Re: [ARMedslack] Got a toshiba AC100
Ok I followed instructions from http://ac100.gudinna.com/README/ to get ubuntoo 10.10 working off the SD. I then mixed up an armedslack miniroot 13.1 (any higher would hit the udev kernel version requirement issue) with the kernel modules from ubuntu 10.10 for ac100 in an attempt to get a base system booting off the SD. All looked right while starting to boot until I hit a kernel panic: attempting to kill init Anyone have any ideas how to fix this or what's actually causing it ? Having got as far as that I suppose the root got mounted. Init being the first binary to be executed I guess it's having some trouble: could it be something wrong with the console ? I got very few messages on console while kernel was starting so I suppose ither kernel has been configured to be very quiet or the console is not where I'm looking. Could init kill itself if it finds nowhere to spraun getty for console ? Regards David --- Gio 14/7/11, Thorsten Mühlfelder ha scritto: > Da: Thorsten Mühlfelder > Oggetto: Re: [ARMedslack] Got a toshiba AC100 > A: armedslack@lists.armedslack.org > Data: Giovedì 14 luglio 2011, 20:34 > Am Thu, 14 Jul 2011 19:07:31 +0100 > (BST) > schrieb Davide : > > > I'm worried about binary compatibility as "armedslack > > binaries will run on almost any arm platform" but that > does not mean > > they will run on every arm platform. > > They are built for armv4 and the Tegra should be at least > armv6 so they > should run without problems. > > > -- > Thorsten Mühlfelder > Salix OS: www.salixos.org > ___ > ARMedslack mailing list > ARMedslack@lists.armedslack.org > http://lists.armedslack.org/mailman/listinfo/armedslack > ___ ARMedslack mailing list ARMedslack@lists.armedslack.org http://lists.armedslack.org/mailman/listinfo/armedslack
Re: [ARMedslack] Got a toshiba AC100
Am Friday 15 July 2011 09:21:53 schrieb Davide: > Ok I followed instructions from http://ac100.gudinna.com/README/ to get > ubuntoo 10.10 working off the SD. > > I then mixed up an armedslack miniroot 13.1 (any higher would hit the udev > kernel version requirement issue) with the kernel modules from ubuntu 10.10 > for ac100 in an attempt to get a base system booting off the SD. > > All looked right while starting to boot until I hit a kernel panic: > attempting to kill init Could you make some photos of the interesting error messages? If you do, don't attach them to the mail. Instead upload them to an image hoster. -- Thorsten Mühlfelder Salix OS: www.salixos.org ___ ARMedslack mailing list ARMedslack@lists.armedslack.org http://lists.armedslack.org/mailman/listinfo/armedslack
Re: [ARMedslack] Got a toshiba AC100
To reduce possible faliures to a minimum I did the same with clashNG. Maybe I did not look well enough the first time but this time I got for sure another intresting message before init killing itself: Kernel too old Don't think a picture is necessary for that. Now I'm not 100% sure that I also had this on slackware 13.1 miniroot but since I use slackware 13.1 to build clashNG I'm strongly suspecting that I had the same message but did not notice it since it wan not on the last line. Damn Anyone know what boot loader is on the AC100 ... maybe it's possible to have more then one kernel lingering around ? Anyone know how to build kernel for the ac100 that will run armedslack ? Regards David --- Ven 15/7/11, Thorsten Mühlfelder ha scritto: > Da: Thorsten Mühlfelder > Oggetto: Re: [ARMedslack] Got a toshiba AC100 > A: "Slackware ARM port" > Data: Venerdì 15 luglio 2011, 10:14 > Am Friday 15 July 2011 09:21:53 > schrieb Davide: > > Ok I followed instructions from http://ac100.gudinna.com/README/ to get > > ubuntoo 10.10 working off the SD. > > > > I then mixed up an armedslack miniroot 13.1 (any > higher would hit the udev > > kernel version requirement issue) with the kernel > modules from ubuntu 10.10 > > for ac100 in an attempt to get a base system booting > off the SD. > > > > All looked right while starting to boot until I hit a > kernel panic: > > attempting to kill init > > Could you make some photos of the interesting error > messages? If you do, don't > attach them to the mail. Instead upload them to an image > hoster. > > > -- > Thorsten Mühlfelder > Salix OS: www.salixos.org > ___ > ARMedslack mailing list > ARMedslack@lists.armedslack.org > http://lists.armedslack.org/mailman/listinfo/armedslack > ___ ARMedslack mailing list ARMedslack@lists.armedslack.org http://lists.armedslack.org/mailman/listinfo/armedslack
Re: [ARMedslack] Got a toshiba AC100
Take a look here: http://people.canonical.com/~ogra/tegra/2.6.37/ and https://launchpad.net/~ac100/+archive/ppa Perhaps you'll find a working kernel there. Otherwise you should find newer kernel sources there and the config of the 2.6.29 kernel here: http://ac100.gudinna.com/kernel/config.txt You could use Codesourcery's toolchain to cross compile this kernel then. Make sure you are using the EABI toolchain. You also could compile the kernel on a Dockstar or some other ARMed Slack system. Am Friday 15 July 2011 11:23:06 schrieb Davide: > To reduce possible faliures to a minimum I did the same with clashNG. > Maybe I did not look well enough the first time but this time I got for > sure another intresting message before init killing itself: Kernel too old > > Don't think a picture is necessary for that. > > Now I'm not 100% sure that I also had this on slackware 13.1 miniroot but > since I use slackware 