Re: [arch-general] cd/dvd burning software
Recently a friend asked me to compile and burn a few of his favourite songs to CDs to keep in his hot rod. worked out to 120 tracks on 4 CDs. That was easy enough to do with brasero or xfburn but neither of them even allow me to directly print the song list or even copy it to the clipboard. The only way to get the list was 'screenshot' the file list to the clipboard, open libreoffice and create a page template, paste the lists into it and print that. mick in Glen Innes 2370 On Thu, 22 Oct 2020 at 08:30, mick howe wrote: > > I didn't make myself clear, there are plenty of adequate programs to > author and burn the disc out there but everything seems to go out of > its way to make printing a file list to go with the disc a massive > chore, I mean how hard would it be to make the printable file list? > > mick in glen innes 2370 > > On Wed, 21 Oct 2020 at 14:21, Javier via arch-general > wrote: > > > > On 10/20/20 8:27 PM, mick howe via arch-general wrote: > > > I'm chasing a simple program to burn CD/DVD and print a simple, plain > > > text file list prefer to fit the disc case > > > > > > mick in glen innes 2370 > > > > cdrecord from cdrtools does the job on the command line. > > > > -- > > Javier > >
Re: [arch-general] cd/dvd burning software
I didn't make myself clear, there are plenty of adequate programs to author and burn the disc out there but everything seems to go out of its way to make printing a file list to go with the disc a massive chore, I mean how hard would it be to make the printable file list? mick in glen innes 2370 On Wed, 21 Oct 2020 at 14:21, Javier via arch-general wrote: > > On 10/20/20 8:27 PM, mick howe via arch-general wrote: > > I'm chasing a simple program to burn CD/DVD and print a simple, plain > > text file list prefer to fit the disc case > > > > mick in glen innes 2370 > > cdrecord from cdrtools does the job on the command line. > > -- > Javier >
[arch-general] cd/dvd burning software
I'm chasing a simple program to burn CD/DVD and print a simple, plain text file list prefer to fit the disc case mick in glen innes 2370
Re: [arch-general] Telinit?
ArchLinux devs found a much more convoluted, obfuscated method of starting the system and setting it up "read to use". Goes with unreadable logs, etc My recollection was that telinit was a mechanism to tell init to change run level such as change from run level 3 (to put it crudely - normal running mode) to run level 6 (civilised, orderly shutdown and power off). It's been many years since I cut my teeth on Red Hat 5.2. On Sun, 16 Aug 2020 at 17:25, wrote: > David Rosenstrauch wrote: > > > Anyone know what happened to the "telinit" shortcut? It used to be > > included in systemd-sysvcompat > > (https://wiki.archlinux.org/index.php/Systemd#systemd-sysvcompat) but > > seems like it recently got removed. Was it removed upstream? (And if > > so, anyone know why?) > > > > Thanks, > > > > DR > > What I know is: > 1. Qouting systemd(1) > >For compatibility with SysV, if the binary is called >as init and is not the first process on the machine >(PID is not 1), it will execute telinit and pass all >command line arguments unmodified. That means init and >telinit are mostly equivalent when invoked from normal >login sessions. See telinit(8) for more information. > > 2. systemd package has a telinit manual page. > > I can only speculate about the answers to your other questions. >
Re: [arch-general] (no subject)
you have rebooted since update? Every time updates generate a new startup? file I lose network, printing and usb until I do a reboot. Just what you need when doing a backup to a slow usb drive mick in glen innes 2370 On Tue, 24 Mar 2020 at 18:32, Robin Martijn wrote: > I see that I made a mistake in the mail subject. My apologies for that. > > Thanks a lot Justin! My port is open in the bios and firmware. My USB > keyboard and mouse do get recognized. > > When I run `ls -ld /usr/lib/modules/5.5.11-arch1-1`, I get the following > result: > > `drwxr-xr-x 4 root root 4096 Mar 24 15:26 /usr/lib/modules/5.5.11-arch1-1` > > To me, that looks like a good result. The folder is filled with what I > would expect in such a file. > > The USB controller is recognized correctly by `lspci`, but that probably > isn't very unexpected since my USB keyboard and mouse are functioning. > > Thank you very much for thinking with me! > > On 3/24/20 7:25 PM, Justin Capella via arch-general wrote: > > Have you looked at lsusb -t ? Maybe the port is disabled in your > > bios/firmware? Verify that you are booting a kernel you have (modules > for) > > ls -ld /usr/lib/modules/`uname -r` check which usb controllers you have, > > lspci, they will be *hci > > > > On Tue, Mar 24, 2020, 11:00 AM Robin Martijn wrote: > > > >> Currently, I am using linux 5.5.11.arch1-1. Since this version, I am > >> unable to use my USB storage drives. Nothing shows up in dmesg when > >> inserting the storage drive and also lsblk does not detect the drive. > >> lsusb also does not detect the drive. I have rebooted my system after > >> the kernel update, more than once actually, so I am sure that that is > >> not the problem. Would anybody know what could potentially be the > problem? > >> > >> Thanks in advance! > >> >
Re: [arch-general] Got a problem with networking.
Originally using the same account name/password on all systems but after latest network issues started I changed passwords on win7 and arch. Made some impact: arch to desktop win10 now works, Laptop to mapped arch directory works, Arch to laptop win10 no, win10 desk to laptop no, win10 lap to win10 desk no Need to work out how to use wireshark/tcpdump when I can think again
[arch-general] Got a problem with networking.
Systems: Arch / xfce on my main system ( I5, 32gb, 2 + 1tb) I3 laptop 12gb, 1TB lenovo B50-70 dual booting, originally win8.1 & arch, when I upgraded to win10 I broke my arch installation and replaced it with kubuntu because I couldn't face over a week of recreating the arch system. (Ever since I started using Linux Red Hat 5.2 I have only ever been able restore the directories and file names, but not the contents. win7 desktop 4gb, 320GB Before upgrading to to win10 networking broke with each update to networking on either arch or windoze usually one system or the other or both were unable to see each other. I was able to fix it, usually it seemed all had to do was touch the samba config file. After I added the win7 box I was able to see all system from each box and sometimes copy files. From the win7 box I could copy files from any box to any box. Since I "updated" win7 to win10 I can see but NOT connect between any of the boxes and have had to resort to sneekernet for file transfers. I have tried numerous times to find the cause and fix it but I'm just going round and round in circles, getting nowhere. Is there anyone out in the ether land who could guide me through this issue?
Re: [arch-general] pacman has nothing to do last 5 days
> > This seems weird, what mirror are you using? Maybe the mirror is broken > and you need to update your mirrorlist. > Updated mirrorlist to 2019-10-01 and selected all australian mirrors and then had to disable arnet, now all goodish > P.S. STOP using -Syyuu, since the double y tells pacman to force > download databases even when the server says there is no update, and the > double u tells pacman to downgrade any packages the server claims are old. noted and done > If you used a plain old -Syu, then you would almost certainly see five > days worth of "[repository] is already up to date", which would be a > definite red flag that something is wrong. Now that you used -Syyuu, we > have no idea whether your pacman installation refreshed the databases > because the server said they needed to be refreshed or because you told > pacman to ignore the freshness. > Been using Syyuu almost since I started using Arch, first time I noticed > any badness with pacman thanks
[arch-general] pacman has nothing to do last 5 days
For the last five days or so it reports nothing to do:- [mick@cave ~]$ pacman -Syyuu :: Synchronizing package databases... core 135.1 KiB 938 KiB/s 00:00 [##] 100% extra1647.8 KiB 2.68 MiB/s 00:01 [##] 100% community 4.7 MiB 2.66 MiB/s 00:02 [##] 100% multilib 164.2 KiB 2.97 MiB/s 00:00 [##] 100% :: Starting full system upgrade... there is nothing to do [mick@cave ~]$ This is the first time in around 10 years of running Arch this has happened, has some thing changed in pacman that I missed?
