Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread Todd Bigelow - PS

B. Morgan Sherrod wrote:

- Original Message - 
From: "David Knepper" <[EMAIL PROTECTED]>

To: <[EMAIL PROTECTED]>; 
Sent: Monday, May 24, 2004 10:37 AM
Subject: [AMRadio] Thordarson Transformer ID


 


I have a very large high voltage Thordarson transformer that appears to be a 
PUV type.  There are no identification
   


labels, etc. but the original owner did identify it as a Thordarson.
 



Does it look similar to this one?

http://www.arksky.org/temp/01080001.JPG



Yeow! Looks like the big brother to the T11M78 300-500w Multi-Match mod 
transformer I have here. Right down to the nice plated acorn nuts. When 
you get ready to use it Brian, clean it up with a toothbrush and 
cleaner, then use some lemon oil on it. Makes the wrinkle paint look 
like new.


Seems a shame these things get hidden inside and seldom seen. Definitely 
from a time when craftsmanship ruled the day...


de Todd/'Boomer'  KA1KAQ




Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread David Knepper

  Thanks, Dennis.

  Dave, W3ST
  Secretary to the Collins Radio Association
  Publisher of the Collins Journal
  www.collinsra.com
  - Original Message -
  From: <[EMAIL PROTECTED]>
  To: "Discussion of AM Radio" 
  Sent: Tuesday, May 25, 2004 3:17 PM
  Subject: Re: [AMRadio] Thordarson Transformer ID


  > In a message dated 5/25/2004 11:42:51 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
  >
  > >
  > >   > Does it look similar to this one?
  > >   >
  > >   > http://www.arksky.org/temp/01080001.JPG
  > >   >
  >
  > Looks just like the Thordarson "CHT" in my 3-1000Z linear that I built
about 20 years ago.  My unit has small tabs on the secondary terminals
identifying the various output voltages. The secondary is 3000 volts CT with
taps at 1500, 2000 & 2500 V.  It has a dual primary allowing for 115 or 230
vac input.  Weighs at least 100 lbs.
  >
  > Dennis D.  W7QHO
  > Glendale, CA
  >
  > ___
  > AMRadio mailing list
  > AMRadio@mailman.qth.net
  > http://mailman.qth.net/mailman/listinfo/amradio



Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread W7QHO
In a message dated 5/25/2004 11:42:51 AM Eastern Daylight Time, [EMAIL 
PROTECTED] writes:

> 
>   > Does it look similar to this one?
>   >
>   > http://www.arksky.org/temp/01080001.JPG
>   >

Looks just like the Thordarson "CHT" in my 3-1000Z linear that I built about 20 
years ago.  My unit has small tabs on the secondary terminals identifying the 
various output voltages. The secondary is 3000 volts CT with taps at 1500, 2000 
& 2500 V.  It has a dual primary allowing for 115 or 230 vac input.  Weighs at 
least 100 lbs.

Dennis D.  W7QHO
Glendale, CA



Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread David Knepper

  That seems like the dimensions of mine.  Let me check this evening when I
go up to the Collins Radio Center.

  Thank you for all you assistance.

  Oh, one more thing, when do you suppose this transformer was manufactured?

  Dave, W3ST
  Secretary to the Collins Radio Association
  Publisher of the Collins Journal
  www.collinsra.com
  - Original Message -
  From: "B. Morgan Sherrod" <[EMAIL PROTECTED]>
  To: "Discussion of AM Radio" 
  Sent: Tuesday, May 25, 2004 12:54 PM
  Subject: Re: [AMRadio] Thordarson Transformer ID