13.1 to build clashNG I'm strongly suspecting that I > had the same message but did not notice it since it wan not on the last > line. > > Damn > > Anyone know what boot loader is on the AC100 ... maybe it's possible to > have more then one kernel lingering around ? Anyone know how to build > kernel for the ac100 that will run armedslack ? > > Regards > David > > --- Ven 15/7/11, Thorsten Mühlfelder ha scritto: > > Da: Thorsten Mühlfelder > > Oggetto: Re: [ARMedslack] Got a toshiba AC100 > > A: "Slackware ARM port" > > Data: Venerdì 15 luglio 2011, 10:14 > > Am Friday 15 July 2011 09:21:53 > > > > schrieb Davide: > > > Ok I followed instructions from http://ac100.gudinna.com/README/ to get > > > ubuntoo 10.10 working off the SD. > > > > > > I then mixed up an armedslack miniroot 13.1 (any > > > > higher would hit the udev > > > > > kernel version requirement issue) with the kernel > > > > modules from ubuntu 10.10 > > > > > for ac100 in an attempt to get a base system booting > > > > off the SD. > > > > > All looked right while starting to boot until I hit a > > > > kernel panic: > > > attempting to kill init > > > > Could you make some photos of the interesting error > > messages? If you do, don't > > attach them to the mail. Instead upload them to an image > > hoster. > > > > > > -- > > Thorsten Mühlfelder > > Salix OS: www.salixos.org > > ___ > > ARMedslack mailing list > > ARMedslack@lists.armedslack.org > > http://lists.armedslack.org/mailman/listinfo/armedslack > > ___ > ARMedslack mailing list > ARMedslack@lists.armedslack.org > http://lists.armedslack.org/mailman/listinfo/armedslack -- Thorsten Mühlfelder Salix OS: www.salixos.org ___ ARMedslack mailing list ARMedslack@lists.armedslack.org http://lists.armedslack.org/mailman/listinfo/armedslack
Re: [ARMedslack] Got a toshiba AC100
Thanks ... good info. Can I have 2 kernels without having to hook up and reflash the original kernel ? If I flash the new kernel into partition 5 I guess that the original andriod will stop working correctly. Since currently I guess it's the only thing that will make all onboard peripherals work correctly it's something I don't want to do untill the open source kernel starts supporting everything. Regards David --- Ven 15/7/11, Thorsten Mühlfelder ha scritto: > Da: Thorsten Mühlfelder > Oggetto: Re: [ARMedslack] Got a toshiba AC100 > A: "Slackware ARM port" > Data: Venerdì 15 luglio 2011, 11:49 > Take a look here: > http://people.canonical.com/~ogra/tegra/2.6.37/ > and > https://launchpad.net/~ac100/+archive/ppa > > Perhaps you'll find a working kernel there. Otherwise you > should find newer > kernel sources there and the config of the 2.6.29 kernel > here: > http://ac100.gudinna.com/kernel/config.txt > > You could use Codesourcery's toolchain to cross compile > this kernel then. Make > sure you are using the EABI toolchain. > You also could compile the kernel on a Dockstar or some > other ARMed Slack > system. > > > Am Friday 15 July 2011 11:23:06 schrieb Davide: > > To reduce possible faliures to a minimum I did the > same with clashNG. > > Maybe I did not look well enough the first time but > this time I got for > > sure another intresting message before init killing > itself: Kernel too old > > > > Don't think a picture is necessary for that. > > > > Now I'm not 100% sure that I also had this on > slackware 13.1 miniroot but > > since I use slackware 13.1 to build clashNG I'm > strongly suspecting that I > > had the same message but did not notice it since it > wan not on the last > > line. > > > > Damn > > > > Anyone know what boot loader is on the AC100 ... maybe > it's possible to > > have more then one kernel lingering around ? Anyone > know how to build > > kernel for the ac100 that will run armedslack ? > > > > Regards > > David > > > > --- Ven 15/7/11, Thorsten Mühlfelder > ha scritto: > > > Da: Thorsten Mühlfelder > > > Oggetto: Re: [ARMedslack] Got a toshiba AC100 > > > A: "Slackware ARM port" > > > Data: Venerdì 15 luglio 2011, 10:14 > > > Am Friday 15 July 2011 09:21:53 > > > > > > schrieb Davide: > > > > Ok I followed instructions from http://ac100.gudinna.com/README/ to get > > > > ubuntoo 10.10 working off the SD. > > > > > > > > I then mixed up an armedslack miniroot 13.1 > (any > > > > > > higher would hit the udev > > > > > > > kernel version requirement issue) with the > kernel > > > > > > modules from ubuntu 10.10 > > > > > > > for ac100 in an attempt to get a base system > booting > > > > > > off the SD. > > > > > > > All looked right while starting to boot > until I hit a > > > > > > kernel panic: > > > > attempting to kill init > > > > > > Could you make some photos of the interesting > error > > > messages? If you do, don't > > > attach them to the mail. Instead upload them to > an image > > > hoster. > > > > > > > > > -- > > > Thorsten Mühlfelder > > > Salix OS: www.salixos.org > > > ___ > > > ARMedslack mailing list > > > ARMedslack@lists.armedslack.org > > > http://lists.armedslack.org/mailman/listinfo/armedslack > > > > ___ > > ARMedslack mailing list > > ARMedslack@lists.armedslack.org > > http://lists.armedslack.org/mailman/listinfo/armedslack > > > > -- > Thorsten Mühlfelder > Salix OS: www.salixos.org > ___ > ARMedslack mailing list > ARMedslack@lists.armedslack.org > http://lists.armedslack.org/mailman/listinfo/armedslack > ___ ARMedslack mailing list ARMedslack@lists.armedslack.org http://lists.armedslack.org/mailman/listinfo/armedslack