Re: [asterisk-users] Re: Loosing IAX connection between offices
I converted my connections from IAX to SIP and still having the same problem. I'm loosing connection between B and A. There is also an Office C. My problems seem to be with Office B. Now that I have switched to SIP, I still have the same problem when the IP address changes at Office C, Office B looses connection and can not be restablished with a SIP RELOAD. I think the problem is DNS related, either in Asterisk or the router. Though, this is getting above my head at this point. Can anyone point me in right direction? On 12/4/06, Louis-David Mitterrand <[EMAIL PROTECTED]> wrote: On Thu, Nov 30, 2006 at 08:52:50AM -0600, DM wrote: > Setup: > Office A: > router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv > Asterisk: v.1.2.4 > static IP > > Office B: > router: Linksys WRT54GL running Linksys firmware v4.30.2 > Asterisk: v.1.2.7.1 > dynamic IP (using dyndns name) > > Office A is set up with refresh dns and cron job for iax2 reload every > 5 minutes. It rarely looses connection to Office B. Short story: IAX is still crap in 1.2.13 (haven't tested 1.4), it's unreliable and perfectly good hosts will become UNREACHABLE for no apparent reason, while SIP connections keep going through. For trunking, avoid IAX and use SIP. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Polycom soft buttons not working
Anyone else have problems with soft buttons not being responsive at all? 2 of the 4 soft buttons do not respond, no matter how hard you push. It is an IP500. Well over 1 year old. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Loosing IAX connection between offices
On 11/30/06, Dave Fullerton <[EMAIL PROTECTED]> wrote: DM wrote: > Office A is set up with refresh dns and cron job for iax2 reload every > 5 minutes. It rarely looses connection to Office B. > > Surprisingly, Office B is the one loosing connection with Office A. > I'm surprised because Office A is the one with the static IP address. > When I do a IAX2 Show Peers, the connection will show as UNKNOWN or > UNAVAILABLE. After loosing connection, the only way I can get it to > reestablish is to reboot the * box. IAX2 reload doesn't solve it. I > haven't been able to establish if it loosing the connection at a > specific duration. Though, it seems to be random. Any reason you don't have Office B register with Office A and thereby tell Office A what IP office B has? It would remove the need to refresh DNS and reload IAX2 all the time. I use this method to connect my home system (dynamic) to my work system (static) and it works well. -Dave I assume you are referring to Method 3 listed here: http://www.voip-info.org/wiki/view/Asterisk+Connect+2+servers I'll have to give it a try. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Loosing IAX connection between offices
I assume you are referring to the 54GL in Office B? What about replacing the firmware with SVEASOFT or DDWRT? Would this fix it? On 11/30/06, jason <[EMAIL PROTECTED]> wrote: The linksys firmware on the WRT54G's on hardware versions 5 and above are notorious for layer 2 problems. Can you swap out that router? DM wrote: > Setup: > Office A: > router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv > Asterisk: v.1.2.4 > static IP > > Office B: > router: Linksys WRT54GL running Linksys firmware v4.30.2 > Asterisk: v.1.2.7.1 > dynamic IP (using dyndns name) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Loosing IAX connection between offices
Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing connection with Office A. I'm surprised because Office A is the one with the static IP address. When I do a IAX2 Show Peers, the connection will show as UNKNOWN or UNAVAILABLE. After loosing connection, the only way I can get it to reestablish is to reboot the * box. IAX2 reload doesn't solve it. I haven't been able to establish if it loosing the connection at a specific duration. Though, it seems to be random. iax.conf of Office B: [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw allow=alaw allow=gsm mailboxdetail=yes notransfer=yes ;(<- just added yesterday) [officeb-user] type=user secret= host= context=from-internal [officea] username=officea-user type=peer secret= qualify=4000 host= context=from-internal Any ideas on why Office B is loosing connection to Office A? or how to re-establish connection without rebooting? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Loosing IAX connection between offices
Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing connection with Office A. I'm surprised because Office A is the one with the static IP address. When I do a IAX2 Show Peers, the connection will show as UNKNOWN or UNAVAILABLE. After loosing connection, the only way I can get it to reestablish is to reboot the * box. IAX2 reload doesn't solve it. I haven't been able to establish if it loosing the connection at a specific duration. Though, it seems to be random. iax.conf of Office B: [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw allow=alaw allow=gsm mailboxdetail=yes notransfer=yes ;(<- just added yesterday) [officeb-user] type=user secret= host= context=from-internal [officea] username=officea-user type=peer secret= qualify=4000 host= context=from-internal Any ideas on why Office B is loosing connection to Office A? or how to re-establish connection without rebooting? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] VoicePulse Connect 4 Channel Limit?
voipstreet allows 20 concurrent calls. On 10/16/06, Nate Kapi <[EMAIL PROTECTED]> wrote: Does anyone know what happens if you try to have 5 concurrent outgoing channels with VoicePulse Connect? Does it give you an error message or a reorder or something? I'm worried about using them as my primary carrier if this is the case. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Polycom IP430 won't finish boot
On 8/21/06, Noah Miller <[EMAIL PROTECTED]> wrote: Hi Doug - One thing you could try that may or may not help: a different FTP server. I've been using ProFTPd (particularly because you can configure it to use the Polycom default username and password, so you don't have to manually type in those settings on each phone). If that doesn't do it, go for Polycom support. It sounds like you're doing everything according to their book, and it isn't working. If so, they should be the ones to fix it. - Noah ___ Why do you think the problem may be with the FTP server? I've been running vsftpd on several different systems, all with Polycom's. Doug ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Polycom IP430 won't finish boot
Let me start by saying when I first plugged it in, I didn't have the files set up on my ftp server yet, and the phone used it's default settings and it completed bootup. Now... I started with sip v1.6.6b and bootrom 3.1.3 on the ftp server. Phone boots, d/l's files, reaches "Welcome" screen and stops. After several minutes, it will reboot on it's own. So, I copied the v1.6.7 sip firmware using default files (sip.cfg, phone1.cfg ) and still doing same thing. Log from vsftpd log: Sun Aug 20 09:56:16 2006 4 192.168.1.102 2147768 /bootrom.ld b _ o r ftpperson ftp 0 * i Sun Aug 20 09:56:21 2006 1 192.168.1.102 372 /0004f205f5fe.cfg b _ o r ftpperson ftp 0 * c Sun Aug 20 09:56:21 2006 1 192.168.1.102 16060 /sip.ld b _ o r ftpperson ftp 0 * i Sun Aug 20 09:56:21 2006 1 192.168.1.102 8392 /phone1.cfg b _ o r ftpperson ftp 0 * c Sun Aug 20 09:56:22 2006 1 192.168.1.102 131423 /sip.cfg b _ o r ftpperson ftp 0 * c This repeats every time the phone boots. Log from phone boot log, note the compatible image error: 01|so |4|00|-- Initial log entry -- 01|so |4|00|+++ Note that bootrom log times are in GMT +++ 01|cfg |4|00|Initial log entry 01|copy |4|00|Initial log entry 01|so |3|00|No bitmapped font support in the image for display type 0x6. 0820073224|hw |4|00|Initial log entry. 0820073224|wdog |4|00|Initial log entry 0820073224|cdp |4|00|Initial log entry 0820073224|so |3|00|Platform: Model=SoundPoint IP 430, Assembly=2345-11402-001 Rev=A 0820073224|so |3|00|Platform: Board=2345-11402-001 1 0820073224|so |3|00|Platform: MAC=0004f205f5fe, IP=Unknown, Subnet Mask=Unknown 0820073224|so |3|00|Platform: BootBlock=2.7.0 (11402_001) 18-Apr-06 10:24 0820073224|so |3|00|Application, main: Label=BOOT, Version= 3.1.3.0154 18-Apr-06 09:30 0820073224|so |3|00|Application, main: P/N=3150-11069-313 0820073224|app1 |4|00|Initial log entry. 0820073225|so |3|00|Link status is Net up Speed 10 half Duplex, PC down. 0820073230|cdp |5|00|CDP is DISABLED. CDP not detected at boot. 0820073230|cdp |5|00|802.1Q/VLAN tagging is DISABLED. 0820073236|app1 |3|00|Using resolver server 1.2.3.4, alternate server 2.3.4.5, and domain zzz.rr.com. 0820073236|app1 |3|00|DHCP returned result 0x387 from server 192.168.1.10. 0820073236|app1 |3|00| Phone IP address is 192.168.1.102. 0820073236|app1 |3|00| Subnet mask is 255.255.255.0 . 0820073236|app1 |3|00| Gateway address is 192.168.1.10. 0820073236|app1 |3|00| DNS server is 1.2.3.4. 0820073236|app1 |3|00| DNS alternate server is 2.3.4.5. 0820073236|app1 |3|00| DNS domain is zzz.rr.com. 0820073236|app1 |3|00|Bootline: esw(3,0)bootHost:flash e=192.168.1.102:ff00:15180:a h= 192.168.1.20 g=192.168.1.10 u=ftpperson pw= f=0x40 tn=Circ 0820073236|app1 |3|00|Bootline: aIP 0820073237|cfg |3|00|New load header information: 0820073237|cfg |3|00|Code length: 0x00068ACD 0820073237|cfg |3|00|Header check Sum:0x250257D8 0820073237|cfg |3|00|Code check Sum: 0x037BCB0B 0820073237|cfg |3|00|Options: 0x0010 0820073238|cfg |3|00|New load header information: 0820073238|cfg |3|00|Code length: 0x0005FBAD 0820073238|cfg |3|00|Header check Sum:0x24B7899B 0820073238|cfg |3|00|Code check Sum: 0x03318BF6 0820073238|cfg |3|00|Options: 0x0010 0820073238|cfg |3|00|New load header information: 0820073238|cfg |3|00|Code length: 0x0005FC35 0820073238|cfg |3|00|Header check Sum:0x24B7D290 0820073238|cfg |3|00|Code check Sum: 0x0331D463 0820073238|cfg |3|00|Options: 0x0010 0820073239|cfg |3|00|New load header information: 0820073239|cfg |3|00|Code length: 0x00067DF9 0820073239|cfg |3|00|Header check Sum:0x24FB885F 0820073239|cfg |3|00|Code check Sum: 0x0375086A 0820073239|cfg |3|00|Options: 0x0010 0820073240|cfg |3|00|New load header information: 0820073240|cfg |3|00|Code length: 0x00074D2A 0820073240|cfg |3|00|Header check Sum:0x055436A3 0820073240|cfg |3|00|Code check Sum: 0x03DCE771 0820073240|cfg |3|00|Options: 0x0010 0820073241|cfg |3|00|New load header information: 0820073241|cfg |3|00|Code length: 0x0005F99D 0820073241|cfg |3|00|Header check Sum:0x24B691EC 0820073241|cfg |3|00|Code check Sum: 0x03309653 0820073241|cfg |3|00|Options: 0x0010 0820073241|cfg |5|00|Error: file does not contain a compatible image. <- 0820073241|cfg |5|00| Compatiblity for image 0 is 0x11410. 0820073241|cfg |5|00| Compatiblity for image 1 is 0x11414. 0820073241|cfg |5|00| Compatiblity for image 2 is 0x11414. 0820073241|cfg |5|00| Compatiblity for image 3 is 0x11410. 0820073241|cfg |5|00| Compatiblity for image 4 is 0x11410. 0820073241|cfg |5|00| Compatiblity for image 5 is 0x11414. 0820073241|cfg |3|00|Image sip.ld has not changed. 0820073244|app1 |4|00|Loaded application sip.ld successfully, error
Re: [asterisk-users] IAX trunk behing NAT with dynamic IP
If that doesn't work, the OP can set up a cron job to do a IAX2 Reload every 5 minutes like I did. I have the exact same problem. I hope the OP reports back if that works, because I would rather add the host statement than run a cron job every 5 minutes. On 8/8/06, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: Set the host=dynamic on serverA, and let the serverB register with serverA Jon ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] VOIP phone for Receptionist use
By default, CW is turned off in AAH. You need to turn it on. I use the 301, 500, 501, 600, and 601. CW works w/ AAH and Trixbox. You should visit http://www.trixbox.org/index.php if you are using AAH or Trixbox. On 8/1/06, Jeff Busch <[EMAIL PROTECTED]> wrote: I've searched through the newsgroup and online and haven't found an answer for my question... maybe I am looking for the wrong terms, I am not sure... I have a client that would like a phone that is like a "typical" receptionists phone. Requirements: - Ability for their 3 lines to "light-up" a button on the phone when one of them rings in. - Ability for the phone to ring when the receptionist is on one call and a second or third call is incoming. (this has been the biggest frustration up to now. When a second call comes, there is no tone that heard on the IP500. Perhaps I am missing a setting?) We are currently using: Asterisk @ Home 2.1 Polycom IP500/501 phones Is there a way to do what we need to using the IP500 phones? If so, can anyone give me instructions on how to make it work with [EMAIL PROTECTED] Thanks for your help in advance. Jeff ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
