Re: The next tape Amanda expects to use is: DailySet104 and the DailSet104 is in the drive.
Chuck Amadi Systems Administrator wrote: Hi all I have running amanda for a week but Fridays tape DailySet4 didn't get backed up because The DailySet4 tape is in the drive but my amanda doesn't think So. What is the best way to check what amanda tape it is as I assume when labelling I may of made a mistake. Is there a amanda program that will check what tape I have in the drive. *** A TAPE ERROR OCCURRED: [not an amanda tape]. Some dumps may have been left in the holding disk. Run amflush to flush them to tape. The next tape Amanda expects to use is: DailySet104. Here is the message when I run amverify Defects file is /tmp/amanda/amverify.20028/defects amverify DailySet1 Mon Jun 27 15:41:39 BST 2005 Using device /dev/nst0 Waiting for device to go ready... Rewinding... Processing label... ** No amanda tape in slot So whats the best step to correct this. Cheers I would try amtape [config] show. Vicki
Re: The next tape Amanda expects to use is: DailySet104 and the DailSet104 is in the drive.
Hi I don't have no tpchanger specified in my ~amanda.conf As below # Specify tape device and/or tape changer. If you don't have a tape # changer, and you don't want to use more than one tape per run of # amdump, just comment out the definition of tpchanger. I am only using one tape per run that does a full backup onto tape. Thus is there a way to check my tapes I did orderly label them but need to verify which tape is DailySet4. Cheers On Mon, 2005-06-27 at 10:51 -0500, Vicki Stanfield wrote: Chuck Amadi Systems Administrator wrote: Hi all I have running amanda for a week but Fridays tape DailySet4 didn't get backed up because The DailySet4 tape is in the drive but my amanda doesn't think So. What is the best way to check what amanda tape it is as I assume when labelling I may of made a mistake. Is there a amanda program that will check what tape I have in the drive. *** A TAPE ERROR OCCURRED: [not an amanda tape]. Some dumps may have been left in the holding disk. Run amflush to flush them to tape. The next tape Amanda expects to use is: DailySet104. Here is the message when I run amverify Defects file is /tmp/amanda/amverify.20028/defects amverify DailySet1 Mon Jun 27 15:41:39 BST 2005 Using device /dev/nst0 Waiting for device to go ready... Rewinding... Processing label... ** No amanda tape in slot So whats the best step to correct this. Cheers I would try amtape [config] show. Vicki -- Unix/ Linux Systems Administrator Chuck Amadi The Surgical Material Testing Laboratory (SMTL), Princess of Wales Hospital Coity Road Bridgend, United Kingdom, CF31 1RQ. Email chuck.smtl.co.uk Tel: +44 1656 752820 Fax: +44 1656 752830
Re: The next tape Amanda expects to use is: DailySet104 and the DailSet104 is in the drive.
Chuck Amadi Systems Administrator wrote: Hi I don't have no tpchanger specified in my ~amanda.conf As below # Specify tape device and/or tape changer. If you don't have a tape # changer, and you don't want to use more than one tape per run of # amdump, just comment out the definition of tpchanger. I am only using one tape per run that does a full backup onto tape. Thus is there a way to check my tapes I did orderly label them but need to verify which tape is DailySet4. Cheers On Mon, 2005-06-27 at 10:51 -0500, Vicki Stanfield wrote: Chuck Amadi Systems Administrator wrote: Hi all I have running amanda for a week but Fridays tape DailySet4 didn't get backed up because The DailySet4 tape is in the drive but my amanda doesn't think So. What is the best way to check what amanda tape it is as I assume when labelling I may of made a mistake. Is there a amanda program that will check what tape I have in the drive. *** A TAPE ERROR OCCURRED: [not an amanda tape]. Some dumps may have been left in the holding disk. Run amflush to flush them to tape. The next tape Amanda expects to use is: DailySet104. Here is the message when I run amverify Defects file is /tmp/amanda/amverify.20028/defects amverify DailySet1 Mon Jun 27 15:41:39 BST 2005 Using device /dev/nst0 Waiting for device to go ready... Rewinding... Processing label... ** No amanda tape in slot So whats the best step to correct this. Cheers I would try amtape [config] show. Vicki Sorry. I didn't notice that in your earlier email. How about using dd to read the header info off the tape? Vicki
Re: The next tape Amanda expects to use is: DailySet104 and the DailSet104 is in the drive.
Vicki Stanfield wrote: Sorry. I didn't notice that in your earlier email. How about using dd to read the header info off the tape? Umm, please, no ... at least NOT YET ... Chuck, why not simply use amcheck -s conf? It checks if the inserted tape is the one to write to as well ... Stefan -- Stefan G. Weichinger AMANDA core team member mailto://[EMAIL PROTECTED] -- oops! linux consulting implementation http://www.oops.co.at --