Re: [amsat-bb] satpc32 problems

[Thomas Doyle]

Hi Bob,

The question raised by you and others reminded me of a simple little
program I wrote a couple of years ago and never released. Ashamed to say
that I gave into PITA when I could not figure out the link between a Group
and its associated tle data file (perhaps there is no external link). The
program seems to work but was abandoned when I gave up and decided to write
my own tracker. I am sure there are many other similar programs out there
but if you do not have one this might help. Please keep your computer on
the desk and far away from the window.

http://www.tomdoyle.org/satpc32checker

If you try this program and it works for you contact me. If you have
problems with it contact Bob :-)

73 W9KE Tom Doyle


On Thu, Jun 5, 2014 at 9:58 PM, Bob- W7LRD  wrote:

> Still attempting to make satpc32 work.  Removed it from hard drive,
> downloaded from Erics site, now get error 1925 not sufficient privileges
> etc etc.  The next sound you hear will be the computer flying out the
> window.  Assistance please.
> from the digitally challanged
> 73 Bob W7LRD
> ___
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>



-- 

Sent from my computer.

tom ...
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] satpc32 problems

[Erich Eichmann]

Bob,
run the setup program "as administrator" even if you are the administrator.

There is a link on my website directly above the links that download  
the installation ZIP files:


Read this before you dowload one of the files, please 



Section B 1 d of the text says:
d. The folder also contains the setup program. Start it by double 
clicking on the filename.


_IMPORTANT: Under Vista and Windows 7 right click on the filename and 
from the menu that opens choose "Run as administrator".

_

73s, Erich, DK1TB




Am 06.06.2014 04:58, schrieb Bob- W7LRD:

Still attempting to make satpc32 work.  Removed it from hard drive, downloaded 
from Erics site, now get error 1925 not sufficient privileges etc etc.  The 
next sound you hear will be the computer flying out the window.  Assistance 
please.
from the digitally challanged
73 Bob W7LRD
___
Sent viaamsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings:http://amsat.org/mailman/listinfo/amsat-bb


___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 problems

[Bob- W7LRD]

Still attempting to make satpc32 work.  Removed it from hard drive, downloaded 
from Erics site, now get error 1925 not sufficient privileges etc etc.  The 
next sound you hear will be the computer flying out the window.  Assistance 
please. 
from the digitally challanged 
73 Bob W7LRD    
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Problems Connecting to TS2000

[Richard Lawn]

I've had intermittent problems with connecting SatPC32 to my TS2000 via
CAT. I finally determined I thought that the Keyspan 4-port USB-Serial hub
was the problem. I've had problems with it in the past so this wasn't a
surprise. I dug out another single Keyspan USB-serial converter, plugged it
in, had to reset the Com port to something higher (17) and tested it first
with Ham Radio Deluxe. Whalla it worked connecting at 57600 baud rate. But
I try to connect to the radio using the same parameters in SatPC32 and no
dice. It tells me that com 17 isn't available. What am I missing. I am
using VSP and could it be that I need to set up a pair. The ultimate goal
is to control both the TS2000 for uplink and my Flex5KA with downconverters
with SatPC32. It worked just fine including the Keyspan hub with my FT847
but not with the Kenwood. What am I missing?

Rick
W2JAZ
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 problems

[Bob- W7LRD]

I had to reinstall satpc32.  first  problem 

..could not open com port 3 

   then no source file found for group standard 

    still getting the error 105 marching across the screen 

thanks from the digitally challanged 

73 Bob W7LRD 


___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb