Re: [Asterisk-Users] Bristuff ZapHFC and Loosing D-Channel
Hi This is normal behaviour if you are running isdn in PTMP mode, at least in sweden. It is bothering with these messages, but I'we been running my test site with two PTMP lines for months and everything worked fine. It is said that some operators keep trying to turn off the D-channel in PTMP-mode. But asteriskt keeps trying to turn it on. This is usually no problem. If you can't recceive calls, my exeprience is that there is some problem with the msn that is set on the line. /Nils On Tue, 25 Jan 2005, Peer Oliver Schmidt wrote: Using the latest(?) bristuff (Asterisk 1.0.4-BRIstuffed-0.2.0-RC3a) I have problems with loosing the D-channel. Most of the time, after the message PRI D-channel down it only takes a second or so to come back up, noted by the message PRI D-channel up However, today most of the time the D-channel stays down. Calls come in, but can't be answered. Does anyone know of a fix for this, or might have some insights on how to circumvent this problem? Any and all help is greatly appreciated. -- Best regards Peer Oliver Schmidt ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Jan 27 Grissom, White and Chaffe burned to death in Apollo 1, 1967 Jan 27 Vietnam War cease-fire signed, 1973 Jan 28 First ski tow, Woodstock VT, 1914 Jan 28 Space Shuttle Challenger (51-L) explodes 74 seconds after liftoff killing Scobee, Smith, McNair, Resnick, Jarvis, Onizuka and McAuliffe, 1986 --- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Florz patch for zaphfc
Ivan Meic (Vox Mundi) wrote: Stuart, Can you plase specify in which mode are you using your hfc cards ? You said ptp, but are they working as NT or TE ? Ivan, I'm using the hfc cards in ptp mode connected to the pstn in TE-mode. During testing we used the same setup on a different isdn-line in ptmp mode witch equally good results. When we switched to the lines used by our old alcatel pbx I had wery strange problems until I realised that those lines where in PTP mode. /Nils Thanks, Ivan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Stuart Hirst Sent: Wednesday, January 26, 2005 12:26 AM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Florz patch for zaphfc Nils, Thanks for your help with this issue and I thought I should send this to the list for the benefit of others. The issue was with the options piping through patch. The command I used was zcat /path/zaphfc_0.2.0-rc2b_florz-1.diff.gz | patch which worked fine. Notice no p1 option. The feedback from the customer is that the audio quality has improved 100% and they are now happy. I cannot find any errors from Asterisk or the system logs and so this patch from Florz seems to be good and stable. Thanks Florz. It is that good that where I have a 4 port BRI card from Junghanns in a site that is giving me major problems with framing errors where I am using three of the ports, I am going to install 3 Billion cards using zaphfc and the Florz patch to try and get around the problem because the framing error problems with the 4 port card is taking forever to resolve. Thanks again Nils for your help and Florz for a great patch. Rgds, Stuart -Original Message- From: Nils Segerdahl [mailto:[EMAIL PROTECTED] Sent: 23 January 2005 21:05 To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Florz patch for zaphfc On Sun, 23 Jan 2005, Stuart Hirst wrote: Has anyone had any success using the Florz patch for zaphfc ? I have a * system with 2 HFC cards which is working fine with 2 PTP ISDN lines however the users are complaining of crackles on the line which I am assuming is related to the IRQ issues raised by Florz. I have tried to use the patch but it errors trying to patch zaphfc.h Any help would be appreciated. Im running bristuff-0.2.0-rc2b with Florians patch. 4 Billion hfc cards in ptp mode. Works like a charm. Even spandsp for receiving faxes works. Pelase describe your problem in more detail. /Nils Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Jan 24 Eskimo Pie patented by Christian Nelson, 1922 Jan 24 Gold discovered in California at Sutter's Mill, 1848 Jan 24 DG Nova introduced, 1969 --- -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 21/01/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 21/01/2005 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Nils Segerdahl Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Upsala Science Park, 751 83 Upsala Mobil: (+46) (0)703 55 65 03 http://www.upsys.se Fax: (+46) (0)18 56 80 49 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Florz patch for zaphfc
