Yeah ..
Here's an update. It turns out I need to have a zaptel.conf
file !?? Ok, so I found that and I now have the followign
setup:
-
cat zaptel.conf <
loadzone=us
defaultzone=us
# Load FXS device (a TDM400P) as Channel #, and use
kewlstart FXO signalling
fxoks=1
# Load FXO device (a T100X) as Channel #, and use kewlstart
FXS signalling
fxsks=2
-
In my zapata.conf file, I have an entry for the TDM400P as
follows:
[channels]
language=en
group=1
context=from-sip
signalling=fxo_ks
mailbox = 2100
callerid = "Fedora" <2100>
channel => 1
--
Now, I have two SIP clients on my local LAN, [2000] and
[2100]. The mailbox is at [2999]
Locally (i.e. on the LAN, everything works, i.e., I can
place calls to all my extensions, and leave voice mail.
extension [2000] SIP using X-lite on a PC
extension [2001] SIP using X-lite on a Laptop (PC)
extension [2100] ZAP using the TDM400P board
When I run ztcfg -vv I am getting:
-
Zaptel Configuration
==
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
-
.. which looks OK to me.
Now, of course I need to tell asterisk about the FXO card,
so I add the following to zapata.conf ..
-
group=2
signalling=fxs_ks
channel => 2
-
and when I start asterisk, this is what shows ...
Parsing '/etc/asterisk/zapata.conf': Found
Registered channel 1, FXO Kewlstart signalling
WARNING Unable to specify channel 2: No such device
: Unable to open channel 2: No such device
here = 0, tmp->channel = 2, channel = 2
msetup_zap: Unable to register channel '2'
WARNING: mast_load_resource: load_module failed, returning
-1
-
Any ideas?
BTW: trying to make the X100P channel 1 does not help
either. ztcfg shows the channels, but asterisk will fail to
load.
Cheers,
Willy
- Original Message Follows -
> Did you compile the zap and lipri and installed ?
>
> /HHA
>
> > app_dial.c:533 dial_exec: Unable to create channel of
> > type 'ZAP'
>
>
>
>
> ___
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users