Re: [Asterisk-Users] R2 implementation problem
I hope this link will help you. http://zarzamora.com.mx/asterisk/17 Regards Manuel Marin Garcia escribió: I have a TE110P connected to a Telmex E1 circuit with R2 signaling. Asterisk version= 1.0.10 Zaptel= 1.0.1 Spandsp=0.0.3pre6 Unicall= 0.0.3pre8 *zaptel.conf span=1,1,0,cas,hdb3 cas=1-15:1101 cas=17-31:1101 dchan=16 loadzone = us defaultzone=us *unicall.conf immediate=no loglevel=255 protocolclass=mfcr2 protocolvariant=mx,10,4 protocolend=cpe group = 1 context = telmex channel => 1-15 channel => 17-31 * *chan_unicall is compiled without any problems and when asterisk starts I see all channels in idle state. The problem is that I am unable to make or receive calls. When there is an incoming call I see the following Incoming Call (I receive 10 ANI digits and 4 DNIS digits) I suppose to receive 0875 for DNIS Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 <- 0001 [1/ 1/Idle /Idle ] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 Detected Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 Making a new call with CRN 32769 Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 1101 -> [2/ 2/Idle /Idle ] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:2865 handle_uc_event: Unicall/25 event Detected Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 <- 0 on [2/ 2/Seize ack /Seize ack] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 1 on -> [2/ 2/Seize ack /Seize ack] There is a 9 or 10 seconds pause and the I receive the following message. There is a busy tone in the caller side after the message Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 <- 1001 [2/ 2/Group A /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Far end disconnected(cause=Normal, unspecified cause [31]) - state 0x2 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 <- 0 off [2/ 800/Clear fwd /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1 off -> [2/ 800/Clear fwd /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 R2 prot. err. [2/ 800/Clear fwd /DNIS request ] cause 32774 - Invalid state Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1001 -> [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/27 event Far end disconnected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:3198 handle_uc_event: CRN 32769 - far disconnected cause=Normal, unspecified cause [31] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Call control(6) Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Drop call(cause=Normal Clearing [16]) Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1101 -> [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/27 event Protocol failure -- Unicall/27 protocol error. Cause 32774 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 0001 [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 Detected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 Making a new call with CRN 32769 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1101 -> [2/ 2/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/28 event Detected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 0 on [2/ 2/Seize ack /Seize ack] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 on -> [2/ 2/Seize ack /Seize ack] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 0 off [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 off -> [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 8 on [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 on -> [2/ 2/Group A /DNIS request ] *NOTE*: I Already tried changing values for DNIS and ANIS and same prob
[Asterisk-Users] R2 implementation problem
I have a TE110P connected to a Telmex E1 circuit with R2 signaling. Asterisk version= 1.0.10 Zaptel= 1.0.1 Spandsp=0.0.3pre6 Unicall= 0.0.3pre8 *zaptel.conf span=1,1,0,cas,hdb3 cas=1-15:1101 cas=17-31:1101 dchan=16 loadzone = us defaultzone=us *unicall.conf immediate=no loglevel=255 protocolclass=mfcr2 protocolvariant=mx,10,4 protocolend=cpe group = 1 context = telmex channel => 1-15 channel => 17-31 * *chan_unicall is compiled without any problems and when asterisk starts I see all channels in idle state. The problem is that I am unable to make or receive calls. When there is an incoming call I see the following Incoming Call (I receive 10 ANI digits and 4 DNIS digits) I suppose to receive 0875 for DNIS Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 <- 0001 [1/ 1/Idle /Idle ] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 Detected Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 Making a new call with CRN 32769 Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 1101 -> [2/ 2/Idle /Idle ] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:2865 handle_uc_event: Unicall/25 event Detected Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 <- 0 on [2/ 2/Seize ack /Seize ack] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 1 on -> [2/ 2/Seize ack /Seize ack] There is a 9 or 10 seconds pause and the I receive the following message. There is a busy tone in the caller side after the message Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 <- 1001 [2/ 2/Group A /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Far end disconnected(cause=Normal, unspecified cause [31]) - state 0x2 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 <- 0 off [2/ 800/Clear fwd /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1 off -> [2/ 800/Clear fwd /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 R2 prot. err. [2/ 800/Clear fwd /DNIS request ] cause 32774 - Invalid state Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1001 -> [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/27 event Far end disconnected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:3198 handle_uc_event: CRN 32769 - far disconnected cause=Normal, unspecified cause [31] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Call control(6) Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Drop call(cause=Normal Clearing [16]) Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1101 -> [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/27 event Protocol failure -- Unicall/27 protocol error. Cause 32774 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 0001 [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 Detected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 Making a new call with CRN 32769 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1101 -> [2/ 2/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/28 event Detected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 0 on [2/ 2/Seize ack /Seize ack] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 on -> [2/ 2/Seize ack /Seize ack] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 0 off [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 off -> [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 <- 8 on [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 on -> [2/ 2/Group A /DNIS request ] *NOTE*: I Already tried changing values for DNIS and ANIS and same problem I tried with other versions of spandsp and unicall and same problem The same occurs in Asterisk version 1.2.
