[amsat-bb] Re: Memories of OSCAR 10

2011-02-05 Thread Edward R. Cole
At 03:08 PM 2/5/2011, Bill Dzurilla wrote:
I've been enjoying the posts regarding our last HEO satellite, 
AO-40.  I was inactive while AO-40 was going strong, but the posts 
brought back memories of our first HEO, OSCAR 10, my first 
experience with satellites until a couple of years ago.  You can't 
find much about the glory days of AO-10 on the web, but I remember them well.

Passes lasted for 8 hours.  Always Q5 copy everywhere in the huge 
footprint, very little QRM or QRN.  I worked over 100 countries from 
1983-85, but never got enough cards for DXCC.  My rig was a Yaesu 
FT-726R with a Mirage D-1010 amp.  It was 70cm uplink, 2 meters 
downlink.  I attached the antennas to a small mast on my chimney.  I 
had a surplus cavity bandpass filter that wiped away all the 
birdies; it was needed because I lived in EL49 in New Orleans.  The 
antennas were small crossed-yagis (KLM?), circularly polarized, on 
separate booms.  I can't recall the make or model.  Also must have 
had a mast-mounted preamp and an az-el rotator, but I can't remember 
them.  I got the tracking info from a program that ran on my 
Commodore 64 and printed it out on my Gorilla Banana printer.

Those were halycon days, with AO-10 supposed to be just the 
beginning.  The grand plan was to put up 3 linked ham sats in 
geosynchronous orbit, which would enable any ham to work any other 
ham anywhere on the globe 24-7.  Will we ever see anything like that 
again?  How did AO-10 compare with AO-40?

There was a fire at my home and all my logs and QSL cards from those 
days were lost.  If anyone out there happens to have an old AO-10 
QSL card from me, I'd sure appreciate a copy.

73, Bill NZ5N



___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

AO-10 in the mid-1980's was my first real satellite operation (I had 
been involved with AO-6).  It was the basic mode-B linear 
transponder.  Great range and lots of DX.  I worked some rare DX that 
was rare on HF standards.  The hams I worked said they were tired of 
the pileups on HF and came up on AO-10 to enjoy some nice contacts.

P3E inherits the legacy of AO-10 and AO-13, as it is very similar in 
what it is equipped to do. ARISSat-1 will be a precurser for what P3E 
would be without the high orbit.



73, Ed - KL7UW, WD2XSH/45
==
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 144-1.4kw*, 432-100w*, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep dubus...@hotmail.com
==
*temp not in service 
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


[amsat-bb] Re: Memories of OSCAR 10

2011-02-05 Thread Joe v Murray
My My . all of these great memories of long ago makes me suggest 
I have to hark back to my first Q on a satellite.
That event that leaves you so high it takes a couple of day to join the
rest of the human race.
That Q was after designing and constructing a 2 meter SSB transverter,
preamp and antennas
Now it needs to be said that living in NE in 1965 and getting the bug to
accomplish this 
is with out elmers or help of commericial equipment .
I point that out because NE was the last state I needed to work WAS years
later
The HB 2 mtr preamp was a 7077 ceramic that was sweet as it could be.
The HB 2 mtr transverter was a 6360 tube that also was a marvel back
then.
Naturally I needed a SSB HF rig to drive the transverter and that was an
Hallicrafters HT-37
Oscar III had a 2 meter transponder with 50 KHz wide
The uplink was on 146 MHz and the down link was on 144 MHz .
During these day getting information about Ham satellite activity in NE
was almost impossible
We were able to learn the time and longitude that the bird was next
crossing the equator.
I took a school Globe,  seperated the two halves of the globe, set the
northern half
on a board so I could rotate the globe to a index on the board 
That index was aligned with the longitude of the next pass .
A wire also beginning at that index crossed over the globe to the correct
location on the other side
which represented the path about the globe for the bird.
String knots tied to the wire at each location equaling about ten minutes
flight represented time along the path.

All of this 1965 effort for a 18 day battery to run the Oscar III 2 Mtr
transponder.

Then the newer birds each in it's own time with all the learning and
enjoyment
Along came the French Mode S Arsene, as I recall there were 4 Hams in the
US that worked  that bird
Stations in FL , CA, NY and NE 
She was upside down and got to hot to last.  

Then the last HEO AO-40, 
Over 200 DXCC entities confirmed on satellite.
All but one zone (34) via satellite confirmed 
WAS # 109 

Enjoyment I have had plenty. 
I have also paid my share into the fund to build and launch AO-40 
It was not cheap if you want what I wanted.

The above makes me old with the old junk out in the shack
13 last Sept. a 40 minute , 108 MPH hail storm made 19 antennas in my
back yard useless.
My insurance Co has already spent over 50 grand on my place without
getting into any Ham antennas.
I am not sure I will match Dave or Dan's ability to wait for P3E and
rebuild my earth station.

I suggest that this is not one of those Build it and they will come

Time will tell !

Joe Murray K0VTY
Amsat 860
 
On Sat, 05 Feb 2011 15:40:46 -0900 Edward R. Cole kl...@acsalaska.net
writes:
 At 03:08 PM 2/5/2011, Bill Dzurilla wrote:
 I've been enjoying the posts regarding our last HEO satellite, 
 AO-40.  I was inactive while AO-40 was going strong, but the posts 
 
 brought back memories of our first HEO, OSCAR 10, my first 
 experience with satellites until a couple of years ago.  You can't 
 
 find much about the glory days of AO-10 on the web, but I remember 
 them well.
 
 Passes lasted for 8 hours.  Always Q5 copy everywhere in the huge 
 footprint, very little QRM or QRN.  I worked over 100 countries 
 from 
 1983-85, but never got enough cards for DXCC.  My rig was a Yaesu 
 FT-726R with a Mirage D-1010 amp.  It was 70cm uplink, 2 meters 
 downlink.  I attached the antennas to a small mast on my chimney.  
 I 
 had a surplus cavity bandpass filter that wiped away all the 
 birdies; it was needed because I lived in EL49 in New Orleans.  The 
 
 antennas were small crossed-yagis (KLM?), circularly polarized, on 
 
 separate booms.  I can't recall the make or model.  Also must have 
 
 had a mast-mounted preamp and an az-el rotator, but I can't 
 remember 
 them.  I got the tracking info from a program that ran on my 
 Commodore 64 and printed it out on my Gorilla Banana printer.
 
 Those were halycon days, with AO-10 supposed to be just the 
 beginning.  The grand plan was to put up 3 linked ham sats in 
 geosynchronous orbit, which would enable any ham to work any other 
 
 ham anywhere on the globe 24-7.  Will we ever see anything like 
 that 
 again?  How did AO-10 compare with AO-40?
 
 There was a fire at my home and all my logs and QSL cards from 
 those 
 days were lost.  If anyone out there happens to have an old AO-10 
 QSL card from me, I'd sure appreciate a copy.
 
 73, Bill NZ5N
 
 
 
 ___
 Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the 
 author.
 Not an AMSAT-NA member? Join now to support the amateur satellite 
 program!
 Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
 
 AO-10 in the mid-1980's was my first real satellite operation (I had 
 
 been involved with AO-6).  It was the basic mode-B linear 
 transponder.  Great range and lots of DX.  I worked some rare DX 
 that 
 was rare on HF standards.  The hams I worked said they