Re: [arch-general] Maria update
did that 7 phases earlier here is the FULL output from that command string systemctl restart mariadb.service && mariadb-upgrade -u root -p Enter password: Phase 1/7: Checking and upgrading mysql database Processing databases mysql mysql.column_stats OK mysql.columns_priv OK mysql.db OK mysql.eventOK mysql.func OK mysql.gtid_slave_pos OK mysql.help_categoryOK mysql.help_keyword OK mysql.help_relationOK mysql.help_topic OK mysql.host OK mysql.index_stats OK mysql.innodb_index_stats OK mysql.innodb_table_stats OK mysql.plugin OK mysql.proc OK mysql.procs_priv OK mysql.proxies_priv OK mysql.roles_mappingOK mysql.servers OK mysql.table_stats OK mysql.tables_priv OK mysql.time_zoneOK mysql.time_zone_leap_secondOK mysql.time_zone_name OK mysql.time_zone_transition OK mysql.time_zone_transition_typeOK mysql.transaction_registry OK mysql.user OK Phase 2/7: Installing used storage engines... Skipped Phase 3/7: Fixing views Phase 4/7: Running 'mysql_fix_privilege_tables' Phase 5/7: Fixing table and database names Phase 6/7: Checking and upgrading tables Processing databases information_schema performance_schema webtrees webtrees.wt_block OK webtrees.wt_block_setting OK webtrees.wt_change OK webtrees.wt_dates OK webtrees.wt_default_resn OK webtrees.wt_families OK webtrees.wt_favorite OK webtrees.wt_gedcom OK webtrees.wt_gedcom_chunk OK webtrees.wt_gedcom_setting OK webtrees.wt_hit_counterOK webtrees.wt_individualsOK webtrees.wt_link OK webtrees.wt_logOK webtrees.wt_media OK webtrees.wt_messageOK webtrees.wt_module OK webtrees.wt_module_privacy OK webtrees.wt_module_setting OK webtrees.wt_name OK webtrees.wt_news OK webtrees.wt_next_idOK webtrees.wt_other OK webtrees.wt_placelinks OK webtrees.wt_placelocation OK webtrees.wt_places OK webtrees.wt_sessionOK webtrees.wt_site_access_rule OK webtrees.wt_site_setting OK webtrees.wt_sourcesOK webtrees.wt_user OK webtrees.wt_user_gedcom_settingOK webtrees.wt_user_setting OK Phase 7/7: Running 'FLUSH PRIVILEGES' OK Could not create the upgrade info file '/var/lib/mysql/mysql_upgrade_info' in the MariaDB Servers datadir, errno: 13 On Fri, 28 Jun 2019 at 01:14, Emil Lundberg wrote: > Maybe this? > > > https://www.archlinux.org/news/mariadb-104x-update-requires-manual-intervention/ > > /Emil > > On Fri, 28 Jun 2019, 03:10 mick howe via arch-general, < > arch-general@archlinux.org> wrote: > >> this mornings update of mariadb failed with this error:- >> Phase 7/7: Running 'FLUSH PRIVILEGES' >> OK >> Could not create the upgrade info file '/var/lib/mysql/mysql_upgrade_info' >> in the MariaDB Servers datadir, errno: 13 >> >> what does it mean and how do I fix it >> >> mick, freezing in glen innes >> >
[arch-general] Maria update
this mornings update of mariadb failed with this error:- Phase 7/7: Running 'FLUSH PRIVILEGES' OK Could not create the upgrade info file '/var/lib/mysql/mysql_upgrade_info' in the MariaDB Servers datadir, errno: 13 what does it mean and how do I fix it mick, freezing in glen innes
Re: [arch-general] broken package stops pacstrap
waddled of to the ArchLinux32 site a grabbed their latest .iso, installation is progressing mick in glen innes On 28 July 2017 at 01:42, Eli Schwartz <eschwa...@archlinux.org> wrote: > On 07/27/2017 08:21 PM, mick howe via arch-general wrote: > > Trying to install arch i686 on my IBM x345 using 2015 07 install media > (yes > > I know its 2 years old). Get as far as running pacstrap and it comes to a > > crashing halt on checking package integrity > > > > error: krb5 : signature from "Levente Polyak (anthraxx) > > leve...@leventepolyak.net> " is unknown trust > > :: File /mnt/var/cache/pacman/pkg/krb5-1.15.1-1-i686.pkg.tar.xz is > > corrupted (invalid or corrupted package PGP signature)). > > > > How can I get past this crash > > That's not a broken package, that is a PGP signature verification error. > I'd say to run pacman with the --debug flag (pacstrap will pass it on to > pacman for you), except the problem is fairly obvious -- the > archlinux-keyring package has been updated a number of times since that > ISO. > > I suggest you use the current, up-to-date ISO built and hosted on > https://archlinux32.org which is where the official/affiliated efforts > to preserve i686 are being held. Two of the Arch Devs/TUs (Bartłomiej > Piotrowski and Balló György) are involved with the project, and once > official support for i686 is dropped at the end of the year, you will > need to migrate to archlinux32 anyway. > > Note that we are optimistic that archlinux32 can receive official > recognition as a tier-two architecture and thus remain affiliated with > archlinux.org itself. :) > > ... > > Regardless, the 2-year-old ISO will not work. You need an ISO which has > pacman 5 on it, in order to have pacman hooks run. These hooks are > important for several reasons, including the fact that they are used to > generate an initramfs and therefore allow you to boot into your > installation. :) > > The earliest archlinux.org archiso that will work for you is the March > 2016 one, and even then you will have to update the archlinux-keyring > package on its own in order to fix keys that expired and were renewed or > replaced in the two years since your ISO. > > -- > Eli Schwartz > >
[arch-general] broken package stops pacstrap
Trying to install arch i686 on my IBM x345 using 2015 07 install media (yes I know its 2 years old). Get as far as running pacstrap and it comes to a crashing halt on checking package integrity error: krb5 : signature from "Levente Polyak (anthraxx) leve...@leventepolyak.net> " is unknown trust :: File /mnt/var/cache/pacman/pkg/krb5-1.15.1-1-i686.pkg.tar.xz is corrupted (invalid or corrupted package PGP signature)). How can I get past this crash mick in glen innes
Re: [arch-general] manually configure network
thank you, I now can make sense of most of what to do. DNS isn't working if I try to go through the new modem but that is an issue with the ISP and configuring the modem once I get the password for the account. On 13 July 2017 at 03:43, Rich <rich-m...@octoxol.com> wrote: > > > On 07/12/2017 10:29 PM, mick howe via arch-general wrote: > >> On 13 July 2017 at 01:17, Mrrob <r...@mrrob.info> wrote: >> >> On 13/07/17 07:09, mick howe via arch-general wrote: >>> >>> I've just changed ISP and I can't get the changed configuration to stick. >>>> >>>> I'm using 'static IP address - manual assignment' from Network >>>> configuration wiki page. >>>> >>>> I need to change my address from 192.168.1.0/24 to 192.168.20.1/24. >>>> >>>> using iproute2 tools as per wiki I can get everything working UNTIL I >>>> reboot, at which time some of the settings show the old values and >>>> others >>>> the new. >>>> >>>> I've been manually configuring these settings without problems since I >>>> started using linux in 1994. >>>> >>>> >>>> >>>> I assume that (as well as changing ISPs) you have changed your router >>> and >>> it has a different internal range to the old one. >>> >>> Correct, and the ISP failed to include modem password in the box. >> >> >> >>> If you have an IP address automatically after booting then something is >>> bringing up the network automatically. Assuming your Arch install is >>> newer >>> than 2013 then I would expect you've configured netctl to manage the >>> interface. >>> >>> I had to reinstal when I moved in April 2013, would have used the >> simplest >> manual method >> >> >> >> Look in /etc/netctl >>> >>> [mick@cave ~]$ ls -aR /etc/netctl/etc/netctl: >> . .. examples hooks interfaces >> >> /etc/netctl/examples: >>> . ethernet-static tunnel wireless-wpa >>> ..macvlan-dhcp tuntap wireless-wpa-config >>> bonding macvlan-static vlan-dhcp wireless-wpa-configsection >>> bridgemobile_ppp vlan-staticwireless-wpa-static >>> ethernet-custom openvswitch wireless-open >>> ethernet-dhcp >>> >>> pppoe >>> >>> wireless-wep >>> >>> /etc/netctl/hooks: >>> . .. >>> >>> /etc/netctl/interfaces: >>> . .. >>> >>> >> >> >> and >>> >>> $ systemctl list-unit-files --state=enabled >>> >>> [mick@cave ~]$ systemctl list-unit-files --state=enabled >>> >> UNIT FILE STATE >> org.cups.cupsd.path enabled >> autovt@.service enabled >> dbus-org.freedesktop.network1.service enabled >> dbus-org.freedesktop.resolve1.service enabled >> display-manager.service enabled >> getty@.serviceenabled >> httpd.service enabled >> lxdm.service enabled >> nmbd.service enabled >> openntpd.service enabled >> org.cups.cupsd.serviceenabled >> postgresql.serviceenabled >> smbd.service enabled >> systemd-networkd.service enabled >> systemd-resolved.service enabled >> org.cups.cupsd.socket enabled >> systemd-networkd.socket enabled >> remote-fs.target enabled >> >> 18 unit files listed. >> lines 1-21 >> is blahbluhblahnetwork1.service the guilty party or is it >> systemd-networkd.service? >> >> what am I looking for in these? >> >> >> This is the wiki page for the network manager you are using: > systemd-networkd https://wiki.archlinux.org/index.php/Systemd-networkd > > --Rich >
