The wizard is just to give you an idea of what the URL is like.. you have to
manually insert stuff like port numbers (if you are using the MS global
port) in the URL to make it work..
Joe
-Original Message-
From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] Behalf Of Patel, Kamlesh R.
Sent: Wednesday, April 18, 2007 2:41 PM
To: arslist@ARSLIST.ORG
Subject: Re: ARS 7.0.1 Patch 001; ARDBC LDAP question---RESOLVED
**
All,
I have setup all forms correctly with appropriate timeout and page size.
There is a BMC technote to explain this away… I had to save existing sample
form and set the url manually.
Technote is:
http://support.bmc.com/KMSUSER/DocView_SHFrame.htm?p=&user=public&d=/kmspubl
ic/KM-00026053.htm&vg=selfhelp
Please look at the Step 4 … it says “4. Don't use the Vendor form wizard
to create the vendor form.”
--
From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook
Sent: Wednesday, April 18, 2007 8:59 AM
To: arslist@ARSLIST.ORG
Subject: Re: ARS 7.0.1 Patch 001; ARDBC LDAP question
You might also ensure that the timeout setting isn't set too low - make it
3-5 minutes, to ensure that there's enough time for it to have a legitimate
chance to connect to the LDAP server.
Rick
--
From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] On Behalf Of Joe D'Souza
Sent: Tuesday, April 17, 2007 4:26 PM
To: arslist@ARSLIST.ORG
Subject: Re: ARS 7.0.1 Patch 001; ARDBC LDAP question
**
Kamlesh,
Did you configure the ARDBC LDAP configuration form correctly? Once that
is configured with all the required parameters correctly, the LDAP vendor
entry should show up while creating the vendor form..
Joe
-Original Message-
From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] Behalf Of Patel, Kamlesh R.
Sent: Monday, April 16, 2007 5:45 PM
To: arslist@ARSLIST.ORG
Subject: ARS 7.0.1 Patch 001; ARDBC LDAP question
**
All,
I am at a lose after configuring ARDBC LDAP Configuration form. I
configured it, but I am unable to view the vendor form in the list create
vendor form “Available Vendor Names”. It only shows the flashboards and
server admin.
What are the necessary steps to setup ARDBC LDAP form so that I can
query my LDAP directory?
Thanks
Kamlesh
__20060125___This posting was submitted with HTML in
it___
__20060125___This posting was submitted with HTML in
it___
__20060125___This posting was submitted with HTML in
it___ __20060125___This posting was submitted with HTML
in it___
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.5.2/766 - Release Date: 4/18/2007
7:39 AM
___
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the
Answers Are"
