Re: [BUG] AMD Radeon Pro 5600M with 8GB of HBM2 memory shows blank screen on Linux
> > Can you file a bug report: > https://gitlab.freedesktop.org/drm/amd/-/issues/ https://gitlab.freedesktop.org/drm/amd/-/issues/2318 > > What sort of monitor are you using? It looks to be failing mode validation: > [drm] Mode Validation Warning: Urgent latency failed validation. > Well its Apple's 16 inch built in Retina display. The same is used in models with :- 1. AMD Radeon Pro 5300M with 4GB of GDDR6 memory 2. AMD Radeon Pro 5500M with 4GB of GDDR6 memory 3. AMD Radeon Pro 5500M with 8GB of GDDR6 memory But these models work perfectly with AMD GPU enabled.
[BUG] AMD Radeon Pro 5600M with 8GB of HBM2 memory shows blank screen on Linux
The AMD Radeon Pro 5600M with 8GB of HBM2 memory GPU is found in MacBook Pro 16 inch, 2019 (MacBookPro16,4). The GPU fails to work on Linux, thus a blank black screen gets displayed on boot. If nomodeset is added as a kernel parameter, we are able to access Linux easily. The link below contains the journalctl of the failed boot :- https://gist.github.com/AdityaGarg8/dfe1a1c23bf2b92b640dad89f55b73c7 Thanks Aditya
Re: [PATCH RESEND] drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
> On 28-Jan-2022, at 8:33 PM, Harry Wentland wrote: > > I think either leaving the 2017 quirk in its original place or moving it down > works. I don't have a strong preference. I’d better leave it in the original place then > > With the comment style addressed this patch is Sending a v2 now with this issue addressed. > Reviewed-by: Harry Wentland > > Harry
[PATCH v2] drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
From: Aun-Ali Zaidi
The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.
For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.
Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.
Tested-by: Aun-Ali Zaidi
Reviewed-by: Harry Wentland
Signed-off-by: Aun-Ali Zaidi
Signed-off-by: Aditya Garg
---
v2 :- Use C styled comments
.../gpu/drm/amd/display/dc/core/dc_link_dp.c | 20 +++
1 file changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 05e216524..086f7ee2c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5597,6 +5597,26 @@ static bool retrieve_link_cap(struct dc_link *link)
dp_hw_fw_revision.ieee_fw_rev,
sizeof(dp_hw_fw_revision.ieee_fw_rev));
+ /* Quirk for Apple MBP 2018 15" Retina panels: wrong DP_MAX_LINK_RATE */
+ {
+ uint8_t str_mbp_2018[] = { 101, 68, 21, 103, 98, 97 };
+ uint8_t fwrev_mbp_2018[] = { 7, 4 };
+ uint8_t fwrev_mbp_2018_vega[] = { 8, 4 };
+
+ /* We also check for the firmware revision as 16,1 models have
an
+* identical device id and are incorrectly quirked otherwise.
+*/
+ if ((link->dpcd_caps.sink_dev_id == 0x0010fa) &&
+ !memcmp(link->dpcd_caps.sink_dev_id_str, str_mbp_2018,
+sizeof(str_mbp_2018)) &&
+ (!memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018,
+sizeof(fwrev_mbp_2018)) ||
+ !memcmp(link->dpcd_caps.sink_fw_revision,
fwrev_mbp_2018_vega,
+sizeof(fwrev_mbp_2018_vega {
+ link->reported_link_cap.link_rate = LINK_RATE_RBR2;
+ }
+ }
+
memset(>dpcd_caps.dsc_caps, '\0',
sizeof(link->dpcd_caps.dsc_caps));
memset(>dpcd_caps.fec_cap, '\0', sizeof(link->dpcd_caps.fec_cap));
--
2.25.1
Re: [PATCH RESEND] drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
Hi Alex > On 27-Jan-2022, at 11:06 PM, Alex Deucher wrote: > > C style comments please. Shall be fixed in v2 > I'll let one of the display guys comment on > the rest of the patch. Seems reasonable, we have a similar quirk for > the Apple MBP 2017 15" Retina panel later in this function. Could you > move this next to the other quirk? I guess moving it next to the other quirk may break the functionality of this quirk, cause the MBP 2018 one involves stuff regarding firmware revision as well. The original patch applies the quirk after the following lines of the code :- core_link_read_dpcd( link, DP_SINK_HW_REVISION_START, (uint8_t *)_hw_fw_revision, sizeof(dp_hw_fw_revision)); link->dpcd_caps.sink_hw_revision = dp_hw_fw_revision.ieee_hw_rev; memmove( link->dpcd_caps.sink_fw_revision, dp_hw_fw_revision.ieee_fw_rev, sizeof(dp_hw_fw_revision.ieee_fw_rev)); Which seem to related to the firmware stuff. Moving it along with the 2017 quirk doesn't sound right to me, as this shall move the quirk BEFORE these lines of code instead. Maybe the author also knowingly added the quirk after these lines of code? As a workaround, could we move the 2017 quirk later, instead of moving the 2018 quirk before? This sounds more logical to me. Regards Aditya
[PATCH RESEND] drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
From: Aun-Ali Zaidi
The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.
