Re: [Asterisk-Users] MFC/R2 errors
Hello, Just out of curiosity, what E1 card are you using in Asterisk? Best Regards, -- Telmo On Mon Dec 20 8:19 , 'Guillermo Freige' [EMAIL PROTECTED] sent: MFCR2 is hanging under heavy load in my configuration. It always segfaults in the same point. This is the coredump debug. During segfaults, the call structure points to an invalid area. (gdb) list 584 uc_log(uc, UC_LOG_FLOW, Far end disconnected - state 0x%X\n, call-state); 585 586 /* Don't stop the tone detector here. */ 587 588 if (call-chan = 0) 589 uc-chan[call-chan].state = UC_STATE_FAR_DISCONNECTED; 590 /*endif*/ 591 call-state = UC_STATE_FAR_DISCONNECTED; 592 593 ev.fardisconnected.e = UC_EVENT_FARDISCONNECTED; (gdb) bt #0 0x4081c81d in start_far_disconnected (uc=0x8128058, call=0x81dd1f0) at mfcr2.c:589 #1 0x405c91ad in uc_schedule_run (uc=0x8128058) at simplesched.c:124 #2 0x405b3378 in unicall_read (ast=0x40c05590) at chan_unicall.c:2081 #3 0x0805c26d in ast_read (chan=0x40c05590) at channel.c:1304 #4 0x405b8901 in unicall_bridge (c0=0x8202350, c1=0x40c05590, flags=0, fo=0xbb5faaa4, rc=0xbb5faaa8) at chan_unicall.c:1794 #5 0x0805fe16 in ast_channel_bridge (c0=0x8202350, c1=0x40c05590, config=0xbb5fb334, fo=0xbb5faaa4, rc=0xbb5faaa8) at channel.c:2611 #6 0x4038e775 in ast_bridge_call (chan=0x8202350, peer=0x40c05590, config=0xbb5fb334) at res_features.c:348 #7 0x40892b24 in dial_exec (chan=0x8202350, data=0x50) at app_dial.c:1006 #8 0x0807476f in pbx_exec (c=0x8202350, app=0x40905e08, data=0xbb5fd864, newstack=1) at pbx.c:469 #9 0x0807c803 in pbx_extension_helper (c=0x8202350, context=0x82024a8 operador, exten=0x820259c s, priority=11, callerid=0x0, action=135093791) at pbx.c:1277 #10 0x080767d8 in ast_pbx_run (c=0x8202350) at pbx.c:1758 #11 0x0807ce31 in pbx_thread (data=0xc0436a10) at pbx.c:1981 #12 0x40024e51 in pthread_start_thread () from /lib/libpthread.so.0 #13 0x401ec6ca in clone () from /lib/libc.so.6 Also I'm having trouble with the MFC dialog. Under load, I have a lot of T1 and T2 timeouts, mostly because I never hear the Rx off event in outgoing calls in the 3rd digit of a group of 4, and it generates a Protocol Error. After that the line keeps a Call flag rendering it unusable for further calls. When the number of blocked lines or the load makes the outgoing lines reach the incoming lines, so the same line is used for both incoming and outgoing calls, asterisk blocks the line and enters in a CPU intensive loop, locking the line. Guillermo _ MSN Amor: busca tu � naranja http://latam.msn.com/amor/ ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users SeeqMail - the only email you'll ever need Starts Here Sign up for FREE personalized email today: http://www.seeqmail.com http://www.Grassroots.org/ - Make Change! ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] MFC/R2 errors
Hi Sam, You can ignore that. Its just debug. The next version will make it configurable. Steve Sam Njenga wrote: Hi all I have MFCR2 successfully installed but seems to get warnings a s seen below when I start asterisk. Am running on Redhat 9. Asterisk Ready. *CLI Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired and so on -- UC channel 1 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 1 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 2 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 2 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 3 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 3 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 4 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 4 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 5 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 5 local unblocked ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] MFC/R2 errors
Thanks Steve, I still haven't had any success with it even after ignoring those warnings. Does any one have a working one ? If so can he send me working samples of zapata.conf unicall.conf extensions.conf Am using Argentina valiant of R2 - Original Message - From: Steve Underwood [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Monday, December 20, 2004 4:33 PM Subject: Re: [Asterisk-Users] MFC/R2 errors Hi Sam, You can ignore that. Its just debug. The next version will make it configurable. Steve Sam Njenga wrote: Hi all I have MFCR2 successfully installed but seems to get warnings a s seen below when I start asterisk. Am running on Redhat 9. Asterisk Ready. *CLI Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired and so on -- UC channel 1 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 1 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 2 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 2 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 3 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 3 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 4 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 4 local unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 5 far unblocked Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 5 local unblocked ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] MFC/R2 errors
Hi Sam, So what happens? Your logs shows a perfectly normal startup. The E1 should then be waiting for an outgoing or incoming call attempt. You should see *something* happen in the log. The example configuration information in the install instructions should be OK to get you started. extensions.conf just needs to send calls to trunk names like UniCall/1 for circuit number 1. Regards, Steve Sam Njenga wrote: Thanks Steve, I still haven't had any success with it even after ignoring those warnings. Does any one have a working one ? If so can he send me working samples of zapata.conf unicall.conf extensions.conf Am using Argentina valiant of R2 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] MFC/R2 errors
