Re: [asterisk-users] failing to start asterisk on centos7
Hello support, Am not winning need your help. ive tried putting a different version of asterisk on centos 7 and here are below results, after make config; [root@localhost asterisk-14.2.1]# make config [root@localhost asterisk-14.2.1]# sudo service asterisk start Starting asterisk (via systemctl): [ OK ] [root@localhost asterisk-14.2.1]# asterisk -rvv bash: asterisk: command not found [root@localhost asterisk-14.2.1]# which asterisk /usr/bin/which: no asterisk in (/sbin:/bin:/usr/sbin:/usr/bin) [root@localhost asterisk-14.2.1]# asterisk c bash: asterisk: command not found regards On Mon, Dec 12, 2016 at 11:30 AM, A J Stiles <asterisk_l...@earthshod.co.uk> wrote: > On Saturday 10 Dec 2016, christopher kamutumwa wrote: > > ive installed asterisk but below is what am getting proces gets > > killed.please help > > > > Make sure you have libncurses5 and its development files installed, > otherwise > this can cause crashes. > > Also, how much RAM is in your box? Check Asterisk is not being killed for > running out of memory. > > -- > AJS > > Note: Originating address only accepts e-mail from list! If replying off- > list, change address to asterisk1list at earthshod dot co dot uk . > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk. > org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] failing to start asterisk on centos7
Yes-bash: /usr/sbin/asterisk: No such file or directory”. Where is the asterisk binary located? There's a high likelihood that that’s the problem. where is itlocated how do i find it and what do i need to do. i tried it on centos 6.8 and i had same error. where am i going wrong? chris On Sat, Dec 10, 2016 at 10:48 PM, Tech Support <aster...@voipbusiness.us> wrote: > Hello; > > Way down at the bottom of your post you're getting an error that says > “-bash: /usr/sbin/asterisk: No such file or directory”. Where is the > asterisk binary located? There's a high likelihood that that’s the problem. > > Regards; > > John V. > > > > *From:* asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- > boun...@lists.digium.com] *On Behalf Of *christopher kamutumwa > *Sent:* Saturday, December 10, 2016 1:24 PM > *To:* asterisk-users > *Subject:* [asterisk-users] failing to start asterisk on centos7 > > > > ive installed asterisk but below is what am getting proces gets > killed.please help > > > > [root@localhost sounds]# asterisk -c > > Asterisk 13.13.1, Copyright (C) 1999 - 2014, Digium, Inc. and others. > > Created by Mark Spencer <marks...@digium.com> > > Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for > details. > > This is free software, with components licensed under the GNU General > Public > > License version 2 and other licenses; you are welcome to redistribute it > under > > certain conditions. Type 'core show license' for details. > > = > > [root@localhost sounds]# asterisk -c > > -bash: /usr/sbin/asterisk: No such file or directory > > [root@localhost sounds]# asterisk -r > > -bash: /usr/sbin/asterisk: No such file or directory > > [root@localhost sounds]# asterisk > > -bash: /usr/sbin/asterisk: No such file or directory > > [root@localhost sounds]# > > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk. > org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] failing to start asterisk on centos7