For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.
Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.
Tested-by: Aun-Ali Zaidi
Signed-off-by: Aun-Ali Zaidi
Signed-off-by: Aditya Garg
---
.../gpu/drm/amd/display/dc/core/dc_link_dp.c | 19 +++
1 file changed, 19 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 05e216524..17939ad17 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5597,6 +5597,25 @@ static bool retrieve_link_cap(struct dc_link *link)
dp_hw_fw_revision.ieee_fw_rev,
sizeof(dp_hw_fw_revision.ieee_fw_rev));
+ /* Quirk for Apple MBP 2018 15" Retina panels: wrong DP_MAX_LINK_RATE */
+ {
+ uint8_t str_mbp_2018[] = { 101, 68, 21, 103, 98, 97 };
+ uint8_t fwrev_mbp_2018[] = { 7, 4 };
+ uint8_t fwrev_mbp_2018_vega[] = { 8, 4 };
+
+ // We also check for the firmware revision as 16,1 models have
an
+ // identical device id and are incorrectly quirked otherwise.
+ if ((link->dpcd_caps.sink_dev_id == 0x0010fa) &&
+ !memcmp(link->dpcd_caps.sink_dev_id_str, str_mbp_2018,
+sizeof(str_mbp_2018)) &&
+ (!memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018,
+sizeof(fwrev_mbp_2018)) ||
+ !memcmp(link->dpcd_caps.sink_fw_revision,
fwrev_mbp_2018_vega,
+sizeof(fwrev_mbp_2018_vega {
+ link->reported_link_cap.link_rate = LINK_RATE_RBR2;
+ }
+ }
+
memset(>dpcd_caps.dsc_caps, '\0',
sizeof(link->dpcd_caps.dsc_caps));
memset(>dpcd_caps.fec_cap, '\0', sizeof(link->dpcd_caps.fec_cap));
--
2.25.1
[PATCH] drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
From: Aun-Ali Zaidi
The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.
For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.
Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.
Tested-by: Aun-Ali Zaidi
Signed-off-by: Aun-Ali Zaidi
Signed-off-by: Aditya Garg
---
.../gpu/drm/amd/display/dc/core/dc_link_dp.c | 19 +++
1 file changed, 19 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 05e216524..17939ad17 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5597,6 +5597,25 @@ static bool retrieve_link_cap(struct dc_link *link)
dp_hw_fw_revision.ieee_fw_rev,
sizeof(dp_hw_fw_revision.ieee_fw_rev));
+ /* Quirk for Apple MBP 2018 15" Retina panels: wrong DP_MAX_LINK_RATE */
+ {
+ uint8_t str_mbp_2018[] = { 101, 68, 21, 103, 98, 97 };
+ uint8_t fwrev_mbp_2018[] = { 7, 4 };
+ uint8_t fwrev_mbp_2018_vega[] = { 8, 4 };
+
+ // We also check for the firmware revision as 16,1 models have
an
+ // identical device id and are incorrectly quirked otherwise.
+ if ((link->dpcd_caps.sink_dev_id == 0x0010fa) &&
+ !memcmp(link->dpcd_caps.sink_dev_id_str, str_mbp_2018,
+sizeof(str_mbp_2018)) &&
+ (!memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018,
+sizeof(fwrev_mbp_2018)) ||
+ !memcmp(link->dpcd_caps.sink_fw_revision,
fwrev_mbp_2018_vega,
+sizeof(fwrev_mbp_2018_vega {
+ link->reported_link_cap.link_rate = LINK_RATE_RBR2;
+ }
+ }
+
memset(>dpcd_caps.dsc_caps, '\0',
sizeof(link->dpcd_caps.dsc_caps));
memset(>dpcd_caps.fec_cap, '\0', sizeof(link->dpcd_caps.fec_cap));
--
2.25.1
