Re: amrecover: Extractor child exited with status 2
Op vr 02mei08 om 05:59 schreef Yogesh Hasabnis: ... I observe the following error for every tape cartridge: tar: Error exit delayed from previous errors. amrecover: Extractor child exited with status 2 extract_list - child returned non-zero status: 1 I want to know about how serious this error is and would be grateful if I get some suggestion for resolving this error. I unwillingly came across this situation a few days ago. I was disturbed by the tar message, but quickly learned that it had to I do with previous tar errors I had seen. In my case I was very happy with this behaviour of tar, because it kept on doing what it was asked to do. So: I think you should try to get hold of those 'previous errors' (i.e. read between the lines of the verbose output of tar) to see how serious they are. Gerrit
Out of space problem
Hi All I'm experiencing an odd problem with a USB DAT drive that keeps running out of space. Apologies for the length of the post. The drive is supposed to be 36 / 72 GB. Here's the kind of thing I see when I run a level 0 dump. These dumps were to tape DailySet1-18. *** A TAPE ERROR OCCURRED: [No more writable valid tape found]. Some dumps may have been left in the holding disk. Run amflush to flush them to tape. The next tape Amanda expects to use is: DailySet1-19. FAILURE AND STRANGE DUMP SUMMARY: mail..com.au mapper/VolGroup00-LogVol00 lev 0 FAILED [out of tape] STATISTICS: Total Full Incr. Estimate Time (hrs:min)0:04 Run Time (hrs:min)14:44 Dump Time (hrs:min) 11:22 11:22 0:00 Output Size (meg) 33927.133927.10.0 Original Size (meg) 50710.150710.00.0 Avg Compressed Size (%)66.9 66.9 10.0 (level:#disks ...) Filesystems Dumped2 1 1 (1:1) Avg Dump Rate (k/s) 849.1 849.18.5 Tape Time (hrs:min)0:00 0:00 0:00 Tape Size (meg) 0.00.00.0 Tape Used (%) 0.00.00.0 (level:#disks ...) Filesystems Taped 1 0 1 (1:1) Chunks Taped 0 0 0 Avg Tp Write Rate (k/s) 7.4-- 7.4 USAGE BY TAPE: Label Time Size %NbNc DailySet1-18 0:00 32K0.0 1 0 NOTES: planner: Forcing full dump of mail..com.au:mapper/VolGroup00-LogVol00 as directed. taper: tape DailySet1-18 kb 31022240 fm 2 writing file: No space left on device driver: Taper error: [writing file: No space left on device] driver: going into degraded mode because of taper component error. big estimate: mail..com.au sda1 1 est: 64Kout 32K Here is the amanda.conf file with everything not used snipped out: org DailySet1 # your organization name for reports mailto amandabackup # space separated list of operators at your site dumpuser amandabackup # the user to run dumps under inparallel 4# maximum dumpers that will run in parallel (max 63) dumporder sssS# specify the priority order of each dumper taperalgo first # The algorithm used to choose which dump image to send displayunit k # Possible values: k|m|g|t netusage 600 Kbps # maximum net bandwidth for Amanda, in KB per sec dumpcycle 4 weeks # the number of days in the normal dump cycle runspercycle 20 # the number of amdump runs in dumpcycle days tapecycle 21 tapes # the number of tapes in rotation bumpsize 20 Mb # minimum savings (threshold) to bump level 1 - 2 bumppercent 20 # minimum savings (threshold) to bump level 1 - 2 bumpdays 1 # minimum days at each level bumpmult 4 # threshold = bumpsize * bumpmult^(level-1) etimeout 300# number of seconds per filesystem for estimates. dtimeout 1800 # number of idle seconds before a dump is aborted. ctimeout 30 # maximum number of seconds that amcheck waits tapebufs 20 runtapes 1 # number of tapes to be used in a single run of amdump tapedev /dev/nst0 # the no-rewind tape device to be used changerfile /etc/amanda/DailySet1/changer.conf changerdev /dev/null maxdumpsize -1 # Maximum number of bytes the planner will schedule tapetype HP-DAT72 # what kind of tape it is (see tapetypes below) labelstr ^DailySet1-[0-9][0-9]*$ # label constraint regex: all tapes must match amrecover_do_fsf yes# amrecover will call amrestore with the amrecover_check_label yes # amrecover will call amrestore with the amrecover_changer null: # amrecover will use the changer if you restore holdingdisk hd1 { comment main holding disk directory /dumps/amanda # where the holding disk is use -10 Gb # how much space can we use on it chunksize 1Gb # size of chunk if you want big dump to be } autoflush no # infofile /etc/amanda/DailySet1/curinfo# database DIRECTORY logdir /etc/amanda/DailySet1# log directory indexdir /etc/amanda/DailySet1/index # index directory define tapetype HP-DAT72 { comment HP DAT72 USB with hardware compression on length 72 G } define dumptype global { comment Global definitions } define dumptype custom-compress { global program GNUTAR comment Dump with custom client compression exclude list /etc/amanda/exclude.gtar compress client custom client_custom_compress /usr/bin/bzip2 } define interface local { comment a local disk use 1000 kbps } define interface le0 { comment 10 Mbps ethernet use 400 kbps } and finally the disklist: