Re: [Asterisk-Users] Re: TE410P not Interrupting
Tony Mountifield wrote: In article [EMAIL PROTECTED], Eric Bishop [EMAIL PROTECTED] wrote: Hi all, Just got a brand new server and a Digium TE410P. I get the sequential (knight rider) lights before loading the zaptel driver. As soon as I load the driver all loghts go off. It appears the card is not generating interrupts. [EMAIL PROTECTED] ~]# cat /proc/interrupts CPU0 0: 111005341IO-APIC-edge timer 1: 9IO-APIC-edge i8042 8: 1IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 66IO-APIC-edge i8042 14: 7870IO-APIC-edge ide0 185: 0 IO-APIC-level t4xxp 193: 26141 IO-APIC-level cciss0 201:1139611 IO-APIC-level eth0 NMI: 0 LOC: 111010062 ERR: 0 MIS: 0 [EMAIL PROTECTED] ~]# Have also tried replacing the card, changinf PCI slots and messing with the BIOS all with the same result. If anyone can help I would be very grateful.. I have found this on one particular server (a 1U industrial server), and it was traced to a faulty backplane not connecting the IRQ line. As a test, try replacing the TE410P with a different PCI card that you know works in another computer, e.g. an Ethernet card. See if it initializes and generates interrupts. If not, then your problem is on the PCI bus somewhere. Cheers Tony ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Re: TE410P not Interrupting
Mark F. Vickers wrote: Tony Mountifield wrote: In article [EMAIL PROTECTED], Eric Bishop [EMAIL PROTECTED] wrote: Hi all, Just got a brand new server and a Digium TE410P. I get the sequential (knight rider) lights before loading the zaptel driver. As soon as I load the driver all loghts go off. It appears the card is not generating interrupts. [EMAIL PROTECTED] ~]# cat /proc/interrupts CPU0 0: 111005341IO-APIC-edge timer 1: 9IO-APIC-edge i8042 8: 1IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 66IO-APIC-edge i8042 14: 7870IO-APIC-edge ide0 185: 0 IO-APIC-level t4xxp 193: 26141 IO-APIC-level cciss0 201:1139611 IO-APIC-level eth0 NMI: 0 LOC: 111010062 ERR: 0 MIS: 0 [EMAIL PROTECTED] ~]# Have also tried replacing the card, changinf PCI slots and messing with the BIOS all with the same result. If anyone can help I would be very grateful.. I have found this on one particular server (a 1U industrial server), and it was traced to a faulty backplane not connecting the IRQ line. As a test, try replacing the TE410P with a different PCI card that you know works in another computer, e.g. an Ethernet card. See if it initializes and generates interrupts. If not, then your problem is on the PCI bus somewhere. Cheers Tony Eric, This can happen if the zaptel drivers are not properly modprobe -r'd before the system is shutdown. It has been mentioned on the wiki before. Try bringing up the system, modprobe'ing the modules, modprobe -r'ing them, and reboot. Then modprobe the modules and check the interrupts. What kind of mobo/chipset is this? -- Kristian Kielhofner ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: TE410P not Interrupting
In article [EMAIL PROTECTED], Eric Bishop [EMAIL PROTECTED] wrote: Hi all, Just got a brand new server and a Digium TE410P. I get the sequential (knight rider) lights before loading the zaptel driver. As soon as I load the driver all loghts go off. It appears the card is not generating interrupts. [EMAIL PROTECTED] ~]# cat /proc/interrupts CPU0 0: 111005341IO-APIC-edge timer 1: 9IO-APIC-edge i8042 8: 1IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 66IO-APIC-edge i8042 14: 7870IO-APIC-edge ide0 185: 0 IO-APIC-level t4xxp 193: 26141 IO-APIC-level cciss0 201:1139611 IO-APIC-level eth0 NMI: 0 LOC: 111010062 ERR: 0 MIS: 0 [EMAIL PROTECTED] ~]# Have also tried replacing the card, changinf PCI slots and messing with the BIOS all with the same result. If anyone can help I would be very grateful.. I have found this on one particular server (a 1U industrial server), and it was traced to a faulty backplane not connecting the IRQ line. As a test, try replacing the TE410P with a different PCI card that you know works in another computer, e.g. an Ethernet card. See if it initializes and generates interrupts. If not, then your problem is on the PCI bus somewhere. Cheers Tony -- Tony Mountifield Work: [EMAIL PROTECTED] - http://www.softins.co.uk Play: [EMAIL PROTECTED] - http://tony.mountifield.org ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
