I am planning on dabbling with some VOIP providers.
I was thinking of Teliax first.
My thinking is that the first LD call would go to teliax and the second
(etc.) calls would go out to the PSTN.
I could then verify bandwidth and quality to decide when to add more trunks
and to Internet connections.
I have been doing some concept testing with FWD for toll free calls, but I
am using 393 as a trunk access code.
Question:
Will Asterisk know that the one Teliax circuit is in use and use a different
trunk?
How would I make the dialplan to use a different trunk if the Teliax one is
busy?
Currently I have:
[outrt-003-dial9]
include = outrt-003-dial9-custom
exten = _9.,1,Macro(hoodahek,${ARG1})
exten = _9.,2,Macro(dialout-trunk,1,${EXTEN:1},) ;or could be
Dial(Zap/g1/${EXTEN}) ;exten = _9.,3,Macro(outisbusy) ; No available
circuits
;Since this is a PRI group, I am not sure how it's internals work. I do not
see it say channel 1 is busy, channel 2 is busy using channel 3 in the logs.
would I just change it to:
[outrt-003-dial9]
include = outrt-003-dial9-custom
exten = _9.,1,Macro(hoodahek,${ARG1})
exten = _9.,2,Macro(dialout-trunk,4,${EXTEN:1},) ;or could be
Dial(IAX2/Teliax1${EXTEN}) ; Will it skip this if it is in use or down?
exten = _9.,3,Macro(dialout-trunk,1,${EXTEN:1},) ;or could be
Dial(Zap/g1/${EXTEN})
exten = _9.,4,Macro(outisbusy) ; No available circuits
?
--
--
Steven
May you have the peace and freedom that come from abandoning all hope of
having a better past.
---- --- - - - -- - - -- - - - --- - -- -
- --- - - -- - -- -- - --
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users