  > - Original Message -
  > From: "David Knepper" <[EMAIL PROTECTED]>
  > To: "Discussion of AM Radio" 
  > Sent: Tuesday, May 25, 2004 10:42 AM
  > Subject: Re: [AMRadio] Thordarson Transformer ID
  >
  >
  > >   Yes, that is the exact physical size.
  > >   Any more particulars like size, etc.
  > >
  > >   I could probably match the size with the voltage output.
  > >
  >
  > This unit is a model T-15P2 1690 watts.  I can't find it in my old
catalog.  Also it is called a "Multi Volt" for
  > various outputs.  I also discovered it can run either 120 or 220 volts
by moving a tap on the primary side.  It is about
  > 12" long, 7.5" wide and 9" tall.  Probably weighs about 90 to 100 lbs.
Feels like more with my aching back.
  >
  > Preston Gaddis who originally owned the Bartlesville Kilowatt ran a pair
of 304TL's, among a few other varieties.
  > According to log entries, etc., his output was in the KW range, so I
suspect he ran around 2800 - 3000vdc on the plates
  > using this transformer.
  >
  > I thought I had the specs on this thing, but can't seem to remember
where I saw them.  Maybe someone on the list has
  > them.
  >
  > As mentioned by someone else, it would be easy enough to determine the
output with some test voltage, however the "Multi
  > Volt" taps might be difficult to decipher!
  >
  > Brian/w5ami
  >
  >
  >
  > ___
  > AMRadio mailing list
  > AMRadio@mailman.qth.net
  > http://mailman.qth.net/mailman/listinfo/amradio



Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread B. Morgan Sherrod
- Original Message - 
From: "David Knepper" <[EMAIL PROTECTED]>
To: "Discussion of AM Radio" 
Sent: Tuesday, May 25, 2004 10:42 AM
Subject: Re: [AMRadio] Thordarson Transformer ID


>   Yes, that is the exact physical size.
>   Any more particulars like size, etc.
>
>   I could probably match the size with the voltage output.
>

This unit is a model T-15P2 1690 watts.  I can't find it in my old catalog.  
Also it is called a "Multi Volt" for
various outputs.  I also discovered it can run either 120 or 220 volts by 
moving a tap on the primary side.  It is about
12" long, 7.5" wide and 9" tall.  Probably weighs about 90 to 100 lbs.  Feels 
like more with my aching back.

Preston Gaddis who originally owned the Bartlesville Kilowatt ran a pair of 
304TL's, among a few other varieties.
According to log entries, etc., his output was in the KW range, so I suspect he 
ran around 2800 - 3000vdc on the plates
using this transformer.

I thought I had the specs on this thing, but can't seem to remember where I saw 
them.  Maybe someone on the list has
them.

As mentioned by someone else, it would be easy enough to determine the output 
with some test voltage, however the "Multi
Volt" taps might be difficult to decipher!

Brian/w5ami





Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread Geoff/W5OMR



> Working for me...

Working now.
 
before, I just got a box, with a red 'x' in it...

oh, well

73 = Best Regards,
-Geoff/W5OMR



Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread David Knepper
  Yes, that is the exact physical size.
  Any more particulars like size, etc.

  I could probably match the size with the voltage output.

  Thank you.
  Dave, W3ST
  Secretary to the Collins Radio Association
  Publisher of the Collins Journal
  www.collinsra.com
  - Original Message -
  From: "B. Morgan Sherrod" <[EMAIL PROTECTED]>
  To: "AMRadio" 
  Sent: Tuesday, May 25, 2004 11:20 AM
  Subject: Re: [AMRadio] Thordarson Transformer ID


  > - Original Message -
  > From: "David Knepper" <[EMAIL PROTECTED]>
  > To: <[EMAIL PROTECTED]>; 
  > Sent: Monday, May 24, 2004 10:37 AM
  > Subject: [AMRadio] Thordarson Transformer ID
  >
  >
  > > I have a very large high voltage Thordarson transformer that appears
to be a PUV type.  There are no identification
  > labels, etc. but the original owner did identify it as a Thordarson.
  > >
  >
  > Does it look similar to this one?
  >
  > http://www.arksky.org/temp/01080001.JPG
  >
  > I forget the exact specs on this, however I know it is 120v primary and
the output is something like 3300vdc ct.  This
  > is the plate xfmr from the "Bartelsville Transmitter" I have.  I also
have a Thordarson catalog from the late 30's
  > packed up somewhere.  I'll see if I can find it.
  >
  > 73
  > Brian / w5ami
  >
  > ___
  > AMRadio mailing list
  > AMRadio@mailman.qth.net
  > http://mailman.qth.net/mailman/listinfo/amradio



Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread B. Morgan Sherrod
- Original Message - 
From: "B. Morgan Sherrod" <[EMAIL PROTECTED]>
To: "AMRadio" 
Sent: Tuesday, May 25, 2004 10:20 AM
Subject: Re: [AMRadio] Thordarson Transformer ID


> 
> I forget the exact specs on this, however I know it is 120v primary and the 
> output is something like 3300vdc ct.  

Correction.  3300 vac not vdc ;)

Brian


Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread B. Morgan Sherrod
Working for me...

- Original Message - 
From: "Geoff/W5OMR" <[EMAIL PROTECTED]>
To: "Discussion of AM Radio" 
Sent: Tuesday, May 25, 2004 10:23 AM
Subject: Re: [AMRadio] Thordarson Transformer ID


> > > I have a very large high voltage Thordarson transformer that appears to 
> > > be a
> PUV type.  There are no identification
> > labels, etc. but the original owner did identify it as a Thordarson.
> > >
> >
> > Does it look similar to this one?
> >
> > http://www.arksky.org/temp/01080001.JPG
> >
> > I forget the exact specs on this, however I know it is 120v primary and the
> output is something like 3300vdc ct.  This
> > is the plate xfmr from the "Bartelsville Transmitter" I have.  I also have a
> Thordarson catalog from the late 30's
> > packed up somewhere.  I'll see if I can find it.
> 
> No picture there, Brian...
> 
> I have some that I've taken, however - of the recent (past weekend) Belton
> Hamfest...
> 
> http://w5omr.shacknet.nu/~w5omr/hamstuff/belton-may-2004/
> 
> 73 = Best Regards,
> -Geoff/W5OMR
> 
> 
> ___
> AMRadio mailing list
> AMRadio@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/amradio


Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread Geoff/W5OMR
> > I have a very large high voltage Thordarson transformer that appears to be a
PUV type.  There are no identification
> labels, etc. but the original owner did identify it as a Thordarson.
> >
>
> Does it look similar to this one?
>
> http://www.arksky.org/temp/01080001.JPG
>
> I forget the exact specs on this, however I know it is 120v primary and the
output is something like 3300vdc ct.  This
> is the plate xfmr from the "Bartelsville Transmitter" I have.  I also have a
Thordarson catalog from the late 30's
> packed up somewhere.  I'll see if I can find it.

No picture there, Brian...

I have some that I've taken, however - of the recent (past weekend) Belton
Hamfest...

http://w5omr.shacknet.nu/~w5omr/hamstuff/belton-may-2004/

73 = Best Regards,
-Geoff/W5OMR




Re: [AMRadio] Thordarson Transformer ID

2004-05-25 Thread B. Morgan Sherrod
- Original Message - 
From: "David Knepper" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; 
Sent: Monday, May 24, 2004 10:37 AM
Subject: [AMRadio] Thordarson Transformer ID


> I have a very large high voltage Thordarson transformer that appears to be a 
> PUV type.  There are no identification
labels, etc. but the original owner did identify it as a Thordarson.
>

Does it look similar to this one?

http://www.arksky.org/temp/01080001.JPG

I forget the exact specs on this, however I know it is 120v primary and the 
output is something like 3300vdc ct.  This
is the plate xfmr from the "Bartelsville Transmitter" I have.  I also have a 
Thordarson catalog from the late 30's
packed up somewhere.  I'll see if I can find it.

73
Brian / w5ami