Re: Saeagate IDE Streamer won't work.
On Wed, Nov 21, 2001 at 08:00:17PM -0500, harald wrote: [...] > FAILED AND STRANGE DUMP DETAILS: > > /-- localhost /home lev 0 FAILED [/sbin/dump returned 1] > sendbackup: start [localhost:/home level 0] > sendbackup: info BACKUP=/sbin/dump > sendbackup: info RECOVER_CMD=/bin/gzip -dc |/sbin/restore -f... - > sendbackup: info COMPRESS_SUFFIX=.gz > sendbackup: info end > ? You can't update the dumpdates file when dumping a subdirectory > sendbackup: error [/sbin/dump returned 1] > \ Don't use dump if /home is not a filesystem. Use tar instead.
Re: Saeagate IDE Streamer won't work.
Hello, still got problems got my Seagate IDE Streamer worked with amanda. - > > Don't use dump if /home is not a filesystem. Use tar instead. Thank you, i did the neccasary modifications and use tar now. Please see the following errormessage generated by amanda. Please Help. Bye, Harald. attached Mail begins here. >From [EMAIL PROTECTED] Fri Nov 30 22:05:19 2001 Date: Thu, 22 Nov 2001 23:10:53 -0500 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: DailySet1 AMANDA MAIL REPORT FOR November 22, 2001 These dumps were to tape tape01. The next tape Amanda expects to use is: a new tape. FAILURE AND STRANGE DUMP SUMMARY: localhost /mnt/hda9/install lev 0 FAILED [missing result for /mnt/hda9/install in localhost response] STATISTICS: Total Full Daily --- Estimate Time (hrs:min) 0:00 Run Time (hrs:min) 2:03 Dump Time (hrs:min) 0:00 0:00 0:00 Output Size (meg) 0.0 0.0 0.0 Original Size (meg) 0.0 0.0 0.0 Avg Compressed Size (%) -- -- -- Filesystems Dumped 0 0 0 Avg Dump Rate (k/s) -- -- -- Tape Time (hrs:min) 0:00 0:00 0:00 Tape Size (meg) 0.0 0.0 0.0 Tape Used (%) 0.0 0.0 0.0 Filesystems Taped 0 0 0 Avg Tp Write Rate (k/s) -- -- -- NOTES: planner: Adding new disk localhost:/mnt/hda9/install. driver: WARNING: got empty schedule from planner taper: tape tape01 kb 0 fm 0 [OK] DUMP SUMMARY: DUMPER STATS TAPER STATS HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s -- - ---localhost -a9/install 0 FAILED -- (brought to you by Amanda version 2.4.2p2)
Re: Saeagate IDE Streamer won't work.
Hello, thanx for your help. I am not shure if it is working now, but i found a problem with my hardware. Seems to be a damaged cable which causes problems. When i was trying to read from cd-rom (wich is connectet to the same cable) my whole system hangs. I think it should work now. Thanks again for your help. Bye, Harald. Am Sonntag, 2. Dezember 2001 10:21 schrieb Joshua Baker-LePain: > On Fri, 30 Nov 2001 at 10:14pm, harald wrote > > > still got problems got my Seagate IDE Streamer worked with amanda. > > From the output below, the tape drive isn't even part of the equation yet. > If you're worried about whether or not it's working, tar some stuff to it > by hand. But amanda hasn't even tried to write to tape yet. > > > FAILURE AND STRANGE DUMP SUMMARY: localhost /mnt/hda9/install lev 0 > > FAILED [missing result for /mnt/hda9/install in localhost response] > > > > > > STATISTICS: Total Full Daily --- > > Estimate Time (hrs:min) 0:00 > > Run Time (hrs:min) 2:03 Dump Time (hrs:min) 0:00 0:00 0:00 Output Size > > (meg) 0.0 0.0 0.0 Original Size (meg) 0.0 0.0 0.0 Avg Compressed Size (%) > > -- -- -- Filesystems Dumped 0 0 0 Avg Dump Rate (k/s) -- -- -- > > > > Tape Time (hrs:min) 0:00 0:00 0:00 Tape Size (meg) 0.0 0.0 0.0 Tape Used > > (%) 0.0 0.0 0.0 Filesystems Taped 0 0 0 Avg Tp Write Rate (k/s) -- -- -- > > So, amanda ran for two hours, and generated *no* dump images (thus nothing > to put on tape). From the summary above, it didn't get an estimate for > /mnt/hda9/install. The two hours indicates that you're hitting a timeout > for the estimates. You can raise 'etimeout' in amanda.conf, but something > else is probably wrong. > > Is /mnt/hda9/install a local filesystem? If it is, what type of disk is > it, and are you seeing any errors in the system logs? If it isn't (e.g. > if it's NFS mounted), then you should really put amanda on the system > hosting the FS.
