RE: [Asterisk-Users] Sipura 2000 not answering em_w calls
Issue has been resolved. The short answer: The format of caller ID information on em_w trunks (maybe zap channels too) in zapata.conf can make it so the sipura will not anwser a call. Calls to the Sipura 2000 work fine from another sip device connected through *, from either an fxo or fxs (via adtran channel bank connected to a T400P card) port. However, when a call comes in from the phone company over a T1 with em_w trunks, the phone on the Sipura will ring but I can not answer it. Calls coming in from the phone company though em_w trunks work fine when terminated to analog phones (fxo_ks via a channel bank) or to another pbx analog trunks (fxs_ks via a channel bank) or to a Grandstream sip phone. On Monday, June 14, 2004 1:38 PM, mattf [SMTP:[EMAIL PROTECTED] wrote: Well, I don't think it's the sipura. We have 45 SPA-2000 adapters connected to 82 analog phones going through 3 asterisk servers all using EM Wink start T1s, and we have no problems with inbound or outbound on any of the sipura adapter-connected phones. I finally figured out the problem. The problem was that my callerID information in zapata.conf was in the format of callerid = DID trunk1 4024623600 instead of the format callerid = DID trunk14024623600 Notice the location of the quotation marks (). CallerID has worked fine on all other phones so it never dawned on me that this could be a callerID problem. Thanks mattf for pointing out that your sipuras were working which made me figure it had to be one of my configurations. Don Pobanz ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Sipura 2000 not answering em_w calls
I recently purchased a Sipura 2000 and connected a phone to it which is connected to my asterisk box via sip. Calls to the Sipura 2000 work fine from another sip device connected through *, from either an fxo or fxs (via adtran channel bank connected to a T400P card) port. However, when a call comes in from the phone company over a T1 with em_w trunks, the phone on the Sipura will ring but I can not answer it. With Sip debug set I will see a bunch of messages but the following messages seems important: 7 headers, 18 lines Jun 14 11:35:08 WARNING[4101]: chan_sip.c:2012 find_call: Call missing call ID from '192.168.50.119' (192.168.50.119 is the IP of my Sipura device) Calls coming in from the phone company though em_w trunks work fine when terminated to analog phones (fxo_ks via a channel bank) or to another pbx analog trunks (fxs_ks via a channel bank) or to a Grandstream sip phone. So, I do not know whether this is a Sipura 2000 problem or an * problem. Does anyone have any light to shine on the subject. Asterisk CVS-HEAD-06/14/04-09:03:15 built by [EMAIL PROTECTED] on a i686 running Linux Sipura 2000 software version 1.0.33 Don Pobanz ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Sipura 2000 not answering em_w calls
Well, I don't think it's the sipura. We have 45 SPA-2000 adapters connected to 82 analog phones going through 3 asterisk servers all using EM Wink start T1s, and we have no problems with inbound or outbound on any of the sipura adapter-connected phones. Post your sip.conf entry for your sipura device, as well as what line features you have activated on your sipura configuration. MATT--- -Original Message- From: Don Pobanz [mailto:[EMAIL PROTECTED] Sent: Monday, June 14, 2004 1:41 PM To: '[EMAIL PROTECTED]' Subject: [Asterisk-Users] Sipura 2000 not answering em_w calls I recently purchased a Sipura 2000 and connected a phone to it which is connected to my asterisk box via sip. Calls to the Sipura 2000 work fine from another sip device connected through *, from either an fxo or fxs (via adtran channel bank connected to a T400P card) port. However, when a call comes in from the phone company over a T1 with em_w trunks, the phone on the Sipura will ring but I can not answer it. With Sip debug set I will see a bunch of messages but the following messages seems important: 7 headers, 18 lines Jun 14 11:35:08 WARNING[4101]: chan_sip.c:2012 find_call: Call missing call ID from '192.168.50.119' (192.168.50.119 is the IP of my Sipura device) Calls coming in from the phone company though em_w trunks work fine when terminated to analog phones (fxo_ks via a channel bank) or to another pbx analog trunks (fxs_ks via a channel bank) or to a Grandstream sip phone. So, I do not know whether this is a Sipura 2000 problem or an * problem. Does anyone have any light to shine on the subject. Asterisk CVS-HEAD-06/14/04-09:03:15 built by [EMAIL PROTECTED] on a i686 running Linux Sipura 2000 software version 1.0.33 Don Pobanz ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
