Re: [Asterisk-Users] Via Epia
>Does anyone has some experience in installing * on Via Epia. I am >struggling with it for about two days. And when I finally managed to >install asterisk 1.0.9 after starting it I get this error or whatever: > >- > Illegal instruction > >I changed the variable in makefile to i586 (I also tried i686 because >that is what my uname - m says) but still I get the same problem. > >I use Debian with 2.4.30 kernel. > >Does anyone has some experience with Via Epia and Asterisk. Will this >mix work in appropriate way ;) ? > There is not only 1 makefile where you have to define i586. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Which PRI card for EuroISDN ?
I wonder which PRI interface card is most stable and supported for EuroISDN and Asterisk ? Are they stable enough ? Any tips ? Sangoma cards have _very_good_support. You can use them for many different solutions, not only voice :) I use them. Maciej Kietlinski ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] What quad/octo BRI cards are best/stable for EuroISDN and Asterisk ?
I'm currently deciding on what card to pruchase for octo/quad BRI card to use with Asterisk on EuroISDN lines. I'm aware of at least two options (Junghanns or Beronet), but don't know how stable and well supported they are. Which ones are better supported ? Any experiences? Any advice ? How tos ? Using Junghanns you can have support. Maciej Kietlinski ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 1.0.3-BRIstuffed
Corvin wrote: Heh, that is problem I've compilled bristuff, launch make load for TE mode. I also added to modules.conf load => chan_zap.so and nothing happens. I can dial on s extension, with i4l and chan_capi but not with chan_zap. I've hear that this channel is good about echo, so I wan't to try. i4l causes a lot o echo and pure quality, chan_capi better quality but I can't attach more than one msn to card. You can. About your problem with bristuff, you don't give enough info to help you. Can you dial out with bri ? kietlak ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN CARD
Bostjan Repnik wrote: Im looking for a ISDN card that works under asterisk and supports BRI line. And I just can`t findit. Momently im using card INTERNAL, but Im having problems, asterisk on startup when loading modem fails (i4l driver). Can you please help me, or point to a www address where culd I find some help. http://www.voip-info.org/wiki-Asterisk+Hardware ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN-Problem with Quadbri behind Tenovis
> We try to establish a * voicemail system behind a Tenovis (soon to be avaya) Integral 55 with Junghanns quadbri card in the * server. > The Tenovis has 4 bri ports configured in nt ptp (edsi 61) which we connected to the quadbri (te, ptp) card. > > Signaling in one direction seems to work as the asterisk receives a call and seems to answer, but the Tenovis pbx never understands this and switches to 'unreachable' after a short while of ringing. > Also, dialing out from an iax-phone via the zap channel results in a ringing signalled in the iax phone but no traffic to the Tenovis (level 2 indicator is alight in tenovis, but d-channel indicator stays dark). > > We use the bri-stuff-0.1.0-rc4a package from junghanns.net which means asterisk CVS-HEAD-08/13/04. > > The error asterisk shows when Tenovis dials in: > > -- Executing Answer("Zap/2-1", "") in new stack > -- Accepting call from '7219206012' to '6951' on channel 0/2, span 1 > -- Executing MP3Player("Zap/2-1", "/usr/share/asterisk/sounds/pioneer.mp3") in new stack > Oct 27 19:45:34 WARNING[1088519088]: chan_zap.c:6902 zt_pri_error: PRI: XXX Missing handling for mandatory IE 8 (cs0, Cause) XXX > Oct 27 19:45:34 WARNING[1088519088]: chan_zap.c:8128 pri_dchannel: Hangup REQ requested on unconfigured channel 255/255 span 1 > Oct 27 19:45:34 WARNING[1088519088]: chan_zap.c:8061 pri_dchannel: Hangup requested on unconfigured channel 255/255 span 1 > Oct 27 19:45:39 WARNING[1088519088]: chan_zap.c:8061 pri_dchannel: Hangup requested on unconfigured channel 255/255 span 1 > > > Any clues to what happens here? > Seems the communication asterisk=>Tenovis does not work. And why is the cause not handled in chan_zap? > Send your zaptel.conf and ANZG output from AOGD. kietlak ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM400P lockups (FXO)
>> >> Are the FXOs on the 2x on ports 1-2 or 3-4? Maybe it has to >> do with *any* FXO on port 1... >> >> Please get back with the list with your findings. >> > > >My experience led to a replacement from Digium, but the card is a >TDM400P with 4 FXO...now that I think of it, during troubleshooting >there was some correlation to the first port on the card (port 1)...not >the first module - I swapped module positions to varying locations on >the card without success, but then again they are all FXO...Maybe *is* >possible that the TDM400P doesn't like an FXO module in port 1 as you >are suggesting...Like I said, in the end I got a new revision board from >digium, all 4 ports are still FXO and working great now... > With my old revision TDM400P it was the same problem with FXO on port 1. Easiest way for me was to put FXO's on new revision card, and on old use FXS on port 1. I used info from post with: 'The card had been modified, evident from the jumper wire that been soldered between two points on the back of the card. I haven't had problems since installing the new card.' And before old card was used with FXS + 3 x FXO without problems, so it works in the same hw conf again. Now I heve no problems with TDMxxp Maciej Kietlinski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk Install on Kernel 2.6.x
> i know asterisk itself will install on a linux kernel 2.6.x, but i've > seen places say that the zaptel drivers wont? is this still true? is > it possible to build asterisk/zaptel on a linux 2.6.x kernel? Yes, it works on 2.6.x. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] How to run qozap with wcfxo and wsfxs together?