MFCR2 is hanging under heavy load in my configuration. It always segfaults in the same point. This is the coredump debug. During segfaults, the call structure points to an invalid area. (gdb) list 584 uc_log(uc, UC_LOG_FLOW, Far end disconnected - state 0x%X\n, call-state); 585 586 /* Don't stop the tone detector here. */ 587 588 if (call-chan = 0) 589 uc-chan[call-chan].state = UC_STATE_FAR_DISCONNECTED; 590 /*endif*/ 591 call-state = UC_STATE_FAR_DISCONNECTED; 592 593 ev.fardisconnected.e = UC_EVENT_FARDISCONNECTED; (gdb) bt #0 0x4081c81d in start_far_disconnected (uc=0x8128058, call=0x81dd1f0) at mfcr2.c:589 #1 0x405c91ad in uc_schedule_run (uc=0x8128058) at simplesched.c:124 #2 0x405b3378 in unicall_read (ast=0x40c05590) at chan_unicall.c:2081 #3 0x0805c26d in ast_read (chan=0x40c05590) at channel.c:1304 #4 0x405b8901 in unicall_bridge (c0=0x8202350, c1=0x40c05590, flags=0, fo=0xbb5faaa4, rc=0xbb5faaa8) at chan_unicall.c:1794 #5 0x0805fe16 in ast_channel_bridge (c0=0x8202350, c1=0x40c05590, config=0xbb5fb334, fo=0xbb5faaa4, rc=0xbb5faaa8) at channel.c:2611 #6 0x4038e775 in ast_bridge_call (chan=0x8202350, peer=0x40c05590, config=0xbb5fb334) at res_features.c:348 #7 0x40892b24 in dial_exec (chan=0x8202350, data=0x50) at app_dial.c:1006 #8 0x0807476f in pbx_exec (c=0x8202350, app=0x40905e08, data=0xbb5fd864, newstack=1) at pbx.c:469 #9 0x0807c803 in pbx_extension_helper (c=0x8202350, context=0x82024a8 operador, exten=0x820259c s, priority=11, callerid=0x0, action=135093791) at pbx.c:1277 #10 0x080767d8 in ast_pbx_run (c=0x8202350) at pbx.c:1758 #11 0x0807ce31 in pbx_thread (data=0xc0436a10) at pbx.c:1981 #12 0x40024e51 in pthread_start_thread () from /lib/libpthread.so.0 #13 0x401ec6ca in clone () from /lib/libc.so.6 Also I'm having trouble with the MFC dialog. Under load, I have a lot of T1 and T2 timeouts, mostly because I never hear the Rx off event in outgoing calls in the 3rd digit of a group of 4, and it generates a Protocol Error. After that the line keeps a Call flag rendering it unusable for further calls. When the number of blocked lines or the load makes the outgoing lines reach the incoming lines, so the same line is used for both incoming and outgoing calls, asterisk blocks the line and enters in a CPU intensive loop, locking the line. Guillermo _ MSN Amor: busca tu ½ naranja http://latam.msn.com/amor/ ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] MFC/R2 errors
I can now see and accept incoming calls from MFR2. Thanks again. Am only having a codec with my test software but that I will solve. (hopefully) But outgoing calls have a problem. Here is my current (basic) extensions.conf [general] static=yes writeprotect=no [globals] CONSOLE=Console/dsp ; Console interface for TRUNK=UniCall/1; Trunk interface [local] include = default [default] exten = _.,1,Dial(UniCall/1/${EXTEN} Problem is I can't dial out. Is that extensions file correct ? Here is my error *CLI Dec 20 20:08:05 WARNING[1160397504]: pbx.c:1279 pbx_extension_helper: No application 'Dial(UniCall/1/{EXTEN}' for extension (default, 24, 1) == Spawn extension (default, 24, 1) exited non-zero on 'H323/ip$X.X.X:4396/18867' Dec 20 20:08:05 WARNING[1160397504]: pbx.c:1279 pbx_extension_helper: No application 'Dial(UniCall/1/{EXTEN}' for extension (default, h, 1) == Spawn extension (default, h, 1) exited non-zero on 'H323/ip$X.X.X.X:4396/18867' As for the incoming here is the error that makes me rule that its a codec issue. (Correct if am wrong ) Dec 20 20:15:56 WARNING[1149912000]: chan_unicall.c:2548 handle_uc_event: UC event Answered Detected dry run! Dec 20 20:15:57 WARNING[1160397504]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 Call disconnected - state 0x800 -- Hungup 'UniCall/23-1' Res is þ¿ Silent Level is Pre-res is þ¿ I have prompts just for tests on asterisk and the amazing thing is that when I connect through ip directly I don't get any errors and I can hear the prompts /Sam - Original Message - From: Steve Underwood [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Monday, December 20, 2004 5:59 PM Subject: Re: [Asterisk-Users] MFC/R2 errors Hi Sam, So what happens? Your logs shows a perfectly normal startup. The E1 should then be waiting for an outgoing or incoming call attempt. You should see *something* happen in the log. The example configuration information in the install instructions should be OK to get you started. extensions.conf just needs to send calls to trunk names like UniCall/1 for circuit number 1. Regards, Steve Sam Njenga wrote: Thanks Steve, I still haven't had any success with it even after ignoring those warnings. Does any one have a working one ? If so can he send me working samples of zapata.conf unicall.conf extensions.conf Am using Argentina valiant of R2 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] MFC/R2 errors
Hi all I have MFCR2 successfully installed but seems to get warnings a s seen below when I start asterisk. Am running on Redhat 9. Asterisk Ready.*CLI Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expiredDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired and so on -- UC channel 1 far unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 1 local unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 2 far unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 2 local unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 3 far unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 3 local unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 4 far unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 4 local unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Far end unblocked -- UC channel 5 far unblockedDec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:2548 handle_uc_event: UC event Local end unblocked -- UC channel 5 local unblocked ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users