[fedora-arm] u-boot plans for Fedora 22 ?
Hi All, I assume that we will be rebasing u-boot to the just released v2015.01 for F-22? But I was wondering if there is any chance we can jump to v2015.04 ? The reason I'm asking is that things are progressing quite rapidly on the u-boot side, at least with Allwinner SoC support, I've just send a pull-req for v2015.04 with the following highlights: 1) Improved sun6i (A31) support, including support for the A31s variant and automatic assignment of a SoC serial based MAC address for ethernet 2) Full sun8i (A23) support including DRAM controller init and SPL, so now people can boot these boards using a full FOSS solution 3) Many improvement to the graphical console support, automatic selection of the native mode for HDMI/DVI monitors via DDC + EDID, LCD panel support, VGA output support 4) Preparation work for OTG controller support, together with 3) this allows using u-boot on tablets effortlessly. The rest of the OTG support is going upstream through the usb tree And if possible I would like to see this end up in Fedora 22 :) Regards, Hans ___ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
Re: [fedora-arm] u-boot plans for Fedora 22 ?
> I assume that we will be rebasing u-boot to the just released v2015.01 > for F-22? But I was wondering if there is any chance we can jump to > v2015.04 ? The reason I'm asking is that things are progressing > quite rapidly on the u-boot side, at least with Allwinner SoC support, > I've just send a pull-req for v2015.04 with the following highlights: Given 2015.01 is already built for F-22 I think that would be a safe bet ;-). 2015.04 is a possibility and not certain yet, will be much easier to tell once that make it to rc1, I've been watching the mailing list and we're aware of things being proposed. It depends on how much other fall out there is between now and release candidate stage. Peter ___ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
[fedora-arm] testing Fedora-Minimal-armhfp-rawhide-20150110-sda.raw.xz
I have finally squeezed some time in to run a test on a Cubieboard2. I will be doing more testing over the next couple weeks. I hope. This rawhide minimal is not prompting me during first boot for root passward, timezone, adduser. Not added yet? No longer have to modify boot for the 'console' option. That is working nicely. I plugged in the ethernet cable a while after logging in and it took some time to gain IP addressing. I am use to ifdown eth0;ifup eth0. Of course with no config file, these do not work. What do I use instead to give in this case dhcp a kick to get IP addresses? I see it comes with the 3.19 kernel. What uboot, per Hans' lastest email? Obviously I would like to test out video support. I will be able to do some of the 3.19 kernel testing once I get a few things up and working. As I am away until friday, and did not bring an HDMI cable with me to connect to the room TV, I will probably not be doing much else testing until friday. thanks for all your work. ___ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
[fedora-arm] Possible BUG in freeradius ARM
Hello Guys, I have freeradius-3.0.4-3.fc21.armv7hl failing to start , with this fault : root@BPi-R1 /etc/raddb # rpm -qa freeradius* freeradius-utils-3.0.4-3.fc21.armv7hl freeradius-3.0.4-3.fc21.armv7hl root@BPi-R1 /etc/raddb # radiusd -X libssl version mismatch. built: 100010af linked: 100010bf Looks like https://bugzilla.redhat.com/show_bug.cgi?id=1173821 , which was picked up on x86_64 platform . Latest comment says : freeradius-3.0.4-3.fc21 has been pushed to the Fedora 21 stable repository. If problems still persist, please make note of it in this bug report. Since users report this is working in x86_64 now , we may have an ARM specific issue here . Best Regards Milorad ___ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
Re: [fedora-arm] Banana Pi R1 on fedora 21 - all working
Hello Guys, Just to give you a bit of an update on my BananaPi R1 project . All is working well as far as the config is concerned, now it is time for it to be put into service . To get it up to this far , included the following : - Compiling kernel with OpenWrt source for b53 switch - Compiling 'swconfig' user-space program to control the switch - Configuring the WAN and LAN ports Here is my kernel : root@BPi-R1 ~ # rpm -qa kernel kernel-3.17.4-301.fc21.armv7hl kernel-3.18.1-2.BPiR1.fc21.armv7hl root@BPi-R1 ~ # uname -a Linux BPi-R1.homenet 3.18.1-2.BPiR1.fc21.armv7hl #1 SMP Sun Jan 11 14:12:35 AEDT 2015 armv7l armv7l armv7l GNU/Linux Since I was going to compile one , I thought might as well go with 3.18 . Here is the ifconfig and eth part of the dmesg : root@BPi-R1 ~ # dmesg | egrep -i '(eth|b53)' [8.866285] stmmaceth 1c5.ethernet: no reset control found [9.074829] eth0: PHY ID 03625f24 at 0 IRQ POLL (stmmac-0:00) active [9.081271] eth0: PHY ID 03625f24 at 1 IRQ POLL (stmmac-0:01) [9.087133] eth0: PHY ID 03625f24 at 2 IRQ POLL (stmmac-0:02) [9.087139] eth0: PHY ID 03625f24 at 3 IRQ POLL (stmmac-0:03) [9.087144] eth0: PHY ID 03625f24 at 4 IRQ POLL (stmmac-0:04) [9.087150] eth0: PHY ID 03625f24 at 30 IRQ POLL (stmmac-0:1e) [ 10.625698] b53_common: found switch: BCM53125, rev 4 [ 12.641193] stmmaceth 1c5.ethernet eth0: Link is Up - 1Gbps/Full - flow control off root@BPi-R1 ~ # ifconfig eth0: flags=4163 mtu 1500 inet 192.168.1.183 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fdc1:4e49:af09:1:58:2ff:fe42:9171 prefixlen 64 scopeid 0x0 inet6 fe80::58:2ff:fe42:9171 prefixlen 64 scopeid 0x20 ether 02:58:02:42:91:71 txqueuelen 1000 (Ethernet) RX packets 25599 bytes 10514233 (10.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16164 bytes 2439789 (2.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 117 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 0 (Local Loopback) RX packets 16 bytes 1504 (1.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16 bytes 1504 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@BPi-R1 ~ # nmcli con show NAMEUUID TYPEDEVICE Wired connection 1 d3e3650b-d7f1-4ddc-ae26-4ee611b38d1c 802-3-ethernet eth0 Here is what the switch looks like , it is an 8 port switch , with port 8 connecting to the NIC , while ports 4,0,1,2 go to the LAN connectors and port 3 goes to the WAN . Other ports 5,6,7 are internally disconnected like this : --- | P2 | P1 | P0 | P4 || P3 | --- Here is the switch printout : root@BPi-R1 ~ # /usr/sbin/swconfig dev eth0 show Global attributes: enable_vlan: 0 ports: 0x011f reset_mib: ??? enable_jumbo: 0 allow_vid_4095: 0 Port 0: mib: TxOctets: 0 TxDropPkts : 0 TxBroadcastPkts : 0 TxMulticastPkts : 0 TxUnicastPkts : 0 TxCollisions: 0 TxSingleCollision : 0 TxMultipleCollision : 0 TxDeferredTransmit : 0 TxLateCollision : 0 TxExcessiveCollision: 0 TxPausePkts : 0 RxOctets: 0 RxUndersizePkts : 0 RxPausePkts : 0 Pkts64Octets: 0 Pkts65to127Octets : 0 Pkts128to255Octets : 0 Pkts256to511Octets : 0 Pkts512to1023Octets : 0 Pkts1024to1522Octets: 0 RxOversizePkts : 0 RxJabbers : 0 RxAlignmentErrors : 0 RxFCSErrors : 0 RxGoodOctets: 0 RxDropPkts : 0 RxUnicastPkts : 0 RxMulticastPkts : 0 RxBroadcastPkts : 0 RxSAChanges : 0 RxFragments : 0 RxJumboPkts : 0 RxSymbolErrors : 0 RxDiscarded : 0 pvid: 0 link: port:0 link:down Port 1: mib: TxOctets: 0 TxDropPkts : 0 TxBroadcastPkts : 0 TxMulticastPkts : 0 TxUnicastPkts : 0 TxCollisions: 0 TxSingleCollision : 0 TxMultipleCollision : 0 TxDeferredTransmit : 0 TxLateCollision : 0 TxExcessiveCollision: 0 TxPausePkts : 0 RxOctets: 0 RxUndersizePkts : 0 RxPausePkts : 0 Pkts64Octets: 0 Pkts65to127Octets : 0 Pkts128to255Octets : 0 Pkts256to511Octets : 0 Pkts512to1023Octets : 0 Pkts1024to1522Octets: 0 RxOversizePkts : 0 RxJabbers : 0 RxAlignmentErrors : 0 RxFCSErrors : 0 RxGoodOctets: 0 RxDropPkts : 0 RxUnicastPkts : 0 RxMulticastPkts : 0 RxBroadcastPkts : 0 RxSAChanges : 0 RxFragments : 0 RxJumboPkts : 0 RxSymbolErrors : 0 RxDiscarded : 0 pvid: 0 link: port:1 link:down Port 2: mib: TxOctets: 0 TxDropPkts : 0 TxBroadcastPkts : 0 TxMulticastPkts : 0 TxUnicastPkts : 0 TxColli
Re: [fedora-arm] Banana Pi R1 on fedora 21 - all working
On Thu, Jan 15, 2015 at 05:06:42PM +1100, mo.ucina wrote: > Hello Guys, > > Just to give you a bit of an update on my BananaPi R1 project . All is > working well as far as the config is concerned, now it is time for it to be > put into service . > To get it up to this far , included the following : > > - Compiling kernel with OpenWrt source for b53 switch > - Compiling 'swconfig' user-space program to control the switch > - Configuring the WAN and LAN ports > > Here is my kernel : > root@BPi-R1 ~ # rpm -qa kernel > kernel-3.17.4-301.fc21.armv7hl > kernel-3.18.1-2.BPiR1.fc21.armv7hl Interesting can we get a diff against fedora kernel git to rebuild independently ? thanks, Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veill...@redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/ ___ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
Re: [fedora-arm] Possible BUG in freeradius ARM
On Thu, Jan 15, 2015 at 5:20 AM, mo.ucina wrote: > Hello Guys, > > I have freeradius-3.0.4-3.fc21.armv7hl failing to start , with this fault : > > root@BPi-R1 /etc/raddb # rpm -qa freeradius* > freeradius-utils-3.0.4-3.fc21.armv7hl > freeradius-3.0.4-3.fc21.armv7hl > root@BPi-R1 /etc/raddb # radiusd -X > libssl version mismatch. built: 100010af linked: 100010bf > > Looks like https://bugzilla.redhat.com/show_bug.cgi?id=1173821 , which was > picked up on x86_64 platform . Latest comment says : > > freeradius-3.0.4-3.fc21 has been pushed to the Fedora 21 stable repository. > If problems still persist, please make note of it in this bug report. > > Since users report this is working in x86_64 now , we may have an ARM > specific issue here . Update the bug report with the details of the ARMv7 issue. Peter ___ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
[fedora-arm] arm rawhide report: 20150115 changes
Compose started at Thu Jan 15 05:15:06 UTC 2015 New package: publican-icaro-0.1-1.fc22 Common documentation files for Icaro Updated Packages: ant-1.9.4-5.fc22 * Tue Jan 13 2015 Mat Booth - 0:1.9.4-5 - Resolves: rhbz#1180568 - Add rhino to classpath for bsf plug-in Size change: 177 bytes apache-commons-math-3.4.1-1.fc22 * Tue Jan 13 2015 Mohamed El Morabity - 3.4.1-1 - Update to 3.4.1 Size change: 47730 bytes createrepo-0.10.3-5.fc22 * Tue Jan 13 2015 James Antill - 0.10.3-5 - Update to latest HEAD, into the correct patch file :-o - Add Ian's parallel deltrarpm support. - allow 'sha' checksum type for modifyrepo - Fix open_checksum and open_size calculation in RepoMetadata.add(). - Fix several AttributeErrors in RepoMetadata.add(). * Mon Jan 12 2015 Ian McLeod - 0.10.3-4 - Pull in missing deltarpm patches (upstream fa0520 and bd5577) Size change: 9984 bytes drupal7-context-3.6-1.fc22 -- * Tue Jan 13 2015 Shawn Iwinski - 3.6-1 - Updated to 3.6 (DRUPAL-SA-CONTRIB-2015-004 / BZ #1180429) Size change: 202 bytes drupal7-rules-2.8-1.fc22 * Tue Jan 13 2015 Shawn Iwinski - 2.8-1 - Updated to 2.8 (BZ #1180431) - Spec cleanup - Removed RPM README b/c it only explained common Drupal workflow - %license usage Size change: -1674 bytes git-remote-hg-0.2-5.fc22 * Mon Jan 12 2015 Adam Williamson - 0.2-5 - backport an upstream PR to make it work with Mercurial 3.2 Size change: 1559 bytes golang-github-mitchellh-goamz-0-0.4.git32d1910.fc22 --- * Tue Jan 13 2015 jchaloup - 0-0.4.git32d1910 - Bump to upstream 32d1910e654ead1308d9073d8ccdd42d6922ee39 related: #1142399 * Fri Oct 10 2014 jchaloup - 0-0.3.git9cad7da - Add dependencies, replace motain/gocheck with check.v1 related: #1142399 Size change: 4207 bytes golang-gopkg-check-0-4.fc22 --- * Tue Jan 13 2015 jchaloup - 0-4 - Add github.com/motain/gocheck into Provides related: #1151779 * Tue Jan 13 2015 jchaloup - 0-3 - Add github.com/motain/gocheck into devel subpackage related: #1151779 Size change: 29294 bytes google-noto-fonts-20141117-6.fc22 - * Tue Jan 13 2015 Pravin Satpute - 20141117-6 - Resolves #1162341: Packaged Noto Color Emoji Size change: 723 bytes ibus-table-others-1.3.7-1.fc22 -- * Tue Jan 13 2015 Mike FABIAN - 1.3.7-1 - update to latest upstream 1.3.7 - Use F1,F2,F3,F4,F5,F6,F7,F8,F9 as select keys for the latex table - Make rusle agree with http://ru.pc-history.com/wp-content/uploads/ok-keyboard_xt-at1.jpg Size change: 3221 bytes iscan-firmware-20121031-3.fc22 -- * Tue Jan 13 2015 Simone Caronni - 20121031-3 - Add firmware name to description (eases configuration). - Adjust source urls. - Require linux-firmware on RHEL 7+ and Fedora. Size change: 4499 bytes libffi-3.1-7.fc22 - * Thu Jan 15 2015 Peter Robinson 3.1-7 - Add patch to fix issues on aarch64 (rhbz 1174037) Size change: -487 bytes openstack-glance-2014.2.1-2.fc22 * Tue Jan 13 2015 Haïkel Guémar - 2014.2.1-2 - Unrestricted path flow traversal (RHBZ #1174474) * Fri Dec 05 2014 Haïkel Guémar - 2014.2.1-1 - Update to upstream 2014.2.1 Size change: 7801 bytes perl-CPAN-Meta-2.143240-2.fc22 -- * Tue Jan 13 2015 Petr Pisar - 2.143240-2 - Correct dependencies Size change: 57 bytes perl-DateTime-Locale-0.45-11.fc22 - * Tue Jan 13 2015 Petr Pisar - 0.45-11 - Modernize spec file Size change: 373 bytes perl-REST-Client-272-1.fc22 --- * Wed Jan 14 2015 David Dick - 272-1 - Update to 272 Size change: 130 bytes perl-Sys-Hostname-Long-1.5-1.fc22 - * Tue Jan 13 2015 Paul Howarth - 1.5-1 - Update to 1.5 - Improvements by Michiel Bejen - Classify buildreqs by usage - General spec clean-up Size change: 1019 bytes perl-Test-CPAN-Meta-0.24-1.fc22 --- * Tue Jan 13 2015 Paul Howarth - 0.24-1 - Update to 0.24 - Extended META test suite - Added META.json and tests - Documentation updates - Classify buildreqs by usage - Use a patch rather than scripted iconv to fix character encoding - Modernize spec Size change: 2857 bytes perl-Test-CPAN-Meta-JSON-0.16-1.fc22 * Wed Jan 14 2015 Paul Howarth - 0.16-1 - Update to 0.16 - Fixed license fields in META.json to be lists - Extended META test suite - Added '2.0' as an alias to '2' version spec. - License MUST be a list of strings - Classify buildreqs by usage - Update UTF8 patch - Use %license where possible Size change: 1897 bytes perl-parent-0.228-311.fc22 -- * Tue Jan 13 2015 Petr Pisar - 1:0.228-311 - Spec
