Re: [arch-general] Intel AG 4965
Flavio Costa wrote: Maybe the output of NetworkManager's log would be helpful too. Try # tail -f /var/log/messages while connecting to a wireless connection. On Thu, Oct 15, 2009 at 8:28 PM, Alan Hoffmeister alan...@gmail.com wrote: Hello guyz! First of all, let me introduce. My name is Alan Hoffmeister, I'm from Brazil and I'm a new user to Archlinux. I sucefully installed Arch and XFCE4 on my notebook (by the way, awesome performance compared to Win7), my wired network is connecting Ok, I'm using networkmanager to manage my connections... The nm-applet can see all SSIDs around my notebook, it ask me some password, but when it try to get an IP it fails... I had this problem whit wicd too.. Always failing to get an IP.. Here is my rc.conf: # Start ### # # /etc/rc.conf - Main Configuration for Arch Linux # # --- # LOCALIZATION # --- # # LOCALE: available languages can be listed with the 'locale -a' command # HARDWARECLOCK: set to UTC or localtime # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock # TIMEZONE: timezones are found in /usr/share/zoneinfo # KEYMAP: keymaps are found in /usr/share/kbd/keymaps # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US) # CONSOLEMAP: found in /usr/share/kbd/consoletrans # USECOLOR: use ANSI color sequences in startup messages # LOCALE=pt_BR.utf8 HARDWARECLOCK= USEDIRECTISA=no TIMEZONE=America/Sao_Paulo KEYMAP=us-acentos CONSOLEFONT=lat0-16 CONSOLEMAP= USECOLOR=yes # --- # HARDWARE # --- # # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed # MOD_BLACKLIST: Prevent udev from loading these modules # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist. # # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array. # MOD_AUTOLOAD=yes #MOD_BLACKLIST=() #deprecated MODULES=(iwl4965) # Scan for LVM volume groups at startup, required if you use LVM USELVM=no # --- # NETWORKING # --- # # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts # HOSTNAME=archie # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces. # # Interfaces to start at boot-up (in this order) # Declare each interface then list in INTERFACES # - prefix an entry in INTERFACES with a ! to disable it # - no hyphens in your interface names - Bash doesn't like it # # DHCP: Set your interface to dhcp (eth0=dhcp) # Wireless: See network profiles below # #Static IP example #eth0=eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255 eth0=dhcp wlan0=dhcp INTERFACES=(!eth0) WLAN_INTERFACES=(!wlan0) # Routes to start at boot-up (in this order) # Declare each route then list in ROUTES # - prefix an entry in ROUTES with a ! to disable it # gateway=default gw 192.168.0.1 ROUTES=(!gateway) # Enable these network profiles at boot-up. These are only useful # if you happen to need multiple network configurations (ie, laptop users) # - set to 'menu' to present a menu during boot-up (dialog package required) # - prefix an entry with a ! to disable it # # Network profiles are found in /etc/network.d # # This now requires the netcfg package # #NETWORKS=(main) # --- # DAEMONS # --- # # Daemons to start at boot-up (in this order) # - prefix a daemon with a ! to disable it # - prefix a daemon with a @ to start it up in the background # DAEMONS=(syslog-ng !network netfs crond @alsa hal fam networkmanager) # End ### And this is my iwconfig wlan0: iwconfig wlan0 wlan0 IEEE 802.11abgn ESSID: Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Some clue? Att, Alan Did you follow the procedures in the Wireless Setup wiki page? http://wiki.archlinux.org/index.php/Wireless_Setup T.
Re: [arch-general] Intel AG 4965
Tom K wrote: Flavio Costa wrote: Maybe the output of NetworkManager's log would be helpful too. Try # tail -f /var/log/messages while connecting to a wireless connection. On Thu, Oct 15, 2009 at 8:28 PM, Alan Hoffmeister alan...@gmail.com wrote: Hello guyz! First of all, let me introduce. My name is Alan Hoffmeister, I'm from Brazil and I'm a new user to Archlinux. I sucefully installed Arch and XFCE4 on my notebook (by the way, awesome performance compared to Win7), my wired network is connecting Ok, I'm using networkmanager to manage my connections... The nm-applet can see all SSIDs around my notebook, it ask me some password, but when it try to get an IP it fails... I had this problem whit wicd too.. Always failing to get an IP.. Here is my rc.conf: # Start ### # # /etc/rc.conf - Main Configuration for Arch Linux # # --- # LOCALIZATION # --- # # LOCALE: available languages can be listed with the 'locale -a' command # HARDWARECLOCK: set to UTC or localtime # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock # TIMEZONE: timezones are found in /usr/share/zoneinfo # KEYMAP: keymaps are found in /usr/share/kbd/keymaps # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US) # CONSOLEMAP: found in /usr/share/kbd/consoletrans # USECOLOR: use ANSI color sequences in startup messages # LOCALE=pt_BR.utf8 HARDWARECLOCK= USEDIRECTISA=no TIMEZONE=America/Sao_Paulo KEYMAP=us-acentos CONSOLEFONT=lat0-16 CONSOLEMAP= USECOLOR=yes # --- # HARDWARE # --- # # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed # MOD_BLACKLIST: Prevent udev from loading these modules # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist. # # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array. # MOD_AUTOLOAD=yes #MOD_BLACKLIST=() #deprecated MODULES=(iwl4965) # Scan for LVM volume groups at startup, required if you use LVM USELVM=no # --- # NETWORKING # --- # # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts # HOSTNAME=archie # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces. # # Interfaces to start at boot-up (in this order) # Declare each interface then list in INTERFACES # - prefix an entry in INTERFACES with a ! to disable it # - no hyphens in your interface names - Bash doesn't like it # # DHCP: Set your interface to dhcp (eth0=dhcp) # Wireless: See network profiles below # #Static IP example #eth0=eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255 eth0=dhcp wlan0=dhcp INTERFACES=(!eth0) WLAN_INTERFACES=(!wlan0) # Routes to start at boot-up (in this order) # Declare each route then list in ROUTES # - prefix an entry in ROUTES with a ! to disable it # gateway=default gw 192.168.0.1 ROUTES=(!gateway) # Enable these network profiles at boot-up. These are only useful # if you happen to need multiple network configurations (ie, laptop users) # - set to 'menu' to present a menu during boot-up (dialog package required) # - prefix an entry with a ! to disable it # # Network profiles are found in /etc/network.d # # This now requires the netcfg package # #NETWORKS=(main) # --- # DAEMONS # --- # # Daemons to start at boot-up (in this order) # - prefix a daemon with a ! to disable it # - prefix a daemon with a @ to start it up in the background # DAEMONS=(syslog-ng !network netfs crond @alsa hal fam networkmanager) # End ### And this is my iwconfig wlan0: iwconfig wlan0 wlan0 IEEE 802.11abgn ESSID: Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Some clue? Att, Alan Did you follow the procedures in the Wireless Setup wiki page? http://wiki.archlinux.org/index.php/Wireless_Setup T. Yeah I did, here is my messages.log tailed: ## START # Oct 16 05:11:58 archie NetworkManager: info (wlan0): device state change: 4 - 5 Oct 16 05:11:58
Re: [arch-general] Intel AG 4965
I would suggest trying some lower level tools, like netcfg or even wpa_supplicant directly, to see if it is the driver or the tool... 2009/10/16 Alan Hoffmeister alan...@gmail.com Tom K wrote: Flavio Costa wrote: Maybe the output of NetworkManager's log would be helpful too. Try # tail -f /var/log/messages while connecting to a wireless connection. On Thu, Oct 15, 2009 at 8:28 PM, Alan Hoffmeister alan...@gmail.com wrote: Hello guyz! First of all, let me introduce. My name is Alan Hoffmeister, I'm from Brazil and I'm a new user to Archlinux. I sucefully installed Arch and XFCE4 on my notebook (by the way, awesome performance compared to Win7), my wired network is connecting Ok, I'm using networkmanager to manage my connections... The nm-applet can see all SSIDs around my notebook, it ask me some password, but when it try to get an IP it fails... I had this problem whit wicd too.. Always failing to get an IP.. Here is my rc.conf: # Start ### # # /etc/rc.conf - Main Configuration for Arch Linux # # --- # LOCALIZATION # --- # # LOCALE: available languages can be listed with the 'locale -a' command # HARDWARECLOCK: set to UTC or localtime # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock # TIMEZONE: timezones are found in /usr/share/zoneinfo # KEYMAP: keymaps are found in /usr/share/kbd/keymaps # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US) # CONSOLEMAP: found in /usr/share/kbd/consoletrans # USECOLOR: use ANSI color sequences in startup messages # LOCALE=pt_BR.utf8 HARDWARECLOCK= USEDIRECTISA=no TIMEZONE=America/Sao_Paulo KEYMAP=us-acentos CONSOLEFONT=lat0-16 CONSOLEMAP= USECOLOR=yes # --- # HARDWARE # --- # # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed # MOD_BLACKLIST: Prevent udev from loading these modules # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist. # # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array. # MOD_AUTOLOAD=yes #MOD_BLACKLIST=() #deprecated MODULES=(iwl4965) # Scan for LVM volume groups at startup, required if you use LVM USELVM=no # --- # NETWORKING # --- # # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts # HOSTNAME=archie # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces. # # Interfaces to start at boot-up (in this order) # Declare each interface then list in INTERFACES # - prefix an entry in INTERFACES with a ! to disable it # - no hyphens in your interface names - Bash doesn't like it # # DHCP: Set your interface to dhcp (eth0=dhcp) # Wireless: See network profiles below # #Static IP example #eth0=eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255 eth0=dhcp wlan0=dhcp INTERFACES=(!eth0) WLAN_INTERFACES=(!wlan0) # Routes to start at boot-up (in this order) # Declare each route then list in ROUTES # - prefix an entry in ROUTES with a ! to disable it # gateway=default gw 192.168.0.1 ROUTES=(!gateway) # Enable these network profiles at boot-up. These are only useful # if you happen to need multiple network configurations (ie, laptop users) # - set to 'menu' to present a menu during boot-up (dialog package required) # - prefix an entry with a ! to disable it # # Network profiles are found in /etc/network.d # # This now requires the netcfg package # #NETWORKS=(main) # --- # DAEMONS # --- # # Daemons to start at boot-up (in this order) # - prefix a daemon with a ! to disable it # - prefix a daemon with a @ to start it up in the background # DAEMONS=(syslog-ng !network netfs crond @alsa hal fam networkmanager) # End ### And this is my iwconfig wlan0: iwconfig wlan0 wlan0 IEEE 802.11abgn ESSID: Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Some clue? Att, Alan Did you follow the procedures in the Wireless Setup wiki page?
Re: [arch-general] Intel AG 4965
On Fri 16 Oct 2009 06:33 -0300, Alan Hoffmeister wrote: OK, I'll try when I get home... On my work i could connect whit a WEP wireless... Maybe some problem whit the wpa stuff? Att, Alan Nicolas Bigaouette wrote: I would suggest trying some lower level tools, like netcfg or even wpa_supplicant directly, to see if it is the driver or the tool... 2009/10/16 Alan Hoffmeister alan...@gmail.com Tom K wrote: Flavio Costa wrote: Maybe the output of NetworkManager's log would be helpful too. Try # tail -f /var/log/messages while connecting to a wireless connection. On Thu, Oct 15, 2009 at 8:28 PM, Alan Hoffmeister alan...@gmail.com wrote: [...] Try to trim the excessive quoting guys.
