[Asterisk-Users] 3 - TDM31B Card Installation Difficulty
Hi, o I purchased 3 TDM31B cards and fixed them in my computer (in 3 PCI slots) o I downloaded the latest Zaptel source from CVS, compiled it and loaded modules zaptel.o and wctdm.o. o I successfully configured them from /etc/zaptel.conf as shown in the information below. ztcfg returned no errors - see the report below. o I successfully configured /etc/asterisk/zapata.conf (see info below). o I configured an X-Lite phone to test with an analog phone plugged into one of the channels. The problems are: o I cannot make a call from the analog phone (Saachi phone, KX-T3223) connected to one of the FXS ports. When I pick up the receiver, I hear the dialtone but when I press the buttons, asterisk seems not to get the numbers dialled, both using pulse and touch tone dialling. o I can call the analog phone from X-Lite however on receiving, I cannot hear much voice. What I hear is choppy sound corresponding to whatever I say from the analog side. When someone speaks from the X-lite side, nothing is heard from the analog phone. o There are three FXS ports where there is no dialtone - but the phone is actually powered - I can hear touch tone / pulse when I dial. o There are three FXS ports that give neither power nor dialtone. What could the problem be? Any help will be highly appreciated. Please find below abit of information I thought may be useful. Please let me know if more is needed. EXTRA INFORMATION - linux:/usr/src/new # uname -a Linux linux 2.4.20-4GB #1 Mon Mar 17 17:54:44 UTC 2003 i686 unknown unknown GNU/Linux linux:/usr/src/new # linux:/usr/src/new # ztcfg -vvv Zaptel Configuration == Channel map: Channel 01: FXO Loopstart (Default) (Slaves: 01) Channel 02: FXO Loopstart (Default) (Slaves: 02) Channel 03: FXO Loopstart (Default) (Slaves: 03) Channel 04: FXS Loopstart (Default) (Slaves: 04) Channel 05: FXO Loopstart (Default) (Slaves: 05) Channel 06: FXO Loopstart (Default) (Slaves: 06) Channel 07: FXO Loopstart (Default) (Slaves: 07) Channel 08: FXS Loopstart (Default) (Slaves: 08) Channel 09: FXO Loopstart (Default) (Slaves: 09) Channel 10: FXO Loopstart (Default) (Slaves: 10) Channel 11: FXO Loopstart (Default) (Slaves: 11) Channel 12: FXS Loopstart (Default) (Slaves: 12) 12 channels configured. linux:/usr/src/new # /etc/zaptel.conf: fxols=1-3 fxols=5-7 fxols=9-11 fxsls=4,8,12 loadzone = us defaultzone=us /etc/asterisk/zapata.conf: [channels] signalling=fxo_ls echocancel=16 echocancelwhenbridged=yes is in milliseconds pulsedial=yes group=1 context=default callprogress=yes busydetect=1 busycount=7 relaxdtmf=yes channel = 9-11 channel = 1-3 channel = 5-7 signalling=fxs_ls group=2 context=incoming channel= 4,8,12 Gerald. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 3 - TDM31B Card Installation Difficulty
Begumisa Gerald M wrote: o I can call the analog phone from X-Lite however on receiving, I cannot hear much voice. What I hear is choppy sound corresponding to whatever I say from the analog side. When someone speaks from the X-lite side, nothing is heard from the analog phone. If you call from X-Lite to the demo menus can you hear them clearly (no choppy sound)? Given the problems you are having this might point to a bad TDM100P card. I recently had to swap out a TDM100P card (rev H) for a replacement (rev G) card because the card apparently wasn't supplying correct timing for Asterisk. This even affected X-Lite to demo calls where the FXO and FXS modules weren't even being used. The way to check is to switch to the ztdummy driver instead of the TDM100P driver and see if the X-Lite - demo calls become clear. I don't know if was a defective card or a REV H issue, but now at least working. The other symptoms in my case were no dialtone through the FXS card and the FXO card not answering incoming calls. Steve ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 3 - TDM31B Card Installation Difficulty
Hi Steve, If you call from X-Lite to the demo menus can you hear them clearly (no choppy sound)? Actually I can't - the sound is still choppy! Interesting. When I unload the zaptel and wctdm modules the problem goes away (I can hear the demo files quite clearly from the X-Lite phone). Given the problems you are having this might point to a bad TDM100P card. Mmm. I have a spare one. I'll replace the one that doesn't give dialtone and see what happens. Thanks alot Steve. I'll fix the card and let you know what happens. Rgds, Gerald. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 3 - TDM31B Card Installation Difficulty
Begumisa Gerald M wrote: Mmm. I have a spare one. I'll replace the one that doesn't give dialtone and see what happens. I'm not jumping to any conclusions, but please note the revision of the card you're taking out and the rev of the card you're putting in. In my case the modules on the card were perfectly fine - it's the backbone card itself that supplies the timing and had the problem. Thanks alot Steve. I'll fix the card and let you know what happens. I'm very much a newbie myself, but I seem to be (only) a couple of days ahead of you :-) Rgds, Gerald. Steve ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
