Resolved: Re: [Asterisk-Users] Unknown signalling 896?
On Thu, 2005-03-17 at 09:40 +1300, David Zanetti wrote: > > > ERROR[2215]: Signalling requested is PRI Signalling but line is > > > in Unknown signalling 896 signalling > > > ERROR[2215]: Unable to register channel '1-30' > > > WARNING[2215]: chan_zap.so: load_module failed, returning -1 > > > WARNING[2215]: Loading module chan_zap.so failed! Helps if I remember it doesn't renumber the channels, you still carry over the 1-15,17-31 thing from /etc/zaptel.conf to /etc/asterisk/zapata.conf. (E1s here have their D channel as 16, the rest are B channels..) Opps. :) -- David Zanetti <[EMAIL PROTECTED]> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 signature.asc Description: This is a digitally signed message part ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unknown signalling 896?
On Wed, 2005-03-16 at 04:18 -0600, Eric Wieling wrote: > David Zanetti wrote: > > But * won't bring up chan_zap at all: > > > > ERROR[2215]: Signalling requested is PRI Signalling but line is > > in Unknown signalling 896 signalling > > ERROR[2215]: Unable to register channel '1-30' > > WARNING[2215]: chan_zap.so: load_module failed, returning -1 > > WARNING[2215]: Loading module chan_zap.so failed! > > > > Ideas? I'm sure it's something simple I've missed. :) > > > > Config fragments follow: > > Notice the [channels] lines at the top of the zaptel.conf.sample? You > need it. Ah, I just didn't paste that into the email from the fragments I chose. I didn't want to just post the whole file. It's there. * tries to configure them, just fails. -- David Zanetti <[EMAIL PROTECTED]> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 signature.asc Description: This is a digitally signed message part ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unknown signalling 896?
David Zanetti wrote: I've been beating my head a bit against the 1.0.6 Debian builds of Asterisk, using an E100P (E1, single span) board. In machines I've built in the past (back in 1.0.0 days), config I'm using and that card and 1.0.0 driver combo worked fine. ztcfg reports no problems: SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) 31 channels configured. And zttool sees the card, and reports it in the state I expect (there's no real E1 attached to it, so blue/red alarms..) But * won't bring up chan_zap at all: ERROR[2215]: Signalling requested is PRI Signalling but line is in Unknown signalling 896 signalling ERROR[2215]: Unable to register channel '1-30' WARNING[2215]: chan_zap.so: load_module failed, returning -1 WARNING[2215]: Loading module chan_zap.so failed! Ideas? I'm sure it's something simple I've missed. :) Config fragments follow: ==/etc/zaptel.conf== span=1,0,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nz defaultzone=nz ==end== ==/etc/asterisk/zapata.conf== context = default switchtype = euroisdn priindication = outofband group = 2 signalling = pri_cpe channel => 1-30 ==end== Notice the [channels] lines at the top of the zaptel.conf.sample? You need it. --Eric -- Always do right. This will gratify some people and astonish the rest. Mark Twain ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Unknown signalling 896?
I've been beating my head a bit against the 1.0.6 Debian builds of Asterisk, using an E100P (E1, single span) board. In machines I've built in the past (back in 1.0.0 days), config I'm using and that card and 1.0.0 driver combo worked fine. ztcfg reports no problems: SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) 31 channels configured. And zttool sees the card, and reports it in the state I expect (there's no real E1 attached to it, so blue/red alarms..) But * won't bring up chan_zap at all: ERROR[2215]: Signalling requested is PRI Signalling but line is in Unknown signalling 896 signalling ERROR[2215]: Unable to register channel '1-30' WARNING[2215]: chan_zap.so: load_module failed, returning -1 WARNING[2215]: Loading module chan_zap.so failed! Ideas? I'm sure it's something simple I've missed. :) Config fragments follow: ==/etc/zaptel.conf== span=1,0,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nz defaultzone=nz ==end== ==/etc/asterisk/zapata.conf== context = default switchtype = euroisdn priindication = outofband group = 2 signalling = pri_cpe channel => 1-30 ==end== Thanks. -- David Zanetti <[EMAIL PROTECTED]> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 signature.asc Description: This is a digitally signed message part ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users