Re: [arch-general] manually configure network
On 13 July 2017 at 03:14, Richwrote: > You are probably using dhcpcd. This is what is installed when initially > setting up the OS. Depending on exactly what settings are being reverted to > default it may be normal behavior. What you need to do is find out exactly > which network manager you are using and exactly what settings are not > sticking across a reboot. The fix is probably not difficult but need more > info to be able to make intelligent suggestions. I had a problem with > dhcpcd reverting my DNS servers to the ISP defaults on every restart. > > --Rich > I tried it when I first started with linux in 1994 and now avoid it like the plague, I'd rather do it manually. It was simple until somebody decided I need a string of cascading daemons to do everything. mick stressed out and frustrated in frozen glen innes
Re: [arch-general] manually configure network
On 13 July 2017 at 03:14, Rich <rich-m...@octoxol.com> wrote: > > > On 07/12/2017 09:58 PM, mick howe via arch-general wrote: > >> On 13 July 2017 at 01:17, Mrrob <r...@mrrob.info> wrote: >> >> On 13/07/17 07:09, mick howe via arch-general wrote: >>> >>> I've just changed ISP and I can't get the changed configuration to stick. >>>> >>>> I'm using 'static IP address - manual assignment' from Network >>>> configuration wiki page. >>>> >>>> I need to change my address from 192.168.1.0/24 to 192.168.20.1/24. >>>> >>>> using iproute2 tools as per wiki I can get everything working UNTIL I >>>> reboot, at which time some of the settings show the old values and >>>> others >>>> the new. >>>> >>>> I've been manually configuring these settings without problems since I >>>> started using linux in 1994. >>>> >>>> >>>> >>>> I assume that (as well as changing ISPs) you have changed your router >>> and >>> it has a different internal range to the old one. >>> >>> >> Correct >> >> >> >>> If you have an IP address automatically after booting then something is >>> bringing up the network automatically. Assuming your Arch install is >>> newer >>> than 2013 then I would expect you've configured netctl to manage the >>> interface. >>> >>> >> About april 2013 >> , can't remember details of what I did then but I would have used what >> was >> most like the the original method. >> >> >>> Look in /etc/netctl >>> >>> [mick@cave ~]$ ls -aR /etc/netctl >> /etc/netctl: >> . .. examples hooks interfaces >> >> /etc/netctl/examples: >> .ethernet-static tunnel wireless-wpa >> .. macvlan-dhcptuntapwireless-wpa-config >> >> bonding macvlan-static vlan-dhcp >> wireless-wpa-configsection >> bridge mobile_ppp vlan-staticwireless-wpa-static >> ethernet-custom openvswitch wireless-open >> ethernet-dhcppppoewireless-wep >> >> /etc/netctl/hooks: >> . .. >> >> /etc/netctl/interfaces: >> . .. >> >> >>> and >>> >>> $ systemctl list-unit-files --state=enabled >>> >>> --- >>> mrrob >>> --- >>> >>> >> >> You are probably using dhcpcd. This is what is installed when initially > setting up the OS. Depending on exactly what settings are being reverted to > default it may be normal behavior. What you need to do is find out exactly > which network manager you are using and exactly what settings are not > sticking across a reboot. The fix is probably not difficult but need more > info to be able to make intelligent suggestions. I had a problem with > dhcpcd reverting my DNS servers to the ISP defaults on every restart. > > --Rich >
Re: [arch-general] manually configure network
