Re: Highlighting table field rows
I ended up taking Fred's solution, which works well enough. Thanks for the confirmation that I wasn't losing my mind! Rick On Wed, Sep 24, 2008 at 12:15 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: > ** > > There is a RP to deselect all, and select all but none for selecting the > results of a query, or delselecting a query after a select all.. > > > > Joe > > - Original Message > From: "Opela, Gary L CTR USAF AFMC 72 CS/SCBAH" < > [EMAIL PROTECTED]> > To: arslist@ARSLIST.ORG > Sent: Wednesday, September 24, 2008 8:10:37 AM > Subject: Re: Highlighting table field rows > > Since you can select all of them, is there a RP to de-select a row? > Basically, you could start out by selecting all of the rows, then just > deselect the rows you don't want.. > > I doubt there is one, but that would get around the issue you are having. > It would make sense if they had one. > > -Original Message- > From: Action Request System discussion list(ARSList) > [mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook > Sent: Tuesday, September 23, 2008 5:05 PM > To: arslist@ARSLIST.ORG > Subject: Re: Highlighting table field rows > > ** > There is an RP to select the contents of a table (all of them), and one to > select the results, but no actual action to change the display > characteristics of the row - that's what is missing from all of the > strategies we've considered. I did consider an External, and even modifying > the JSP or something, but I'm still left with either a very messy bunch of > workflow and/or something that doesn't look right on the Mid-Tier. I may > just have to do it old school and return a results list. > > Thanks, Joe. > > Rick > > > On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> > wrote: > > ** > Thats true. I think it allows only a single selection. I wonder if there is > a RP to select the results of a query.. Just like the application delete RP > can delete the results of a query.. If not it might be a good RFE.. > > And your workaround for now could be a table with a dynamic external > qualification.. Not quite the look and feel of what you want to achieve > though.. > > Joe > > - Original Message > From: Rick Cook <[EMAIL PROTECTED]> > To: arslist@ARSLIST.ORG > Sent: Tuesday, September 23, 2008 5:25:48 PM > Subject: Re: Highlighting table field rows > > > ** > I was just looking at the APIs and RPs. The only problem with > PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be > an action to actually highlight the row in sequence, much less allow this > multiple times. > > Rick > > __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" > html___ > ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
There is a RP to deselect all, and select all but none for selecting the results of a query, or delselecting a query after a select all.. Joe - Original Message From: "Opela, Gary L CTR USAF AFMC 72 CS/SCBAH" <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Wednesday, September 24, 2008 8:10:37 AM Subject: Re: Highlighting table field rows Since you can select all of them, is there a RP to de-select a row? Basically, you could start out by selecting all of the rows, then just deselect the rows you don't want.. I doubt there is one, but that would get around the issue you are having. It would make sense if they had one. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook Sent: Tuesday, September 23, 2008 5:05 PM To: arslist@ARSLIST.ORG Subject: Re: Highlighting table field rows ** There is an RP to select the contents of a table (all of them), and one to select the results, but no actual action to change the display characteristics of the row - that's what is missing from all of the strategies we've considered. I did consider an External, and even modifying the JSP or something, but I'm still left with either a very messy bunch of workflow and/or something that doesn't look right on the Mid-Tier. I may just have to do it old school and return a results list. Thanks, Joe. Rick On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** Thats true. I think it allows only a single selection. I wonder if there is a RP to select the results of a query.. Just like the application delete RP can delete the results of a query.. If not it might be a good RFE.. And your workaround for now could be a table with a dynamic external qualification.. Not quite the look and feel of what you want to achieve though.. Joe - Original Message From: Rick Cook <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 5:25:48 PM Subject: Re: Highlighting table field rows ** I was just looking at the APIs and RPs. The only problem with PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be an action to actually highlight the row in sequence, much less allow this multiple times. Rick ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
One monkey in the wrench is that on the Mid-Tier, the rows alternate in color (a nice usability feature). To make something like this work, they'd either have to make highlighting stand out from that or give us the ability to control the color of rows dynamically. Rick On Wed, Sep 24, 2008 at 5:27 AM, Dwayne Martin <[EMAIL PROTECTED]> wrote: > Several months ago I submitted an enhancement request to allow the > selection of multiple rows. > > Is there any chance that if more people requested it they would actually do > it? > > Dwayne Martin > James Madison University > > Original message > >Date: Wed, 24 Sep 2008 07:10:37 -0500 > >From: "Opela, Gary L CTR USAF AFMC 72 CS/SCBAH" < > [EMAIL PROTECTED]> > >Subject: Re: Highlighting table field rows > >To: arslist@ARSLIST.ORG > > > >Since you can select all of them, is there a RP to de-select a row? > >Basically, you could start out by selecting all of the rows, then just > >deselect the rows you don't want.. > > > >I doubt there is one, but that would get around the issue you are > >having. It would make sense if they had one. > > > >-Original Message- > >From: Action Request System discussion list(ARSList) > >[mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook > >Sent: Tuesday, September 23, 2008 5:05 PM > >To: arslist@ARSLIST.ORG > >Subject: Re: Highlighting table field rows > > > >** > >There is an RP to select the contents of a table (all of them), and one > >to select the results, but no actual action to change the display > >characteristics of the row - that's what is missing from all of the > >strategies we've considered. I did consider an External, and even > >modifying the JSP or something, but I'm still left with either a very > >messy bunch of workflow and/or something that doesn't look right on the > >Mid-Tier. I may just have to do it old school and return a results > >list. > > > >Thanks, Joe. > > > >Rick > > > > > >On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> > >wrote: > > > > > > ** > > Thats true. I think it allows only a single selection. I wonder > >if there is a RP to select the results of a query.. Just like the > >application delete RP can delete the results of a query.. If not it > >might be a good RFE.. > > > > And your workaround for now could be a table with a dynamic > >external qualification.. Not quite the look and feel of what you want to > >achieve though.. > > > > Joe > > > > - Original Message > > From: Rick Cook <[EMAIL PROTECTED]> > > To: arslist@ARSLIST.ORG > > > > Sent: Tuesday, September 23, 2008 5:25:48 PM > > Subject: Re: Highlighting table field rows > > > > > > ** > > I was just looking at the APIs and RPs. The only problem with > >PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to > >be an action to actually highlight the row in sequence, much less allow > >this multiple times. > > > > Rick > > > > > > On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza > ><[EMAIL PROTECTED]> wrote: > > > > > > ** > > > > What about Perform-Action-Table-Select-Node >ID> > > > > > > > > Do not use the optional arguments Column number and > >flag.. > > > > > > > > Joe > > > > > > > > - Original Message > > From: Mark Milke <[EMAIL PROTECTED]> > > To: arslist@ARSLIST.ORG > > Sent: Tuesday, September 23, 2008 4:53:59 PM > > Subject: Re: Highlighting table field rows > > > > Rick, > > > > as far I'm concerned this is not possible via Workflow. > >You can highlight only one row at a time. > > The only idea that I haven't tested yet would be to > >press the Shift Key via OLE while making the loop. > > > > > > Mark > > > > On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> > >wrote: > > I have a table field on which I wish to hightlight only > >the selected rows that match a search field. > > > > The AL Guide is built, and the AL logs shows that it > >seems to be
Re: Highlighting table field rows
It just populated the "Selected" column on those specific rows From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook Sent: Tuesday, September 23, 2008 5:25 PM To: arslist@ARSLIST.ORG Subject: Re: Highlighting table field rows ** I thought about doing something like that, too. Did that actually highlight all of the rows, or just have that "Selected" field populated? Rick On Tue, Sep 23, 2008 at 3:17 PM, Grooms, Frederick W <[EMAIL PROTECTED]> wrote: ** I found that out a while ago. What I did was to create a "Selected" column by adding a new column to the table that pointed to a DisplayOnly field From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook Sent: Tuesday, September 23, 2008 5:05 PM To: arslist@ARSLIST.ORG Subject: Re: Highlighting table field rows ** There is an RP to select the contents of a table (all of them), and one to select the results, but no actual action to change the display characteristics of the row - that's what is missing from all of the strategies we've considered. I did consider an External, and even modifying the JSP or something, but I'm still left with either a very messy bunch of workflow and/or something that doesn't look right on the Mid-Tier. I may just have to do it old school and return a results list. Thanks, Joe. Rick On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** Thats true. I think it allows only a single selection. I wonder if there is a RP to select the results of a query.. Just like the application delete RP can delete the results of a query.. If not it might be a good RFE.. And your workaround for now could be a table with a dynamic external qualification.. Not quite the look and feel of what you want to achieve though.. Joe - Original Message From: Rick Cook <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 5:25:48 