ive installed asterisk but below is what am getting proces gets killed.please help [root@localhost sounds]# asterisk -c Asterisk 13.13.1, Copyright (C) 1999 - 2014, Digium, Inc. and others. Created by Mark SpencerAsterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. = [ Initializing Custom Configuration Options ] == Parsing '/etc/asterisk/extconfig.conf': Found == Parsing '/etc/asterisk/asterisk.conf': Found == Manager registered action DBGet == Manager registered action DBPut == Manager registered action DBDel == Manager registered action DBDelTree PBX UUID: 36c0be35-766e-46c4-be1f-96479afa1e2b == Registered 'audio' codec 'g723' at sample rate '8000' with id '1' == Created cached format with name 'g723' == Registered 'audio' codec 'ulaw' at sample rate '8000' with id '2' == Created cached format with name 'ulaw' == Registered 'audio' codec 'alaw' at sample rate '8000' with id '3' == Created cached format with name 'alaw' == Registered 'audio' codec 'gsm' at sample rate '8000' with id '4' == Created cached format with name 'gsm' == Registered 'audio' codec 'g726' at sample rate '8000' with id '5' == Created cached format with name 'g726' == Registered 'audio' codec 'g726aal2' at sample rate '8000' with id '6' == Created cached format with name 'g726aal2' == Registered 'audio' codec 'adpcm' at sample rate '8000' with id '7' == Created cached format with name 'adpcm' == Registered 'audio' codec 'slin' at sample rate '8000' with id '8' == Created cached format with name 'slin' == Registered 'audio' codec 'slin' at sample rate '12000' with id '9' == Created cached format with name 'slin12' == Registered 'audio' codec 'slin' at sample rate '16000' with id '10' == Created cached format with name 'slin16' == Registered 'audio' codec 'slin' at sample rate '24000' with id '11' == Created cached format with name 'slin24' == Registered 'audio' codec 'slin' at sample rate '32000' with id '12' == Created cached format with name 'slin32' == Registered 'audio' codec 'slin' at sample rate '44100' with id '13' == Created cached format with name 'slin44' == Registered 'audio' codec 'slin' at sample rate '48000' with id '14' == Created cached format with name 'slin48' == Registered 'audio' codec 'slin' at sample rate '96000' with id '15' == Created cached format with name 'slin96' == Registered 'audio' codec 'slin' at sample rate '192000' with id '16' == Created cached format with name 'slin192' == Registered 'audio' codec 'lpc10' at sample rate '8000' with id '17' == Created cached format with name 'lpc10' == Registered 'audio' codec 'g729' at sample rate '8000' with id '18' == Created cached format with name 'g729' == Registered 'audio' codec 'speex' at sample rate '8000' with id '19' == Created cached format with name 'speex' == Registered 'audio' codec 'speex' at sample rate '16000' with id '20' == Created cached format with name 'speex16' == Registered 'audio' codec 'speex' at sample rate '32000' with id '21' == Created cached format with name 'speex32' == Registered 'audio' codec 'ilbc' at sample rate '8000' with id '22' == Created cached format with name 'ilbc' == Registered 'audio' codec 'g722' at sample rate '16000' with id '23' == Created cached format with name 'g722' == Registered 'audio' codec 'siren7' at sample rate '16000' with id '24' == Created cached format with name 'siren7' == Registered 'audio' codec 'siren14' at sample rate '32000' with id '25' == Created cached format with name 'siren14' == Registered 'audio' codec 'testlaw' at sample rate '8000' with id '26' == Created cached format with name 'testlaw' == Registered 'audio' codec 'g719' at sample rate '48000' with id '27' == Created cached format with name 'g719' == Registered 'audio' codec 'opus' at sample rate '48000' with id '28' == Created cached format with name 'opus' == Registered 'image' codec 'jpeg' at sample rate '0' with id '29' == Created cached format with name 'jpeg' == Registered 'image' codec 'png' at sample rate '0' with id '30' == Created cached format with name 'png' == Registered 'video' codec 'h261' at sample rate '1000' with id '31' == Created cached format with name 'h261' == Registered 'video' codec 'h263' at sample rate '1000' with id '32' == Created cached format with name 'h263' == Registered 'video' codec 'h263p' at sample rate '1000' with id '33' == Created cached format with name 'h263p' == Registered 'video' codec 'h264' at sample rate '1000' with id '34' == Created cached format with name 'h264' == Registered 'video' codec 'mpeg4' at