Re: Saeagate IDE Streamer won't work.
On Fri, 30 Nov 2001 at 10:14pm, harald wrote > still got problems got my Seagate IDE Streamer worked with amanda. >From the output below, the tape drive isn't even part of the equation yet. If you're worried about whether or not it's working, tar some stuff to it by hand. But amanda hasn't even tried to write to tape yet. > FAILURE AND STRANGE DUMP SUMMARY: localhost /mnt/hda9/install lev 0 FAILED > [missing result for /mnt/hda9/install in localhost response] > > > STATISTICS: Total Full Daily --- > Estimate Time (hrs:min) 0:00 > Run Time (hrs:min) 2:03 Dump Time (hrs:min) 0:00 0:00 0:00 Output Size (meg) > 0.0 0.0 0.0 Original Size (meg) 0.0 0.0 0.0 Avg Compressed Size (%) -- -- -- > Filesystems Dumped 0 0 0 Avg Dump Rate (k/s) -- -- -- > > Tape Time (hrs:min) 0:00 0:00 0:00 Tape Size (meg) 0.0 0.0 0.0 Tape Used (%) > 0.0 0.0 0.0 Filesystems Taped 0 0 0 Avg Tp Write Rate (k/s) -- -- -- So, amanda ran for two hours, and generated *no* dump images (thus nothing to put on tape). From the summary above, it didn't get an estimate for /mnt/hda9/install. The two hours indicates that you're hitting a timeout for the estimates. You can raise 'etimeout' in amanda.conf, but something else is probably wrong. Is /mnt/hda9/install a local filesystem? If it is, what type of disk is it, and are you seeing any errors in the system logs? If it isn't (e.g. if it's NFS mounted), then you should really put amanda on the system hosting the FS. -- Joshua Baker-LePain Department of Biomedical Engineering Duke University
Re: Saeagate IDE Streamer won't work.
Hello, still got problems got my Seagate IDE Streamer worked with amanda. - > > Don't use dump if /home is not a filesystem. Use tar instead. Thank you, i did the neccasary modifications and use tar now. Please see the following errormessage generated by amanda. Please Help. Bye, Harald. attached Mail begins here. >From [EMAIL PROTECTED] Fri Nov 30 22:05:19 2001 Date: Thu, 22 Nov 2001 23:10:53 -0500 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: DailySet1 AMANDA MAIL REPORT FOR November 22, 2001 These dumps were to tape tape01. The next tape Amanda expects to use is: a new tape. FAILURE AND STRANGE DUMP SUMMARY: localhost /mnt/hda9/install lev 0 FAILED [missing result for /mnt/hda9/install in localhost response] STATISTICS: Total Full Daily --- Estimate Time (hrs:min) 0:00 Run Time (hrs:min) 2:03 Dump Time (hrs:min) 0:00 0:00 0:00 Output Size (meg) 0.0 0.0 0.0 Original Size (meg) 0.0 0.0 0.0 Avg Compressed Size (%) -- -- -- Filesystems Dumped 0 0 0 Avg Dump Rate (k/s) -- -- -- Tape Time (hrs:min) 0:00 0:00 0:00 Tape Size (meg) 0.0 0.0 0.0 Tape Used (%) 0.0 0.0 0.0 Filesystems Taped 0 0 0 Avg Tp Write Rate (k/s) -- -- -- NOTES: planner: Adding new disk localhost:/mnt/hda9/install. driver: WARNING: got empty schedule from planner taper: tape tape01 kb 0 fm 0 [OK] DUMP SUMMARY: DUMPER STATS TAPER STATS HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s -- - ---localhost -a9/install 0 FAILED -- (brought to you by Amanda version 2.4.2p2)
Re: Saeagate IDE Streamer won't work.