PM Subject: Re: Highlighting table field rows ** I was just looking at the APIs and RPs. The only problem with PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be an action to actually highlight the row in sequence, much less allow this multiple times. Rick On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** What about Perform-Action-Table-Select-Node Do not use the optional arguments Column number and flag.. Joe - Original Message From: Mark Milke <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 4:53:59 PM Subject: Re: Highlighting table field rows Rick, as far I'm concerned this is not possible via Workflow. You can highlight only one row at a time. The only idea that I haven't tested yet would be to press the Shift Key via OLE while making the loop. Mark On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: I have a table field on which I wish to hightlight only the selected rows that match a search field. The AL Guide is built, and the AL logs shows that it seems to be catching the correct records, but the rows aren't highlighting. What is the actual action in the AL to do that in the Guide? Rick __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
Several months ago I submitted an enhancement request to allow the selection of multiple rows. Is there any chance that if more people requested it they would actually do it? Dwayne Martin James Madison University Original message >Date: Wed, 24 Sep 2008 07:10:37 -0500 >From: "Opela, Gary L CTR USAF AFMC 72 CS/SCBAH" <[EMAIL PROTECTED]> >Subject: Re: Highlighting table field rows >To: arslist@ARSLIST.ORG > >Since you can select all of them, is there a RP to de-select a row? >Basically, you could start out by selecting all of the rows, then just >deselect the rows you don't want.. > >I doubt there is one, but that would get around the issue you are >having. It would make sense if they had one. > >-Original Message- >From: Action Request System discussion list(ARSList) >[mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook >Sent: Tuesday, September 23, 2008 5:05 PM >To: arslist@ARSLIST.ORG >Subject: Re: Highlighting table field rows > >** >There is an RP to select the contents of a table (all of them), and one >to select the results, but no actual action to change the display >characteristics of the row - that's what is missing from all of the >strategies we've considered. I did consider an External, and even >modifying the JSP or something, but I'm still left with either a very >messy bunch of workflow and/or something that doesn't look right on the >Mid-Tier. I may just have to do it old school and return a results >list. > >Thanks, Joe. > >Rick > > >On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> >wrote: > > > ** > Thats true. I think it allows only a single selection. I wonder >if there is a RP to select the results of a query.. Just like the >application delete RP can delete the results of a query.. If not it >might be a good RFE.. > > And your workaround for now could be a table with a dynamic >external qualification.. Not quite the look and feel of what you want to >achieve though.. > > Joe > > - Original Message > From: Rick Cook <[EMAIL PROTECTED]> > To: arslist@ARSLIST.ORG > > Sent: Tuesday, September 23, 2008 5:25:48 PM > Subject: Re: Highlighting table field rows > > > ** > I was just looking at the APIs and RPs. The only problem with >PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to >be an action to actually highlight the row in sequence, much less allow >this multiple times. > > Rick > > > On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza ><[EMAIL PROTECTED]> wrote: > > > ** > > What about Perform-Action-Table-Select-Node ID> > > > > Do not use the optional arguments Column number and >flag.. > > > > Joe > > > > - Original Message > From: Mark Milke <[EMAIL PROTECTED]> > To: arslist@ARSLIST.ORG > Sent: Tuesday, September 23, 2008 4:53:59 PM > Subject: Re: Highlighting table field rows > > Rick, > > as far I'm concerned this is not possible via Workflow. >You can highlight only one row at a time. > The only idea that I haven't tested yet would be to >press the Shift Key via OLE while making the loop. > > > Mark > > On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> >wrote: > I have a table field on which I wish to hightlight only >the selected rows that match a search field. > > The AL Guide is built, and the AL logs shows that it >seems to be catching the correct records, but the rows aren't >highlighting. What is the actual action in the AL to do that in the >Guide? > > Rick > > > __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the >Answers Are" html___ > > >__Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" >html___ > >___ >UNSUBSCRIBE or access ARSlist Archives at www.arslist.org >Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