Re: [asterisk-users] Asterisk dahai install centos 7
Package kernel-devel-3.10.0-327.36.3.el7.x86_64 already installed and latest version but i still receive the same error [root@localhost dahdi-linux-complete-2.11.1+2.11.1]# make make -C linux all make[1]: Entering directory `/usr/src/dahdi-linux- complete-2.11.1+2.11.1/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory `/usr/src/dahdi-linux- complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware' make[2]: Leaving directory `/usr/src/dahdi-linux- complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 3.10.0-327.el7.x86_64 kernel installed. make[1]: *** [modules] Error 1 On Sat, Dec 10, 2016 at 4:56 PM, Greg Woods <g...@gregandeva.net> wrote: > > On Sat, Dec 10, 2016 at 7:47 AM, christopher kamutumwa < > chriskamutu...@gmail.com> wrote: > >> You do not appear to have the sources for the 3.10.0-327.el7.x86_64 >> kernel installed. > > > You need to install the kernel-devel package to compile kernel modules. > > --Greg > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk. > org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk dahai install centos 7
Hello support am trying to install dahdi on centos 7 and am doing the make ommand and below is result any way out this You do not appear to have the sources for the 3.10.0-327.el7.x86_64 kernel installed. uname -a gives me below; Linux localhost.localdomain 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux [root@localhost dahdi-linux-complete-2.11.1+2.11.1]# make make -C linux all make[1]: Entering directory `/usr/src/dahdi-linux-complete-2.11.1+2.11.1/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory `/usr/src/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware' make[2]: Leaving directory `/usr/src/dahdi-linux-complete-2.11.1+2.11.1/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 3.10.0-327.el7.x86_64 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/dahdi-linux-complete-2.11.1+2.11.1/linux' make: *** [all] Error 2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] bash: asterisk: command not found
Hello Ive installed asterisk 14.2 on centos 6.8 but i am not able to start it below is what am executing and those are the errors anything am doing wrong? [root@localhost ~]# asterisk -r bash: asterisk: command not found [root@localhost ~]# asterisk -vvvc bash: asterisk: command not found chris -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk install challenge
am new to asterisk and am trying to "make all". or dahdi install but in only reach this stage below on centos 6.8 . Any idea how to resolve or bypass this configure: creating ./config.status ./configure: line 18858: cannot create temp file for here-document: No such file or directory configure: error: write failure creating ./config.status make: *** [all] Error 1 Thanks, Chris -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] MOBILE SIMCARD ON ASTERISK
Is it possible to have a simcard configured and become incoming line and outgoing on asterisk and also have the IVR function? If yes wat hardware is required to have this Accompished Thanks Chris -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk Installation
Goodday users Am quite new to asterisk and trying to configure it with an fxo and fxs digium card. also i need a gui interface implemented. I have a centos 6.8 server any tutorial i could use for install and configuration? would appreciate. Thanks Chris -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Wildcard AEX800 digium card asterisk configuration
