Re: [Asterisk-Users] x100p issues + TDM400P
Hello, I have been wanting to use digium x100p to get started. But it seems to have compatibility issues for different regions. I am refering to the 600 ohm US pstn standard only. I am in India so If I were not to use x100p card then what card I need to go in for? I also read that x100p has been discontinued. I am being recommended TDM400P wildcard. Is it OK for India. Does TDM400P wildcard has FXO and FXS ? According to the Silicon Labs spec sheet, the chip set on the tdm card includes parameters for India (370 ohm). It should work. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] x100p issues + TDM400P
Does TDM400P wildcard has FXO and FXS ? This card as 4 ports, and on each port you can put an FXS or FXO module. So you can make any combination : 2 FXO and 2 FXS, 4 FXS, 4 FXO, etc HTH ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] x100p issues + TDM400P
Hello, I have been wanting to use digium x100p to get started. But it seems to have compatibility issues for different regions. I am refering to the 600 ohm US pstn standard only. I am in India so If I were not to use x100p card then what card I need to go in for? I also read that x100p has been discontinued. I am being recommended TDM400P wildcard. Is it OK for India. Does TDM400P wildcard has FXO and FXS ? Thanks in advance Varun ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] X100P and TDM400P non-USA Caller ID
Hi, -Original Message- Finland, Denmark, Iceland, Sweden, the Netherlands, Belgium, Brazil, Saudi Arabia, Uruguay,India all use DTMF So, logically the DTMF solution would be attacked first... but then I do have a bias.. Add it to: http://www.voip-info.org/wiki-Asterisk+bounty+non-Bellcore-CLID :-)) Florian ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] X100P and TDM400P non-USA Caller ID
I am sure that quite a lot of people would like to have Caller ID working with their X100P and TDM400P cards outside of USA. Judging from previous threads this is just a matter of implementing this support in the software driver! So, I was thinking, if we get together and put few $(USA DOLLARS) into a basket, we could then ask Digium to actually properly implement Caller ID for non USA countries. How many of you are prepared to do this? Can you nominate your country needing this this feature! Regards, SJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] X100P and TDM400P non-USA Caller ID
Finland, Denmark, Iceland, Sweden, the Netherlands, Belgium, Brazil, Saudi Arabia, Uruguay,India all use DTMF So, logically the DTMF solution would be attacked first... but then I do have a bias.. :D Andy *** REPLY SEPARATOR *** On 14/05/2004 at 20:32 Senad Jordanovic wrote: I am sure that quite a lot of people would like to have Caller ID working with their X100P and TDM400P cards outside of USA. Judging from previous threads this is just a matter of implementing this support in the software driver! So, I was thinking, if we get together and put few $(USA DOLLARS) into a basket, we could then ask Digium to actually properly implement Caller ID for non USA countries. How many of you are prepared to do this? Can you nominate your country needing this this feature! Regards, SJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] X100P and TDM400P non-USA Caller ID
How many of you are prepared to do this? Can you nominate your country needing this this feature! I can contribute financially with it also. Or saying better, I am crying for it for more than one year. I'm in Japan. NTT FSK and I have already all the documentation in english. I talked to Digium one time about that, but I've heard that it's not a priority. One year is passed. Isamar ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] X100P and TDM400P
Hi, Can incoming fax from X100P FXO received on TDM400P FXS port (which is connected to a fax machine)? If possible, at what speed, 14400 or 9600 baud rate? Thanks.