Since you can select all of them, is there a RP to de-select a row? Basically, you could start out by selecting all of the rows, then just deselect the rows you don't want.. I doubt there is one, but that would get around the issue you are having. It would make sense if they had one. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook Sent: Tuesday, September 23, 2008 5:05 PM To: arslist@ARSLIST.ORG Subject: Re: Highlighting table field rows ** There is an RP to select the contents of a table (all of them), and one to select the results, but no actual action to change the display characteristics of the row - that's what is missing from all of the strategies we've considered. I did consider an External, and even modifying the JSP or something, but I'm still left with either a very messy bunch of workflow and/or something that doesn't look right on the Mid-Tier. I may just have to do it old school and return a results list. Thanks, Joe. Rick On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** Thats true. I think it allows only a single selection. I wonder if there is a RP to select the results of a query.. Just like the application delete RP can delete the results of a query.. If not it might be a good RFE.. And your workaround for now could be a table with a dynamic external qualification.. Not quite the look and feel of what you want to achieve though.. Joe - Original Message From: Rick Cook <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 5:25:48 PM Subject: Re: Highlighting table field rows ** I was just looking at the APIs and RPs. The only problem with PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be an action to actually highlight the row in sequence, much less allow this multiple times. Rick On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** What about Perform-Action-Table-Select-Node Do not use the optional arguments Column number and flag.. Joe - Original Message From: Mark Milke <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 4:53:59 PM Subject: Re: Highlighting table field rows Rick, as far I'm concerned this is not possible via Workflow. You can highlight only one row at a time. The only idea that I haven't tested yet would be to press the Shift Key via OLE while making the loop. Mark On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: I have a table field on which I wish to hightlight only the selected rows that match a search field. The AL Guide is built, and the AL logs shows that it seems to be catching the correct records, but the rows aren't highlighting. What is the actual action in the AL to do that in the Guide? Rick __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
I thought about doing something like that, too. Did that actually highlight all of the rows, or just have that "Selected" field populated? Rick On Tue, Sep 23, 2008 at 3:17 PM, Grooms, Frederick W < [EMAIL PROTECTED]> wrote: > ** I found that out a while ago. What I did was to create a "Selected" > column by adding a new column to the table that pointed to a DisplayOnly > field > > -- > *From:* Action Request System discussion list(ARSList) [mailto: > [EMAIL PROTECTED] *On Behalf Of *Rick Cook > *Sent:* Tuesday, September 23, 2008 5:05 PM > *To:* arslist@ARSLIST.ORG > > *Subject:* Re: Highlighting table field rows > > ** There is an RP to select the contents of a table (all of them), and one > to select the results, but no actual action to change the display > characteristics of the row - that's what is missing from all of the > strategies we've considered. I did consider an External, and even modifying > the JSP or something, but I'm still left with either a very messy bunch of > workflow and/or something that doesn't look right on the Mid-Tier. I may > just have to do it old school and return a results list. > > Thanks, Joe. > > Rick > > On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: > >> ** >> Thats true. I think it allows only a single selection. I wonder if there >> is a RP to select the results of a query.. Just like the application delete >> RP can delete the results of a query.. If not it might be a good RFE.. >> >> And your workaround for now could be a table with a dynamic external >> qualification.. Not quite the look and feel of what you want to achieve >> though.. >> >> Joe >> >> - Original Message >> From: Rick Cook <[EMAIL PROTECTED]> >> To: arslist@ARSLIST.ORG >> Sent: Tuesday, September 23, 2008 5:25:48 PM >> Subject: Re: Highlighting table field rows >> >> ** I was just looking at the APIs and RPs. The only problem with >> PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be >> an action to actually highlight the row in sequence, much less allow this >> multiple times. >> >> Rick >> >> On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza <[EMAIL PROTECTED]>wrote: >> >>> ** >>> >>> What about Perform-Action-Table-Select-Node >>> >>> >>> >>> Do not use the optional arguments Column number and flag.. >>> >>> >>> >>> Joe >>> >>> - Original Message >>> From: Mark Milke <[EMAIL PROTECTED]> >>> To: arslist@ARSLIST.ORG >>> Sent: Tuesday, September 23, 2008 4:53:59 PM >>> Subject: Re: Highlighting table field rows >>> >>> Rick, >>> >>> as far I'm concerned this is not possible via Workflow. You can highlight >>> only one row at a time. >>> The only idea that I haven't tested yet would be to press the Shift Key >>> via OLE while making the loop. >>> >>> >>> Mark >>> >>> On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: >>> I have a table field on which I wish to hightlight only the selected rows >>> that match a search field. >>> >>> The AL Guide is built, and the AL logs shows that it seems to be catching >>> the correct records, but the rows aren't highlighting. What is the actual >>> action in the AL to do that in the Guide? >>> >>> Rick >>> >> >> __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" >> html___ >> > > __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" > html___ > __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" > html___ > ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
I found that out a while ago. What I did was to create a "Selected" column by adding a new column to the table that pointed to a DisplayOnly field From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Rick Cook Sent: Tuesday, September 23, 2008 5:05 PM To: arslist@ARSLIST.ORG Subject: Re: Highlighting table field rows ** There is an RP to select the contents of a table (all of them), and one to select the results, but no actual action to change the display characteristics of the row - that's what is missing from all of the strategies we've considered. I did consider an External, and even modifying the JSP or something, but I'm still left with either a very messy bunch of workflow and/or something that doesn't look right on the Mid-Tier. I may just have to do it old school and return a results list. Thanks, Joe. Rick On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** Thats true. I think it allows only a single selection. I wonder if there is a RP to select the results of a query.. Just like the application delete RP can delete the results of a query.. If not it might be a good RFE.. And your workaround for now could be a table with a dynamic external qualification.. Not quite the look and feel of what you want to achieve though.. Joe - Original Message From: Rick Cook <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 5:25:48 PM Subject: Re: Highlighting table field rows ** I was just looking at the APIs and RPs. The only problem with PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be an action to actually highlight the row in sequence, much less allow this multiple times. Rick On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** What about Perform-Action-Table-Select-Node Do not use the optional arguments Column number and flag.. Joe - Original Message From: Mark Milke <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 4:53:59 PM Subject: Re: Highlighting table field rows Rick, as far I'm concerned this is not possible via Workflow. You can highlight only one row at a time. The only idea that I haven't tested yet would be to press the Shift Key via OLE while making the loop. Mark On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: I have a table field on which I wish to hightlight only the selected rows that match a search field. The AL Guide is built, and the AL logs shows that it seems to be catching the correct records, but the rows aren't highlighting. What is the actual action in the AL to do that in the Guide? Rick __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
There is an RP to select the contents of a table (all of them), and one to select the results, but no actual action to change the display characteristics of the row - that's what is missing from all of the strategies we've considered. I did consider an External, and even modifying the JSP or something, but I'm still left with either a very messy bunch of workflow and/or something that doesn't look right on the Mid-Tier. I may just have to do it old school and return a results list. Thanks, Joe. Rick On Tue, Sep 23, 2008 at 2:58 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: > ** > Thats true. I think it allows only a single selection. I wonder if there is > a RP to select the results of a query.. Just like the application delete RP > can delete the results of a query.. If not it might be a good RFE.. > > And your workaround for now could be a table with a dynamic external > qualification.. Not quite the look and feel of what you want to achieve > though.. > > Joe > > - Original Message > From: Rick Cook <[EMAIL PROTECTED]> > To: arslist@ARSLIST.ORG > Sent: Tuesday, September 23, 2008 5:25:48 PM > Subject: Re: Highlighting table field rows > > ** I was just looking at the APIs and RPs. The only problem with > PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be > an action to actually highlight the row in sequence, much less allow this > multiple times. > > Rick > > On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: > >> ** >> >> What about Perform-Action-Table-Select-Node >> >> >> >> Do not use the optional arguments Column number and flag.. >> >> >> >> Joe >> >> - Original Message >> From: Mark Milke <[EMAIL PROTECTED]> >> To: arslist@ARSLIST.ORG >> Sent: Tuesday, September 23, 2008 4:53:59 PM >> Subject: Re: Highlighting table field rows >> >> Rick, >> >> as far I'm concerned this is not possible via Workflow. You can highlight >> only one row at a time. >> The only idea that I haven't tested yet would be to press the Shift Key >> via OLE while making the loop. >> >> >> Mark >> >> On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: >> I have a table field on which I wish to hightlight only the selected rows >> that match a search field. >> >> The AL Guide is built, and the AL logs shows that it seems to be catching >> the correct records, but the rows aren't highlighting. What is the actual >> action in the AL to do that in the Guide? >> >> Rick >> > > __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" > html___ > ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
Thats true. I think it allows only a single selection. I wonder if there is a RP to select the results of a query.. Just like the application delete RP can delete the results of a query.. If not it might be a good RFE.. And your workaround for now could be a table with a dynamic external qualification.. Not quite the look and feel of what you want to achieve though.. Joe - Original Message From: Rick Cook <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 5:25:48 PM Subject: Re: Highlighting table field rows ** I was just looking at the APIs and RPs. The only problem with PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be an action to actually highlight the row in sequence, much less allow this multiple times. Rick On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: ** What about Perform-Action-Table-Select-Node Do not use the optional arguments Column number and flag.. Joe - Original Message From: Mark Milke <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 4:53:59 PM Subject: Re: Highlighting table field rows Rick, as far I'm concerned this is not possible via Workflow. You can highlight only one row at a time. The only idea that I haven't tested yet would be to press the Shift Key via OLE while making the loop. Mark On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: I have a table field on which I wish to hightlight only the selected rows that match a search field. The AL Guide is built, and the AL logs shows that it seems to be catching the correct records, but the rows aren't highlighting. What is the actual action in the AL to do that in the Guide? Rick ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
I was just looking at the APIs and RPs. The only problem with PERFORM-ACTION-TABLE-SELECT-NODE, is that there still doesn't appear to be an action to actually highlight the row in sequence, much less allow this multiple times. Rick On Tue, Sep 23, 2008 at 2:16 PM, Joe DeSouza <[EMAIL PROTECTED]> wrote: > ** > > What about Perform-Action-Table-Select-Node > > > > Do not use the optional arguments Column number and flag.. > > > > Joe > > - Original Message > From: Mark Milke <[EMAIL PROTECTED]> > To: arslist@ARSLIST.ORG > Sent: Tuesday, September 23, 2008 4:53:59 PM > Subject: Re: Highlighting table field rows > > Rick, > > as far I'm concerned this is not possible via Workflow. You can highlight > only one row at a time. > The only idea that I haven't tested yet would be to press the Shift Key via > OLE while making the loop. > > > Mark > > On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: > I have a table field on which I wish to hightlight only the selected rows > that match a search field. > > The AL Guide is built, and the AL logs shows that it seems to be catching > the correct records, but the rows aren't highlighting. What is the actual > action in the AL to do that in the Guide? > > Rick > > __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" > html___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
What about Perform-Action-Table-Select-Node Do not use the optional arguments Column number and flag.. Joe - Original Message From: Mark Milke <[EMAIL PROTECTED]> To: arslist@ARSLIST.ORG Sent: Tuesday, September 23, 2008 4:53:59 PM Subject: Re: Highlighting table field rows Rick, as far I'm concerned this is not possible via Workflow. You can highlight only one row at a time. The only idea that I haven't tested yet would be to press the Shift Key via OLE while making the loop. Mark On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: I have a table field on which I wish to hightlight only the selected rows that match a search field. The AL Guide is built, and the AL logs shows that it seems to be catching the correct records, but the rows aren't highlighting. What is the actual action in the AL to do that in the Guide? Rick ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Re: Highlighting table field rows
Rick, as far I'm concerned this is not possible via Workflow. You can highlight only one row at a time. The only idea that I haven't tested yet would be to press the Shift Key via OLE while making the loop. Mark On Sep 23, 10:47 pm, Rick Cook <[EMAIL PROTECTED]> wrote: > I have a table field on which I wish to hightlight only the selected rows > that match a search field. > > The AL Guide is built, and the AL logs shows that it seems to be catching > the correct records, but the rows aren't highlighting. What is the actual > action in the AL to do that in the Guide? > > Rick > > ___ > UNSUBSCRIBE or access ARSlist Archives atwww.arslist.org > Platinum Sponsor:www.rmsportal.comARSlist: "Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
Highlighting table field rows
I have a table field on which I wish to hightlight only the selected rows that match a search field. The AL Guide is built, and the AL logs shows that it seems to be catching the correct records, but the rows aren't highlighting. What is the actual action in the AL to do that in the Guide? Rick ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"