Re: [Asterisk-Users] Numbering Plan and Siemens EWSD

2004-07-19 Thread CW_ASN 
> Hi all,
>
> We're trying to hook up our Asterisk config (Card: TE410P) with a
> Siemens EWSD switch. The link is ok on both ends (green), with no errors.
>
> The problem is when we try to make a call from our side (via call
> files), we get the pri/E1 error
>Ext: 1  Cause: Temporary failure (41), class = Network Congestion (2)
>
> Our Telecom partner (they checked with Siemens) mentioned that we need
> to configure a dialplan as
>
> " numbering plan (Rec. E.164)
> The  stands for ISDN (Telephony), ISDN (Speech), etc"
>
> This is what they told us, but the closest we can configure in Asterisk
> is the pridialplan (unknown, private, local, national, international).
>
> We tried all of them, with no difference.
> We also tried them with callerid set, no advance.
>
>
> Anyone familiar with this other dialplan, or with the integration of
> Asterisk/E1 with a Siemens EWSD switch.
>
>
> pri debug log of the call below (this was with pridialplan set to
'unknown')
> and without callerid.
>
> -- Making new call for cr 32780
> > Protocol Discriminator: Q.931 (8)  len=32
> > Call Ref: len= 2 (reference 12/0xC) (Originator)
> > Message type: SETUP (5)
> > Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer
capability: Speech (0)
> >  Ext: 1  Trans mode/rate: 64kbps,
circuit-mode (16)
> >  Ext: 1  User information layer 1: A-Law
(35)
> > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive
Dchan:
> 0


As Bruno said, check that you are using euroisdn.

If you are not using ISDN equipment to dial thru pri, SETUP message is
wrong.

And please... change you pridial to local.
> > Called Number (len=12) [ Ext: 1  TON: Unknown Number Type (0)  NPI:
Unknown Number Plan (0) 'x' ]

Anyway, can you send a SIGNTRAC, or maybe a LTGTRAC (better to view more
deeply)?

Regards,

Gus



___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Numbering Plan and Siemens EWSD

2004-07-19 Thread Bruno Fontana 
I'm using * connected to a EWSD too through an older zaptel (card T400P) 
and there is no problem with PRI calls.
Did you put euroisdn?

[EMAIL PROTECTED] wrote:
Hi all,
We're trying to hook up our Asterisk config (Card: TE410P) with a
Siemens EWSD switch. The link is ok on both ends (green), with no errors.
The problem is when we try to make a call from our side (via call
files), we get the pri/E1 error 
   Ext: 1  Cause: Temporary failure (41), class = Network Congestion (2)

Our Telecom partner (they checked with Siemens) mentioned that we need
to configure a dialplan as 

" numbering plan (Rec. E.164)
The  stands for ISDN (Telephony), ISDN (Speech), etc"
This is what they told us, but the closest we can configure in Asterisk
is the pridialplan (unknown, private, local, national, international).
We tried all of them, with no difference.
We also tried them with callerid set, no advance.
Anyone familiar with this other dialplan, or with the integration of 
Asterisk/E1 with a Siemens EWSD switch.

pri debug log of the call below (this was with pridialplan set to 'unknown')
and without callerid.
-- Making new call for cr 32780
Protocol Discriminator: Q.931 (8)  len=32
Call Ref: len= 2 (reference 12/0xC) (Originator)
Message type: SETUP (5)
Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
Ext: 1  User information layer 1: A-Law (35)
Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan:
0
  ChanSel: Reserved
 Ext: 1  Coding: 0   Number Specified   Channel Type: 3
 Ext: 1  Channel: 1 ]
Calling Number (len= 4) [ Ext: 0  TON: Unknown Number Type (0)  NPI: Unknown Number 
Plan (0)
 Presentation: Unknown (67) '' ]
Called Number (len=12) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number 
Plan (0) 'x' ]
Sending Complete (len= 0)
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 32780/0x800C) (Terminator)
< Message type: CALL PROCEEDING (2)
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan:
0
 Channel Zap/1-1 was never answered.
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate 
Disconnect Request
Protocol Discriminator: Q.931 (8)  len=9
Call Ref: len= 2 (reference 12/0xC) (Originator)
Message type: RELEASE (77)
Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private 
network serving the local user (1)
Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
   -- Hungup 'Zap/1-1'
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 32780/0x800C) (Terminator)
< Message type: RELEASE COMPLETE (90)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Numbering Plan and Siemens EWSD

2004-07-19 Thread asterisk 
Hi all,

We're trying to hook up our Asterisk config (Card: TE410P) with a
Siemens EWSD switch. The link is ok on both ends (green), with no errors.

The problem is when we try to make a call from our side (via call
files), we get the pri/E1 error 
   Ext: 1  Cause: Temporary failure (41), class = Network Congestion (2)

Our Telecom partner (they checked with Siemens) mentioned that we need
to configure a dialplan as 

" numbering plan (Rec. E.164)
The  stands for ISDN (Telephony), ISDN (Speech), etc"

This is what they told us, but the closest we can configure in Asterisk
is the pridialplan (unknown, private, local, national, international).

We tried all of them, with no difference.
We also tried them with callerid set, no advance.


Anyone familiar with this other dialplan, or with the integration of 
Asterisk/E1 with a Siemens EWSD switch.


pri debug log of the call below (this was with pridialplan set to 'unknown')
and without callerid.

-- Making new call for cr 32780
> Protocol Discriminator: Q.931 (8)  len=32
> Call Ref: len= 2 (reference 12/0xC) (Originator)
> Message type: SETUP (5)
> Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech 
> (0)
>  Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
>  Ext: 1  User information layer 1: A-Law (35)
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan:
0
>ChanSel: Reserved
>   Ext: 1  Coding: 0   Number Specified   Channel Type: 3
>   Ext: 1  Channel: 1 ]
> Calling Number (len= 4) [ Ext: 0  TON: Unknown Number Type (0)  NPI: Unknown Number 
> Plan (0)
>   Presentation: Unknown (67) '' ]
> Called Number (len=12) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number 
> Plan (0) 'x' ]
> Sending Complete (len= 0)
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 32780/0x800C) (Terminator)
< Message type: CALL PROCEEDING (2)
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan:
0
 Channel Zap/1-1 was never answered.
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate 
Disconnect Request
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 12/0xC) (Originator)
> Message type: RELEASE (77)
> Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private 
> network serving the local user (1)
>  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
   -- Hungup 'Zap/1-1'
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 32780/0x800C) (Terminator)
< Message type: RELEASE COMPLETE (90)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users