On Sun, 23 Jan 2005, Stuart Hirst wrote: Has anyone had any success using the Florz patch for zaphfc ? I have a * system with 2 HFC cards which is working fine with 2 PTP ISDN lines however the users are complaining of crackles on the line which I am assuming is related to the IRQ issues raised by Florz. I have tried to use the patch but it errors trying to patch zaphfc.h Any help would be appreciated. Im running bristuff-0.2.0-rc2b with Florians patch. 4 Billion hfc cards in ptp mode. Works like a charm. Even spandsp for receiving faxes works. Pelase describe your problem in more detail. /Nils Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Jan 24 Eskimo Pie patented by Christian Nelson, 1922 Jan 24 Gold discovered in California at Sutter's Mill, 1848 Jan 24 DG Nova introduced, 1969 --- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] fax e-mail spandsp
Matt Riddell wrote: Brian Dingman wrote: Anyone care to pass on a makefile that works. This is what my makefile.rej looks like: [SNIPPED] Really it's not that hard. Open two console windows. In one open that patch. In the other open the Makefile. If you look at the patch you can see what lines need to go into the Makefile and where. (the + symbol means add this line, and the lines without +'s show what is before and after the section you need to change). If you have any problems, drop me a line off-list and I'll help you out (but it's worth your while to at least have a try). Hi, Remember that make requires that the indentation in the Makefile is done with tab and not spaces. I you cut and paste there is a risk that the indentation is converted to spaces. /Nils -- Nils Segerdahl Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Upsala Science Park, 751 83 Upsala Mobil: (+46) (0)703 55 65 03 http://www.upsys.se Fax: (+46) (0)18 56 80 49 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] spandsp and app_rxfax (alternative topic: t38modem)
On Fri, 7 Jan 2005, Ryan wrote: H. Did I just ask in the wrong forum, or has _nobody_ experienced image corruption using app_rxfax that was NOT due to using the wrong version of libtiff? Hello Ryan, I have. There was a discussion on this list a short while ago on howto debug frameslips. I think you could find useful information in that thread. I had the same problems using hfc cards with bristuff. (with patched zaptel drivers). When I applied Florian Zumbiehls patch the problem went away. (The link to the patch can be found in the wiki: asterisk zaphfc) Is it a possibility that there is a problem with interrupt handling in the zaptel driver for other cards as well? /Nils If that's the case, then my secondary approach is going to have to be: PSTN - Asterisk + chan_h323 - t38modem + Hylafax Is there anybody that could help me with either of these solutions? A thousand thank yous in advance, Ryan VanMiddlesworth On Thursday, January 6th, I wrote: I've been pulling my hair out trying to get Asterisk to receive and decode a fax using spandsp and app_rxfax. It seems like it should be working. The fax machine on the other end connects and Asterisk reports a fax coming in. But when it's done all I have is a 2 or 3 KB TIF (see attachment). The console activity looks completely normal: -- Starting simple switch on 'Zap/3-1' -- Executing SetVar(Zap/3-1, FAXFILE=/var/spool/asterisk/fax/1105043880.0.tif) in new stack -- Executing RxFAX(Zap/3-1, /var/spool/asterisk/fax/1105043880.0.tif) in new stack -- Hungup 'Zap/3-1' And there are no errors in the log file. Here's my config: Wildcard TDM40B hardware (Zaptel) asterisk-1.0.2 spandsp-0.0.2pre6 libtiff-3.6.1 (with the fax fix patches) (also tried libtiff-3.6.0 and libtiff-3.5.7) I've tried multiple sending fax machines and get the same effect. Any tips on getting this setup working? I've run out of ideas. Alternately, I'd also be willing to offload the DSP processing to a HylaFAX machine using some sort of software fax driver. I tinkered with t38modem and chan_h323, but couldn't get it to do anything once the HylaFAX machine answered. So if anybody has any experience with that, I'd be interested. Thanks in advance, Ryan VanMiddlesworth ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Jan 8 Battle of New Orleans Jan 9 Fellowship reaches Lorien (LOTR) Jan 9 Plough Monday Jan 10 First meeting of United Nations General Assembly in London, 1946 Jan 10 Thomas Paine's Common Sense published, 1776 Jan 8 American Telephone and Telegraph loses antitrust case, 1982 Jan 8 Herman Hollerith patents first data processing computer, 1889 Jan 8 Justice Dept. drops IBM suit, 1982 Jan 10 First CDC 1604 delivered to Navy, 1960 --- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] spandsp and app_rxfax (alternative topic:t38modem)
On Sat, 8 Jan 2005, Steve Underwood wrote: Ryan wrote: On Friday 07 January 2005 01:35 pm, Lee Howard wrote: Just to be clear. What I am getting is about the top inch of the fax and that's all. The total size of the TIFF is ALWAYS about 3KB or less. If your TIFF are consistently that small you probably have a TIFF library problem. Frame slips generally give much more eratic results. If you believe you have a good version of the TIFF library on your machine, check you don't have any others. A *lot* of people have told me they had a good TIFF library, and later found they also have one or more bad ones too. :-) I had exactly the same problem. The faxes received was about 2 inches then stop. Same result all the time. libtiff 3.5.7, 3.6.0, 3.6.1, 3.7.1 all the same. Kernel 2.4.27 No change with 2.6.7 I suspected frame slips. But sound quality was ok. Everything was ok. Except maybe to many interrupts on the line cards. But when I changed my devicedriver to one that was more safe regarding lost interrupts it worked like a charm. /Nils Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Jan 8 Battle of New Orleans Jan 9 Fellowship reaches Lorien (LOTR) Jan 9 Plough Monday Jan 10 First meeting of United Nations General Assembly in London, 1946 Jan 10 Thomas Paine's Common Sense published, 1776 Jan 8 American Telephone and Telegraph loses antitrust case, 1982 Jan 8 Herman Hollerith patents first data processing computer, 1889 Jan 8 Justice Dept. drops IBM suit, 1982 Jan 10 First CDC 1604 delivered to Navy, 1960 --- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] spandsp and app_rxfax (alternative topic:t38modem)
On Fri, 7 Jan 2005, Michael Welter wrote: Nils Segerdahl wrote: I suspected frame slips. But sound quality was ok. Everything was ok. Except maybe to many interrupts on the line cards. But when I changed my devicedriver to one that was more safe regarding lost interrupts it worked like a charm. Device driver? TDM device driver? Would you please explain what you did? Sorry, I was using zaptel patched with bristuff on asterisk 1.0.2 The driver was the bristuff zaphfc driver for Billion hfc isdn cards. Slackware 10, Linux kernel 2.4.26 on P4 2.8GHZ, libtiff 3.5.7 spandsp 0.2.0r6 After i applied Florians patch it all started working like a charm (Link to patch on wiki: asterisk zaphfc page) The patch decreases the risk for lost interrupts as far as I can understand. So I guess that that was my problem. /Nils ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] fax to email
This mail is in by no way a attempt to meddle. ok? Email to eg. txfax: --- If you are using sendmail, implement a ruleset that will forward all local mail for the toplevel domain .fax to a script. How to do this you will find in O'Reileys big sendmail book. It is important that the mail to the .fax domain is passing through your mailserver. In sendmail this is implemented by using the smarthost directive. How to write the script can be found in the voip-info wiki. Something like converting the mail to tiff. ascii2ps - ps2tiff or something like that. Then you create a asterisk call file to send the fax. Another way to do this would be to send the mail to a user [EMAIL PROTECTED] ( or whatever your asterisk server is called) Put the destination phonenumber in the subject line. Use an sendmail alias to forward all mail to user fax to the script. Eg: fax: |/bin/sendfax or something like that. (man aliases) Print to fax - O'reillys book on samba has information on smbfax. Otherwise it is easy to find information on this on google. The problem when you are printing is to get the destination phonenumber to the fax software. But as far i remember it is quite well dokumented, in the book or on the web. http://inconnu.isu.edu/~ink/new/projects/smbfax/ I'we implemented both of these cases a fews year ago, so it can be done. The third case was howto get the coversheet filled in. I think i used smbfax printing to a file and then seding the user an email with a link