On Fri, 30 Nov 2001 at 5:22pm, harald wrote > i am trying to get my Seagate STT28000A, IDE Streamer to work with amanda. > In the config file i entered "dev/ht0" for raw device and "dev/nht0" for no > rewinding device. > Is my streamer not supported by the Mandrake Kernel 2.4.7? > Do i have to set up something special in Bios? > I compiled my own kernel with IDE Tape support as module and i also tried to > compile it as a kerneldriver. Can you dump to the device by hand? That will test whether or not it's working. > FAILED AND STRANGE DUMP DETAILS: > > /-- localhost /home lev 0 FAILED [/sbin/dump returned 1] > sendbackup: start [localhost:/home level 0] > sendbackup: info BACKUP=/sbin/dump > sendbackup: info RECOVER_CMD=/bin/gzip -dc |/sbin/restore -f... - > sendbackup: info COMPRESS_SUFFIX=.gz > sendbackup: info end > ? You can't update the dumpdates file when dumping a subdirectory ^^^ Ah ha. You're trying to backup something that isn't a partition. You can't do that with dump. Configure amanda to use tar instead. -- Joshua Baker-LePain Department of Biomedical Engineering Duke University
Re: Saeagate IDE Streamer won't work.
Am Freitag, 30. November 2001 17:22 schrieb harald: > Hallo, > > i am trying to get my Seagate STT28000A, IDE Streamer to work with amanda. > In the config file i entered "dev/ht0" for raw device and "dev/nht0" for no > rewinding device. > Is my streamer not supported by the Mandrake Kernel 2.4.7? > Do i have to set up something special in Bios? > I compiled my own kernel with IDE Tape support as module and i also tried > to compile it as a kerneldriver. > In the forwarded message you can see the errors reported by amanda. > > Please Help. > > Bye, Harald. > > -- Forwarded message -- > Date: Wed, 31 Oct 2001 00:06:51 -0500 > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Subject: DailySet1 AMANDA MAIL REPORT FOR October 31, 2001 > > *** THE DUMPS DID NOT FINISH PROPERLY! > > These dumps were to tape tape01. > The next tape Amanda expects to use is: a new tape. > > FAILURE AND STRANGE DUMP SUMMARY: > localhost /home lev 0 FAILED [/sbin/dump returned 1] > > > STATISTICS: > Total Full Daily > > Estimate Time (hrs:min)0:00 > Run Time (hrs:min) 0:00 > Dump Time (hrs:min)0:00 0:00 0:00 > Output Size (meg) 0.00.00.0 > Original Size (meg) 0.00.00.0 > Avg Compressed Size (%) -- -- -- > Filesystems Dumped0 0 0 > Avg Dump Rate (k/s) -- -- -- > > Tape Time (hrs:min)0:00 0:00 0:00 > Tape Size (meg) 0.00.00.0 > Tape Used (%) 0.00.00.0 > Filesystems Taped 0 0 0 > Avg Tp Write Rate (k/s) -- -- -- > > > FAILED AND STRANGE DUMP DETAILS: > > /-- localhost /home lev 0 FAILED [/sbin/dump returned 1] > sendbackup: start [localhost:/home level 0] > sendbackup: info BACKUP=/sbin/dump > sendbackup: info RECOVER_CMD=/bin/gzip -dc |/sbin/restore -f... - > sendbackup: info COMPRESS_SUFFIX=.gz > sendbackup: info end > ? You can't update the dumpdates file when dumping a subdirectory > sendbackup: error [/sbin/dump returned 1] > \ > > > NOTES: > planner: Adding new disk localhost:/home. > taper: tape tape01 kb 0 fm 0 [OK] > > > DUMP SUMMARY: > DUMPER STATSTAPER STATS > HOSTNAME DISKL ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s > -- - > localhost/home 0 FAILED --- > > (brought to you by Amanda version 2.4.2p1)
Saeagate IDE Streamer won't work.
Hallo,
i am trying to get my Seagate STT28000A, IDE Streamer to work with amanda.
In the config file i entered "dev/ht0" for raw device and "dev/nht0" for no
rewinding device.
Is my streamer not supported by the Mandrake Kernel 2.4.7?
Do i have to set up something special in Bios?
I compiled my own kernel with IDE Tape support as module and i also tried to
compile it as a kerneldriver.
In the forwarded message you can see the errors reported by amanda.
Please Help.
Bye, Harald.
-- Forwarded message --
Date: Wed, 31 Oct 2001 00:06:51 -0500
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: DailySet1 AMANDA MAIL REPORT FOR October 31, 2001
*** THE DUMPS DID NOT FINISH PROPERLY!
These dumps were to tape tape01.
The next tape Amanda expects to use is: a new tape.