On 13 July 2017 at 01:17, Mrrob <r...@mrrob.info> wrote: > On 13/07/17 07:09, mick howe via arch-general wrote: > >> I've just changed ISP and I can't get the changed configuration to stick. >> >> I'm using 'static IP address - manual assignment' from Network >> configuration wiki page. >> >> I need to change my address from 192.168.1.0/24 to 192.168.20.1/24. >> >> using iproute2 tools as per wiki I can get everything working UNTIL I >> reboot, at which time some of the settings show the old values and others >> the new. >> >> I've been manually configuring these settings without problems since I >> started using linux in 1994. >> >> >> > I assume that (as well as changing ISPs) you have changed your router and > it has a different internal range to the old one. > Correct, and the ISP failed to include modem password in the box. > > If you have an IP address automatically after booting then something is > bringing up the network automatically. Assuming your Arch install is newer > than 2013 then I would expect you've configured netctl to manage the > interface. > I had to reinstal when I moved in April 2013, would have used the simplest manual method > Look in /etc/netctl > [mick@cave ~]$ ls -aR /etc/netctl/etc/netctl: . .. examples hooks interfaces > /etc/netctl/examples: > . ethernet-static tunnel wireless-wpa > ..macvlan-dhcp tuntap wireless-wpa-config > bonding macvlan-static vlan-dhcp wireless-wpa-configsection > bridgemobile_ppp vlan-staticwireless-wpa-static > ethernet-custom openvswitch wireless-open > ethernet-dhcp > > pppoe > > wireless-wep > > /etc/netctl/hooks: > . .. > > /etc/netctl/interfaces: > . .. > > and > > $ systemctl list-unit-files --state=enabled > > [mick@cave ~]$ systemctl list-unit-files --state=enabled UNIT FILE STATE org.cups.cupsd.path enabled autovt@.service enabled dbus-org.freedesktop.network1.service enabled dbus-org.freedesktop.resolve1.service enabled display-manager.service enabled getty@.serviceenabled httpd.service enabled lxdm.service enabled nmbd.service enabled openntpd.service enabled org.cups.cupsd.serviceenabled postgresql.serviceenabled smbd.service enabled systemd-networkd.service enabled systemd-resolved.service enabled org.cups.cupsd.socket enabled systemd-networkd.socket enabled remote-fs.target enabled 18 unit files listed. lines 1-21 is blahbluhblahnetwork1.service the guilty party or is it systemd-networkd.service? what am I looking for in these?
Re: [arch-general] manually configure network
On 13 July 2017 at 01:17, Mrrob <r...@mrrob.info> wrote: > On 13/07/17 07:09, mick howe via arch-general wrote: > >> I've just changed ISP and I can't get the changed configuration to stick. >> >> I'm using 'static IP address - manual assignment' from Network >> configuration wiki page. >> >> I need to change my address from 192.168.1.0/24 to 192.168.20.1/24. >> >> using iproute2 tools as per wiki I can get everything working UNTIL I >> reboot, at which time some of the settings show the old values and others >> the new. >> >> I've been manually configuring these settings without problems since I >> started using linux in 1994. >> >> >> > I assume that (as well as changing ISPs) you have changed your router and > it has a different internal range to the old one. > Correct > > If you have an IP address automatically after booting then something is > bringing up the network automatically. Assuming your Arch install is newer > than 2013 then I would expect you've configured netctl to manage the > interface. > About april 2013 , can't remember details of what I did then but I would have used what was most like the the original method. > > Look in /etc/netctl > [mick@cave ~]$ ls -aR /etc/netctl /etc/netctl: . .. examples hooks interfaces /etc/netctl/examples: .ethernet-static tunnel wireless-wpa .. macvlan-dhcptuntapwireless-wpa-config bonding macvlan-static vlan-dhcp wireless-wpa-configsection bridge mobile_ppp vlan-staticwireless-wpa-static ethernet-custom openvswitch wireless-open ethernet-dhcppppoewireless-wep /etc/netctl/hooks: . .. /etc/netctl/interfaces: . .. > > and > > $ systemctl list-unit-files --state=enabled > > --- > mrrob > --- >
[arch-general] manually configure network
I've just changed ISP and I can't get the changed configuration to stick. I'm using 'static IP address - manual assignment' from Network configuration wiki page. I need to change my address from 192.168.1.0/24 to 192.168.20.1/24. using iproute2 tools as per wiki I can get everything working UNTIL I reboot, at which time some of the settings show the old values and others the new. I've been manually configuring these settings without problems since I started using linux in 1994.