did you ever learn anything more about this? I'd like to upgrade from 2.4.4 to -p1 or the latest snapshot, but I'd appreciate your thoughts first -- and those of anyone else who cares to speak up. Thanks much. -- | | /\ |-_|/ > Eric Siegerman, Toronto, Ont.[EMAIL PROTECTED] | | / When I came back around from the dark side, there in front of me would be the landing area where the crew was, and the Earth, all in the view of my window. I couldn't help but think that there in front of me was all of humanity, except me. - Michael Collins, Apollo 11 Command Module Pilot
Re: problems dumping certain filesystems
Eric Siegerman wrote: I believe there is a dumper->taper connection, for direct-to-tape dumps. That's how I read docs/PORT.USAGE, anyway -- see the bits on stream_server() and stream_client(). But both of those Aha, yes, indeed. That's correct. processes run on the same host, so it's still hard to see how a firewall could get between them. Unless Amanda's running on the firewall machine itself -- which I'd consider an unsafe idea anyway! As many linux distributions ship with a firewall installed and configured (just as MS Windows with a personal firewall) it could indeed block traffic to its own sockets, when slightly misconfigured, or with paranoid settings.
Re: problems dumping certain filesystems
On Mon, Sep 29, 2003 at 12:06:48PM +0200, Paul Bijnens wrote: > Marc Cuypers wrote: > > Found the problem. The firewall blocked communication between taper and > > dumper. > > That's strange, because there is no immediate communication between > these two, as far as I know. > > Driver is connected with a pipe to each dumper and to taper-reader. I believe there is a dumper->taper connection, for direct-to-tape dumps. That's how I read docs/PORT.USAGE, anyway -- see the bits on stream_server() and stream_client(). But both of those processes run on the same host, so it's still hard to see how a firewall could get between them. Unless Amanda's running on the firewall machine itself -- which I'd consider an unsafe idea anyway! > Strange is also that some partitions on that host got backed up, while > others did not. It looks as though the ones that succeeded all dumped via holding disk, so in those cases there was indeed no need for dumpers and taper to talk directly. > there was no error msg whatsoever in the mail report, except that it > simply failed). Yeah, that was the part that got my attention too! But then, it's 2.4.2, so maybe that bug's been fixed. -- | | /\ |-_|/ > Eric Siegerman, Toronto, Ont.[EMAIL PROTECTED] | | / When I came back around from the dark side, there in front of me would be the landing area where the crew was, and the Earth, all in the view of my window. I couldn't help but think that there in front of me was all of humanity, except me. - Michael Collins, Apollo 11 Command Module Pilot
FAIL taper ( help me )
Hello, The time of backup was very fast and the log show FAIL TAPER. I'd like know what is happen? My driver went to be fixed a one week ago and I think that it have problems yet but I want be sure. I have 500mb of swap disk and I think it was very slow. The amdump is using all the space of swap disk. Do you think I need more space of swap disk? log.20030929: DISK planner server.cadservice.com.br /home/ntcad/software START planner date 20030929 INFO planner Adding new disk server.cadservice.com.br:/home/ntcad/software. START driver date 20030929 FINISH planner date 20030929 STATS driver startup time 2.244 START taper datestamp 20030929 label backup01 tape 0 INFO taper tape backup01 kb 168064 fm 1 writing file: Input/output error FAIL taper server.cadservice.com.br /home/ntcad/software 20030929 0 [out of tape] ERROR taper no-tape [[writing file: Input/output error]] WARNING driver dumper0 pid 2927 is messed up, ignoring it. FAIL driver server.cadservice.com.br /home/ntcad/software 20030929 0 [dump to tape failed] WARNING driver dumper0 exited with signal 9 FINISH driver date 20030929 time 8812.188 Amdump: amdump: start at Mon Sep 29 09:40:18 BRT 2003 amdump: datestamp 20030929 planner: pid 2923 executable /usr/lib/amanda/planner version 2.4.3 planner: build: VERSION="Amanda-2.4.3" planner: BUILT_DATE="Thu Feb 13 11:14:37 EST 2003" planner: BUILT_MACH="Linux stripples.devel.redhat.com 2.4.20-2.41smp #1 SMP Sun Feb 9 09:47:42 EST 2003 i686 i686 i386 GNU/Linux" planner: CC="gcc" planner: CONFIGURE_COMMAND="'./configure' '--host=i386-redhat-linux' '--build=i386-redhat-linux' '--target=i386-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib/amanda' '--localstatedir=/var/lib' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--enable-shared' '--with-index-server=localhost' '--with-gnutar-listdir=/var/lib/amanda/gnutar-lists' '--with-smbclient=/usr/bin/smbclient' '--with-amandahosts' '--with-user=amanda' '--with-group=disk' '--with-gnutar=/bin/tar'" planner: paths: bindir="/usr/bin" sbindir="/usr/sbin" planner: libexecdir="/usr/lib/amanda" mandir="/usr/share/man" planner: AMANDA_TMPDIR="/tmp/amanda" AMANDA_DBGDIR="/tmp/amanda" planner: CONFIG_DIR="/etc/amanda" DEV_PREFIX="/dev/" planner: RDEV_PREFIX="/dev/r" DUMP="/sbin/dump" planner: RESTORE="/sbin/restore" SAMBA_CLIENT="/usr/bin/smbclient" planner: GNUTAR="/bin/tar" COMPRESS_PATH="/usr/bin/gzip" planner: UNCOMPRESS_PATH="/usr/bin/gzip" MAILER="/usr/bin/Mail" planner: listed_incr_dir="/var/lib/amanda/gnutar-lists" planner: defs: DEFAULT_SERVER="localhost" DEFAULT_CONFIG="DailySet1" planner: DEFAULT_TAPE_SERVER="localhost" planner: DEFAULT_TAPE_DEVICE="/dev/null" HAVE_MMAP HAVE_SYSVSHM planner: LOCKING=POSIX_FCNTL SETPGRP_VOID DEBUG_CODE planner: AMANDA_DEBUG_DAYS=4 BSD_SECURITY USE_AMANDAHOSTS planner: CLIENT_LOGIN="amanda" FORCE_USERID HAVE_GZIP planner: COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast" planner: COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc" planner: time 0.001: dgram_bind: socket bound to 0.0.0.0.925 READING CONF FILES... planner: time 0.013: startup took 0.013 secs SETTING UP FOR ESTIMATES... planner: time 0.013: setting up estimates for server.cadservice.com.br:/home/ntcad/software server.cadservice.com.br:/home/ntcad/software overdue 12325 days for level 0 setup_estimate: server.cadservice.com.br:/home/ntcad/software: command 0, options: last_level -1 next_level0 -12325 level_days 0 getting estimates 0 (0) -1 (-1) -1 (-1) planner: time 0.013: setting up estimates took 0.000 secs GETTING ESTIMATES... driver: pid 2924 executable /usr/lib/amanda/driver version 2.4.3 driver: send-cmd time 0.016 to taper: START-TAPER 20030929 driver: started dumper0 pid 2927 driver: started dumper1 pid 2928 driver: started dumper2 pid 2929 driver: started dumper3 pid 2933 dumper: dgram_bind: socket bound to 0.0.0.0.935 dumper: pid 2933 executable dumper3 version 2.4.3, using port 935 dumper: dgram_bind: socket bound to 0.0.0.0.930 dumper: pid 2928 executable dumper1 version 2.4.3, using port 930 dumper: dgram_bind: socket bound to 0.0.0.0.929 dumper: pid 2927 executable dumper0 version 2.4.3, using por
Re: Amanda and Samba 3.0.0
Hi, Gregor Ibic, on Freitag, 26. September 2003 at 14:57 you wrote to amanda-users: GI> the problem is that smbtar sends some other info at the end, and the size GI> line is not properly parsed in samba. GI> I created patches for Samba 3rc1, rc2 but not for 3.0.0 version. GI> Please, make noise, bother me, to post a patch. Could you post your 3rc?-patches, I would like to have a look and give the 3.0.0-patch a try. Just curious -- best regards, Stefan Stefan G. Weichinger mailto:[EMAIL PROTECTED]
Permission denied error from Amanda client, why?
I am getting an error on one of my client boxes whenever Amanda tries to back it up. Running amcheck returns the following error: Amanda Backup Client Hosts Check ERROR: : [could not access /dev/vx/rdsk/var (/var): Permission denied] ERROR: : [could not access /dev/vx/rdsk/rootvol (/): Permission denied] Client check: 4 hosts checked in 1.147 seconds, 2 problems found I've verified that the Amanda user is a member of the sys group, (the directories are owned by root:sys with rwxr-xr-x permissions). The client is a SunFire280r running Solaris 8 and Veritas 3.5. Another identically configured machine does not have a problem. What else can I check? Thanks JG John W Grover, Systems and Database Administrator Lake Michigan College www.lakemichigancollege.edu
Raylı Dolap Sistemleri
Re: problems dumping certain filesystems
Marc Cuypers wrote: Found the problem. The firewall blocked communication between taper and dumper. That's strange, because there is no immediate communication between these two, as far as I know. Driver is connected with a pipe to each dumper and to taper-reader. There is also a taper-writer, which communicates with a pipe and a shared memory segment with taper-reader. There is no network connection where a firewall could interfere. Unless I'm completely wrong of course. Strange is also that some partitions on that host got backed up, while others did not. Or do you mean there a timeout problem in the firewall between client parts of amanda and the server? I'm glad to be enlightened, it was very strange indeed (also because there was no error msg whatsoever in the mail report, except that it simply failed). -- Paul Bijnens, XplanationTel +32 16 397.511 Technologielaan 21 bus 2, B-3001 Leuven, BELGIUMFax +32 16 397.512 http://www.xplanation.com/ email: [EMAIL PROTECTED] *** * I think I've got the hang of it now: exit, ^D, ^C, ^\, ^Z, ^Q, F6, * * quit, ZZ, :q, :q!, M-Z, ^X^C, logoff, logout, close, bye, /bye, * * stop, end, F3, ~., ^]c, +++ ATH, disconnect, halt, abort, hangup, * * PF4, F20, ^X^X, :D::D, KJOB, F14-f-e, F8-e, kill -1 $$, shutdown, * * kill -9 1, Alt-F4, Ctrl-Alt-Del, AltGr-NumLock, Stop-A, ...* * ... "Are you sure?" ... YES ... Phew ... I'm out * ***
Re: problems dumping certain filesystems
Marc Cuypers wrote: Hi, I'm using amanda 2.4.2 on debian woody. Tapedrive is a HP DDS3 tape. I got the following report from amdump. Anyone who knows what this could be? These dumps were to tape VRIJDAG_01. The next tape Amanda expects to use is: MAANDAG_01. FAILURE AND STRANGE DUMP SUMMARY: ulysses.la /var lev 0 STRANGE ulysses.la /usr lev 0 FAILED [dump to tape failed] ulysses.la /home lev 0 FAILED [dump to tape failed] STATISTICS: Total Full Daily Estimate Time (hrs:min)0:01 Run Time (hrs:min) 0:11 Dump Time (hrs:min)0:01 0:01 0:00 Output Size (meg) 172.2 172.20.0 Original Size (meg) 172.2 172.20.0 Avg Compressed Size (%) -- -- -- Filesystems Dumped3 3 0 Avg Dump Rate (k/s) 2071.0 2071.0-- Tape Time (hrs:min)0:03 0:03 0:00 Tape Size (meg) 172.3 172.30.0 Tape Used (%) 1.51.50.0 Filesystems Taped 3 3 0 Avg Tp Write Rate (k/s) 997.0 997.0-- FAILED AND STRANGE DUMP DETAILS: /-- ulysses.la /var lev 0 STRANGE sendbackup: start [ulysses.lan.ulysses.be:/var level 0] sendbackup: info BACKUP=/bin/tar sendbackup: info RECOVER_CMD=/bin/tar -f... - sendbackup: info end ? gtar: ./log/kern.log: file changed as we read it ? gtar: ./log/messages: file changed as we read it | gtar: ./run/courier/authdaemon/socket: socket ignored | gtar: ./run/lprng/socket: socket ignored | gtar: ./spool/postfix/private/bounce: socket ignored | gtar: ./spool/postfix/private/bsmtp: socket ignored | gtar: ./spool/postfix/private/cyrus: socket ignored | gtar: ./spool/postfix/private/defer: socket ignored | gtar: ./spool/postfix/private/error: socket ignored | gtar: ./spool/postfix/private/ifmail: socket ignored | gtar: ./spool/postfix/private/lmtp: socket ignored | gtar: ./spool/postfix/private/local: socket ignored | gtar: ./spool/postfix/private/rewrite: socket ignored | gtar: ./spool/postfix/private/scalemail-backend: socket ignored | gtar: ./spool/postfix/private/smtp: socket ignored | gtar: ./spool/postfix/private/uucp: socket ignored | gtar: ./spool/postfix/private/virtual: socket ignored | gtar: ./spool/postfix/public/cleanup: socket ignored | gtar: ./spool/postfix/public/flush: socket ignored | gtar: ./spool/postfix/public/showq: socket ignored | Total bytes written: 150425600 (143MB, 1.9MB/s) sendbackup: size 146900 sendbackup: end \ NOTES: planner: Last full dump of ulysses.lan.ulysses.be:/usr on tape overwritten in 1 run. planner: Last full dump of ulysses.lan.ulysses.be:/home on tape overwritten in 1 run. taper: tape VRIJDAG_01 kb 176480 fm 3 [OK] DUMP SUMMARY: DUMPER STATSTAPER STATS HOSTNAME DISKL ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s -- - ulysses.lan. / 0 27104 27104 --0:112516.7 0:29 935.1 ulysses.lan. /boot 02368 2368 --0:005228.2 0:05 441.1 ulysses.lan. /home 0 FAILED --- ulysses.lan. /usr0 FAILED --- ulysses.lan. /var0 146912 146912 --1:141986.7 2:231030.8 (brought to you by Amanda version 2.4.2p2) Found the problem. The firewall blocked communication between taper and dumper. Marc
Re: No index records problem
Yep, I installed newer tar and it solved my problems on that client! Thanks alot! Martin > On Fri, 26 Sep 2003 at 6:16pm, Martin wrote > > > Jon, I have successfully gunzipped the indexfile. Amanda is backing up > > exactly one directory on the client and that directory contains just one > > file. Here are the contents of the gunzipped file: > > > > 07735043175/./ > > 07735042527/./pc28_21092003_03.tar.gz > > > > The filename above is indeed the file amanda should backup. > > Does this look like a correct index file? It does to me. Any > > suggestions? > > Your index is corrupt because you're using a bad version of tar. You need > 1.13.19 or 1.13.25 (available at alpha.gnu.org). >