RE: [Asterisk-Users] Grandstream GXP-2000 Auto Answer

2005-12-17 Thread Rob Thomas 

> Check http://www.voip-info.org/wiki-Asterisk+Paging+and+Intercom
> 
> >From that article:
> There is an 'allpage.agi' now available at
> http://aussievoip.com.au/allpage.agi. Documentation is available in

I'm the author of that, and I've actually re-written it, because I was
pretty unhappy with the way it checked for in-use devices, etc.

I'll update the wiki and post the patched one later today, hopefully.

--Rob

___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Grandstream GXP-2000 Auto Answer

2005-12-17 Thread Julian J. M. 
Check http://www.voip-info.org/wiki-Asterisk+Paging+and+Intercom

>From that article:
There is an 'allpage.agi' now available at
http://aussievoip.com.au/allpage.agi. Documentation is available in
the file. This should work with Snom and Grandstream GXP2000 phones
(and possibly budgettones if they roll the changes across) with
firmware greater than 1.0.13 (not publically available at time of
writing, due out in October 2005)

I've used that with my GXP-2000, and seems to work ok. I had, however,
to adapt it to my needs.

Regards
Julian J. M.

On 12/17/05, William M. Sandiford <[EMAIL PROTECTED]> wrote:
>
> Has anyone been successful getting Auto-Answer by Call-Info to work with the
> GXP 2000
>
> I have followed the suggestions in
>
> http://www.voip-info.org/wiki/view/GXP-2000
>
> Specifically I have:
>
> 1.  Upgraded to 1.0.1.13, which supposedly supports this feature
> 2.  Set Allow Auto-Answer by Call-Info to YES in the GXP2000 config
> 3.  Used, SIPAddHeader(Call Info: answer-after=0) in my dialplan prior to
> the Dial command.
>
> Still the phone just rings, and doesn't auto-answer.
>
> Any suggestions?
>
> Thanks in advance,
> Bill
> ___
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Grandstream GXP-2000 Auto Answer

2005-12-17 Thread William M. Sandiford 



Has anyone been 
successful getting Auto-Answer by Call-Info to work with the GXP 
2000
 
I have followed the 
suggestions in
 
http://www.voip-info.org/wiki/view/GXP-2000
 
Specifically I 
have:
 
1.  Upgraded to 
1.0.1.13, which supposedly supports this feature
2.  Set Allow 
Auto-Answer by Call-Info to YES in the GXP2000 config
3.  Used, 
SIPAddHeader(Call Info: answer-after=0) in my dialplan prior to the Dial 
command.
 
Still the phone just 
rings, and doesn't auto-answer.
 
Any 
suggestions?
 
Thanks in advance, 

Bill
___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users