hello, i recently purchased a Wildcard AEX800 digium card. Ive installed asterisk 13 and all prerequistses on ubuntu serv14.04 LTS. Dahi is the driver am using; ive configured all but when i call from PSTN through fxo port an not getting anything in logs or to extensions. below are error messages [2016-10-14 15:08:12] WARNING[1820] chan_dahdi.c: Channel '1-4' failure ignored: ignore_failed_channels. [2016-10-14 15:08:12] WARNING[1820] chan_dahdi.c: Unable to specify channel 5: No such device or address [2016-10-14 15:08:12] ERROR[1820] chan_dahdi.c: Unable to open channel 5: No such device or address [2016-10-14 15:08:12] ERROR[1820] chan_dahdi.c: Unable to register channel '5-8' [2016-10-14 15:08:12] WARNING[1820] chan_dahdi.c: Channel '5-8' failure ignored: ignore_failed_channels. ubuntu*CLI> module load chan_dahdi.so Unable to load module chan_dahdi.so Command 'module load chan_dahdi.so' failed. [2016-10-14 15:10:35] WARNING[2401]: loader.c:1073 load_resource: Module 'chan_dahdi.so' already exists. ubuntu*CLI> module unload chan_dadhi.so Unable to unload resource chan_dadhi.so Command 'module unload chan_dadhi.so ' failed. my config please help system.conf loadzone = za defaultzone =za fxsks=1 echocanceller=mg2,1 fxsks=2 echocanceller=mg2,2 fxsks=3 echocanceller=mg2,3 fxsks=4 echocanceller=mg2,4 fxoks=5 echocanceller=mg2,5 fxoks=6 echocanceller=mg2,6 fxoks=7 echocanceller=mg2,7 fxoks=8 echocanceller=mg2,8 chan dahdi.conf [trunkgroups] ; No trunk groups are needed in this configuration. [channels] #include /etc/asterisk/dahdi-channels.conf ; The channels context is used when defining channels using the ; older deprecated method. Don't use this as a section name. ;[phone](!) ; ; A template to hold common options for all phones. ; usecallerid = yes hidecallerid = no callwaiting = yes threewaycalling = yes transfer = yes echocancel = yes echocancelwhenbridged = yes ;immediate = no rxgain = 0.0 txgain = 0.0 ;FXS Modules group = 1 echocancel = yes signalling = fxo_ks context = Internal channel = 1-4 ;FXO Modules group = 2 echocancel = yes signalling = fxs_ks context = Incoming channel = 5-8 voicemail.conf [default] 1234 => 4242,chris kamutumwa,root@localhost 1000 => 1234,chris kamutumwa,chriskamutu...@gmail.com 2000 => 1234,chris utumwa,ch...@crystaline.co.zm ~ ~ extension.conf [Internal] exten => 1000,1,Dial (DAHDI/1,20,rt) exten => 1000,2,Voicemail (1000,u) exten => 1000,102,Voicemail (1000,b) exten => 2000,1,Dial (DAHDI/2,20,rt) exten => 2000,2,Voicemail (2000,u) exten => 2000,102,Voicemail (2000,b) exten => 8500,1,VoiceMailMain exten => 8501,1,MusicOnHold exten => _9.,1,Dail (DAHDI/g2/www${EXTEN:1} ) exten => _9.,2,Congestion [Incoming] exten => s,1,Answer exten => s,2,Dial(DAHDI/g1,20,rt) exten => s,3,Voicemail(1000,u) exten => s,103,Voicemail(1000,b) root@ubuntu:/etc/asterisk# lsdahdi ### Span 1: WCTDM/0 "Wildcard AEX800" (MASTER) 1 FXO RED 2 FXO RED 3 FXO RED 4 FXO RED 5 FXS 6 FXS 7 FXS 8 FXS root@ubuntu:/etc/asterisk# dahdi_cfg -vvv DAHDI Tools Version - 2.11.1 DAHDI Version: 2.11.1 Echo Canceller(s): Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06) Channel 07: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07) Channel 08: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08) 8 channels to configure. Setting echocan for channel 1 to mg2 Setting echocan for channel 2 to mg2 Setting echocan for channel 3 to mg2 Setting echocan for channel 4 to mg2 Setting echocan for channel 5 to mg2 Setting echocan for channel 6 to mg2 Setting echocan for channel 7 to mg2 Setting echocan for channel 8 to mg2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Wildcard AEX800 digium card asterisk configuration