to a html form where he could fill in the cover sheet information, look at the tiff-file and then click ok to send the fax. Best regards Nils On Thu, 6 Jan 2005, Matthew Boehm wrote: Nope, I'm not in the documentation business. But you can go right down to your local book store and find many books on email systems. Try The qmail Handbook by Dave Sill. So this book will tell me exactly how to setup where if it gets an email from (ie [EMAIL PROTECTED]) that it passes it to Hylafax/Asterisk? Nope, I'm not in the documentation business. But you can go right down to your local bookstore and find many books on Samba. Try The Official Samba-3 HOWTO by Bruce Perens So this book will tell me exactly how to configure samba to send a print spool to Hylafax/Asterisk? Guess so. But you can go right down to your local computer store, purchase VB, and then write your own plug-in. Sorry, I don't use cheezy event driven languages. If you show a little effort on your part then maybe, just maybe, someone on this list might help you. I beg your pardon. I help people on this list everyday and I don't need you telling me to be more helpful. Plus, the same thing can be said for you right since you are not in the documentation business. Done with this, -Matthew ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Jan 6 Millard Fillmore's birthday (let's party!) --- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Busy message on ISDN cards?
Hi, I had the same problem when i tried i4l, and as far as I remember the solution was to set the outgoing msn to the msn of the isdn-line. From my old modem.conf: incomingmsn=* outgoingmsn=123456,123457 device = /dev/ttyI0 device = /dev/ttyI1 best regards, Nils On Sat, 1 Jan 2005, Eduardo López Martínez wrote: Hi all, I'm experiencing some problems with i4l and i can't find a solution. I'm using Eicon Diva 1 BRI Eicon Diva Server 4 Bri A ISDN PBX where I connect the first ISDN card (exten 204 in the ISDN PBX) and a ISDN phone (exten 210 in the ISDN PBX) Suse 8.1 with ISDN4Linux Asterisk 1.0 I'm trying to make phone calls from a softphone (Windows Messenger 4.6) to the ISDN phone but I get this: Asterisk Ready. *CLI -- Executing Dial(SIP/edu-ee6e, Modem/g1/204:210) in new stack Urgent handler Jan 1 18:51:19 WARNING[29364]: chan_modem_i4l.c:601 i4l_dial: Outgoing MSN edu not allowed (see outgoingmsn=,*, in modem.conf) -- Called g1/204:210 Urgent handler -- Modem[i4l]/ttyI0 is busy Urgent handler -- Hungup 'Modem[i4l]/ttyI0' Urgent handler Urgent handler == Everyone is busy/congested at this time == Auto fallthrough, channel 'SIP/edu-ee6e' status is 'CHANUNAVAIL' Urgent handler I see how the modem activates using imon (ISDN monitor) and tries to connect. When I add outgoingmsn=edu in modem.conf the modem does not respond, and I get the following: Asterisk Ready. *CLI -- Executing Dial(SIP/edu-c490, Modem/g1/204:210) in new stack Urgent handler Urgent handler -- Called g1/204:210 (...long time passed...) Urgent handler -- Hungup 'Modem[i4l]/ttyI0' Urgent handler Urgent handler Jan 1 18:58:55 WARNING[29394]: chan_sip.c:694 retrans_pkt: Maximum retries exceeded on call [EMAIL PROTECTED] for seqno 1 (Critical Response) Calls from the ISDN phone to a softphone WORK. Can anyone help me??? Thanks in advance ;) Eduardo. My configuration is the following: ** modem.conf ** [interfaces] context=INCOMING_ISDN driver=i4l language=en type=autodetect dtmfmode=i4l dialtype=tone mode=immediate group=1 msn=204 incomingmsn=*,0,210 outgoingmsn=* device=/dev/ttyI0 ;device=/dev/ttyI1 ;device=/dev/ttyI2 ;device=/dev/ttyI3 ;device=/dev/ttyI4 ;device=/dev/ttyI5 ;device=/dev/ttyI6 ;device=/dev/ttyI7 *** extensions.conf *** [INCOMING-SIP] exten=6000,1,Dial,SIP/edu exten=7000,1,Dial,SIP/edu2 exten=4000,1,Dial,Modem/g1/204:210 [INCOMING_ISDN] exten=s,1,Wait(1) exten=s,2,Answer exten=s,3,Dial,SIP/edu * sip.conf * [edu] type=friend username=edu host=dynamic diallow=all allow=gsm ;allow=ulaw allow=alaw ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Jan 1 Anniversary of the Triumph of the Revolution in Cuba Jan 1 Castro expels Cuban President Batista, 1959 Jan 1 Churchill delivers his Iron Curtain speech, 1947 Jan 1 First Rose Bowl; Michigan 49 - Stanford 0, 1902 Jan 1 ATT officially divests its local Bell companies, 1984 Jan 1 The Epoch (Time 0 for UNIX systems, Midnight GMT, 1970) --- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] how to debug frame slips?