I try to run QuadBRI wih X100P and TDM 4xxP. When I run them separate (ISDN or analog), they work, but together they load with no error messages (when ISDN is loaded first), but phones conected to interfaces are 'dead'. How to solve this? Maciej Kielinski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Eicon Diva 2.0 PCI ISDN Card
> Does anyone have this card working with Asterisk? Yes kietlak ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk & DECT
> Does anybody have already use TEDAS VoIP DECT PABX or some Kirk hardware > to integrate DECT to VoIP? I've tried integrate Kirk, but with no special success. There was any codec problem, so it was only 'one way voice' integrated. I'v tried only with skinny and with standard Kirk configuration. kietlak ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN BRI with DDI support
> > > I want to build in my small company little PBX with asterisk. > > > I have one ISDN BRI link with DDI preselection and a couple of analog > > > phones. > > > > > > So, my problem is, I'm lost in lots of abbreviations, and I have no idea > > > which pci card to select. > > > > > > I know, I need one ISDN BRI DDI card for incoming isdn line > > > and some pci cards with RJ11 for analog phones. > > > > > > 1) can anybody help me to select correct pci cards? > > > 2) can i use more then one isdn cards (connected together) if I need > > > more the 2 simultaneous phone calls? > > > > For phones: Digium TDM?0B, > > For line(s): Eicon Diva Server - with 1 or 4 BRI interfaces. > and what about "AVM FRITZ! card PCI v 2.0" or "AVM ISDN controller C2" ? > what does it mean active vs. pasive controller, where is difference? > Am I need active controller? Active controller has its processor - in Asterisk solutions you usually don't need this. About C2 - I didn't try. About fritz: Old cards were supported by isdn4linux, not new (If I remember well old is 2.0, new 2.1). With new you can use only CAPI. CAPI from AVM legally supports only 1 card in 1 PC. And I coundn't make it stable for many days - with Eicon not any problem. I am afraid that Fritz dosn't support point-to-point mode - but I am not sure. Maciej Kietlinski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN BRI with DDI support
> I want to build in my small company little PBX with asterisk. > I have one ISDN BRI link with DDI preselection and a couple of analog > phones. > > I need somethink like this > >+--+--- phone 1 (extension 1) >| LINUX with ASTERISK +--- phone 2 (extension 2) >| | > ISDN BRI DDI | +--- phone 3 (extension 3) > ---+ | >| +--- phone 4 (extension 4) >| | >+--+--- phone 5 (extension 5) > > > So, my problem is, I'm lost in lots of abbreviations, and I have no idea > which pci card to select. > > I know, I need one ISDN BRI DDI card for incoming isdn line > and some pci cards with RJ11 for analog phones. > > 1) can anybody help me to select correct pci cards? > 2) can i use more then one isdn cards (connected together) if I need > more the 2 simultaneous phone calls? For phones: Digium TDM?0B, For line(s): Eicon Diva Server - with 1 or 4 BRI interfaces. Maciej Kietlinski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Flash to PBX with X100P - how to?
Hi everyone, I have X100P connected to internal line of my Tenovis PBX. I try to use * as simple DISA box. When I have a call on this line, after user selects extension, I want * to flash a line (to put on hold on Tenovis) and then call selected extension. Problem is that I cannot make Flash to work properly. I have: exten => 60,1,Flash exten => 60,2,Wait,2 . log is: -- Executing Flash("Zap/1-1", "") in new stack -- Flashed channel Zap/1-1 -- Executing Wait("Zap/1-1", "5") in new stack After Flash my connection is lost. I've already tried with different flash duration option in Tenovis, but always is the same. I've also tried to play with 'flash' option in zapata.conf. What do I make wrong? Maciej Kietlinski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] CAPI not installed, after changed from i4l to CAPI
> I had unexpected hangups from my asterix box using the i4l driver. (SIP > <-> SIP calls worked execellent, but SIP<->ISDN didn't.) > > Then I changed the i4l driver in modem.conf with the chan_capi from > jungham. (http://www.junghanns.net/asterisk) > > I followed his instructions in the INSTALL file, and first encountered > some errors compiling it. It help by deinstalling several isdn4linux > packages (se bottom for full info) and install the capi libraries. What is your ISDN card? Installing CAPI be sure to read HOWTO for your ISDN hardware. Maciej Kietlinski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk IVR and Hicom 300
>> in our public hospital we have 3 hicom 300. We now would like to have IVR. >> Is it possible to use Asterisk togheter with the hicom as IVR ? >> What hardware do we need to connect the Asterisk server with the Hicom ? is ISDN >> enough ? > >if your Hicom offers internal S0 (isdn) to connect isdn phones >then you can just take a passive AVM Fritz Card and connect it >to the Hicom. Is it possible to forward call to any hicom extension after IVR session ? If yes, how to do it ? Maciej Kietlinski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users