FAILURE AND STRANGE DUMP SUMMARY:
localhost /home lev 0 FAILED [/sbin/dump returned 1]
STATISTICS:
Total Full Daily
Estimate Time (hrs:min)0:00
Run Time (hrs:min) 0:00
Dump Time (hrs:min)0:00 0:00 0:00
Output Size (meg) 0.00.00.0
Original Size (meg) 0.00.00.0
Avg Compressed Size (%) -- -- --
Filesystems Dumped0 0 0
Avg Dump Rate (k/s) -- -- --
Tape Time (hrs:min)0:00 0:00 0:00
Tape Size (meg) 0.00.00.0
Tape Used (%) 0.00.00.0
Filesystems Taped 0 0 0
Avg Tp Write Rate (k/s) -- -- --
FAILED AND STRANGE DUMP DETAILS:
/-- localhost /home lev 0 FAILED [/sbin/dump returned 1]
sendbackup: start [localhost:/home level 0]
sendbackup: info BACKUP=/sbin/dump
sendbackup: info RECOVER_CMD=/bin/gzip -dc |/sbin/restore -f... -
sendbackup: info COMPRESS_SUFFIX=.gz
sendbackup: info end
? You can't update the dumpdates file when dumping a subdirectory
sendbackup: error [/sbin/dump returned 1]
\
NOTES:
planner: Adding new disk localhost:/home.
taper: tape tape01 kb 0 fm 0 [OK]
DUMP SUMMARY:
DUMPER STATSTAPER STATS
HOSTNAME DISKL ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
-- -
localhost/home 0 FAILED ---
(brought to you by Amanda version 2.4.2p1)
Saeagate IDE Streamer won't work.
Hallo,
i am trying to get my Seagate STT28000A, IDE Streamer to work with amanda.
In the config file i entered "dev/ht0" for raw device and "dev/nht0" for no
rewinding device.
Is my streamer not supported by the Mandrake Kernel 2.4.7?
Do i have to set up something special in Bios?
I compiled my own kernel with IDE Tape support as module and i also tried to
compile it as a kerneldriver.
In the forwarded message you can see the errors reported by amanda.
Please Help.
Bye, Harald.
-- Forwarded message --
Date: Wed, 31 Oct 2001 00:06:51 -0500
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: DailySet1 AMANDA MAIL REPORT FOR October 31, 2001
*** THE DUMPS DID NOT FINISH PROPERLY!
These dumps were to tape tape01.
The next tape Amanda expects to use is: a new tape.
FAILURE AND STRANGE DUMP SUMMARY:
localhost /home lev 0 FAILED [/sbin/dump returned 1]
STATISTICS:
Total Full Daily
Estimate Time (hrs:min)0:00
Run Time (hrs:min) 0:00
Dump Time (hrs:min)0:00 0:00 0:00
Output Size (meg) 0.00.00.0
Original Size (meg) 0.00.00.0
Avg Compressed Size (%) -- -- --
Filesystems Dumped0 0 0
Avg Dump Rate (k/s) -- -- --
Tape Time (hrs:min)0:00 0:00 0:00
Tape Size (meg) 0.00.00.0
Tape Used (%) 0.00.00.0
Filesystems Taped 0 0 0
Avg Tp Write Rate (k/s) -- -- --
FAILED AND STRANGE DUMP DETAILS:
/-- localhost /home lev 0 FAILED [/sbin/dump returned 1]
sendbackup: start [localhost:/home level 0]
sendbackup: info BACKUP=/sbin/dump
sendbackup: info RECOVER_CMD=/bin/gzip -dc |/sbin/restore -f... -
sendbackup: info COMPRESS_SUFFIX=.gz
sendbackup: info end
? You can't update the dumpdates file when dumping a subdirectory
sendbackup: error [/sbin/dump returned 1]
\
NOTES:
planner: Adding new disk localhost:/home.
taper: tape tape01 kb 0 fm 0 [OK]
DUMP SUMMARY:
DUMPER STATSTAPER STATS
HOSTNAME DISKL ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
-- -
localhost/home 0 FAILED ---
(brought to you by Amanda version 2.4.2p1)
Re: Saeagate IDE Streamer won't work.
On Wed, Nov 21, 2001 at 08:00:17PM -0500, harald wrote: [...] > FAILED AND STRANGE DUMP DETAILS: > > /-- localhost /home lev 0 FAILED [/sbin/dump returned 1] > sendbackup: start [localhost:/home level 0] > sendbackup: info BACKUP=/sbin/dump > sendbackup: info RECOVER_CMD=/bin/gzip -dc |/sbin/restore -f... - > sendbackup: info COMPRESS_SUFFIX=.gz > sendbackup: info end > ? You can't update the dumpdates file when dumping a subdirectory > sendbackup: error [/sbin/dump returned 1] > \ Don't use dump if /home is not a filesystem. Use tar instead.