Hi, I have had problems with receiving faxes with rxfax. Using bristuff with four hfc cards and spandsp 0.2.0 pre6 I got the symptoms of frame slips. I've tried all the debugging tips in this thread. I've tried moving from kernel 2.4 to 2.6.7. The only symptom of something wrong has been the 32k interrupts per second generated by the zaphfc driver. All the time the sound quality when listening has been good. Applying the patch from Florian Zumbiehl to zaphfc seems to have solved my problems. The number of generated interrupts when the system was idle decreased drastically. Thanks Florian! Link to the patch can be found at the wiki: http://www.voip-info.org/tiki-index.php?page=Asterisk%20zaphfc /Nils On Mon, 27 Dec 2004, Joe Presto wrote: Hi, I'm running into issues receiving faxes which, from what I have read, may be caused by frame slips. While I can find many posts saying to investigate it, I can't find any that describe *how* to debug the problem. Tried searching this list as well to no avail. Any pointers would be greatly appreciated. FYI, I'm running wbel, AMP 1.04, spandsp 2pre4. Faxing to a pstn on a t400p. Most faxes don't get received at all, but those that do have what appear to be the traditional signs: horizontal lines, most of the page cut off, etc.. And here's a basic linux question as a followup: if I try different hardware, can I use the existing build - or do I need to rebuild linux to properly detect the changed devices? Thanks in advance - Joe Presto Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Recomended ISDN for Asterisk ?
On Mon, 6 Dec 2004, HBK wrote: Hi I have installed the http://asteriskathome.sourceforge.net/ with a Digium card with no problems, very good ! Now I want to install my Billion PCI ISDN card (HFC based) in TE mode. I get a little confused with Isdn4Linux, ZapHFC HIAX and the need to install Capi ! Please suggest best and easiest approach ? Hi, The easy way to do it would be to use ISDN4LINUX and modem.conf I don't think capi doesnt support billion PCI. zaphfc requires that you rebuild your asterisk from cvs. This is what I had in my modem.conf when I used a billion card with I4L [interfaces] context=remote driver=i4l language=en type=autodetect dialtype=tone mode=immediate group=1 msn=018543210 incomingmsn=* outgoingmsn=543210,543211 device = /dev/ttyI0 device = /dev/ttyI1 And in extensions.conf For outgoing: exten=_0.,2,dial(Modem/g1:${EXTEN:1}) For incoming: exten = 018543210,1,goto(default,21,1) exten = 018543211,1,goto(default,23,1) Or something like that.. The quality whas ok. /Nils Thank you ! HB Norway ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Nils Segerdahl --- Upsala Systemkonsult, UPSYS AB Telefon:(+46) (0)18 56 80 41 Glunten, 751 83 UppsalaMobil: (+46) (0)703 55 65 03 http://www.upsys.seFax: (+46) (0)18 56 80 49 --- Dec 7 Japan bombs Pearl Harbor, 1941 --- ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users