[asterisk-users] Asterisk and QSIG
Hello, I'm looking for info about interconnecting asterisk to QSIG GF enabled PABX over PRI . Any information and pointers will be helpful. The very first first question: does asterisk support QSIG BC and GF natively i see that it is supported through CAPI enabled cards but what about support through librip/dahdi? Thanks Vadim ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk and Qsig Protocol
Hi All. Somebody works with asterisk linked in ISDN PRI with protocol QSIG with some PABX as Siemens, Philips, etc. The applications as pickup between asterisk and the PABX function? The names in the display and the number of the origin also? Which features that they can be used between the equipments? Best Regards Josué ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk and Qsig
Hi All. Somebody works with asterisk linked in ISDN PRI with protocol QSIG with some PABX as Siemens, Philips, etc. The applications as pickup between asterisk and the PABX function? The names in the display and the number of the origin also? Which features that they can be used between the equipments? Best Regards Josué ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk and QSIG
Hi everybody, Now we are looking to interconnect * with a Philips PBX using an S0 interface and the QSIG protocol. Looking in the wiki I see that's possible to define the switchtype as qsig. Somebody have had any experience integrating * with QSIG? Are QSIG fully integrated in *? Regards. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk and qsig
Well, I've temporary connected asterisk to a Cisco E1 (which is configured to use QSIG). Cisco debugs show: Aug 18 13:15:05.973: %CONTROLLER-5-UPDOWN: Controller E1 1/1, changed state to up Aug 18 13:15:05.989: ISDN Se1/1:15: TX -> SABMEp c/r=1 sapi=0 tei=0 Aug 18 13:15:06.330: ISDN Se1/1:15: RX <- BAD FRAME(0x02017F) Aug 18 13:15:06.987: ISDN Se1/1:15: TX -> SABMEp c/r=1 sapi=0 tei=0 Aug 18 13:15:07.339: ISDN Se1/1:15: RX <- BAD FRAME(0x02017F) Aug 18 13:15:08.020: ISDN Se1/1:15: TX -> SABMEp c/r=1 sapi=0 tei=0 Aug 18 13:15:08.349: ISDN Se1/1:15: RX <- BAD FRAME(0x02017F) Aug 18 13:15:09.022: ISDN Se1/1:15: TX -> SABMEp c/r=1 sapi=0 tei=0 Aug 18 13:15:09.355: ISDN Se1/1:15: RX <- BAD FRAME(0x02017F) Aug 18 13:15:10.032: ISDN Se1/1:15: Event: received NL_REL_IND I suppose the question now is: how easy is it to hack libpri qsig? I find it interesting that it's not been implemented yet, one would think alot of people must have needed it at some point in time. :) Any feedback, pointers, reports about previous efforts, and opinions about complexity/timeframe required are absolutely welcome. al. I am planning on doing something similar but with a Nortel MICS... apparently there is rudimentary QSIG support in Asterisk, but unfortunately the MICS won't do QSIG unless you tell it it's outside of North America (which I presume will screw up all the standard progress tones we Canucks are used to) :-) Nortel does have something proprietary called MCDN which I am hoping to reverse engineer enough of to be able to light the MWI on their phones. -A. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _ Get ready for school! Find articles, homework help and more in the Back to School Guide! http://special.msn.com/network/04backtoschool.armx ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk and qsig
On Tuesday 17 August 2004 21:00, aleph lammim wrote: > I need to make asterisk connect to another device over a pri using QSIG > signalling (master/slave). Is this feasible and has it been done before? I am planning on doing something similar but with a Nortel MICS... apparently there is rudimentary QSIG support in Asterisk, but unfortunately the MICS won't do QSIG unless you tell it it's outside of North America (which I presume will screw up all the standard progress tones we Canucks are used to) :-) Nortel does have something proprietary called MCDN which I am hoping to reverse engineer enough of to be able to light the MWI on their phones. -A. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] asterisk and qsig
Guys, I need to make asterisk connect to another device over a pri using QSIG signalling (master/slave). Is this feasible and has it been done before? Thank you! al. _ Get ready for school! Find articles, homework help and more in the Back to School Guide! http://special.msn.com/network/04backtoschool.armx ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users