[amsat-bb] Re: TS2000 on dualband antenna (for sat work)
yes work with disconne antenna and good LMR-400 or LMR-600 Raul CE3SOC - Original Message - From: John Geiger aa...@yahoo.com To: amsat-bb@amsat.org Sent: Wednesday, June 09, 2010 11:46 AM Subject: [amsat-bb] TS2000 on dualband antenna (for sat work) Has anyone on the list tried using a Kenwood TS2000 on full duplex satellite operatation using a dualband VHF/UHF antenna and a diplexer? Is it possible or is there too much desensitization thru the diplexer to make full duplex work? 73s John AA5JG ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
[amsat-bb] Re: TS2000 on dualband antenna (for sat work)
Thanks David ! My vertical did not pick up AO51 at all, so the experiment could not be done here. Using my beams all was fine of course. Funny, I knew this stacked vertical dual band only picks up signals at low elevation (10 degrees), at many cubesats (70cm) and ISS (2 mtrs). But I never experienced only very noisy signals like this morning from AO51. Nothing wrong with AO51, maybe with my vertical. Anyway - was a good trigger to be on AO51 again, made 1 QSO and listened to many other European stations making contacts. The antenna set-up: http://www.pa3guo.com/ant_jun_2008.jpg 73, Henk, PA3GUO It works fine. Used a TS2000E via a MX2000 tri-plexer to a co-linear both u/v and v/u with no problems. Worked the States and Canada this way via F0-29. Also used a Create CLP5130 log periodic connected in the same way. Just keep the TX power as low as is needed to hear your own signal and no more. David G8OQW -Original Message- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of PA3GUO Sent: 09 June 2010 20:36 To: amsat-bb@amsat.org Subject: [amsat-bb] Re: TS2000 on dualband antenna (for sat work) Hi John Let me try tomorrow and report back, I have never tested this. Henk, PA3GUO Has anyone on the list tried using a Kenwood TS2000 on full duplex satellite operatation using a dualband VHF/UHF antenna and a diplexer? Is it possible or is there too much desensitization thru the diplexer to make full duplex work? 73s John AA5JG ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb -- Henk, PA3GUO ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
[amsat-bb] Re: TS2000 on dualband antenna (for sat work)
Hi John Let me try tomorrow and report back, I have never tested this. Henk, PA3GUO Has anyone on the list tried using a Kenwood TS2000 on full duplex satellite operatation using a dualband VHF/UHF antenna and a diplexer? Is it possible or is there too much desensitization thru the diplexer to make full duplex work? 73s John AA5JG ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
[amsat-bb] Re: TS2000 on dualband antenna (for sat work)
There's probably less desence than using two antennas without diplexers/filters. On 09-Jun-10 19:36, PA3GUO wrote: Hi John Let me try tomorrow and report back, I have never tested this. Henk, PA3GUO Has anyone on the list tried using a Kenwood TS2000 on full duplex satellite operatation using a dualband VHF/UHF antenna and a diplexer? Is it possible or is there too much desensitization thru the diplexer to make full duplex work? 73s John AA5JG ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
[amsat-bb] Re: TS2000 on dualband antenna (for sat work)
It works fine. Used a TS2000E via a MX2000 tri-plexer to a co-linear both u/v and v/u with no problems. Worked the States and Canada this way via F0-29. Also used a Create CLP5130 log periodic connected in the same way. Just keep the TX power as low as is needed to hear your own signal and no more. David G8OQW -Original Message- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of PA3GUO Sent: 09 June 2010 20:36 To: amsat-bb@amsat.org Subject: [amsat-bb] Re: TS2000 on dualband antenna (for sat work) Hi John Let me try tomorrow and report back, I have never tested this. Henk, PA3GUO Has anyone on the list tried using a Kenwood TS2000 on full duplex satellite operatation using a dualband VHF/UHF antenna and a diplexer? Is it possible or is there too much desensitization thru the diplexer to make full duplex work? 73s John AA5JG ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb