[Asterisk-Users] digitnetworks card issues?
Hi,
I've purchased two x100p clones, and when I try accessing a line
from asterisk with something like this:
exten = _1NXXNXX,1,Dial(Zap/2/{$EXTEN})
(is that only supposed to put you on channel 2 or actually dial the #
for you?)
but I first hear noise, then a dial tone, but as soon as I start dialing
numbers I get feedback and noise, and the call doesn't go through.
Any suggestions?
Thanks,
Imran
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] digitnetworks card issues?
Didn't want to start a flamewar here... but anyway, could the issue be
that both fxo cards are on IRQ 11? How do I even change that?
Thanks
William Suffill wrote:
Digitnetworks is profiting off the cards so they should support them.
If it wasn't for Digium there wouldn't be Asterisk anyway. So doesn't
that make it better to support the primary company for software that
many of you use every day at home and work?
On Fri, 3 Sep 2004 08:40:59 +0100, Kannaiyan Natesan
[EMAIL PROTECTED] wrote:
Does it mean that we cannot talk about Cisco or other FXS products since
IAXy is released??
I hope this list for every member who uses asterisk not Digium's products
users alone.
- Original Message -
From: Jay Milk [EMAIL PROTECTED]
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
[EMAIL PROTECTED]
Sent: Friday, September 03, 2004 8:09 AM
Subject: RE: [Asterisk-Users] digitnetworks card issues?
Have you contacted digitnetworks for support? This list is owned and
maintained by Digium, who already gave you Asterisk for free. Probably
not the best forum to ask for support for a competitive product here.
-Original Message-
From: Imran Akbar [mailto:[EMAIL PROTECTED]
Sent: Friday, September 03, 2004 1:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] digitnetworks card issues?
Hi,
I've purchased two x100p clones, and when I try accessing a line
from asterisk with something like this:
exten = _1NXXNXX,1,Dial(Zap/2/{$EXTEN})
(is that only supposed to put you on channel 2 or actually dial the #
for you?)
but I first hear noise, then a dial tone, but as soon as I
start dialing
numbers I get feedback and noise, and the call doesn't go through.
Any suggestions?
Thanks,
Imran
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] no dial tone when dialing out on vonage
Hi,
I'm trying to dial out on a vonage line connected to a zap channel
using stuff like:
exten = 200,1,Dial(Zap/2/${EXTEN})
but it doesn't work - when i dial in the extension, i can see on a phone
connected to the same line that it's gone active - but there's no
dialtone. also tried adding a wait period before accessing the line and
exten = _XX,1,Dial(Zap/2/${EXTEN})
to no avail.
what's goin on?
Thanks,
Imran
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] line feedback, no dial tone
Hi, after following up on my previous email about zaptel x100p having trouble accessing a vonage dial tone, I think the problem is with feedback and noise on the line - any remedies for this? Thanks, Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] international caller id support
Hi, I was wondering if anyone knows where i can find out the standards used by telco's in different countries... and how to configure asterisk to support them. Secondly, whenever i try Dialing a zap channel, all i get is no sound on the phone source, and noise on the destination line. thanks Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] transferring call to another line
Hi, I just got my zaptel fxo cards working, and I want to be able to have someone call in on one line and access the other - I guess what I want to do is transfer(exten), but that is only for extensions - not channels which is what I want i guess. I tried the Dial(Zap/2) but I think that's for ringing that line (fxs)? thanks Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] extensions = s,1,Dial(Zap/2/number) noise
Hi, I'm trying to answer a call on one line and dial out a number on a zaptel x100p fxo, but all I get from the phone I'm dialing is silence after it is picked up, and on the line that's supposed to be dialed out itself, noise. Thanks, Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Re: zaptel configuration
Asalamualaikum Atif, i saw your guy's ad in spider magazine. sounds cool... yeah, i got asterisk to work, i had to build zaptel before asterisk. just trying to transfer from one line to another now... thanks Imran Atif Rasheed wrote: well Imran, I am not a guru of Asterisk, but I think my suggestions might work, Hi, I've been trying to get my zaptel x100p cards working for the past week now. this is what I've done: first, this should have been done with Zaptel, not asterisk install Zaptel, like this: make clean make linux26 (if kernel version is 2.6 or above, else do 'make' only) make install installed asterisk: make clean make linux 26 (for fedora core 2) make install and, this should have been done for Asterisk i.e. install Asterisk, like: make clean make make install installed zaptel: make clean make make install then do 'modprobe's', 'ztcfg -v', and then do 'asterisk -vvc' then check for errors, if any did a modprobe zaptel, and wcfxo got this in /var/log/messages: PCI: found IRQ 11 for device :00:0f.0 wcfxo: daa mode is 'FCC' found a wildcard fxo: wildcard x101p ... in zaptel.conf: fxsks=1-2 in zapata.conf: signalling = fxs_ks channel = 1 channel = 2 yet when i run asterisk, the zap show channels command doesn't work. in a previous thread they mentioned this is because some chan_zap.so file isn't loaded because of the zaptel installation. I was told I had to REINSTALL asterisk after the zaptel stuff, which again didn't do anything. How can this be so hard to even get installed? Thanks, Imran hope, it will work this time. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Dial/Zap doesn't work
Hi, I'm trying to dial in from one phone and give it access to another line (ie incoming on zap/1 and outgoing on zap/2)... how can I transfer the call from channel 1 and give it the dial tone on channel 2? I can use dial but that takes a phone number, which I want the user to be able to select. thanks Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] zaptel configuration
Hi, I've been trying to get my zaptel x100p cards working for the past week now. this is what I've done: installed asterisk: make clean make linux 26 (for fedora core 2) make install installed zaptel: make clean make make install did a modprobe zaptel, and wcfxo got this in /var/log/messages: PCI: found IRQ 11 for device :00:0f.0 wcfxo: daa mode is 'FCC' found a wildcard fxo: wildcard x101p ... in zaptel.conf: fxsks=1-2 in zapata.conf: signalling = fxs_ks channel = 1 channel = 2 yet when i run asterisk, the zap show channels command doesn't work. in a previous thread they mentioned this is because some chan_zap.so file isn't loaded because of the zaptel installation. I was told I had to REINSTALL asterisk after the zaptel stuff, which again didn't do anything. How can this be so hard to even get installed? Thanks, Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] zap show channels - no such command
dmesg: Zapata Telephony Interface Registered on major 196 ... pci: fOUND irq 11 for device 00 wcfxo: daa mode is 'FCC' Found a wildcard fxo: wildcard x101p PCI: found iraq 11 for device pci: sharing irq 11 with 0 wcfxo: DAA modeis 'FCC' Found a Wildcard FXO: Wildcard X101p that's for two FXO cards. Thanks el Flynn wrote: Imran Akbar wrote: edited the zaptel.conf, zapata.conf, extensions.conf to proper settings. added chan_zap.so to modules.conf, when asterisk starts up it can't find it. Why don't you post a snippet of the zaptel stuff as reported by dmesg? That may help. Flynn ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] zap show channels - no such command
wo, i have to rebuild asterisk after i install zaptel? where did that come from? let me try... thanks Imran Darryl Ross wrote: Hi Imran, I seem to have done the zaptel installation - what am I missing - i still don't have a chan_zap.so file? Did you rebuild Asterisk after installing Zaptel? chan_zap.so is built as part of the actually Asterisk build, AFAIK. added chan_zap.so to modules.conf, when asterisk starts up it can't find it. If you don't have Zaptel installed when you build Asterisk, it might not build chan_zap.so. On my system the asterisk modules are in /usr/lib/asterisk/modules/. Regards Darryl ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] zap show channels - no such command
Tried recompiling asterisk after the zaptel installation... still don't have a chan_zap.so file. help anyone? Thanks, Imran Imran Akbar wrote: wo, i have to rebuild asterisk after i install zaptel? where did that come from? let me try... thanks Imran Darryl Ross wrote: Hi Imran, I seem to have done the zaptel installation - what am I missing - i still don't have a chan_zap.so file? Did you rebuild Asterisk after installing Zaptel? chan_zap.so is built as part of the actually Asterisk build, AFAIK. added chan_zap.so to modules.conf, when asterisk starts up it can't find it. If you don't have Zaptel installed when you build Asterisk, it might not build chan_zap.so. On my system the asterisk modules are in /usr/lib/asterisk/modules/. Regards Darryl ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] zaptel installation
Hi, the problems i previously had with zap show channels seems to be from an incorrect zaptel installation which is why I don't have a chan_zap.so file. I compile and do a make clean, make, make install of zaptel and do my modprobe's, and I was told to reinstall asterisk after that. I do so however, but it makes no difference. any hints? thanks Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] zap show channels - no such command
Hi, in response to a previous posting regarding getting the x100p to work, I was told to run zap show channels, but when i do i get no such command 'zap' There was a previous posting on this, but the guy never posted the solution. thanks, Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] zap show channels - no such command
Thanks Jeremy, but how exactly do I load chan_zap.so? I put it into my modules.conf, but when i run asterisk now it says it can't find it (loading module zap_chan.so failed). It doesn't seem to be on my system... thanks imran Jeremy McNamara wrote: Imran Akbar wrote: Hi, in response to a previous posting regarding getting the x100p to work, I was told to run zap show channels, but when i do i get no such command 'zap' There was a previous posting on this, but the guy never posted the solution. chan_zap.so is not loaded. Jeremy McNamara ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] zap show channels - no such command
to the best of my knowledge, i have, but i'm redoing it. i'm looking at the instructions at http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation is that the best guide? thanks Imran Jeremy McNamara wrote: Imran Akbar wrote: Thanks Jeremy, but how exactly do I load chan_zap.so? I put it into my modules.conf, but when i run asterisk now it says it can't find it (loading module zap_chan.so failed). It doesn't seem to be on my system... Have you compiled, installed and configured Zaptel? Jeremy McNamara ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] zap show channels - no such command
sorry, my bad. typo in the email, but it was correct in modules.conf. Im trying to reinstall the zaptel stuff, but i'm not seeing anything in var/log/messages after doing my modprobe's? Thanks Jon Radon wrote: It should be chan_zap.so not zap_chan.so. Imran Akbar wrote: Thanks Jeremy, but how exactly do I load chan_zap.so? I put it into my modules.conf, but when i run asterisk now it says it can't find it (loading module zap_chan.so failed). It doesn't seem to be on my system... ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] zap show channels - no such command
Thanks, I seem to have done the zaptel installation - what am I missing - i still don't have a chan_zap.so file? in my zaptel directory: make clean make make install modprobe zaptel modprobe wcfxo got stuff in dmesg did a make config in the zaptel directory edited the zaptel.conf, zapata.conf, extensions.conf to proper settings. added chan_zap.so to modules.conf, when asterisk starts up it can't find it. Thanks, Imran el Flynn wrote: Imran Akbar wrote: sorry, my bad. typo in the email, but it was correct in modules.conf. Im trying to reinstall the zaptel stuff, but i'm not seeing anything in var/log/messages after doing my modprobe's? Thanks try running the dmesg command - the digium stuff appears there instead of /var/log/messages on my system. Flynn ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] zaptel config
Hi, Sorry, in my last mail I wrote wcfxs instead of what I actually used, wcfxo. I just got two digium x100p clones and installed asterisk on fedora core 2 which took some tweaking. After getting asterisk up I installed the zaptel stuff - then modprobed zaptel, wcfxo, which worked fine. ztcfg is showing two channels configured, but when I start asterisk and do show channels, i see no active channels. zapata.conf has: signalling = fxs_ks context = line1 channel = 1 signalling = fxs_ks context = line1 channel = 2 zaptel.conf has: loadzone=us defaultzone=us fxsks=1-2 extensions.conf has: [line1] exten = s,1,Answer exten = s,2,DigitTimeout,5 exten = s,3,ResponseTimeout,10 exten = s,4,BackGround(demo-congrats) exten = s,5,BackGround(demo-instruct) [line2] exten = s,1,Answer exten = s,2,DigitTimeout,5 exten = s,3,ResponseTimeout,10 exten = s,4,BackGround(demo-congrats) exten = s,5,BackGround(demo-instruct) I have no idea why it's not working would appreciate any help Thanks, Imran ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