hello, i recently purchased a Wildcard AEX800 digium card. Ive installed asterisk 13 and all prerequistses on ubuntu serv14.04 LTS. Dahi is the driver am using; ive configured all but when i call from PSTN through fxo port an not getting anything in logs or to extensions. below are my config please help system.conf loadzone = za defaultzone =za fxsks=1 echocanceller=mg2,1 fxsks=2 echocanceller=mg2,2 fxsks=3 echocanceller=mg2,3 fxsks=4 echocanceller=mg2,4 fxoks=5 echocanceller=mg2,5 fxoks=6 echocanceller=mg2,6 fxoks=7 echocanceller=mg2,7 fxoks=8 echocanceller=mg2,8 chan dahdi.conf [trunkgroups] ; No trunk groups are needed in this configuration. [channels] #include /etc/asterisk/dahdi-channels.conf ; The channels context is used when defining channels using the ; older deprecated method. Don't use this as a section name. ;[phone](!) ; ; A template to hold common options for all phones. ; usecallerid = yes hidecallerid = no callwaiting = yes threewaycalling = yes transfer = yes echocancel = yes echocancelwhenbridged = yes ;immediate = no rxgain = 0.0 txgain = 0.0 ;FXS Modules group = 1 echocancel = yes signalling = fxo_ks context = Internal channel = 1-4 ;FXO Modules group = 2 echocancel = yes signalling = fxs_ks context = Incoming channel = 5-8 voicemail.conf [default] 1234 => 4242,chris kamutumwa,root@localhost 1000 => 1234,chris kamutumwa,chriskamutu...@gmail.com 2000 => 1234,chris utumwa,ch...@crystaline.co.zm ~ ~ extension.conf [Internal] exten => 1000,1,Dial (DAHDI/1,20,rt) exten => 1000,2,Voicemail (1000,u) exten => 1000,102,Voicemail (1000,b) exten => 2000,1,Dial (DAHDI/2,20,rt) exten => 2000,2,Voicemail (2000,u) exten => 2000,102,Voicemail (2000,b) exten => 8500,1,VoiceMailMain exten => 8501,1,MusicOnHold exten => _9.,1,Dail (DAHDI/g2/www${EXTEN:1} ) exten => _9.,2,Congestion [Incoming] exten => s,1,Answer exten => s,2,Dial(DAHDI/g1,20,rt) exten => s,3,Voicemail(1000,u) exten => s,103,Voicemail(1000,b) root@ubuntu:/etc/asterisk# lsdahdi ### Span 1: WCTDM/0 "Wildcard AEX800" (MASTER) 1 FXO RED 2 FXO RED 3 FXO RED 4 FXO RED 5 FXS 6 FXS 7 FXS 8 FXS root@ubuntu:/etc/asterisk# dahdi_cfg -vvv DAHDI Tools Version - 2.11.1 DAHDI Version: 2.11.1 Echo Canceller(s): Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06) Channel 07: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07) Channel 08: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08) 8 channels to configure. Setting echocan for channel 1 to mg2 Setting echocan for channel 2 to mg2 Setting echocan for channel 3 to mg2 Setting echocan for channel 4 to mg2 Setting echocan for channel 5 to mg2 Setting echocan for channel 6 to mg2 Setting echocan for channel 7 to mg2 Setting echocan for channel 8 to mg2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk 12 error when installing
Hello, Am trying to install asterisk 12 on ubuntu 14.04lts and am getting the below error after a MAKE any hints how to go round this? bedit.a -> asterisk asterisk.o: file not recognized: File truncated collect2: error: ld returned 1 exit status make[1]: *** [asterisk] Error 1 make: *** [main] Error 2 regards chris -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Error when installing asterisk on Ubuntu 16.03LTS
Hello, I am trying to install asterisk 14 on ubuntu 16 but i am getting below error message please assist with how to resolve that after i run make && make install && make config && make samples [LD] astdb2bdb.o db1-ast/libdb1.a -> astdb2bdb [CPP] chan_unistim.c -> chan_unistim.i [CCi] chan_unistim.i -> chan_unistim.o [LD] chan_unistim.o -> chan_unistim.so /usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/5/crtbeginT.o: relocation R_X86_64_32 against `__TMC_END__' can not be used when making a shared object; recompile with -fPIC /usr/lib/gcc/x86_64-linux-gnu/5/crtbeginT.o: error adding symbols: Bad value collect2: error: ld returned 1 exit status /usr/src/asterisk-14.0.2/Makefile.rules:176: recipe for target 'chan_unistim.so' failed make[1]: *** [chan_unistim.so] Error 1 Makefile:397: recipe for target 'channels' failed make: *** [channels] Error 2 thanks chri -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users